Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
doi	https://doi.org/10.52842/conf.ecaade.2002.472
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2011_072
id	caadria2011_072
authors	Gallas, Mohamed-Anis; Didier Bur and Gilles Halin
year	2011
title	Daylight and energy in the early phase of architectural design process: A design assistance method using designer’s intents
doi	https://doi.org/10.52842/conf.caadria.2011.761
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 761-770
summary	The integration of daylighting from the beginning of the design process can help designers to create buildings that respect their environment benefit from the solar gain thus giving an answer to illumination and energy needs (Bodart et al, 2002). This paper proposes a declarative assistance method/tool designed for the early design phase. This method assists the designer in integrating the daylight and its energetic impact from the beginning of the architectural design process by means of intents. The intents are related to the daylight, energy and spatial configuration aspects of the architectural project. The method translates the designer’s intents into potential solutions. They are the first formal representation of the architect’s intents that could be customized and altered during the next architectural design phases.
keywords	Daylight; energy; early design phase; design support; intents
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	1992
authors	Russell, Peter
year	2002
title	Using Higher Level Programming in Interdisciplinary teams as a means of training for Concurrent Engineering
doi	https://doi.org/10.52842/conf.ecaade.2002.014
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 14-19
summary	The paper explains a didactical method for training students that has been run three times to date. The premise of the course is to combine students from different faculties into interdisciplinary teams. These teams then have a complex problem to resolve within an extremely short time span. In light of recent works from Joy and Kurzweil, the theme Robotics was chosen as an exercise that is timely, interesting and related, but not central to the studies of the various faculties. In groups of 3 to 5, students from faculties of architecture, computer science and mechanical engineering are entrusted to design, build and program a robot which must successfully execute a prescribed set of actions in a competitive atmosphere. The entire course lasts ten days and culminates with the competitive evaluation. The robots must navigate a labyrinth, communicate with on another and be able to cover longer distances with some speed. In order to simplify the resources available to the students, the Lego Mindstorms Robotic syshed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).ural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosg and programming a winning robot. These differences became apparent early in the sessions and each group had to find ways to communicate their ideas and to collectively develop them by building on the strengths of each team member.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	4f57
authors	Nikiforiadis, Faidon and Pitts, Adrian
year	2002
title	A Study of the Accuracy of Daylighting Simulation of Heavily Obstructed Buildings in the Urban Canyons of Athens
doi	https://doi.org/10.52842/conf.ecaade.2002.456
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 456-463
summary	This paper deals with the use and evaluation of daylighting simulation tools in relation to a complex urban environment. The environment concerned is one commonly found in city centre areas where the proximity of buildings leads to the creation of ‘urban canyons’; the result of this is that assessment and simulation of daylight requires a more sophisticated approach than for other situations. In urban areas building layout is the most important factor effecting daylight, sunlight and solar heat gain reaching a building. It also affects sunlight in open spaces, ventilation, shelter and the dispersal of pollutants. In order to produce a more realistic understanding of the dynamic effects of daylight, there is a need not only for the research and development of advanced CAD and lighting simulation tools, but also of the study of possible alternative methods in their application. In the work reported in this paper, an attempt has been made to move the focus of lighting and daylighting simulation from the scale of a room to that of a whole building; the building itself being surrounded by its specific urban environment (including its microclimate). The study evaluates if there is sufficient evidence that it is possible with such complexity to reach reliable computation results after executing the simulation. The case study presented uses a 4D model of an urban canyon to investigate the sensitivity of such a complex simulation system. It can also be used to find ways to analyse and predict how daylight is reflected, refracted, scattered, diffused, polarised, diffracted and absorbed as it traverses an urban environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	12d9
authors	Anumba, C.J., Ugwu, O.O., Newnham, L. and Thorpe, A.
year	2002
title	Collaborative design of structures using intelligent agents
source	Automation in Construction 11 (1) (2002) pp. 89-103
summary	The construction industry has a long tradition of collaborative working between the members of a construction project team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design disciplines. To aid these meetings, the information and communications technologies that are currently available have been utilised. These have yielded some success but are hampered by the problems posed by the use of heterogeneous software tools and the lack of effective collaboration tools that are necessary to collapse the time and distance constraints, within which increasingly global design teams work. In particular, there are very few tools available to support distributed asynchronous collaboration. Distributed artificial intelligence, which is commonly implemented in the form of intelligent agents, offers considerable potential for the development of such tools. This paper examines some of the issues associated with the use of distributed artificial intelligence systems within the construction industry. It describes the potential for the use of agent technology in collaborative design and then goes on to present the key features of an agent-based system for the collaborative design of portal frame structures. An example is presented to demonstrate the working and benefits of the prototype system, which makes a significant contribution by allowing for peer to peer negotiation between the design agents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2010_73
id	sigradi2010_73
authors	Hunold, Lara Arthur; Gorge Canella Eduardo; Giacaglia Marcelo Eduardo; Corrêa Norberto; Moura da Silva
year	2010
title	Brinquedos, modelos: uma atividade lúdica se transforma em curricular com apoio das novas tecnologias de fabricação digital [Toys, models: a fun activity becomes curriculum, supported by new digital fabrication technologies]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 73-76
summary	This research seeks to assess the use of digital fabrication of toys reusing wood from earlier models produced in undergraduate courses in architecture and design. Froebel (2002) discusses the pedagogical application of blocks of wood that he created, inspired by the information that the architect Frank Lloyd Wright was influenced in his childhood by playing with toy blocks. Among other authors, we found a catalog from the Aladdin factory that is owned by Uruguayan modern artist Torres Garcia. The research aimed to recreate similar educational toys within a context of global crisis and interest in sustainability.
keywords	design education; design methodology; digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2006_179
id	caadria2006_179
authors	KEATRUANGKAMALA K., NILKAEW P.
year	2006
title	STRONG VALID INEQUALITY CONSTRAINTS FOR ARCHITECTURAL LAYOUT DESIGN OPTIMIZATION
doi	https://doi.org/10.52842/conf.caadria.2006.x.w5d
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 179-185
summary	In the past decades, many attempts have been made to solve the challenging architectural layout design problem such as non-linear programming and evolutionary algorithm (Michalek and Papalambros, 2002). The Mixed Integer Programming (MIP) (Kamol and Krung, 2005) was recently developed to find the global optimal solution. However, the problem can be shown to belong to the class of NP-hard problem (Michalek and Papalambros, 2002). Hence, only the small instances of the problem can be solved in a reasonable time. In order to deal with large problem sizes, this paper utilizes the strong valid inequalities (George and Laurence). It cut off the infeasible points in the integral search space by formulated the disconnected constraints involved with line configurations of three rooms. It is shown to significantly increase the computational speed to more than thirty percents. This exhibits the practical use of the MIP formulation to solve the medium size architectural layout design problems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	e5a6
authors	Senagala, Mahesh
year	2002
title	Time-like Architectures: The Emergence of Post-spatial Parametric Worlds
doi	https://doi.org/10.52842/conf.acadia.2002.069
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 69-76
summary	A new trend is emerging in architecture today: dynamic and time-like architectures (term derived fromthe language of Theory of Relativity) that are capable of moving, flexing and reconfiguring themselvesthrough globally networked control mechanisms are emerging. Such buildings maybe "pluggedinto" the information networks and can be manipulated through remote interaction. Architecture canbe published, literally. At this time there is no one theoretical framework available to address sucharchitectural efforts and the paper is aimed at providing a framework under the rubric of "TimelikeArchitectures". The paper addresses the unprecedented transformation of the spatial and temporalfoundations of architecture by a convergence of two technological developments: global real-timeinformation networks and kinetic, pneumatic tectonics. Envisioned and in some cases built by agroup of avant-garde architects, time-like architectures are poised to become a norm in a nottoo distant future. The paper will identify, define and outline few time-like works. The paper willalso outline the historical, theoretical and ethical relationships between post-spatial (authors term),post-modern and modern architectures using Charles Jencks’ structuralist classification,Evolutionary Tree.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	d145
authors	Senagala, Mahesh
year	2002
title	Time-like Architectures - The Emergence of Post-spatial Parametric Worlds
doi	https://doi.org/10.52842/conf.ecaade.2002.254
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 254-261
summary	A new trend is emerging in architecture today: dynamic and time-like architectures (term derived from the language of Theory of Relativity) that are capable of moving, flexing and reconfiguring themselves through globally networked control mechanisms are emerging. Such buildings maybe “plugged into” the information networks and can be manipulated through remote interaction. Architecture can be published, literally. At this time there is no one theoretical framework available to address such architectural efforts and the paper is aimed at providing a framework under the rubric of “Time-like Architectures”. The paper addresses the unprecedented transformation of the spatial and temporal foundations of architecture by a coming together of two technological developments: global real-time information networks and kinetic, pneumatic tectonics. Envisioned, and, in some cases built, by a group of avant-garde architects, time-like architectures are poised to become a norm in a not too distant future. The paper will identify, define and outline few time-like works. The paper will also outline the historical, theoretical and ethical relationships between post-spatial, post-modern and modern architectures using Charles Jencks’ structuralist classification, Evolutionary Tree.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	4219
authors	Wang, Shengwei and Wang, Jin-Bo
year	2002
title	Automatic sensor evaluation in BMS commissioning of building refrigeration systems
source	Automation in Construction 11 (1) (2002) pp. 59-73
summary	A strategy and software is developed to automatically diagnose and evaluate the Building Management Systems (BMS) sensors of building refrigeration systems during commissioning or periodical check (recommissioning). The strategy is based on the first law of thermodynamics (i.e., heat and mass balance of water networks). The strategy evaluates soft sensor faults (biases) by examining and minimizing the weighted sum of the squares of the concerned mass and/or steady state energy balance residuals represented by the corrected measurements over a period, on the basis of the measurements downloaded from BMS. A Genetic Algorithm is employed to determine the global minimal solution to the multimodal objective function, which can be difficult to achieve by traditional gradient-directed search methods. The sensor bias estimates, the confidence intervals of bias estimates and the comparisons of the balance residuals before and after the correction are generated by the software to provide a convenient and reliable means for the engineers to check and diagnose the measurement devices of BMS. The strategy, the software configuration and examples of application are presented in this paper.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0213
id	ddssar0213
authors	De Groot, Ellie and Paule, Bernard
year	2002
title	DIAL-Europe: New Functionality’s for an Integrated Daylighting Design Tool
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The European project DIAL-Europe started in April 2000 and intends to enhance and to enlarge the capabilities of the LesoDIAL software. The aim of this “Swiss” tool was to give architects relevant information regarding the use of daylight, at the very first stage of the design process. DIAL-Europe focuses on European standards and climatic data. Further, a Heating & Cooling evaluation module and an Artificial Lighting module will be added. The objective of the Heating & Cooling module is to indicate the implications of the user’s design on heating and cooling energy and on thermal comfort.The objective of Artificial Lighting module is to develop a tool that will give an estimation of illuminance values on the work plane and provide guidance on qualitative aspects and visual comfort as well as on switching control and integration with daylight based on generic light sources and luminaires. Furthermore, the scope of the examples of simulated rooms will be increased in order to allow the user to compare their design with more similar cases. This paper will present the state of achievement and give an overview of the first version of the DIAL-Europe software, which will beavailable at the beginning of 2002.
series	DDSS
last changed	2003/08/07 16:36

_id	073c
authors	Papamichael, Kostas and Pal, Vineeta
year	2002
title	Bridging the Gap Between Building Science and Designing Studios
doi	https://doi.org/10.52842/conf.caadria.2002.123
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 123-130
summary	Design studios and building science courses have been conducted independent of each other, mainly due to a lack of tools that allow quick and easy consideration of building science criteria, such as comfort and energy requirements, during the design process. Existing tools are not user-friendly and their use requires significant effort in gaining familiarity with the input requirements, understanding the modeling assumptions and interpreting the output. This paper is about the Building Design Advisor (BDA), an evolving computer-based tool intended to bridge the gap between design studios and building science considerations by addressing the above-mentioned limitations of existing tools. BDA allows automatic preparation of input files to multiple simulation tools while the user is working in a CAD environment. BDA automatically activates the relevant simulation tools when the user selects performance parameters to be computed and provides the results in a graphical form, allowing comparison of multiple design options with respect to multiple performance criteria. The paper includes considerations for the use of the BDA in the design studio and ends with a description of the current development efforts and future plans.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2008_008
id	ecaade2008_008
authors	Cypriano, Débora Z.; Celani, Gabriela
year	2008
title	Sloping Façade Buildings in Brazilian Modern Architecture
doi	https://doi.org/10.52842/conf.ecaade.2008.061
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 61-68
summary	Sloping façade buildings have been present throughout XXth century architecture, for different programs and in different countries. One of the first architects to use sloping façades was probably Frank Lloyd Wright, two early examples being Taliesin West (1937) and the Annie Pfeiffer Chapel at Florida Southern College (1938-41). In Brazilian Modern architecture sloping façades soon became a recurrent solution, the earlier examples being produced by architects Oscar Niemeyer, João V. Artigas and Affonso E. Reidy, possibly influenced by FLW, as suggested by Irigoyen (2002). The present research proposes that these buildings may have influenced other architects in Brazil and abroad. In order to confirm this hypothesis, a design process was modelled and a shape grammar was developed to describe a small corpus of buildings designed by these three architects in the 1940´s and 1950´s.
keywords	Sloping façade buildings, shape grammar, Brazilian modern architecture
series	eCAADe
email
last changed	2022/06/07 07:56

_id	0653
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and Rendering Virtual Architecture by Using Fisheye-Panorama-Based Images and Lightings in HDR-Quality
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 172-174
summary	We use digitally made spherical panoramas as background for vr visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirror-based). For this reason we had the idea to develop the first fisheye-based digitalscanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic-range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) spericalimages together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	a207
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and rendering virtual architecture by using fisheye-panorama-based images and lightings in HDR-quality
doi	https://doi.org/10.52842/conf.ecaade.2002.569
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 569-571
summary	We use digitally made spherical panoramas as background for vr-visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirrorbased). For this reason we had the idea to develop the first fisheye-based digital-scanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic- range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	eCAADe
email
last changed	2022/06/07 07:56

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ddssar0217
id	ddssar0217
authors	Kacher, S., Bignon, J.C., Halin, G. and Duffing, G.
year	2002
title	The Content-Based Image Retrieval as an Assistance Tool to the Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The architectural design requires a research of ideas and a documentation to help the designer in its creation work. It is a domain where the use of pictures (drawing, photography,…) is essential, because the information transmitted by photographic images are often more easily to understand than the one transmitted by texts. The goal of this work is to show the help that can bring the research of pictures indexed by visuals criteria, as colour, texture and shape, in the architectural design domain. If weaccept the principle that " an image is better than 10000 words ", we can make the hypothesis that an image research indexed by visual criteria can bring a supplementary help to the designer when he tries to resolve design problems. We tested a research tool resting on image indexation with graphic attributes. Two types of corpora have been used. The first one contains images illustrating building products and the second one shows buildings or parts of buildings, which illustrate the wood architecture domain. The objective of this experiment is to evaluate the relevance of this type of image indexing according to identified users needs. We try to determine which type of visual criteria is the most appropriate to help the designer in the various phases of the design process.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: