Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 488

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_595_49_delic
id	ecaade03_595_49_delic
authors	Delic, Davor and Turk, Ziga
year	2003
title	HYCE – Hyperlearning in Civil Engineering Curricula A Pilot Course in Implementation of Information Technology Course - a Case Study at the Faculty of Civil Engineering, University of Zagreb
doi	https://doi.org/10.52842/conf.ecaade.2003.595
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 595-600
summary	Outline of development of a revised base ITC course at the Faculty is shown here. The course, called Introduction To Information Technology Implementation is aimed for 2nd year students (3rd semester) of the study. For the first time it was held in the winter semester of 2002/03 as a pilot course replacing the old way of course delivery. This implementation was carried out through a “pathfinder” project WORMES from February 2002 till March 2003 and would be used as a template for future Hyperlearning implementation on other courses through other Faculty education programes. The objective was to establish continuous students teamwork around a problem – a project completely accomplished in IT surround. A slightly adapted methodology known as Hyperlearning – a version of Problem Based Learning, was chosen as a based learning methodology for a new way of course delivery. The gained results were really impressive. Not only efficiency of delivery was increased in many ways (less hours spent on exercises, better knowledge detaining...) but also huge enthusiasm among students was constantly maintained and their creativity was emphasized surprisingly. A lot of data were collected, analyzed and some of the results are published here.
keywords	Hyperlearning, Problem based learning, IT course development
series	eCAADe
email
more	http://www.grad.hr
last changed	2022/06/07 07:55

_id	9f9c
authors	Hu, Xiaochun
year	2002
title	An Information-based Framework for Composites Design
source	Drexel University
summary	The heterogeneity of composites determines that composite materials can be engineered to better satisfy a specific design requirement. The main problems that have hindered the application of composites are the need for the material and manufacturing design to be conducted simultaneously, the involvement of a large number of design factors, the difficulty in the characterization of composites, and the inherent repetition of the design process. Considering these problems, this thesis presents an information-based framework for composites design. This research consists of four main aspects: (1) The development of a heterogeneous CAD modeling algorithm and an integrated CAD/CAE method, and their application in a unit cell-based characterization of composite materials with a complex fiber form; (2)The development of a unit cell database for improving the material and manufacturing process design, which covers the design of its database model and the access strategies based on the logic architecture of unit cells and the relationships among elements of unit cells and with the environments; (3)The design of an Information-Based Design Support System (IBDSS) to support the composites design by using the unit cell database, in which the blackboard framework is adopted for the system to organize various computer techniques for different design stages, and to support the design iterating to satisfactory ones incrementally and efficiently, and the data structure of the blackboard, the algorithm to control design iterations, and design procedures for every stage are studied; and (4) The introduction of a ranking-based unit cell evaluation methodology and effective ranking factors for facilitating and improving the composite design process. The approach improves the efficiency of composites design by automating design iterations, supporting composite characterization, alleviating the cost of composite material and manufacturing method design, and assisting in tailored material selection. Case studies are presented to show how the IBDSS is applied to support composites design.
keywords	Mechanical Engineering
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	2d44
authors	Tsou, Jin-Yeu and Chow, Benny
year	2002
title	Integrating Scientific Simulation with Rapid-Prototyping Modeling for Design Curriculum Development
doi	https://doi.org/10.52842/conf.ecaade.2002.548
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 548-551
summary	Although Computer-Aided Architectural Design tools have been introduced to studios for design visualization and communication, tangible models constructed by cardboard or other modeling materials still play an important role in assisting students on developing their conceptual framework related to spatial organization. A Rapid Prototyping (RP) system could provide a paradigm shift from the existing workflow of hand-made architectural model into an automated computer-aided manufacturing (CAM) environment. The introduction of computer controlled manufacturing technology will not limit the use of current conventional model making, and it will provide new capabilities for precise scaled model making and the possibility to generate free-form surface models for design representation. Because the technical capabilities of RP system could dramatically change the design workflow, the computer-aided manufacturing approach for architectural design has been adopted by overseas and local academic institutions. In this paper, we report the findings of a pilot study that applied rapid prototyping technology in architectural design education for helping students exploring an automated computer-aided manufacturing environment during early stage of design development.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
doi	https://doi.org/10.52842/conf.ecaade.2002.386
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
wos	WOS:000340635300028
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	d5e1
authors	Bugajska, Malgorzata Maria
year	2002
title	Spatial Visualization of abstract Information: A Classification Model for Visual Spatial Design Guidelines in the Digital Domain
source	Swiss Federal Institute of Technology, ETH Zurich
summary	Visualization of abstract information refers to the design of graphical representations of information that has no simple relation to known concrete or physical forms. Designing visualizations of abstract information requires proposing visual representation for often a large body of data pants. determining a meaningful structure for the complex relations among them and suggesting a method for Interacting with this body of data. Spatial perception plays an Important role for cognitive processing when interacting with abstract information, slice spatially-organized Information can be accessed and operated on rapidly and effortlessly, especially when a spatial arrangement reveals the conceptual organization of Information. This thesis focuses on aspects of the spatial visual design of abstract information presented as computer-generated. dynamic and interactive images accessible through flat displays. The process of spatial visualization design is shaped by various factors including interactive, perceptual, navigational as well as organizational and metaphorical aspects and as such requires an interdisciplinary approach. Therefore, in researching spatial visual design. it is crucial to use methods facilitating the process of sharing competencies among different disciplines. In this thesis, we introduce a new classification model accommodating features important in designing effective spatial visualizations of abstract information. To enhance the effectiveness of spatial visualization, this model offers a holistic approach in classifiying spatial Visualization features. As part of the model, we analyze properties already used in architectural representation and other visual design disciplines for spatial presentations as well as investigate their potential usage in digital domains of abstract information. The process of spatial visualization In the digital environment is mostly based on the practical experience of a designer. and therefore the majority of spatial design know-how is heuristic in nature. Based on this assumption, we present a set of guidelines addressing the general problem of spatial design. The Spalial Design Classificahon Model, Visual Spatial Properties and Spatial Design Guidelines build an extendable infrastructure which becomes a first step towards augmenting the quality of spatial information design- We propose to use this infrastructure as a general blueprint for structuring the exchange of expertise in Interdisciplinary problem-solving processes.
series	thesis:PhD
last changed	2003/05/15 12:22

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	7683
authors	Healy, C.G. and Enns, J.T.
year	2002
title	Perception and Painting: A Search for Effective, Engaging Visualizations
source	Institute of Electrical and Electronics Engineers, Journal, March / April
summary	Scientific visualization represents information as images that allow us to explore, discover, analyze, and validate large collections of data. Much of the research in this area is dedicated to the design of effective visualizations that support specific analysis needs. Recently, we have become interested in a new idea: Is a visualization beautiful? Can a visualization be considered a work of art? One might expect answers to these questions to vary widely depending on the individual and their interpretation of what it means to be artistic. We believe that the issues of effectiveness and aesthetics may not be as independent as they might seem at first glance, however. Much can be learned from a study of two related disciplines: human psychophysics, and art theory and history. Perception teaches us how we "see" the world around us. Art history shows us how artistic masters captured our attention by designing works that evoke an emotional response. The common interest in visual attention provides an important bridge between these domains. We are using this bridge to produce visualizations that are both effective and engaging. This article describes our research, and discusses some of the lessons we have learned along the way.
series	journal paper
last changed	2003/04/23 15:50

_id	ddssar0216
id	ddssar0216
authors	Jones, Dennis B.
year	2002
title	The Quantum Matrix:A Three Dimensional Data Integration and Collaboration ToolFor Virtual Environments
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	If a picture is worth a thousand words, what if they could walk and talk? How would you like to bring a whole new dimension to your ideas; to use visualization to convey a sense of time and motion, to use imagery to give your ideas vividness; to use sound to give them voice and view them threedimensionally. The Matrix allows you to do all of this and much more. The Matrix resembles Rubik’s cube, but its purpose is to store, manage and access data of all types and to view them in three dimensions in virtual environments such as the CAVE and on your desktop. The current version can store, access and view almost anything that is in digital form, including:Text files Pictures Video Clips Sound Files Spreadsheets URL’s HTML pages Databases CAD drawings Gantt Charts Business Graphics VRML modelsExecutable Programs OLE (Object Link & Embedded) The Matrix is a three-dimensional multimedia and document management tool. The Matrix anticipates the convergence of electronic media into one consistent environment for analysis and representation. the Matrix uses VMRL and OpenGL technologies to allow the user to be immersed in their data as withCinerama, IMAX and Virtual Reality Environments. The Matrix allows the user to exercise their creativity by interactively placing and organizing their data three dimensionally and navigating through and viewingdata and documents in 3D (monocular and binocular – stereo). The Matrix user interface is simple to use. Employing the now familiar “drag and drop” method to manage data and documents. Items can be placed into the matrix grid at a user selected matrix cube location. Upon dropping a document on a cube it appears as a mapped image onto the surface. Navigating through the 3D Matrix-space is fun. All navigation uses real-time animation giving you instant feed back as to where you are. Data drilling is as simple as mouse click on a Matrix cube. Double clicking the on an object in the matrix activates that object. Data dreams was an image that preexisted the program by several years. The dream was to create a new way oforganizing and exploring data. The Qube image was created using Microstation by Bentley Systems, Inc. The figure was modeled using Poser by MetaCreations and composited using Adobe Photoshop.
series	DDSS
last changed	2003/08/07 16:36

_id	3a28
authors	Laiserin, Jerry
year	2002
title	From atelier to e-telier: virtual design studios
source	Architectural Record
summary	The design studio, as physical place and pedagogical method, is the core of architectural education. Ateliers clustered around rue Napoleon in Paris defined the École des Beaux Arts. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. From programs, schemes, and parti to desk crits, pin-ups, and charrettes-language and behavior learned in the studio establish the profession's cultural framework. Advances in CAD and visualization, combined with technologies to communicate images, data, and "live" action, now enable virtual dimensions of studio experience. Students no longer need gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up-if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to favor collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The catch is predicting whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	journal paper
last changed	2003/04/23 15:50

_id	5c30
authors	Linder, Mark and Clutter, McLain
year	2002
title	Modeling Urban Spaces: GIS and CAD Compared
doi	https://doi.org/10.52842/conf.acadia.2002.345
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 345-348
summary	This research is producing digital cartographic models of the urban space of Rome, NY. Workingbetween two software packages for spatial visualization that are now ubiquitous in architecture (FormZ)and geography (ArcView), the project takes an interdisciplinary approach to understanding howavailable data sources and modes of visualization enable or discourage particular understandings ofurban space. The project is designed specifically to work within, and develop, a critique of theconstraints of the two software packages. Rather than encouraging a deceptively smooth integration ofwhat may be fundamentally incommensurable forms of knowledge, this project begins with the premisethat vocabularies and conceptions of space vary considerably in various disciplines, as do the modes ofvisualization that each has developed to represent, document, examine, and produce space.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	3868
authors	Miller, J.J., Wang, W. and Jenkins, G.
year	2002
title	The Anthropometric Measurement and Modeling Project 2002
doi	https://doi.org/10.52842/conf.acadia.2002.389
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 389-393
summary	This paper describes a project that has been on-going since 2000 and consists of the followingactivities:• specification of Digital Human Models (DHM) for the visualization of people seated in wheelchairs,• extension of commercial off the shelf (COTS) software to enable the development of dynamicvisualizations of ‘data that makes data’ , and• subsequent construction of digital visualizations that are useful to designers in the creation ofartifacts and environments for human use.We have developed a process of ‘data that makes data’ which allows the visualization of any potentialor hypothetical physical interface between a human and an environment or artifact.Preliminary validation is provided by comparison with findings of other researchers. This work clearlysuggests a need for design-oriented software that contains robust ‘dynamic’ digital human modelscapable of creating visualization for any arbitrary context.
series	ACADIA
last changed	2022/06/07 07:58

_id	73e1
authors	Stouffs, Rudi and Cumming, Michael
year	2002
title	Visualizing Representational Structures for Improving Data Conceptualization
doi	https://doi.org/10.52842/conf.ecaade.2002.328
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 328-332
summary	Design problems require a multiplicity of viewpoints each distinguished by particular interests and emphases. Alternative viewpoints necessitate different representations of the same entity, albeit a building or building part, a shape or other complex attribute. Even within the same task and by the same person, various representations may serve alternative purposes defined by the problem context and the selected approach. Understanding a representational structure serves to comprehend its use within the context of one’s own intent. This requires the visualization of the representation and data, and the ability to manipulate and alter the data structure in order to explore its composition and scope and compare it to what may be desired or required. We report on an active research effort to provide a 3D graphical interface for the manipulation of representational and data structures in terms of composition and scope. The interface and system make use of a particular framework for representational flexibility. This additionally supports the integration of data functions into data structures for the purpose of querying derived data.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	0e4c
authors	Uddin, M. Saleh and Yoon, So-Yeon
year	2002
title	Peter Eisenman’s House X, Scheme G: 3D Game Engine for Portable Virtual Representation of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.526
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 526-531
summary	Recently introduced 3D games, game editors, along with gaming software offer great potential for delivering three-dimensional, collaborative virtual environments for online audiences. These capabilities have significant potential in architectural visualization. The University of Missouri-Columbia’s Emerging Technology Group developed the Virtual Campus Project introducing the university campus to prospective students through the Internet. Fascinating quality, seamless real time rendering, and smooth navigation are enough to impress visitors. However, the developers had to use eye measures and guesses based on photos rather than architectural drawings for initial 3D computer models. The absence of a precise scaling system as well as not being able to recognize a standard 3D architectural drawing format in a virtual environment were the prime generators of this paper. One important goal for this paper is to suggest architects the potentials of using universal or exchangeable formats of 3D models with accurate structure data to build virtual models. A second goal is to provide better understanding of potentials in 3D game engines for virtual representation of architecture.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ga0207
id	ga0207
authors	Fischer, T.
year	2002
title	Computation-Universal Voxel Automata as Material for Generative Design Education
source	International Conference on Generative Art
summary	This paper is a report on the educational application of a voxel automata system for massively parallel execution of computation-universal cellular units in the generative design field. The software, designed and co-developed by the author to enable developmental strategies in generative design - for example with respect to 3D design generation, semantic self-evaluation and self-replication - was applied in teaching at the School of Design at The Hong Kong Polytechnic University to achieve two goals: to teach programming as part of the School’s Interactive Systems Design stream and to teach generative concepts at a theoretical, yet hands-on and highly intensive level. An introduction to the software, its development and its functions as well as a discussion of the teaching/learning experience is given, highlighting design educational aspects and student design work. The paper concludes with an analysis of how student approaches to generative concepts have been affected by the tool and how ideas and feedback from students have supported the ongoing development of the voxel automata system and its documentation.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	1f68
authors	Perrone, Alessandro
year	2002
title	Agent-Based Design Modelling Using the Visual Swarm Builder
source	Gero JS and Brazier FMT (eds) (2002) Agents in Design 2002. Key Centre of Design Computing and Cognition, University of Sydney, pp. 153-164
summary	In this paper we describe a new product written to simplify the construction of Agent based simulations called Visual Swarm Builder. VSB is an integrated environment for the design and realization of simulations using Swarm libraries, based on menudriven and graphic selections of objects like graphs, "standard agents", etc. This paper is divided into three sections. It commences with an introduction about the need of an instrument like VSB, then there are parts dedicated to the simulation environment, Swarm, and finally there's the last parts in which there's described the package, with all the present and future features, and a short example designed with VSB.
series	other
email
last changed	2003/05/10 10:16

_id	63d1
authors	Rapid Prototyping Group Rapid Design and Manufacture Centre (RDM), Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, Bruce
year	2002
title	Rapid design and manufacture tools in architecture
source	Automation in Construction 11 (3) (2002) pp. 279-290
summary	The continuing development of Rapid Prototyping technologies and the introduction of Concept Modelling technologies means that their use is expanding into a greater range of applications. The primary aim of this paper is to give the reader an overview of the current state of the art in Layered Manufacturing (LM) technology and its applicability in the field of architecture. The paper reports on the findings of a benchmarking study, conducted by the Rapid Design and Manufacturing (RDM) Group in Glasgow [G.J. Ryder, A. McGown, W. Ion, G. Green, D. Harrison, B. Wood, Rapid Prototyping Feasibility Report, Rapid Prototyping Group, Glasgow School of Art, 1998.], which identified that the applicability of LM technologies in any application can be governed by a series of critical process and application specific issues. A further survey carried out by the RDM group investigated current model making practice, current 3D CAD use and current use of LM technologies within the field of architecture. The findings are then compared with the capabilities of LM technologies. Future research needs in this area are identified and briefly outlined.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ddssup0216
id	ddssup0216
authors	Saarloos, D.J.M., Arentze, T.A., Borgers, A.W.J. and Timmermans, H.J.P.
year	2002
title	Towards a Local Planning Support System,Introducing the MASQUE Framework
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban planning is an important instrument for improving the quality of life, but it is hampered by the fact that the effects of many decisions, to be made by the planner, are practically unknown or at best unclear. The high level of complexity, uncertainty and subjectivity involved in urban plan development is seriously troubling the planner. One way of facilitating the plan development process, and potentially improving the decision-making, is developing a Planning Support System (PSS) that combines artificialintelligence with a gamut of computational tools that support the process. At the Eindhoven University of Technology a research program is conducted to develop such a system for local urban planning in the Netherlands. The system, named MASQUE (Multi-Agent System for supporting the Quest forUrban Excellence), applies Multi-Agent technology to incorporate multidisciplinary expertise on both tools and domains as well as to enable intelligent guidance and assistance towards the user. Strong emphasis is put on the scenario-based way of working that is common in urban planning. This paper puts forward the difficulties faced in local planning practice and discusses the possibilities for computer-assistance. This finally resolves into the introduction of the MASQUE framework, describing how the system is organized and how the agents will be involved.
series	DDSS
last changed	2003/08/07 16:36

_id	864a
authors	Senagala, Mahesh and Masden, Kenneth
year	2002
title	Interrupted Interface - On the Cybernetics of Digital Design Process
doi	https://doi.org/10.52842/conf.ecaade.2002.168
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 168-172
summary	From the viewpoint of Batesonian cybernetics, ‘conscious purpose’ and ‘artistic process’ are distinct ends of a spectrum of the functioning of ‘self’. The conceptual stage of the design process is essentially an artistic activity unencumbered with accuracy, dimensionality, scale, program or even tectonics, albeit all of these maybe tacitly present at the ‘back of a designer’s mind’. Artistic activities involve broad mental processes that are beneath the stratum of consciousness. By definition, consciousness is selective awareness; it is linear in execution and limited in its capability to synthesize complex parameters. One of the central questions of this paper is “if artistic process requires one to abandon, or relinquish conscious purpose at the time of the generation of the work of art, and if the early stages of artistic process is a result of a vast number of ‘unconscious’ forces and impulses, then how can the computer, which demands (and thus propagates) geometric precision, focused operation and rational execution, be part of that process?” This paper will explore how, cybernetically, the computer can be ‘coupled’ with ‘self’ (via a visual interface) and the artistic process. Three specially devised conceptual design exercises•namely BurrDesign, BlinDesign, and BlitzDesign•and three corresponding “interruptive” computer interface modifications were deployed in an introduction to digital media course. The results of this study are now under consideration for their effectiveness in promoting conceptual design using the computer, and how the ‘self’ might form a cybernetic whole with the machine. The findings could have implications in design pedagogy, informatics and interface design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	8ea2
authors	Simondetti, Alvise
year	2002
title	Computer-generated physical modelling in the early stages of the design process
source	Automation in Construction 11 (3) (2002) pp. 303-311
summary	This paper illustrates some of the opportunities arising from the introduction of computer-generated physical modelling1 in the early stages of the architectural design process. The use of this technology in the design process differs from previous research and practise in that it looks at the use of computer-generated physical modelling recursively in design process rather than as a means to create a final presentation model [W.J. Mitchell, M. McCullough, Digital Design Media, Van Nostrand Reihnold, New York, 1994]. Previous research in the field by the author identified recursive strategy in the design process as the area in which computer-generated physical modelling offers unique opportunities to the designer. Three unique advantages in the use of computer-generated physical modelling technology are illustrated by three case studies. These advantages are: (1) understanding kinetic design, (2) understanding design involving complex geometry and (3) understanding design at the interface with the human body.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

For more results click below: