Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 445

Reformat results as: short short into frame detailed detailed into frame

_id	b6f7
authors	Morozumi, M., Sueshige, Y., Uchiyama, T. and Inoue, S.
year	2002
title	Linked QTVR System for SimulatingCitizens’ Strolling Around Activities
doi	https://doi.org/10.52842/conf.acadia.2002.217
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 217-227
summary	This paper discusses a city model using the linked QTVR (cylinder-VR) technique to study relationshipsbetween people’s behavior while strolling around downtown shopping districts, and visual stimuli in eachpart of the district. At the beginning of the study, because a large city model was required, a majorobstacle was the necessity of taking a large number of photographic images of the area, especiallyimages with wide vertical view angles. The objectives of this paper are to: (a) discuss the major featuresof the simulation system and its uses for the study, (b) discuss a refined method of producing acylindrical image of QTVR allowing the operator to look up almost 56 degrees, and (c) evaluate theperformance of the developed system through experiment by 30 university students who know thedistrict well.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	7f0a
authors	Chen, K.-Z.,Feng, X.-A. and Ding, L.
year	2002
title	Intelligent approaches for generating assembly drawings from 3-D computer models of mechanical products
source	Computer-Aided Design, Vol. 34 (5) (2002) pp. 347-355
summary	In order to reduce the time of mechanical product design and ensure the high quality of their assembly drawings, this paper develops an intelligent approach for generatingassembly drawings automatically from three-dimensional (3-D) computer assembly models of mechanical products by simulating the experienced human designer's thinkingmode with the aid of computer graphics and knowledge-based expert system. The key issues include the strategies and methods for selecting the necessary views in anassembly drawing, determining necessary sectional views in each view, eliminating the unreasonable projective overlap of the components in each view, and minimizing thenumbers of both the views in an assembly drawing and the sectional views in each view. Based on the approach, corresponding software prototype was developed. Finally, itis demonstrated, from an example of the fixture in a modularized drilling machine, that its assembly drawing was generated successfully using this intelligent softwareprototype.
keywords	CAD, Intelligent CAD, Expert System, Artificial Intelligence, Assembly, Drawing
series	journal paper
email
last changed	2003/05/15 21:33

_id	ddssar0229
id	ddssar0229
authors	De Vries, B., Jessurun, A.J. and J. Dijkstra, J.
year	2002
title	Conformance Checking by Capturing and Simulating Human Behaviour in the Built Environment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to model natural human behaviour, it is necessary to capture this behaviour. First, we will start out by modelling behaviour for specific situations, such as taking a seat in a theatre. To capture humanbehaviour, the following experiment is performed: Given a virtual environment, a sufficient number of subjects (real humans) are asked to execute a human task in this virtual environment (e.g. take a seat inthe theatre). Whenever the subject deviates from the shortest path, the system will ask for a clue why this is done. The hypothesis is that the combination of the motion paths and the clues for making/changing decisions will provide decision rules to make reliable predictions about human behaviour under the same conditions when using virtual persons. To test the hypothesis, we propose to use the university’s main conference and presentation hall as a test case. A 3D model and a motion pathgraph are constructed that enables a virtual person to find its way to a selected chair. The clues from the experiment are implemented as decision rules that determine a virtual person’s behaviour. Running thesimulation will result in the following data: Time per person to find a chair, Deviation from the shortest path, Distance covered per person to find a chair, Distribution of seated persons over time and Relocation of persons. To validate the test case, the process of people entering the hall and finding a chair is recorded on videotape. The walking behaviour of the people observed on the video is analysed and compared with the data from the simulation.
series	DDSS
last changed	2003/08/07 16:36

_id	c7e0
id	c7e0
authors	Maria Gabriela Caffarena Celani
year	2002
title	BEYOND ANALYSIS AND REPRESENTATION IN CAD: A NEW COMPUTATIONAL APPROACH TO DESIGN EDUCATION
source	Submitted to the Department of Architecture in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the field of Architecture: Design & Computation at the Massachusetts Institute of Technology
summary	This thesis aims at changing students' attitude towards the use of computer-aided design (CAD) in architecture. It starts from the premise that CAD is used mostly for analysis and representation, and not as a real design aide, and that architecture students have a bias against learning computer programming. For this purpose, a prototypical instruction system that mixes computer-aided design and computational design theory was developed, based on a series of fundamental concepts that are common to both fields. This system was influenced by Mitchell's (1987) The Art of Computer Graphics Programming and Stiny's (1976) shape grammars. Despite being based on solid theoretical foundations, CAD has progressively become an exclusively practical tool, since its origins in the 50's and 60's, while computational design theories have been mostly restricted to the academic circles. This thesis proposes an inversion in the present situation: the study of CAD theory, and the application of computational design into practice. The system proposed provides a conceptual framework that can be adapted to different circumstances, including course formats and resources, as well as students' background and technical training. It is based on seven fundamental concepts from computational design theories that are also important to the study of shape grammars: symmetry, recursion, rule-based compositions, parameterization of shapes, generative systems, algorithmization of design procedures, and shape emergence. These concepts are introduced within a CAD context, where their practical implementation and experimentation are possible, focusing the understanding of the computational nature of design. During this research, the proposed system was tested in two case studies with students from schools that had contrary orientations in terms of the importance of CAD in the architectural curriculum. In these experimental courses, students' activities evolved from using a commercial CAD tool in an innovative way, to the use of programming techniques for creating meaningful tools. Despite not having a statistical reach, the fieldwork allowed drawing preliminary conclusions about the proposed system's efficacy, since virtually all the students reported changing their understanding of the role of CAD in architecture, while some also acknowledged a conceptual influence in other subjects and in the way they see architecture.
keywords	Symmetry
series	thesis:PhD
type	normal paper
email
more	http://www.fec.unicamp.br/~celani/
last changed	2004/11/17 20:51

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	6a37
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
doi	https://doi.org/10.52842/conf.acadia.2002.013
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 13-23
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies ina tightly structured framework for the integration of Environmental Control Systems (ECS) principles intoa third year design studio. An interchangeable use of digital media and physical material enabledarchitectural explorations of rich tactile and luminous engagement.The principles that provide the foundation for integrative strategies between a design studio and buildingtechnology course spring from the Bauhaus tradition where a systematic approach to craftsmanship andvisual perception is emphasized. Focusing particularly on color, light, texture and materials, Josef Albersexplored the assemblage of found objects, transforming these materials into unexpected dynamiccompositions. Moholy-Nagy developed a technique called the photogram or camera-less photograph torecord the temporal movements of light. Wassily Kandinsky developed a method of analytical drawingthat breaks a still life composition into diagrammatic forces to express tension and geometry. Theseschematic diagrams provide a method for students to examine and analyze the implications of elementplacements in space (Bermudez, Neiman 1997). Gyorgy Kepes's Language of Vision provides a primerfor learning basic design principles. Kepes argued that the perception of a visual image needs aprocess of organization. According to Kepes, the experience of an image is "a creative act ofintegration". All of these principles provide the framework for the studio investigation.The quarter started with a series of intense short workshops that used an interchangeable use of digitaland physical media to focus on ECS topics such as day lighting, electric lighting, and skin vocabulary tolead students to consider these components as part of their form-making inspiration.In integrating ECS components with the design studio, an nine-step methodology was established toprovide students with a compelling and tangible framework for design:Examples of student work will be presented for the two times this course was offered (2001/02) to showhow exercises were linked to allow for a clear design progression.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddssar0218
id	ddssar0218
authors	Koutamanis, Alexander
year	2002
title	Information Amount Measurement in Generative Systems:An Objective Approach to Termination
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Termination in computational generative systems is linked increasingly to user intervention: the generative system concludes when the user chooses it to do so. The similarities between this approach to termination and the creative artistic process suggest that the products of generative systems are amenable to analysis in terms of well-formedness leading to a formal measure that acts as an automatic termination trigger. The paper proposes that such a measure can be derived from structural information theory. By applying the compression of structural information theory to meaningful principles of a design world we derive a consistent, universal description of the design result at any given state. This description expresses the correlation of the design with its formal constraints, as well as the general perception of the design’s patterns.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	ga0206
id	ga0206
authors	Biles, John A.
year	2002
title	GenJam in Transition: from Genetic Jammer to Generative Jammer
source	International Conference on Generative Art
summary	GenJam, short for Genetic Jammer, is an evolutionary computation (EC) based software agent that models a jazz improviser. Recently GenJam has evolved away from its roots as an interactive genetic algorithm toward its current state as an autonomous generative system. GenJam has retained its chromosome-based representations and mappings, its intelligent selection, crossover and mutation operators, and its real-time interactive performance capabilities. However, it no longer needs any explicit representation of fitness, which arguably makes it no longer an EC system. This paper considers GenJam as a generative art system. Generative art produces “unique and non-repeatable events” that express a designer’s generating idea. The designer’s generating idea defines a species of events, represented in a genetic code. In music, these events could be individual notes, melodic phrases, even entire pieces. In GenJam the events are four-measure phrases, or “licks” in the jazz vernacular. The format for the genetic code, then, defines a species space from which unique individual events can be generated. Uniqueness is important in jazz because improvisation must be spontaneous and “new.” Hence, improvisation is tailor-made for the generative art paradigm, and in fact, one could argue that improvisation is, by definition, the purest example of generative art applied to music. In other words, generative music is improvisation, and GenJam is the Generative Jammer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:16

_id	077a
authors	Boucard, D., Huot, S., Colin, Ch., Hégron, G. and Siret, D.
year	2002
title	An Image-based and Knowledge-based System for Efficient Architectural and Urban Modeling
doi	https://doi.org/10.52842/conf.acadia.2002.229
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 229-238
summary	In this paper, we present two user-centered systems aiming at making easier the modeling ofarchitectural and urban scenes by using two different but complementary approaches. The first oneMArINa, an image-based modeler, allows the user to reconstruct urban scenes from one or moregraphical documents. This method focuses more on reconstructing models and is more dedicated tothe production of 3D sketches. The second modeler, MArCo is a knowledge-based modelercontaining the know-from and know-how on classical architecture. It allows the user to modelclassical architectural scenes verifying automatically all the domain rules. Finally, we show howMArINa and MArCo can cooperate providing the user a tool combining efficiently their respectivecapabilities.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	b13d
authors	Broek, J.J., Horváth, I., Smit, B. de, Lennings, A.F., Rusák, Z. and Vergeest, J.S.M.
year	2002
title	Free-form thick layer object manufacturing technology for large-sized physical models
source	Automation in Construction 11 (3) (2002) pp. 335-347
summary	Large-sized free-form objects of different materials are widely used in various industrial applications. Currently, layered rapid prototyping technologies are not suitable for the fabrication of this kind of objects, due to the necessity of a large number of layers and the limitations in size. This paper reports a novel approach of layered manufacturing that is more appropriate for the fabrication of these large objects. A method of thick-layered object manufacturing is presented, which is based on a higher order approximation of the shape and application of a flexible curved cutting tool.The method allows the production of physical prototypes, which need little or no finishing. In order to meet the designer's intend, as closely as possible, some feasible system characteristics are introduced. The process is ordered in a sequential way and provides a highly automated process. A hierarchical decomposition of the CAD geometry takes place into components, segments, layers and sectors, based on morphological analysis. This method enables the manufacturing and the re-assembly of the parts to produce the physical prototypes without affecting the requested functionality. Due to the possibility of obtaining multiple solutions in the physical model, much attention must be paid to the efficiency of the process.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	2cd9
authors	Ceccato, C. Fischer, Th., Li Chun-Man, G. and Frazer, J.
year	2002
title	A Large-Scale Computing Infrastructure for Design Education
doi	https://doi.org/10.52842/conf.ecaade.2002.282
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 282-289
summary	Most departmental computing infrastructure reflects the state of networking technology and available funds at the time of construction, which converge in a preconceived notion of homogeneity of network architecture and usage patterns. The DMAN (Digital Media Access Network) project, a large-scale server and network foundation for The Hong Kong Polytechnic University’s School of Design, was created as a platform that would support a highly complex academic environment while giving maximum freedom to students, faculty and researchers through simplicity and ease of use. As a centralized multi-user computation backbone, DMAN faces an extremely heterogeneous user and application profile, exceeding implementation and maintenance challenges of typical enterprise, and even most academic server set-ups. This paper summarizes the specification, implementation and application of the system while describing its significance for design education in a computational context.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	3850
authors	Chitchian, D. and Bekkering, H.
year	2002
title	Urban-CAD, A Tool for Urbanistic Design
doi	https://doi.org/10.52842/conf.ecaade.2002.404
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 404-407
summary	The existing CAD, CAAD programs and design applications hardly support the urbanistic design activities. The conceptual difference between architecture and urbanism necessitates developing new CAD software based on the urbanistic design process. Our developed Urban-CAD system assists designers with urbanistic design activities.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	1804
authors	Chitchian, D. and Bekkering, H.
year	2002
title	An Urbanistic Design Tool
doi	https://doi.org/10.52842/conf.acadia.2002.339
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 339-344
summary	The existing CAD and CAAD programs and design applications hardly support the urbanistic designactivities. Although those applications are useful means to be utilized generally in design tasks, they arenot suitable tools as urbanism community needs. Most existing CAD programs are based on thearchitectural design process and therefore not suitable for urbanistic design. The conceptual differencebetween architecture and urbanism necessitates developing new CAD software based on the urbanisticdesign process. We believe that our developed Urban-CAD system assists designers with urbanisticdesign activities and overcomes the limitations of the already existing CAD applications.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	09a8
authors	Chiu, M.L., Lin, C.J., Jeng, T.S. and Lee, C.H.
year	2002
title	Re-Searching The Research Problems with CAAD: Datamining in i-CAADRIA
doi	https://doi.org/10.52842/conf.caadria.2002.031
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 031-38
summary	This study attempts to develop an online CAAD research archive of conference papers, i-CAADRIA, and apply data mining techniques to find research patterns. Research papers are clustered for building semantic relationship. The system and early feedbacks are presented. This study suggests that smart web query and user interface can enhance our understanding of the research patterns.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ddssar0207
id	ddssar0207
authors	Conti, G. and Ucelli, G.
year	2002
title	A Java3D Tool for Real-Time Collaboration in a Virtual Reality CAADEnvironment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today the development of network-based virtual communities and the use of avatars have brought a new level of complexity to the meaning of virtuality, providing the technology for remote presence and collaborative experiences. In this project the intention was to pursue this articulated vision of VR in order to assist the design profession during the early stages of the design process. The objective was to provide a tool that is capable of creating 3D shapes in a shared VR environment, thus allowing thedesign and its evolution to be shared. The use of the Java programming language was a natural choice for this project. Because of Java’s performance scalability and hardware independence the concept ofCAAD has been extended, making it possible to create a VR environment that can co-exist between high-end supercomputers and standard PCs. The project is currently being tested using PCs and an SGI system running a Reality Centre. The research reported in this paper describes the architecture and application of software that aims to increase the opportunity for collaboration within virtual worlds and enable effective and transparent information exchange.
series	DDSS
last changed	2003/08/07 16:36

_id	aef5
authors	De Paoli, Giovanni and Léglise, Michel
year	2002
title	Architectural Design Education and Digital Technologies: Toward a Multinational Research Observatory
doi	https://doi.org/10.52842/conf.ecaade.2002.056
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 56-63
summary	New visions that do not confine the computer to strictly technical and representation functions have appeared in schools of architecture over the past few years. The use of new information and communication technologies (NICT), in the field of design education in particular, have allowed the creation of innovative teaching tools and teaching configurations that are operational in certain European and North American schools. Unfortunately, the comparison of experiences is rare, and it would be beneficial to facilitate educational exchanges on a scientific basis. It is clear, now, that the general use of NICT will have to promote educational programs that are evaluated scientifically, that are “efficient” and that are occasionally multinational, even if the cultural differences make the task difficult. These considerations have lead us to the proposal of recommendations for the creation of a multinational observatory for the teaching of design that could benefit from the presence of researchers from European countries and from North America already implicated in activities in our laboratories. This observatory is conceived as a depository of pedagogical works serving as observation material destined for scientific research. As such, it would act as an observation site for research in didactics of design. It would allow for a new understanding of the opportunities and limitations derived from the emerging globalisation of distributed design education and offer new challenges for architectural schools. This article describes the beginnings of this observation system and underscores its potential to produce results in the future.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: