Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup0213
id	ddssup0213
authors	Osaragi, Toshihiro
year	2002
title	Classification Methods for Spatial Data Representation
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In the process of representing quantitative spatial data on a map, it is necessary to classify attribute values into some class divisions. When a number of classes are employed, the characteristics of spatial distribution of original data can be expressed faithfully. However, its legends might become rather complicated and the delicate color differences in the represented map would be difficult to distinguish. On the other hand, when employing a few classes, the information such as small vibrating factors or local peaks might be ignored; namely, much information of original data will be lost. Hence, we should discuss how many classes are necessary to represent spatial data. Furthermore, even if the same spatial data are represented using the same number of classes, we might obtain the quite different maps according to the choice of classification methods incorporated in existing geographic information systems. Namely, the characteristics of the original data might be overlooked, or there might be a risk of mistaking judgment, if we do not have enough knowledge about classification methods as well as the nature of original data. Hence, we should also discuss how the boundary value between each class should be set. In this paper, a new classification method using an evaluation function based on Akaike’s Information Criterion is proposed, and is applied to actual spatial data. Next, based on the consideration about its result, another classification method minimizing information loss of original data is proposed. Furthermore, numerical examples of its applications are achieved through the comparison with existing classification methods.
series	DDSS
last changed	2003/08/07 16:36

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
doi	https://doi.org/10.52842/conf.acadia.2002.097
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	3a3d
authors	Coors, Volker
year	2002
title	Resource-Adaptive 3D Maps for Location Based Services
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.29-I.38
summary	In this paper, we present a database driven approach for managing and visualizing 3D urban city models and related multimedia content. Such a 3D database is a core component of a 3D Cadastre system (Coors 2002a). In the TellMaris project (IST 2000- 28249, www.tellmaris.com), we will make use of the 3D database to generate 3D maps. The objective of TellMaris is the development of a generic 3D-map interface to tourist information on mobile computers. The interface provides a new concept for creating value added information services on mobile computers for the European citizens related to geographical information. The interface is in the project used for accessing tourist information relevant for boat tourism in the Baltic Sea and Aegean Sea area in the Mediterranean. In this paper we focus on the online generation and compression of 3D-maps in order to make use of these maps in a mobile enviroment.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:42

_id	65cb
authors	He, J. and Tsou, J.-Y.
year	2002
title	GIS-Based Visual Perception Assessment of Mountain Skyline: A case study of Jinzishan Hill and the building layout of an adjacent site planning project
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 241-248
doi	https://doi.org/10.52842/conf.caadria.2002.241
summary	In this paper, we present a GIS based approach to evaluate the visual perception quality of mountain skyline. Through computer generated analytical maps and perspectives, this tool can assist planners to define the visual reservation scopes for mountain skyline within urban area. It also offers concrete data supporting for appropriate strategy in building layout or site planning to preserve valuable natural skyline scenery.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ddssup0208
id	ddssup0208
authors	Kawakami, Mitsuhiko and Zhenjiang, Shen
year	2002
title	Formulation of an Urban and Regional Planning System Basedon a Geographical Information System and its Application- A Case Study of the Ishikawa Prefecture Area of Japan -
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	An Urban and Regional Planning System based on a geographical information system was developed using four sub-systems consisting of a digital map system, a database system, an analysis and forecast system and a planning system. In this case ARCVIEW GIS software was used as a development tool. The digital map system is formulated by the planar orthogonal coordinate system. The data is converted from digital maps issued by the Geographical Survey Institute of Japan (GSI). The database system has layers of data sets, which consist of statistical data, attribute data of geographical points and characteristics of natural features and the built environment. Several sets of principal census data havebeen converted to mesh data. These kinds of data sets are also utilized to this system. LANDSAT TM data is converted into vector data and linked to the same coordinate system. The analysis and forecast system consists of statistical or mathematical analysis, forecasts and visual presentations of the results. The planning system consists of some planning models and reviewing techniques to evaluate alternatives. As an example, this paper examines the relationship between land use and the temperatureon the ground level in built-up areas.
series	DDSS
last changed	2003/08/07 16:36

_id	b0f9
authors	Peng, C., Chang, D., Blundell-Jones, P. and Lawson, B.
year	2002
title	On an alternative framework for building virtual cities: supporting urban contextual modeling on demand
source	Environment and Planning B: Planning and Design, Vol. 29, pp 87-103, Jan 2002
summary	For various purposes, virtual city applications have been developed around the globe to provide users with online resources and services over the Internet. Following our research on the Sheffield Urban Contextual Databank (SUCoD) project, this paper presents an alternative framework for building virtual cities, which goes beyond conventional static urban modelling. A three-tier system framework is described in conjunction with the design and implementation of the SUCoD prototype. We demonstrate SUCoD's novel functionalities by showing that complex urban contextual information sets, including three-dimensional interactive models, multilayer interactive maps, and hypermedia documents, can be retrieved dynamically by user-specified urban contextual attributes, spatial loca- tions, and boundaries. The three-tier framework also facilitates system development in an extensible way, allowing continuous parallel extensions of system functionalities, user-interface components, and contextual data resources. SUCoD's dynamic capabilities are considered crucial in its future uses for urban contextual modelling on demand in relation to the past, present, and future of the City of Sheffield.
series	journal paper
last changed	2003/04/23 15:50

_id	c56b
authors	Simeone, Adriana
year	2002
title	Teatro Municipal do Rio de Janeiro: uma leitura representativa da cidade ["Teatro Municial" in Rio de Janeiro: a representative reading of the city]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 67-70
summary	The article is written on a work on Municipal Theater of Rio de Janeiro, it discuss mainly the concept of urban icon. We attempted to infer the aspects that made it as relevant as it is for the urban contest by the analysis of this meaningful architectonic element of this city. Furthermore, we also tried to elaborate, using graphic resources, a representative reading of the city based on it. The research resulted in a sequence of twenty two printed cards, which displays photographs, maps , charges drawings, newspaper articles and chronicles published in the period. Based on this work, a version for digital media is being developed as a site.
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	f321
authors	Ataman, Osman and Bermudez, Julio
year	2002
title	ACADIA'99: media effect on architectural design
source	Automation in Construction 11 (2) (2002) pp. 131-134
summary	The idea of this conference arose from various discussions between us in various different places.We decided to put a proposal together for bothpositions—Technical Chairs and Site Organizers. This was unprecedented and we were anxious. We really wanted to run this conference and run it in Salt Lake City. Our theme AMedia and Design ProcessB was a timely topic and both of us were working on and around it. We thought it was interesting and challenging to define the terms and to establish the relationships between architecture, representation andmedia. In fact, all throughout the history of architecture, representation, media and design have beenrecognized to have a close relationship. Interpretations as to what exactly this relationship is or meanshave been subject to debate, disagreement and changealong the ages. Whereas much has been said about the dialectics between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues, that we have enough context to be able to see and address the relationship between media and human activities with some degreeof perspective.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	138eaea2001
id	138eaea2001
authors	Breen, Jack
year	2002
title	A Room with a Different View
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	This contribution documents the developments, results and findings of an experimental design visualisation and presentation exercise entitled ‘A Different View of Delft’. The primary aim of this project was to make students aware of the potentials of the active utilisation of physical models for the sake of designerly enquiry. Furthermore the ambition was to explore new ways of using such model ‘environments’ for the benefit of design communication and presentation. For this exercise a ‘game’ situation with clear constraints and rules was developed beforehand. The students were to work out a proposal for a new exhibition space, as an annex to a – hypothetical – existing museum. The new space was to create a fitting ‘setting’ for a single work of art: Johannes Vermeer’s famous View of Delft. The maximum contours of the new exhibition space were given, along with clear guidelines concerning which walls and roof segments might be (partly) opened. The emphasis lay on the viewer’s ‘approach’ to the painting, its positioning and ‘framing’ in an architectural context. A designerly search involving form and space, the choice of colours and materials and particularly the strategic use of (natural) lighting.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssup0204
id	ddssup0204
authors	Caratù, G., Concilio, G. and Monno, V.
year	2002
title	Structuring Lay Knowledge in a GI Perspective: Problems and Pitfall
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	The present contribution, starting from some considerations developed in environmental planning domain, discusses the representation of lay knowledge in a GIS environment. Two paths of exploration in dealing with representational problems are sketched. The first is concerned with the structuring of an acquired cognitive base and, the other is about the implementation of cognitive routines. In particular the structuring process of a lay cognitive base is discussed starting from recent developments in GIS technologies and information theories. Difficulties and pitfalls, which arouse during a case study related to an environmental planning experience being carried on for a national natural park, are presented. The experimentation work is discussed also in relation with a preliminary attempt of outputs validation carried out with people who, in a preliminary stage, were interviewed in order to acquire lay knowledge.
series	DDSS
last changed	2003/08/07 16:36

_id	154d
authors	Colajanni, B., Pellitteri, G. and Concialdi, S.
year	2002
title	Intelligent Structures for Collaborating with the Architect
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 360-364
doi	https://doi.org/10.52842/conf.ecaade.2002.360
summary	The number of different designers with different competencies collaborating in a building project is today conspicuous. An undesired consequence is the possible rise of conflicts between decisions taken independently by more than one specialist on the same building object. The early detection of such conflicts is then one of the most important features in collaborative design. Moreover, of great interest would be the possibility not only of automatic detection but also of solution proposal of at least the most manageable of those conflicts. In this perspective smart models of building components could be very useful. This is possible giving the building elements, represented as objects, the specific intelligence. A simple example of this possibility is given in this paper. In a precedent work we proposed a way of managing elementary spatial conflicts between building components tending to occupy the same spaces. The automatic detection derived from the previous declaration of two levels of constraints (soft constraint and hard constraints) in such way that a violation of them could be immediately signaled to the actor wanting to take the decision triggering the conflict. In this paper the topic is the consequences of the rise of a spatial conflict (occupation of the same space) between a column of a spatial frame of columns and beams, and another building object of any sort subject to a soft or hard constraint. The procedure identifies the minimum displacement of the two objects, propagates the column displacement to the other structural elements connected to it and checks the feasibility of the new configuration of the structural schema both with regard to the possible rise of new conflicts and with the compliance to previous structural criteria.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	e5e7
authors	Fischer, Th., Fischer, T. and Ceccato, C.
year	2002
title	Distributed Agents for Morphologic and Behavioral Expression in Cellular Design Systems
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 111-121
doi	https://doi.org/10.52842/conf.acadia.2002.111
summary	After more than a century of domination by neo-Darwinian theory, biological thought is beginning to giveincreasing recognition to developmental theory. Amongst other reasons, this recent widening ofperspective is grounded on the incompleteness of the neo-Darwinian perspective in providing modelsfor the invention of novel forms or species and individual development. Evolutionary design theory hasdrawn much of its inspiration from evolutionary biology and consequently shows analogous flaws. Thispaper demonstrates an adoption of biological developmental theory to the field of design theory in orderto fill the corresponding gap. As natural developmental processes are based on the development ofcellular units, which form composite structures, this paper employs the cellular model as a means for thedevelopment of a corresponding design and construction theory. The discussion of this approachincludes possible linkages between morphologic and behavioral attributes of tissues with implicationsfor self-assembly, growth, healing and self-reproduction of man-made structures.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ga0204
id	ga0204
authors	García-Salgado, Tomás
year	2002
title	Modular Perspective as a Method for Generative Design
source	International Conference on Generative Art
summary	Apparently there are many methods for perspective but if we categorize them there are just a few. Some criterions of classification relate perspective to the so-called 1-point, 2-point and 3-point methods, others —more formally— to projective geometry, descriptive geometry or vectorial algebra. Of course we cannot forget to mention the early treatises on perspective such as Alberti’s Della Pittura or Piero’s De Prospectiva Pingendi, which escapes any classification. Our aim on this article is not precisely to solve the classification problem rather we propose a new comprehensive method for perspective, capable of 3D representation without using vanishing points.The modular perspective method allows us to work in true three-dimensionality on the perspective plane (PPl). We will explain how to measure directly on the PPl the triad coordinates (x, y, p) of a given point into the visual space, and how to play with the symmetrical planes X and Y (SPl X/Y) in order to generate or recover data. Finally we will explain how to employ modular perspective in generative design formal-process through an example of application.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ga0213
id	ga0213
authors	Herr, Christiane M.
year	2002
title	Generative Architectural Design and Complexity Theory
source	International Conference on Generative Art
summary	During the past decades, complexity theory has evolved as a new discipline that provides a broad scientific perspective towards dynamic real-life phenomena, challenging the classical linear worldview as well as simple cause-and-effect-style Newtonian physics. For architects, the advent of this new science offers the challenge as well as the chance to reconsider common design approaches and to invent new strategies based on the new paradigms. The actual application of complexity theory to architectural design, however, results in a fundamental dilemma: How can a reflective, ultimately retrospective body of thought (complexity theory) be applied to prospective design challenges (architecture)? Being part of a current MArch thesis project, the proposed paper focuses on this general dilemma between architectural design and complexity theory and discusses actual as well as potential future generative architectural design approaches involving complexity theory. Generative design strategies commonly apply algorithmic methods and formalisms, which can conveniently produce and deal with high levels of complexity. Complexity describes general properties of a system and can be further dissected into several modes: epistemic, ontological and functional complexity. This taxonomy offers insights into generative design applications, which have mostly focused on a limited set of complexity modes. Besides complexity generated by sheer numbers, aspects like functional or hierarchical complexity offer further perspectives on generative systems, processes and output. Considering these aspects of complexity theory, future challenges to generative architectural design can be predicted.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	c8df
authors	Issa, Rajaa and Moloney, Jules
year	2002
title	The Potential of Computer Modeling Software to Support a Consideration of Building Materials in Architectural Design Education
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 440-447
doi	https://doi.org/10.52842/conf.ecaade.2002.440
summary	Most CAAD software in use for architectural education relies heavily on abstract geometry manipulation to create architectural form. Building materials are usually applied as finishing textures to complement the visual effect of the geometry. This paper attempts to investigate the limitations of commonly used CAAD software in terms of encouraging an intuitive thinking about the physical characteristics of building materials in the design studio environment. A case study involving 90 students is presented. The possibility of developing software that uses geometrical abstractions of different materials as the basis for modeling architectural form in the design studio is introduced.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: