Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
doi	https://doi.org/10.52842/conf.acadia.2017.202
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	12d9
authors	Anumba, C.J., Ugwu, O.O., Newnham, L. and Thorpe, A.
year	2002
title	Collaborative design of structures using intelligent agents
source	Automation in Construction 11 (1) (2002) pp. 89-103
summary	The construction industry has a long tradition of collaborative working between the members of a construction project team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design disciplines. To aid these meetings, the information and communications technologies that are currently available have been utilised. These have yielded some success but are hampered by the problems posed by the use of heterogeneous software tools and the lack of effective collaboration tools that are necessary to collapse the time and distance constraints, within which increasingly global design teams work. In particular, there are very few tools available to support distributed asynchronous collaboration. Distributed artificial intelligence, which is commonly implemented in the form of intelligent agents, offers considerable potential for the development of such tools. This paper examines some of the issues associated with the use of distributed artificial intelligence systems within the construction industry. It describes the potential for the use of agent technology in collaborative design and then goes on to present the key features of an agent-based system for the collaborative design of portal frame structures. An example is presented to demonstrate the working and benefits of the prototype system, which makes a significant contribution by allowing for peer to peer negotiation between the design agents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6440
authors	Chang, Y.L., Lee, Y.Z. and Liu, Y.T.
year	2002
title	Construction of Digital City in Physical City: Cyberspatial Cognition Approach to the Project of Hsin-Chu Digital City in Taiwan
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 109-116
doi	https://doi.org/10.52842/conf.caadria.2002.109
summary	The cyberspace upon physical space forms a new spatial structure to increase the influence on the urban fabric and the concept of space in architecture. Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. How do digital cities directly connect to physical cities and become an imaginable city? Therefore, we argue that a new spatial analysis theory must be established for digital city, comparing with theories of disciplines, to find the explicitly spatial structures and relations in digital city upon physical city.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	154d
authors	Colajanni, B., Pellitteri, G. and Concialdi, S.
year	2002
title	Intelligent Structures for Collaborating with the Architect
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 360-364
doi	https://doi.org/10.52842/conf.ecaade.2002.360
summary	The number of different designers with different competencies collaborating in a building project is today conspicuous. An undesired consequence is the possible rise of conflicts between decisions taken independently by more than one specialist on the same building object. The early detection of such conflicts is then one of the most important features in collaborative design. Moreover, of great interest would be the possibility not only of automatic detection but also of solution proposal of at least the most manageable of those conflicts. In this perspective smart models of building components could be very useful. This is possible giving the building elements, represented as objects, the specific intelligence. A simple example of this possibility is given in this paper. In a precedent work we proposed a way of managing elementary spatial conflicts between building components tending to occupy the same spaces. The automatic detection derived from the previous declaration of two levels of constraints (soft constraint and hard constraints) in such way that a violation of them could be immediately signaled to the actor wanting to take the decision triggering the conflict. In this paper the topic is the consequences of the rise of a spatial conflict (occupation of the same space) between a column of a spatial frame of columns and beams, and another building object of any sort subject to a soft or hard constraint. The procedure identifies the minimum displacement of the two objects, propagates the column displacement to the other structural elements connected to it and checks the feasibility of the new configuration of the structural schema both with regard to the possible rise of new conflicts and with the compliance to previous structural criteria.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	b7de
authors	Flemming, Ulrich, Erhan, Halil and Ozkaya, Ipek
year	2002
title	Object-Oriented Application Development in CAD: A Graduate Course
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 25-36
doi	https://doi.org/10.52842/conf.acadia.2002.025
summary	The programming languages typically offered by CAD systems for third-party application developerswere procedural or functional. A major shift is currently occurring in that new versions of commercialCAD software will support object-oriented programming languages for application development.Developers who wish to take advantage of this new kind of environment must undergo a considerablecognitive “retooling” and adopt new software engineering strategies. We describe a graduate coursethat aims at introducing students to effective object-oriented development strategies, especially usecase-driven development and the tools provided by the Unified Modeling Language (UML). Studentsgained experience with these tools by forming, together with the instructors, a single development teamwriting an application on top of MicroStation/J using JMDL as programming language. The paperdescribes the instructors’ experience with this approach.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ecaade2009_193
id	ecaade2009_193
authors	Frumar, Jerome; Zhou, Yiyi
year	2009
title	Beyond Representation: Real Time Form Finding of Tensegrity Structures with 3d ‘Compressed’ Components
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2009.021
wos	WOS:000334282200001
summary	Tensegrity structures are of interest to architecture and engineering as a practical means to explore lightweight and rapidly deployable modular structures that have a high degree of geometric freedom and formal potency. The notion of tensegrity structures with 3D ‘compressed’ components is introduced and their feasibility is demonstrated through selected physical models. Attempts to further explore the architectural potential of tensegrity structures within a computational environment have proven difficult, as they are statically indeterminate and require form finding procedures to “find a geometry compatible with a self-stress state” (Motro 2002). An overview of tensegrity ‘capable’ software that can be used for architectural design is followed by a discussion that introduces an additional computational method based on particle-spring systems. This approach enables real time manipulation of tensegrity networks. Two projects that utilize this unique tool are described.
keywords	Form finding, particle-spring, tensegrity, 3D compressed component
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2014_057
id	ecaade2014_057
authors	Ivo Vrouwe and Burak Pak
year	2014
title	Framing Parametric and Generative Structures - A Novel Framework for Analysis and Education
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 365-371
doi	https://doi.org/10.52842/conf.ecaade.2014.1.365
wos	WOS:000361384700036
summary	In this paper we aimed at the development of a novel tool to facilitate the structured analysis of architectural construction principles, materials and production methods in digital design and fabrication practices. In order to assist the understanding and teaching of these subjects, we employed a taxonomy of spatial design construction (Vrouwe 2013). By using the taxonomy, we analysed and categorised 34 parametric structures published in the IJAC Journal (2002-2014). Informed by this study, we aligned the initial taxonomy using various framing strategies. As a result we developed a new framework for spatial design construction specifically customised for the design and fabrication of parametric structures which can potentially serve as a constructive tool to create a novel design learning environment and integrated teaching strategies.
keywords	Digital fabrication; parametric design; education; framing; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ga0229
id	ga0229
authors	Liou, S.-R.
year	2002
title	Design from Known to New -Issues of Generative Architecture under Digital Environment
source	International Conference on Generative Art
summary	Given the power of digital design media, architects are confronting a new territory of architectural morphology. This paper attempts to explore the issues of generative architecture under digital environment. It is concerned with architectural precedents, their morphological attributes, and morphological analysis as the point of departure for generating new designs. Three design experiments are employed for the exploration. The first experiment addresses the issue of a single building. The second experiment focuses on the problem of urban architecture. The third design experiment places emphasis on the issue of urban landform. In addition to the exciting novel forms and spaces generated from the afore-mentioned design experiments, a number of critical issues on generative architecture are raised and discussed in the paper. Among them are: (1) the concept and logic underlying the methodology of the design experiments; (2) the formulation of the generative design systems utilizing the existing morphological structures; (3) the employment of the digital design media (e.g. image processing, 3D abstraction and extrusion) for various purposes during the process of analysis and generation.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	bff9
authors	Proctor, George (Ed.)
year	2002
title	ACADIA 2002 [Conference Proceedings]
source	Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X / Pomona (California) 24-27 October 2002, 446 p.
doi	https://doi.org/10.52842/conf.acadia.2002
summary	The 2002 ACADIA conference finds digital tec_nology ubiquitous as the Association for Computer Aided Design in Architecture moves into its third decade. The organization of ACADIA is on the threshold of restating its mission. After 20 years, many of the organization’s initial objectives have been achieved. ACADIA members have been instrumental in the development of design software, and in bringing computers and digital technology into architectural practice and design school curriculum. At first, ACADIAns faced the debate over the appropriateness and utility of digital technology in the disciplines of architecture, planning and building science. Today the use of computers and information technology is widely accepted by architects and CAAD and digital technology have brought profound change to design practice. The debate in ACADIA has long since moved from "should we use this technology" to "how", "for what" and "why". Now that many practitioners, learning institutions and professional organizations have taken up the call, ACADIA must restate its mission, if it wishes to remain “distinct”. This does not mean that the work of ACADIA is complete. Much remains to be done and much more needs to be improved. ACADIA’s Mission Statement places particular focus on “education and the software, hardware and pedagogy involved in education.” And “(t)he organization is also committed to the research and development of computer aides that enhance design creativity, and that aim at contributing to the construction of humane physical environments.” These are the areas that continue to evolve, grow and provide for ACADIA’s continued relevance. The ACADIA 2002 conference theme reflects the state of digital technology’s application to the discipline, as much as it refers to ACADIA’s future. With the general acceptance of digital technology and CAAD, we have arrived at a place where the work of great interest and relevance lies in the space between what is digital and what is analog. The environments of real space and cyberspace have in a very short time become so intertwined that the space between real and virtual (not to be confused with reality and fantasy) is becoming indistinguishable. You cannot eat, travel, use public utilities, bank, shop, vacation or recreate without at the very least coming into contact with or passing through information space. The landscape between these two environments has become a cultural phenomenon for those societies with access to the Internet and information networks. And while the computer and World Wide Web have empowered individuals, the collective impact of the technology holds all the potential and problems that similarly emerged in other technology induced landscapes. Consider this last point in the context of ACADIA’s stated mission to “enhance design creativity while contributing to the construction of humane physical environments.” And you can see why many of the 260 initial submissions to this conference were in the area of design artifacts and design methodology, providing evidence that ACADIA’s mission remains relevant and in accord with the trends of research and professional creative activity.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	946b
authors	Zhou, Q., Krawczyk, R.J. and Schipporeit, G.
year	2002
title	From CAD to IAD: A Working Model of the Internet-based Engineering Consulting in Architecture
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 073-80
doi	https://doi.org/10.52842/conf.caadria.2002.073
summary	Information technology has become so powerful that what is conventionally called CAD might evolve into iAD (Internet Aided Design) in the near future (Zhou 2000). For Internet applications in the AEC industry, most of the efforts and success have been concentrated on project management and collaboration, while in the design and engineering consulting area, limited progress has been made. During the period of Internet development, the nature of the fragmentation of the AEC industry has not been changed. Based on previous research of surveys of development of Internet applications in the AEC industry (Zhou 2001), and the study of information technology both available today and in the near future, we propose a general abstracted model of an Internet-based consulting system by integrating a variety of disciplines and functions of design and construction processes. This model will cover a range of design phases, such as, information gathering, automatic remote consultation, specific problem solving, and collaboration. Finally, in future follow up research, we will apply the proposed model to steel construction in architectural design, and develop a prototype simulation by selecting one type of structural system.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	8780
authors	Abdelhameed, W., Ozel, F., Addelatiff, M. and Daef, A.
year	2002
title	Assessment of the Impact of Digital-Manual Media Types on the Basic Design Capabilities of Architects: A Proposed Framework and Directive Measures
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 275-276
summary	The research attempts to defi ne and classify the design capabilities of architects into a basic framework. This defi nition will be useful in understanding and determining the types and nature of impact introduced by digital and manual media used during architecturaldesign process. The research consists of three parts. The First part reviews the main stages, tasks and activities of the architectural design process. The second part builds the proposed framework of design capabilities relating them to the specifi c tasks and activities conductedby the architect along the design process. The third part proposes some useful measures as to how to make use of the proposed framework in assessing the impact of media on the design capabilities of architects.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	765f
authors	Adam, Holger
year	2002
title	Reinterpretation or replacement? The effects of the information and communication technologies on urban space
source	CORP 2002, Vienna, pp. 345-349
summary	The timid question “Virtual spaces or real places?” forms the core of many debates within the spatial sciences addressing theconsequences of the rapid development of information and communication technologies1 on existing spatial structures. So far several opinions rival each other for the interpretation of current and the prediction of future spatial developments. The spacelessness ofcomputer networks and the possibility to transmit data in real-time have lead visionaries to predict a far-reaching devaluation of timeand space, so questioning the future importance of traditional spatial structures: The “annihilation of distance and time constraints [incomputer networks] could undermine the very rationale for the existence of the city by dissolving the need for physical proximity”(Graham and Marvin 1996: 318). The disappearance of the city into the net, therefore, seems to become a distinct possibility.
series	other
email
more	www.corp.at
last changed	2003/11/21 15:15

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
doi	https://doi.org/10.52842/conf.caadria.2002.151
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	f321
authors	Ataman, Osman and Bermudez, Julio
year	2002
title	ACADIA'99: media effect on architectural design
source	Automation in Construction 11 (2) (2002) pp. 131-134
summary	The idea of this conference arose from various discussions between us in various different places.We decided to put a proposal together for bothpositions—Technical Chairs and Site Organizers. This was unprecedented and we were anxious. We really wanted to run this conference and run it in Salt Lake City. Our theme AMedia and Design ProcessB was a timely topic and both of us were working on and around it. We thought it was interesting and challenging to define the terms and to establish the relationships between architecture, representation andmedia. In fact, all throughout the history of architecture, representation, media and design have beenrecognized to have a close relationship. Interpretations as to what exactly this relationship is or meanshave been subject to debate, disagreement and changealong the ages. Whereas much has been said about the dialectics between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues, that we have enough context to be able to see and address the relationship between media and human activities with some degreeof perspective.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
doi	https://doi.org/10.52842/conf.acadia.2002.097
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: