Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 409

Reformat results as: short short into frame detailed detailed into frame

_id	4e8c
authors	Chien, Sheng-Fen and Flemming, Ulrich
year	2001
title	Design space navigation in generative design systems
source	Automation in Construction 11 (1) (2002) pp. 1-22
summary	Generative design systems make it easier for designers to generate and explore design alternatives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed if designers wish to access the information they generate with ease. We present a comprehensive approach to support information navigation in requirement-driven generative design systems, which gain their power form explicit representations of design requirements, which in turn add to the information generated by the system. Our approach takes into account studies dealing with human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. We structure the information to be accessed in terms of a five-dimensional design space model that applies across generative design systems of the type considered here. The model structure supports basic generic navigation operations along its five dimensions. We validated the model in the context of the SEED-Layout system and used it to extend the built-in navigation tools of the system through novel ones, which we subjected to a limited usability study. The study suggests that these tools have promise and warrant further investigation.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	d910
authors	Kieferle, Joachim B. and Herzberger, Erwin
year	2002
title	The “Digital year for Architects” Experiences with an integrated teaching concept
doi	https://doi.org/10.52842/conf.ecaade.2002.088
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 88-95
summary	The “digital year for architects” is an integrated course for graduate architecture students, that has been held since 1997 at Stuttgart University. Its concept is to link together traditional design teaching and working with computers. Three seminars and one design project are the framework of the course, in which the students are taught in design of e.g. image and space composition, typography, video, using virtual reality, theoretical basics for the final design project like information management or working environments, approximately a dozen software packages and finally a visionary design project. It has shown that the advantage of an integrated course compared to separate courses is the more intensive dealing with the project as well as achieving better skills when learning the new media. Not only because the project topics are different from usual architecture and more abstract, the main effect is to widen the students way of thinking and designing.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	9ad5
authors	Lee, Chia Hsun and Jeng, Taysheng
year	2002
title	A ContextManager for Multimedia Presentation in Intelligent Corners: A Human-centric Interaction Approach
doi	https://doi.org/10.52842/conf.caadria.2002.159
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 159-166
summary	This paper presents an Intelligent Corner project using a ContextManager for coupling human action with physical material and digital information. This paper focuses on multi-modal interaction between human and tangible media in a ubiquitous computing environment. A ContextManager is deployed for managing humancentric interaction and mediating computational tasks in an Intelligent Corner. This experimental study integrates tangible user interface and ubiquitous computing for users to experience multimedia presentation in a rich and comprehensive environment.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ga0231
id	ga0231
authors	Sparacino, Flavia
year	2002
title	Narrative Spaces: bridging architecture and entertainment via interactive technology
source	International Conference on Generative Art
summary	Our society’s modalities of communication are rapidly changing. Large panel displays and screens are be ing installed in many public spaces, ranging from open plazas, to shopping malls, to private houses, to theater stages, classrooms, and museums. In parallel, wearable computers are transforming our technological landscape by reshaping the heavy, bulkydesktop computer into a lightweight, portable device that is accessible to people at any time. Computation and sensing are moving from computers and devices into the environment itself. The space around us is instrumented with sensors and displays, and it tends to reflect adiffused need to combine together the information space with our physical space. This combination of large public and miniature personal digital displays together with distributed computing and sensing intelligence offers unprecedented opportunities to merge the virtual and the real, the information landscape of the Internet with the urban landscape of the city, to transform digital animated media in storytellers, in public installations and through personal wearable technology. This paper describes technological platforms built at the MIT Media Lab, through 1994-2002, that contribute to defining new trends in architecture that mergevirtual and real spaces, and are reshaping the way we live and experience the museum, the house, the theater, and the modern city.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	6a37
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
doi	https://doi.org/10.52842/conf.acadia.2002.013
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 13-23
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies ina tightly structured framework for the integration of Environmental Control Systems (ECS) principles intoa third year design studio. An interchangeable use of digital media and physical material enabledarchitectural explorations of rich tactile and luminous engagement.The principles that provide the foundation for integrative strategies between a design studio and buildingtechnology course spring from the Bauhaus tradition where a systematic approach to craftsmanship andvisual perception is emphasized. Focusing particularly on color, light, texture and materials, Josef Albersexplored the assemblage of found objects, transforming these materials into unexpected dynamiccompositions. Moholy-Nagy developed a technique called the photogram or camera-less photograph torecord the temporal movements of light. Wassily Kandinsky developed a method of analytical drawingthat breaks a still life composition into diagrammatic forces to express tension and geometry. Theseschematic diagrams provide a method for students to examine and analyze the implications of elementplacements in space (Bermudez, Neiman 1997). Gyorgy Kepes's Language of Vision provides a primerfor learning basic design principles. Kepes argued that the perception of a visual image needs aprocess of organization. According to Kepes, the experience of an image is "a creative act ofintegration". All of these principles provide the framework for the studio investigation.The quarter started with a series of intense short workshops that used an interchangeable use of digitaland physical media to focus on ECS topics such as day lighting, electric lighting, and skin vocabulary tolead students to consider these components as part of their form-making inspiration.In integrating ECS components with the design studio, an nine-step methodology was established toprovide students with a compelling and tangible framework for design:Examples of student work will be presented for the two times this course was offered (2001/02) to showhow exercises were linked to allow for a clear design progression.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	d5e1
authors	Bugajska, Malgorzata Maria
year	2002
title	Spatial Visualization of abstract Information: A Classification Model for Visual Spatial Design Guidelines in the Digital Domain
source	Swiss Federal Institute of Technology, ETH Zurich
summary	Visualization of abstract information refers to the design of graphical representations of information that has no simple relation to known concrete or physical forms. Designing visualizations of abstract information requires proposing visual representation for often a large body of data pants. determining a meaningful structure for the complex relations among them and suggesting a method for Interacting with this body of data. Spatial perception plays an Important role for cognitive processing when interacting with abstract information, slice spatially-organized Information can be accessed and operated on rapidly and effortlessly, especially when a spatial arrangement reveals the conceptual organization of Information. This thesis focuses on aspects of the spatial visual design of abstract information presented as computer-generated. dynamic and interactive images accessible through flat displays. The process of spatial visualization design is shaped by various factors including interactive, perceptual, navigational as well as organizational and metaphorical aspects and as such requires an interdisciplinary approach. Therefore, in researching spatial visual design. it is crucial to use methods facilitating the process of sharing competencies among different disciplines. In this thesis, we introduce a new classification model accommodating features important in designing effective spatial visualizations of abstract information. To enhance the effectiveness of spatial visualization, this model offers a holistic approach in classifiying spatial Visualization features. As part of the model, we analyze properties already used in architectural representation and other visual design disciplines for spatial presentations as well as investigate their potential usage in digital domains of abstract information. The process of spatial visualization In the digital environment is mostly based on the practical experience of a designer. and therefore the majority of spatial design know-how is heuristic in nature. Based on this assumption, we present a set of guidelines addressing the general problem of spatial design. The Spalial Design Classificahon Model, Visual Spatial Properties and Spatial Design Guidelines build an extendable infrastructure which becomes a first step towards augmenting the quality of spatial information design- We propose to use this infrastructure as a general blueprint for structuring the exchange of expertise in Interdisciplinary problem-solving processes.
series	thesis:PhD
last changed	2003/05/15 12:22

_id	sigradi2010_73
id	sigradi2010_73
authors	Hunold, Lara Arthur; Gorge Canella Eduardo; Giacaglia Marcelo Eduardo; Corrêa Norberto; Moura da Silva
year	2010
title	Brinquedos, modelos: uma atividade lúdica se transforma em curricular com apoio das novas tecnologias de fabricação digital [Toys, models: a fun activity becomes curriculum, supported by new digital fabrication technologies]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 73-76
summary	This research seeks to assess the use of digital fabrication of toys reusing wood from earlier models produced in undergraduate courses in architecture and design. Froebel (2002) discusses the pedagogical application of blocks of wood that he created, inspired by the information that the architect Frank Lloyd Wright was influenced in his childhood by playing with toy blocks. Among other authors, we found a catalog from the Aladdin factory that is owned by Uruguayan modern artist Torres Garcia. The research aimed to recreate similar educational toys within a context of global crisis and interest in sustainability.
keywords	design education; design methodology; digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ddssar0216
id	ddssar0216
authors	Jones, Dennis B.
year	2002
title	The Quantum Matrix:A Three Dimensional Data Integration and Collaboration ToolFor Virtual Environments
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	If a picture is worth a thousand words, what if they could walk and talk? How would you like to bring a whole new dimension to your ideas; to use visualization to convey a sense of time and motion, to use imagery to give your ideas vividness; to use sound to give them voice and view them threedimensionally. The Matrix allows you to do all of this and much more. The Matrix resembles Rubik’s cube, but its purpose is to store, manage and access data of all types and to view them in three dimensions in virtual environments such as the CAVE and on your desktop. The current version can store, access and view almost anything that is in digital form, including:Text files Pictures Video Clips Sound Files Spreadsheets URL’s HTML pages Databases CAD drawings Gantt Charts Business Graphics VRML modelsExecutable Programs OLE (Object Link & Embedded) The Matrix is a three-dimensional multimedia and document management tool. The Matrix anticipates the convergence of electronic media into one consistent environment for analysis and representation. the Matrix uses VMRL and OpenGL technologies to allow the user to be immersed in their data as withCinerama, IMAX and Virtual Reality Environments. The Matrix allows the user to exercise their creativity by interactively placing and organizing their data three dimensionally and navigating through and viewingdata and documents in 3D (monocular and binocular – stereo). The Matrix user interface is simple to use. Employing the now familiar “drag and drop” method to manage data and documents. Items can be placed into the matrix grid at a user selected matrix cube location. Upon dropping a document on a cube it appears as a mapped image onto the surface. Navigating through the 3D Matrix-space is fun. All navigation uses real-time animation giving you instant feed back as to where you are. Data drilling is as simple as mouse click on a Matrix cube. Double clicking the on an object in the matrix activates that object. Data dreams was an image that preexisted the program by several years. The dream was to create a new way oforganizing and exploring data. The Qube image was created using Microstation by Bentley Systems, Inc. The figure was modeled using Poser by MetaCreations and composited using Adobe Photoshop.
series	DDSS
last changed	2003/08/07 16:36

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
doi	https://doi.org/10.52842/conf.ecaade.2002.386
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
doi	https://doi.org/10.52842/conf.acadia.2002.097
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c229
authors	Cavazos, María Estela Sánchez
year	2002
title	Experiencia en Digitalización de Procesos de Diseño Arquitectónico Caso Taller de Modelación Espacial, Universidad Autónoma de Aguascalientes [Experience in Digitalization Processes of Architectural Design: Study Case of Space Modeling, Independent University of Aguascalientes ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 252-256
summary	This project has been based in an experience that took time in the years 1999 and 2000 where a group of 13 students of the Architectonic Design Masters in the U.A.A. were submitted to a project that consisted in register their Architectonic Design Processing during a year with the main purpose of having the most complete material possible to be used as material for different research projects. At the end of the architectonic project the students scanned all the graphics and ordered them in the format that was established by the group using ACDSee32 as the program, which resulted very simple to manage and permitted to order the graphics and write comments to them as it was thought. The result obtained was 12 ordered texts by seven segments pefectly identifi ed and with easy manage for any investigation that you want to realice with them, in fact today exist two fi nished investigations that were realized with this information added to one formal investigation and some informal in process.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	6440
authors	Chang, Y.L., Lee, Y.Z. and Liu, Y.T.
year	2002
title	Construction of Digital City in Physical City: Cyberspatial Cognition Approach to the Project of Hsin-Chu Digital City in Taiwan
doi	https://doi.org/10.52842/conf.caadria.2002.109
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 109-116
summary	The cyberspace upon physical space forms a new spatial structure to increase the influence on the urban fabric and the concept of space in architecture. Today, digital cities are being developed all over the world. By using a city metaphor, digital cities integrate urban information and create public spaces. How do digital cities directly connect to physical cities and become an imaginable city? Therefore, we argue that a new spatial analysis theory must be established for digital city, comparing with theories of disciplines, to find the explicitly spatial structures and relations in digital city upon physical city.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	8cc7
authors	Chen, Julie
year	2002
title	DAM: Digital Animation Museum
source	University of Washington, Design Machine Group
summary	The interaction of architecture and technology is, to many, simply a relationship between a building and the materials from which it is constructed. This thesis, however, explores the notion that architectural spaces and forms are influenced not only by construction technology, but also by everyday technology that we use to better our lives, and particularly focuses on the potential impact of wireless information technology on architecture. This thesis asserts that the implementation of information technology in architecture encourages greater interactivity between building and visitor and also increases flexibility in spatial programming. By incorporating wireless information technology as an essential design element of a museum, traditional notions of control points can be eliminated, and the building experience may be manipulated in a variety of ways to interact with and respond to visitor interests and preferences. In this way, both building and visitors are able to collaborate to produce a unique and individualized experience of the building space.
series	thesis:MSc
email
more	http://dmg.caup.washington.edu/xmlSiteEngine/browsers/stylin/publications.html
last changed	2004/06/02 19:12

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	f6d6
authors	El Araby, Mostafa
year	2002
title	Possibilities and Constraints of using Virtual Reality in Urban Design
source	CORP 2002, Vienna, pp. 457-463
summary	This study aims at exploring the rapid growth of the use of Virtual Reality techniques in the field of Urban Design. Currently, VirtualReality —the ultimate representation— and Virtual Environments are the most growing fields of information technology and have agreat media attention. This research discusses the possibilities and limitations of applying Virtual Reality (VR) technology inenvironmental simulations for urban design practice. There is evidence to suggest that the use of such technology will enhanceconceivable image of any proposed project at any urban setting for users, designers and clients. Therefore, city officials andadministrators (clients) and the public (users) can reach better decisions regarding proposed projects within their towns and cities.Specifically, this research structured in several interdependent parts: the first part is concerned with the definition of VR as well as abackground of its history and current achievements. Types and components of VR systems are described and traditional simulationtechniques are reviewd. In addition, a discussion of current attempts in incorporating VR in urban design disciplines are presented.This discussion raises the question of appropriateness of the VR techniques in urban design projects. An assesment of both potentialsand limitations of aplying this technique, i.e. VRML (Virtual Reality Modelling Language), are discussed. This study definespotentialities, constraints and problems of using this technique, and recommends future research efforts in the field of using theVirtual Reality as a medium for delivering real content for those interested in the design of the built environment.
series	other
email
more	www.corp.at
last changed	2002/12/19 12:19

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	f89e
authors	Hermanson, Robert D.
year	2002
title	Re- Presentations: Media Inquiries Regarding Architecture
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 14-18
summary	Within the framework of architectural practice as well as the academy, media supported worldwide interdependence and transient cultural waves are essential forces activating the current globalization phenomenon. Schools that have always engaged themselves in international dialogue, are now increasingly immersed in the rapidly developing media arena andglobal information networks. In this paper I propose a theoretical and pedagogical framework in which the concept of migration provides a useful model with which to investigate the transitory natures permeating cultures. These involve not only the literal moving from one physical world into another, but also the more abstract - from that of the so called “real” world into that of the “virtual.” Through what I call re-presentations an experimental studio was conducted at the Universidad Nacional del Litoral in Santa Fe, Argentina involving multi-cultures ( the USA and Argentina) and multi-disciplines ( film/video and architecture). The conclusion suggests however, that such re-presentations posit paradoxical questions.
series	SIGRADI
email
last changed	2016/03/10 09:53

For more results click below: