Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 253

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2009_193
id	ecaade2009_193
authors	Frumar, Jerome; Zhou, Yiyi
year	2009
title	Beyond Representation: Real Time Form Finding of Tensegrity Structures with 3d ‘Compressed’ Components
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2009.021
wos	WOS:000334282200001
summary	Tensegrity structures are of interest to architecture and engineering as a practical means to explore lightweight and rapidly deployable modular structures that have a high degree of geometric freedom and formal potency. The notion of tensegrity structures with 3D ‘compressed’ components is introduced and their feasibility is demonstrated through selected physical models. Attempts to further explore the architectural potential of tensegrity structures within a computational environment have proven difficult, as they are statically indeterminate and require form finding procedures to “find a geometry compatible with a self-stress state” (Motro 2002). An overview of tensegrity ‘capable’ software that can be used for architectural design is followed by a discussion that introduces an additional computational method based on particle-spring systems. This approach enables real time manipulation of tensegrity networks. Two projects that utilize this unique tool are described.
keywords	Form finding, particle-spring, tensegrity, 3D compressed component
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2005_125
id	2005_125
authors	Schoch, Odilo
year	2005
title	Applying a Digital Chain in Teaching CAAD and CAAM
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 125-129
doi	https://doi.org/10.52842/conf.ecaade.2005.125
summary	This paper describes a successful approach in teaching caad and the use of state-of-the art caad-technologies in postgraduate architectural education. Since it’s first set up in the year 2002, variations of this curriculum were applied on an annual basis. Its main characteristic is the efficient transfer of knowledge and practical use of more than 10 central techniques in CAAD/CAAM (computer aided architectural manufacturing) within the tight period of 6 months. Recipients were international postgraduate students from the field of architecture and related disciplines. Their studies were a full-time course lasting 12 months with six months modular introduction and 6 months individual and group thesis works.
keywords	Teaching, Collaborative Design, CNC Production, Mass Customisation, Education & Practice, User Participation, Web-based Design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	2ed6
authors	Serrentino, Roberto H. and Molina, Hernán
year	2002
title	Arquitectura modular basada en la teoría de policubos [Modular Architecture Based on the Theory of Policubos]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 264-267
summary	Modular Architecture refers to the design of any system composed of separated components that can be connected together preserving proportional and dimensional relationships. The beauty of modular architecture is that it is possible to replace or add any component (a module) without affecting the rest of the system. A polycube is a set of unit cubes joined in such a way that each face of the cube is either completely joined to another or completely free of any join. A polycube is a 3D generalization of polyominoes, which consist in a set of squared unit modules joined by their sides. This paper shows how, from the volumetric and modular character of polycubes, it is possible to set correspondences with 3D forms of architectural use, being a very powerful sustain in assisted design processes. The main purposes are:- to be used as creative triggers in the realization of architectural designs- to enlarge the possibilities of CAAD systems exploring modular complex groupings- to develop a simplified procedure of teaching-learning architectural forms.
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	0653
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and Rendering Virtual Architecture by Using Fisheye-Panorama-Based Images and Lightings in HDR-Quality
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 172-174
summary	We use digitally made spherical panoramas as background for vr visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirror-based). For this reason we had the idea to develop the first fisheye-based digitalscanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic-range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) spericalimages together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	a207
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and rendering virtual architecture by using fisheye-panorama-based images and lightings in HDR-quality
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 569-571
doi	https://doi.org/10.52842/conf.ecaade.2002.569
summary	We use digitally made spherical panoramas as background for vr-visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirrorbased). For this reason we had the idea to develop the first fisheye-based digital-scanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic- range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ddssar0213
id	ddssar0213
authors	De Groot, Ellie and Paule, Bernard
year	2002
title	DIAL-Europe: New Functionality’s for an Integrated Daylighting Design Tool
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The European project DIAL-Europe started in April 2000 and intends to enhance and to enlarge the capabilities of the LesoDIAL software. The aim of this “Swiss” tool was to give architects relevant information regarding the use of daylight, at the very first stage of the design process. DIAL-Europe focuses on European standards and climatic data. Further, a Heating & Cooling evaluation module and an Artificial Lighting module will be added. The objective of the Heating & Cooling module is to indicate the implications of the user’s design on heating and cooling energy and on thermal comfort.The objective of Artificial Lighting module is to develop a tool that will give an estimation of illuminance values on the work plane and provide guidance on qualitative aspects and visual comfort as well as on switching control and integration with daylight based on generic light sources and luminaires. Furthermore, the scope of the examples of simulated rooms will be increased in order to allow the user to compare their design with more similar cases. This paper will present the state of achievement and give an overview of the first version of the DIAL-Europe software, which will beavailable at the beginning of 2002.
series	DDSS
last changed	2003/08/07 16:36

_id	6a37
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 13-23
doi	https://doi.org/10.52842/conf.acadia.2002.013
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies ina tightly structured framework for the integration of Environmental Control Systems (ECS) principles intoa third year design studio. An interchangeable use of digital media and physical material enabledarchitectural explorations of rich tactile and luminous engagement.The principles that provide the foundation for integrative strategies between a design studio and buildingtechnology course spring from the Bauhaus tradition where a systematic approach to craftsmanship andvisual perception is emphasized. Focusing particularly on color, light, texture and materials, Josef Albersexplored the assemblage of found objects, transforming these materials into unexpected dynamiccompositions. Moholy-Nagy developed a technique called the photogram or camera-less photograph torecord the temporal movements of light. Wassily Kandinsky developed a method of analytical drawingthat breaks a still life composition into diagrammatic forces to express tension and geometry. Theseschematic diagrams provide a method for students to examine and analyze the implications of elementplacements in space (Bermudez, Neiman 1997). Gyorgy Kepes's Language of Vision provides a primerfor learning basic design principles. Kepes argued that the perception of a visual image needs aprocess of organization. According to Kepes, the experience of an image is "a creative act ofintegration". All of these principles provide the framework for the studio investigation.The quarter started with a series of intense short workshops that used an interchangeable use of digitaland physical media to focus on ECS topics such as day lighting, electric lighting, and skin vocabulary tolead students to consider these components as part of their form-making inspiration.In integrating ECS components with the design studio, an nine-step methodology was established toprovide students with a compelling and tangible framework for design:Examples of student work will be presented for the two times this course was offered (2001/02) to showhow exercises were linked to allow for a clear design progression.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	757b
authors	Lee, Jaemin and Akleman, Ergun
year	2002
title	Practical Image Based Lighting
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 279-288
doi	https://doi.org/10.52842/conf.acadia.2002.279
summary	In this paper, we present a user-friendly and practical method for seamless integration of computergeneratedimages (CG) with real photographs and video. In general, such seamless integration isextremely difficult and requires recovery of real-world information to simulate the same environment forboth CG and real objects. This real-world information includes camera positions and parameters,shapes, material properties, and motion of real objects. Among these, one of the most important islighting.Image-based lighting that is developed to recover illumination information of the real world fromphotographs has recently become popular in computer graphics. In this paper we present a practicalimage-based lighting method that is based on a simple and easily constructable device: a square platewith a cylindrical stick. We have developed a user-guided system to approximately recover illuminationinformation (i.e. orientations, colors, and intensities of light sources) from a photograph of this device.Our approach also helps to recover surface colors of real objects based on reconstructed lightinginformation.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddssar0223
id	ddssar0223
authors	Mahdavi, A, Suter G. and Ries, R.
year	2002
title	A Representation Scheme for Integrated Building Performance Analysis
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents a representational scheme for integrated building performance analysis. The underlying research work was motivated by the need for seamless exchange of structured design information.A comprehensive and widely accepted industry standard suitable for exchanging design information among the various AEC (Architecture/Engineering/Construction) applications has yet to emerge. As a contribution to this on-going discussion, we present a specific approach to the integration problem in building product modeling. This approach can be viewed as pragmatic or bottom-up in the sense that itwas driven by the informational needs of related individual domains (particularly in the early stages of design) rather than by a quest for a universally applicable solution. In this paper, we describe a schemawhich emerged from the SEMPER effort, a multi-year project aimed at supporting detailed performance analysis for early design in the energy, life-cycle analysis, lighting, and thermal comfort domains. Thisschema relies on a representational division of labor between a shared building model, and various disciplinary (domain) models. Specifically, we present a documentation of the shared object model together with disciplinary models for the energy, light, acoustics, and life-cyle assessment domain.
keywords	building product models, building performance, integration
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0212
id	ddssup0212
authors	Nascimento, M.A.P., Francisco, S.D., Souza, L.C.L. and Silva, A.N.R.
year	2002
title	A Multimedia Application to Support Professionals in an EnvironmentallyResponsible Building Design Process
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	One of the problems faced by the design professionals in trying to incorporate thermal and acoustic concerns when designing a building is the quantity and diversity of building materials that can be applied to improve a poor indoor environment and, in many cases, to later reduce energy consumption. The large amount of information on building materials usually provided as documents makes it almost impossible to the designer to compare products. In the light of the stated facts, the objective of this work was the development of a multimedia application, which was thought as a module of a more comprehensive system able to support professionals in an environmentally responsible building design process. The application takes advantage of the ability of computers to handle texts, images, sounds and movies to introduce several building materials and their characteristics to the designers, in an interactive way. The conclusion of this stage shows that rather than being a module of a larger system, the developed application can work as a powerful standalone multimedia catalogue of building materials that have special interest on thermal, acoustic, and thermal-acoustic applications. It is an application that are notonly fundamental in a support system for effective building design, but also a powerful tool for training architecture students as part of an environmentally responsible building design process.
series	DDSS
last changed	2003/08/07 16:36

_id	3439
authors	Paranandi, M. and Sarawgi, T.
year	2002
title	Virtual Reality on Architecture: Enabling Possibilities
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 309-316
doi	https://doi.org/10.52842/conf.caadria.2002.309
summary	This paper examines the potential of Virtual Reality (VR) technologies for architectural applications. There has been a great deal of anticipation for its implications for architecture since Ivan Sutherland's first VR system in the 60's. The term VR was formalized and became popular in the main stream in the late 80's and became an industry by the late 90's. Although it has found good applications in Medicine, Flight Simulation, and Video Game Industry, its effect on architecture remains imperceptible. In the work that we review, we found that the success of VR in architecture has primarily been in the passive and exploratory applications. We also note that at the present time, the cost of VR systems is directly proportionate to the level of photorealism and immersion. We contend that photorealistic visualization and total immersion are not absolute prerequisites for making most design decisions. Hence, through this paper we bring to light the inherent promise of VR technology and the potential impact it could have with its current limitations, on the way we conventionally think and design our built environment pushing it beyond space and time constraints.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	1992
authors	Russell, Peter
year	2002
title	Using Higher Level Programming in Interdisciplinary teams as a means of training for Concurrent Engineering
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 14-19
doi	https://doi.org/10.52842/conf.ecaade.2002.014
summary	The paper explains a didactical method for training students that has been run three times to date. The premise of the course is to combine students from different faculties into interdisciplinary teams. These teams then have a complex problem to resolve within an extremely short time span. In light of recent works from Joy and Kurzweil, the theme Robotics was chosen as an exercise that is timely, interesting and related, but not central to the studies of the various faculties. In groups of 3 to 5, students from faculties of architecture, computer science and mechanical engineering are entrusted to design, build and program a robot which must successfully execute a prescribed set of actions in a competitive atmosphere. The entire course lasts ten days and culminates with the competitive evaluation. The robots must navigate a labyrinth, communicate with on another and be able to cover longer distances with some speed. In order to simplify the resources available to the students, the Lego Mindstorms Robotic syshed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).ural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosg and programming a winning robot. These differences became apparent early in the sessions and each group had to find ways to communicate their ideas and to collectively develop them by building on the strengths of each team member.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2006_581
id	caadria2006_581
authors	KUO-HSIEN HUANG, CHING-HUI HUANG
year	2006
title	APPLICATIONS OF THE DIGITAL MODEL DATABASE FOR TAIWAN CITY AND ARCHITECTURE: The interactive entertainment platform
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 581-583
doi	https://doi.org/10.52842/conf.caadria.2006.x.d1a
summary	In Taiwan, the National Science Council (NSC) has launched the “National Digital Archives Program” (NDAP) since 2002. We participated in two projects: “The 3D digital museum of Taiwan city and architecture” and “Digital model database and professional service for Taiwan city and architecture”. The first one attempted to build a virtual museum for Taiwan city and architecture through the past four hundred years. The second one was a value-added project which intended to further apply the digital contents of the previous one. This project was consisted of 3D refined data, digital knowledge database, and architecture professional service. We were responsible for the 3D refined data. As a result, the digital model database included three cities: Hsinchu, Chiayi, and Tainan, as well as sixty-four architecture models. The interactive entertainment platform is an important leisure in our daily life. In general, the interactive entertainment includes five types: arcade game, PC game, on-line game, TV game, and mobile entertainment. This research pays attentions to the arcade game which presents dynamic interactions between machine and users. Following the improvements of design techniques, we have opportunities to experience many arcade games with different purposes, such as drum game, dance game, and fishing simulator. However, we further apply the digital model database to create an interactive entertainment platform for a racing arcade game.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	diss_kouzeleas
id	diss_kouzeleas
authors	Kouzeleas, S.
year	2002
title	DEVELOPMENT OF A HELP TOOL IN ARCHITECTURAL ACOUSTICS SIMULATION ADAPTABLE IN A MODELISATION CAD SYSTEM
source	Ph.D. Thesis, Order number 2642, University of Bordeaux 1, 2002, France
summary	The aim of the proposed research in this thesis is the rapprochement of the acoustical conception and simulation with the architectural conception in order to give the architect the means to appreciate and evaluate the acoustical results, facilitate his collaboration with the acoustician, and, finally, allow him to have a help base during his architectural conception for acoustical simulation. This is proposed by the realisation of a plate-form of help adaptable to an architectural modelisation C.A.D. program, integrating acoustical calculate motors, graphical modules and research developed. This research concerns the definition of different processes of modelisation and simplification of architectural models for acoustical simulation, the translation of the acoustical results in an architectural way, the integration of an architectural approach to the acoustical conception, and an acoustical integrated multimedia database.
keywords	architectural acoustics, acoustics simulation, acoustics conception, architectural
series	thesis:PhD
type	normal paper
email
last changed	2005/10/17 21:57

_id	160eaea2001
id	160eaea2001
authors	Stellingwerff, Martijn
year	2002
title	Architects’ Visual Literacy
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	This paper presents a partial summary of my PhD research with the working title: “View preferences and effects - a study of visual language for architectural design within a represented urban context”. In contrast to much VR-research that focuses on techniques for the public presentation of a completed design or an existing urban site, this research focuses on the use of 3D-city-models during the architectural design process. The models serve as a source of visual information that can be used to bring the design in a good relation with the yet existing built environment. In the research, I investigated the possibilities to make a VRML - city-model adaptable in its representation, in order to adhere to both the factual and the imaginative needs of a designing architect. The paper consecutively presents the problem, the conceptual change and development of research questions, the methodology and a brief overview of the research findings.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	c840
authors	Cheung, S.-O., Tong, T.K.-L. and Tam, C.-M.
year	2001
title	Site pre-cast yard layout arrangement through genetic algorithms
source	Automation in Construction 11 (1) (2002) pp. 35-46
summary	The use of modular construction has gained wide acceptance in the housing sector. Standardized modular units are often pre-cast on site. The establishment of site pre-cast yard, in particular arranging the pre-cast facilities within the compound, presents real challenge to site management. This complex task is further aggregated with the involvement of several resources with different transport cost. A GA-model is developed for the search for a near optimal layout solution. The fitness function is to minimize the total transport cost for a pre-determined daily output. The use of the model is illustrated by an example. When compared with the best solution within the initial population, 18.45% reduction in cost for resources flow was achieved by the near optimal layout arrangement arrived at the 673rd trial. It is also suggested that the model can be extended to other layout problems such as warehouse and production line.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0204
id	ga0204
authors	García-Salgado, Tomás
year	2002
title	Modular Perspective as a Method for Generative Design
source	International Conference on Generative Art
summary	Apparently there are many methods for perspective but if we categorize them there are just a few. Some criterions of classification relate perspective to the so-called 1-point, 2-point and 3-point methods, others —more formally— to projective geometry, descriptive geometry or vectorial algebra. Of course we cannot forget to mention the early treatises on perspective such as Alberti’s Della Pittura or Piero’s De Prospectiva Pingendi, which escapes any classification. Our aim on this article is not precisely to solve the classification problem rather we propose a new comprehensive method for perspective, capable of 3D representation without using vanishing points.The modular perspective method allows us to work in true three-dimensionality on the perspective plane (PPl). We will explain how to measure directly on the PPl the triad coordinates (x, y, p) of a given point into the visual space, and how to play with the symmetrical planes X and Y (SPl X/Y) in order to generate or recover data. Finally we will explain how to employ modular perspective in generative design formal-process through an example of application.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ae2a
authors	Fowler, Thomas and Muller, Brook
year	2002
title	Physical and Digital Media Strategies For Exploring ‘Imagined’ Realities of Space, Skin and Light
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 24-27
summary	This paper will discuss an unconventional methodology for using physical and digital media strategies interchangeably in a tightly structured framework for the integration of environmental control systems (ECS) principles into a third year design studio. An eight-step methodology enabled architectural explorations of rich tactile and luminous engagement. The principles that provide the foundation for these integrative strategies between a design studio and building technology course, spring from a systematic approach that follows the tradition of the Bauhaus principles (e.g., Albers, Moholy-Nagy, Kandinsky and Kepes) of craftsmanship and visual perception.A series of intense short workshops focused on day lighting, electric lighting, and skin vocabulary to lead students to consider these components as part of their form-making inspiration. Examples of student work and their feedback on this methodology process will show how the exercises were linked to allow for a clear design progression.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	10eaea2001
id	10eaea2001
authors	Gorczyca, Adam and Wrona, Stefan
year	2002
title	Evaluation in 3D Endoscopic Simulation – Application in Architectural Studios
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	Simulation techniques are nowadays commonly spread in CAAD applications. They are so popular, that even notion of SAAD (Simulation Aided Architectural Design) is used. Practical implementation of simulation techniques is present almost everywhere in our lives. All of us had a possibility of watching on TV, how Russians are going to pick up their atomic submarine “Kursk” from a sea-bottom. It is very tragic but significant example. People convinced themselves, that it is much cheaper to analyze any “virtual environment”, than to experiment with reality. Especially, when cost this “tampering” is extremely expensive. That is why some light and scenography simulation are prepared by computers. From the same reasons filmic special effects are produced (sink of Titanic…). There are also obvious medical applications, where endoscopic surgery replaced invading methods, while simulation of human body help students to learn anatomy. Forensic medicine try to identify faces of murders or body remains.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

For more results click below: