Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 129

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0207
id	ddssar0207
authors	Conti, G. and Ucelli, G.
year	2002
title	A Java3D Tool for Real-Time Collaboration in a Virtual Reality CAADEnvironment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today the development of network-based virtual communities and the use of avatars have brought a new level of complexity to the meaning of virtuality, providing the technology for remote presence and collaborative experiences. In this project the intention was to pursue this articulated vision of VR in order to assist the design profession during the early stages of the design process. The objective was to provide a tool that is capable of creating 3D shapes in a shared VR environment, thus allowing thedesign and its evolution to be shared. The use of the Java programming language was a natural choice for this project. Because of Java’s performance scalability and hardware independence the concept ofCAAD has been extended, making it possible to create a VR environment that can co-exist between high-end supercomputers and standard PCs. The project is currently being tested using PCs and an SGI system running a Reality Centre. The research reported in this paper describes the architecture and application of software that aims to increase the opportunity for collaboration within virtual worlds and enable effective and transparent information exchange.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0206
id	ddssup0206
authors	Dickey, J.W. and Jones, Dennis B.
year	2002
title	CyberQuest Prospector (CQP):A Guide for the Evolutionary Discovery Process
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	CyberQuest Prospector (CQP) is a tool to guide an individual or team through the evolutionary process of finding better approaches to a particular problem, project, program, plan, or design. This prospectingprocess can involve, for example, new definitions, different data, altered evaluation techniques and new ideas and actions on many other topics. CQP involves a five step process. At step zero all the requisite historical background knowledge is entered. This knowledge is divided into topical areas or statements. In step one the team updates the various knowledge statements in the system and then assigns a "maturity" to them. The team then adds any new statements (step two). Next, (step three) the team makes decisions on actions to be undertaken and also on the external factors likely to be "in play" in the upcoming time period. After that period (step four) the team records the results and rates the "success" achieved. CQP subsequently changes the associated knowledge statement confidences. In the last step the clock is advanced. The ultimate result is a set of definitions, data, relationships, experimental techniques, issues,implications, and even personality traits in which some degree of confidence has evolved. The CQP process is demonstrated here with an urban transportation planning example involving such diverse topics asplanning/analysis techniques, data collection methods, and procedures for working with advocacy coalition networks.
series	DDSS
last changed	2003/08/07 16:36

_id	bffe
authors	Scaletsky, Celso
year	2002
title	O sistema “Kaléidoscope” de organização de referências ao projeto arquitetural [The system "Kaléidoscope" for reference organization in architectural design]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 129-132
summary	Our research focuses on how to create new types of computer tools, which aims to help early architectural design phase. Therefore we constructed a prototype named “kaleidoscope “. This system is based on the notion that architects use some external references as a strategy to construct new project ideas and that it is possible to organize this referential knowledge.This article presents four guide-lines which allowed the development of the first version of “kaleidoscope” system. As we succeed in broadening and deepening our knowledge - theoretical and empirical – about computers, wediscover that in large part their behavior is governed by simple general laws, that what appeared as complexity in the computer program was to a considerable extent complexity of the environment to which the program was seeking to adapt its behavior.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
doi	https://doi.org/10.52842/conf.ecaade.2002.386
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	ga0236
id	ga0236
authors	Antonini, Riccardo
year	2002
title	Shared, Collective, Generative, Dynamic Virtual Environments - Geneve
source	International Conference on Generative Art
summary	In this project we plan to create an experimental novel medium setup for the study of the “presence” experience in shared, collective, generative, dynamic virtual environments (GENEVEs) in order to study the cross interactions between a given GENEVE and/among its creators/users and to explore the logic of presence in each GENEVE. The new shareable / generative media will try to add personal creativity and social dimension to telefruition of contents. For the European Industry having a leading edge in the technology for hw/sw/contents for shareable novel media is both a strategic asset and a social imperative.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	12d9
authors	Anumba, C.J., Ugwu, O.O., Newnham, L. and Thorpe, A.
year	2002
title	Collaborative design of structures using intelligent agents
source	Automation in Construction 11 (1) (2002) pp. 89-103
summary	The construction industry has a long tradition of collaborative working between the members of a construction project team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design disciplines. To aid these meetings, the information and communications technologies that are currently available have been utilised. These have yielded some success but are hampered by the problems posed by the use of heterogeneous software tools and the lack of effective collaboration tools that are necessary to collapse the time and distance constraints, within which increasingly global design teams work. In particular, there are very few tools available to support distributed asynchronous collaboration. Distributed artificial intelligence, which is commonly implemented in the form of intelligent agents, offers considerable potential for the development of such tools. This paper examines some of the issues associated with the use of distributed artificial intelligence systems within the construction industry. It describes the potential for the use of agent technology in collaborative design and then goes on to present the key features of an agent-based system for the collaborative design of portal frame structures. An example is presented to demonstrate the working and benefits of the prototype system, which makes a significant contribution by allowing for peer to peer negotiation between the design agents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
doi	https://doi.org/10.52842/conf.acadia.2002.097
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	6d22
authors	Bermudez, J., Agutter, J., Syroid, N., Lilly, B., Sharir, Y., Lopez, T., Westenskow, D. and Foresti, S.
year	2002
title	Interfacing Virtual & Physical Spaces through the Body: The cyberPRINT Project
doi	https://doi.org/10.52842/conf.acadia.2002.395
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 395-400
summary	The cyberPRINT is a fully immersive, interactive virtual environment that is being generated in rea-timebased on physiological data readings of a human body. In other words, the cyberPRINT is based oncreating interfaces between physical and digital spaces and between biology and informationtechnologies. The cyberPRINT is also an event, wherein a performer is connected to the cyberPRINTgenerator to create a self-sustaining feedback mechanism. Although using the body to electronicallydrive music and media events is not new, most of these works have paid little or no attention to thepotential of interactive 3D virtual environments. Nor have they been so technologically advanced,interdisciplinary intensive (involving architecture, choreography, modern dance, music, bioengineering,medicine and computer science), or architecturally focused as the cyberPRINT.This project covers a wide and fertile territory that goes from the very technical and design oriented tothe very theoretical and interdisciplinary. This paper is intended to (1) expand what has been alreadypublished about this project (Bermudez et al 2000a) and (2) establish potential areas for discussionbefore and after the performance
series	ACADIA
email
last changed	2022/06/07 07:52

_id	c8cc
authors	Berridge, Philip and Brown, Andre
year	2002
title	A Touring Machine
doi	https://doi.org/10.52842/conf.ecaade.2002.488
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 488-493
summary	Contemporary developments in wireless communication and increases in the power and connectivity of hand-held devices present us with increasing opportunities to provide access to computing resources irrespective of geographical location. This increase in portability opens up a range of opportunities to allow access to important data on site. The work described here aims to increase the accessibility of data relating particularly to cities by integrating a palmtop device into a complementary suite of web-based tools. Central to the project are a database of underlying city data and a 3D model of the city.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	c1f5
authors	Blaszczyszyn, Maciej
year	2002
title	Day-to-day Reality of Web-based Collaboration - Tools among European Architect Professionals
doi	https://doi.org/10.52842/conf.ecaade.2002.110
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 110-113
summary	On behalf of phenomenal advantages of project extranet technology You can believe in improving communication among professionals in design and construction industry. But until now, the reality appears not as good. It is technological irony, as evidenced in below presented survey, that advanced solutions for a better collaboration may set up unbreakable barriers. Therefore knowledge of everyday reality in the field of webbased collaboration tools use is critical to all participants of this process, commercial as well academic ones. It is especially important to all European professionals, who are aware of consequences of extending in nearest future borders of European Union, the second biggest market in the world.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.310
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	e601
authors	Braga, Gisele Pinna
year	2002
title	Uma Interface Multimídia para a Comunicação do Projeto Arquitetônico [A multimedia interface for the architectural design communication]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 193-197
summary	The purpose of this work is the development of a Digital Learning Material that helps the process of understanding complex concepts, specifically architectural projects. In order to optimize the comprehension of architectural projects new materials can be developed based on multimedia technology. This technology mix different sorts of messages in one single interface, stimulating students in different ways. As an architectural project has many different information to be tansmittd and assimilated, multimedia technology is a good way to organize all of them to comunicate in an efficient way. All these concepts are applied in a proposal for a multimedia learning material: a prototype about an “Architectural Project”.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	138eaea2001
id	138eaea2001
authors	Breen, Jack
year	2002
title	A Room with a Different View
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	This contribution documents the developments, results and findings of an experimental design visualisation and presentation exercise entitled ‘A Different View of Delft’. The primary aim of this project was to make students aware of the potentials of the active utilisation of physical models for the sake of designerly enquiry. Furthermore the ambition was to explore new ways of using such model ‘environments’ for the benefit of design communication and presentation. For this exercise a ‘game’ situation with clear constraints and rules was developed beforehand. The students were to work out a proposal for a new exhibition space, as an annex to a – hypothetical – existing museum. The new space was to create a fitting ‘setting’ for a single work of art: Johannes Vermeer’s famous View of Delft. The maximum contours of the new exhibition space were given, along with clear guidelines concerning which walls and roof segments might be (partly) opened. The emphasis lay on the viewer’s ‘approach’ to the painting, its positioning and ‘framing’ in an architectural context. A designerly search involving form and space, the choice of colours and materials and particularly the strategic use of (natural) lighting.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	5965
authors	Bueno, Ernesto and Salguero, Cesar
year	2002
title	Centro Virtual de Arte Digital Venezolano - Proyecto de Titulación sobre Arquitectura para el Ciberespacio [Virtual Center of Venezuelan Digital Art - Thesis Project on Architecture for the Cyberspace ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 180-183
summary	This article talks about the development and presentation of our work of Degree Thesis, framed inside a Degree Theses restructuring process in the School of Architecture, in this case, emphasizing in virtual buildings design. The Virtual Centre of Venezuelan Digital Art project is a research and design project of a type of Arts Centre with cyberspace only presence specialized in the exhibition of Venezuelan digital art. The first part of it needed an information research, studies in the diverse ways in thatcomputers have being used for virtual museums design, the diverse focuses for the creation of this type of museums and the study of a museum model that adapts to the way this project were focused. When completing the theoretical basement, the individual proposals were developed. In general terms, the prospective results were achieved.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	046e
authors	Burry, Mark
year	2002
title	Rapid prototyping, CAD/CAM and human factors
source	Automation in Construction 11 (3) (2002) pp. 313-333
summary	CAD/CAM techniques for rapid prototyping, profile cutting, and form sculpting/routing/moulding are well-advanced for the vehicle and manufacturing industries. Although their migration to the building sector is readily achievable as a substitution for much of traditional construction, there are factors that work against this. Apart from the singular `one-off' nature of most architectural projects that limits ready exploitation of techniques derived in the main for mass-manufacture, there remains the problem of apprenticeship, and how to maintain a healthy lineage of skills for work otherwise less readily taken-up using automated manufacturing procedures. Continuing construction for Gaudí's Sagrada Família Church in Barcelona has provided a fertile test-bed for integrating rapid prototyping and CAD/CAM production where appropriate. Nevertheless, human factors such as maintaining the status quo with regard to apprenticeship and maintaining the skill lineage have provided some healthy insights into both the risks as well as the opportunities for greater involvement with CAD/CAM, and in particular, rapid prototyping in the building construction sector. This paper reports on and discusses the findings of case studies from the Sagrada Família Church project.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2003_092
id	sigradi2003_092
authors	Castañé, D., Tessier, C. and Deho, C.
year	2003
title	Prácticas educativas: su impacto y riesgo en las tecnologías digitales (Educational Practices: Their impact and risk in digital technologies)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Based on the latest didactic teaching theories, this project presents a critical analysis of dynamic educational practices, which have been actively utilized through the last decade by the department of research and instruction in the School of Architecture at the University of Buenos Aires. This work proposes a journey through the landmarks that recognize the impact of technology on teaching best practices, mainly contained in a technical course. It presents the didactic theories of Bruner (90), Perkins, Gardner (93), Burbules (2001), E. Litwin (2002) and others. Crucial representative work developed by students has been taken to introduce criteria and construct practical reflections to arrive at an enriching proposition.
series	SIGRADI
email
last changed	2016/03/10 09:48

For more results click below: