Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 206

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup0205
id	ddssup0205
authors	Deguchi, A., Tabira, Y., Matsuura, H., Nakano, H. and Arima, T.
year	2002
title	Integration System of Archaeological and Geographical Informationfor Planning in Historical Regions
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	This study aims to construct the GIS for supporting the planning process and archaeological analysis in the historical regions by integrating geographical data and archaeological data on the sites with ruinsand remains in various period from ancient through medieval which had been buried and was recently excavated in geologic layers and mounds. First, for understanding the trends of environmental condition the excavated sites, we analyze the relationship between the site location and the condition ofgeography and natural environment by using the constructed system.Secondary, we develop the system to make it possible to browse and operate the information on the GIS through the internet. This web GIS constructed by us supports sharing the information on planning for preservation of historical sites among city planners, archaeologists and citizens, and serve as a tool for the collaboration and the coordination of urban development and historical preservation. Finally, as the application with the GIS, we show the results of case studies and point out the merits and effects about usage of the GIS for archaeological analysis as well as learning the local history.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0224
id	ga0224
authors	Tarabella, Leonello
year	2002
title	pCM (pure C Music): a real-time music language
source	International Conference on Generative Art
summary	In order to put to work the facilities offered by the gesture interfaces realised at cART project of CNR, Pisa, I started writing basic libraries for processing sound and for driving the gesture interfaces. In the long run the framework became a very efficient, stable and powerful “music language” based on pure C programming, that is “pure-C-Music”, or pCM. This programming environment gives the possibility to write a piece of music in terms of synthesis algorithms, score and management of data streaming from gesture interfaces. The pCM framework falls into the category of the “embedded music languages” and has been implemented using one of the most popular C compilers or better, multiplatform development systems: Metrowerks’ Code Warrior. As a result a pCM composition consists of a CW project which includes all the necessary libraries, including a DSP.lib consisting of a number of functions able to implement in real-time the typical synthesis and processing elements such as oscillators, envelope shapers, filters, delays, reverbs, etc. The composition itself is a C program consisting, mainly, of the Orchestra() and Score() functions. Everything here is compiled into machine code and runs at CPU speed.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddssar0216
id	ddssar0216
authors	Jones, Dennis B.
year	2002
title	The Quantum Matrix:A Three Dimensional Data Integration and Collaboration ToolFor Virtual Environments
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	If a picture is worth a thousand words, what if they could walk and talk? How would you like to bring a whole new dimension to your ideas; to use visualization to convey a sense of time and motion, to use imagery to give your ideas vividness; to use sound to give them voice and view them threedimensionally. The Matrix allows you to do all of this and much more. The Matrix resembles Rubik’s cube, but its purpose is to store, manage and access data of all types and to view them in three dimensions in virtual environments such as the CAVE and on your desktop. The current version can store, access and view almost anything that is in digital form, including:Text files Pictures Video Clips Sound Files Spreadsheets URL’s HTML pages Databases CAD drawings Gantt Charts Business Graphics VRML modelsExecutable Programs OLE (Object Link & Embedded) The Matrix is a three-dimensional multimedia and document management tool. The Matrix anticipates the convergence of electronic media into one consistent environment for analysis and representation. the Matrix uses VMRL and OpenGL technologies to allow the user to be immersed in their data as withCinerama, IMAX and Virtual Reality Environments. The Matrix allows the user to exercise their creativity by interactively placing and organizing their data three dimensionally and navigating through and viewingdata and documents in 3D (monocular and binocular – stereo). The Matrix user interface is simple to use. Employing the now familiar “drag and drop” method to manage data and documents. Items can be placed into the matrix grid at a user selected matrix cube location. Upon dropping a document on a cube it appears as a mapped image onto the surface. Navigating through the 3D Matrix-space is fun. All navigation uses real-time animation giving you instant feed back as to where you are. Data drilling is as simple as mouse click on a Matrix cube. Double clicking the on an object in the matrix activates that object. Data dreams was an image that preexisted the program by several years. The dream was to create a new way oforganizing and exploring data. The Qube image was created using Microstation by Bentley Systems, Inc. The figure was modeled using Poser by MetaCreations and composited using Adobe Photoshop.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
doi	https://doi.org/10.52842/conf.caadria.2002.151
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2023_428
id	sigradi2023_428
authors	Armagno, Ángel
year	2023
title	The spatial discourse of Power Architectures in Kurt Wimmer's film "Equilibrium".
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1421–1432
summary	This article explores the correlation between the language of cinema and the architectural spatial discourse of power depicted in the film Equilibrium (Wimmer, 2002). This connection is examined through a discursive approach to communication studies. To analyze a specific sequence from the chosen film, a two-stage multimodal analysis was conducted. Initially, the visual analysis method proposed by Kress and Van Leeuwen (2006) designed for the representation of social actors, was employed. Subsequently, in the second stage, sociological and conceptual associations were drawn from the diverse semiotic resources identified in the first phase. The analyzed case revealed several intertextual relationships, among them; Hitler's figure recontextualized as an exemplifying archetype; the panopticon concept representing the spatial power dynamics; the presence of the German zeppelin symbolizing dominance and spreading propaganda through loudspeakers; the religious iconographic influence, its forms and symbols, contributing to a cultural identity inseparable from the history of the Western world.
keywords	Cinema, Power Architectures, Critical discourse analysis, Multimodality, Intertextuality
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	ddssar0204
id	ddssar0204
authors	Asanowicz, A.
year	2002
title	Evolution of Media for Early Design Stages
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In this paper the evolution of media used at early design stages will be considered. In traditional methods of searching and presenting the design idea, the basic tool used was the graphic representation. Implementation of new digital techniques in 60s - 70s focused on the mathematical way ofrepresentation. These methods were “not architect friendly” (lack of graphic representation traditionally used by architects). As a result, the development of methods for digital support of form searching was terminated. The computer was used as a tool for drafting. Creative usage of computers for form searching through sketching on the display was extremely difficult. The computer could be described as an “incompatible pencil”. Only in recent years can we see new efforts in this area ofdesign methodology. Thanks to new technical possibilities we have a new chance for changing the process of designing. New kinds of software and hardware let us use the computer not as a pen, but as a medium. In this paper different new ways of form searching will be considered (from very simple method as the scansketches to very complicated ones, such as the generic algorithms). At the end, the influence of new media on the process of design will be presented.
series	DDSS
last changed	2003/11/21 15:16

_id	1d66
authors	Asanowicz, Aleksander
year	2002
title	Hybrid Design Environment
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 572-576
doi	https://doi.org/10.52842/conf.ecaade.2002.572
summary	This paper discusses some preliminary ideas concerning new design environment or environment of designing. Main thesis of this paper is that process of creation and perception of architecture proceed between Real and Virtual. Architecture is created by analog and/or digital media. A the result we have the multitude and diversity of spaces and tools. Defining these terms is important for understanding a new process of design and a new space of designing. It gives us possibilities to create the new design environment, in which creation of architectural form may be considered as an integrated process connecting the analog, the digital, the real and the virtual. Architectural space, as we know it from physical environments, is supplemented by a virtual space. Physical, architectural and virtual spaces share very similar features in simulation. In virtual models, the boundary between the representation of physical sites and imaginary, virtual sites is vanishing rapidly, resulting in a new reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f321
authors	Ataman, Osman and Bermudez, Julio
year	2002
title	ACADIA'99: media effect on architectural design
source	Automation in Construction 11 (2) (2002) pp. 131-134
summary	The idea of this conference arose from various discussions between us in various different places.We decided to put a proposal together for bothpositions—Technical Chairs and Site Organizers. This was unprecedented and we were anxious. We really wanted to run this conference and run it in Salt Lake City. Our theme AMedia and Design ProcessB was a timely topic and both of us were working on and around it. We thought it was interesting and challenging to define the terms and to establish the relationships between architecture, representation andmedia. In fact, all throughout the history of architecture, representation, media and design have beenrecognized to have a close relationship. Interpretations as to what exactly this relationship is or meanshave been subject to debate, disagreement and changealong the ages. Whereas much has been said about the dialectics between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues, that we have enough context to be able to see and address the relationship between media and human activities with some degreeof perspective.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ac57
authors	Bae, H.A., Kim, M.R., Shin, S.Y., Kim, H.A. and Yoon, C.S.
year	2002
title	An Application of Photogrammetry Measuring Technology to Parametric Modeling of Korean Traditional Wooden Structure
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 139-146
doi	https://doi.org/10.52842/conf.caadria.2002.139
summary	To construct a 3D parametric model of Korean traditional wooden structure, the fundamental process is to obtain the dimensions of each building. An application of measuring high technology helps this process accomplished more efficiently. However PhotoModeler is a photogrammetric program to measure the dimension using photographs. The information derived from PhotoModeler is used to clarify the design rule inherent in a Korean traditional mansion type building - UnHyun Palace.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	0a71
authors	Barros, Diana Rodríguez
year	2002
title	Sistemas hipermediales, efectos del tamaño de los nodos y del número de vínculos [Hyper medial Systems; Size effects of the nodes and number of bonds]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 186-189
summary	A Hypermedia system is, morphologically speaking, an information structure which organizes a set of elements of alphanumeric and graphic nature as a web. This enables a multidimensional access from specific interests. One of the most widespread hypermedia applications is within the field of education. There should be validation criteria which contribute to systematize and direct design processes for didactic hypermedia. This work aims at becoming a contribution by analyzing the relations and effects produced by the number of links and node sizes on some basic didactic uses; particularly, within information search, learning and attitude towards hypermedia. From the results obtained, we propose guidelines for the design of didactic Web Sites and CD Rom.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
doi	https://doi.org/10.52842/conf.acadia.2002.097
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	6d22
authors	Bermudez, J., Agutter, J., Syroid, N., Lilly, B., Sharir, Y., Lopez, T., Westenskow, D. and Foresti, S.
year	2002
title	Interfacing Virtual & Physical Spaces through the Body: The cyberPRINT Project
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 395-400
doi	https://doi.org/10.52842/conf.acadia.2002.395
summary	The cyberPRINT is a fully immersive, interactive virtual environment that is being generated in rea-timebased on physiological data readings of a human body. In other words, the cyberPRINT is based oncreating interfaces between physical and digital spaces and between biology and informationtechnologies. The cyberPRINT is also an event, wherein a performer is connected to the cyberPRINTgenerator to create a self-sustaining feedback mechanism. Although using the body to electronicallydrive music and media events is not new, most of these works have paid little or no attention to thepotential of interactive 3D virtual environments. Nor have they been so technologically advanced,interdisciplinary intensive (involving architecture, choreography, modern dance, music, bioengineering,medicine and computer science), or architecturally focused as the cyberPRINT.This project covers a wide and fertile territory that goes from the very technical and design oriented tothe very theoretical and interdisciplinary. This paper is intended to (1) expand what has been alreadypublished about this project (Bermudez et al 2000a) and (2) establish potential areas for discussionbefore and after the performance
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2003_094
id	sigradi2003_094
authors	Bessone, M., Mantovani, G. and Schanz, J.
year	2003
title	Multimedia y diseño arquitectónico diferente (Multimedia and different architectural design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Hearing and touch may be incorporated into visual representation systems that historically covered creative process, now helped by multimedia. During 2002-2003 we developed an experimental design studio that challenged participants to design architecture from words (using their spelling, pronunciation, location, etc.) and through an inquiry based on the "concept of inwardness". Evoking a word from the association of images and texts as well as seizing its potential tactile and hearing dimensions completed what was a very interactive design process. Such process was utilized to generate images and ideas geared to design/make an "installation" to be displayed at art events.
keywords	Architecture, Design, Word, Image, Sound
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: