Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 513

Reformat results as: short short into frame detailed detailed into frame

_id	49a6
authors	He, J., Tsou, J.-Y. and Lam, S.
year	2002
title	Potential of Using a GIS-based Natural Visual Landscape Evaluation Tool in Large-scale Urban Planning - A Comparative Study in Dongshan New Town
doi	https://doi.org/10.52842/conf.ecaade.2002.478
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 478-487
summary	Natural visual landscape is under deterioration due to improper construction and planning in modern development of China. One of the main reasons is the feebleness in planning supporting methodology and technology in respect for natural visual landscape. In such supporting information, landscape evaluation always acts as a significant component. Especially in comprehensive planning, it is the only approach to access visual value distribution in large-scale region. In this paper, we present a GISbased natural visual landscape evaluation tool through a case study. By an integrated rating statistics function of this tool, visual quality of natural landscape is quantified through analysis in visibility, landuse, and visual resource quality. Then we make comprehensive planning strategies based on this scientific supporting tool. Furthermore, we discuss the potential of this tool by comparing these strategies with schemes of the same project conducted through traditional planning module. This comparative study reveals the efficiency and effectiveness of the tool as well as its implementation in large-scale comprehensive urban planning.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	31ca
authors	Martens, B., Björk, B.-C. and Turk, Z.
year	2002
title	Open, Self Organising Repository for Scientific Information Exchange - The SciX Project
doi	https://doi.org/10.52842/conf.ecaade.2002.222
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 222-229
summary	In the paper-based world, CAAD-associations, such as eCAADe, and scientific publishers aim at getting the right people together and for making sure their work gets distributed to their peers. Electronic networks, such as the Internet, are providing scientists with the means to pursue those activities on their own. In this paper we present the goals of an EU project called SciX. The goal of SciX is to analyze the business processes of scientific publishing, to invent new publication models and through a series of pilots to demonstrate how this should work. In the envisioned scenarios, professional associations such as eCAADe play an important role. Their members are the potential users of SciX’s platforms, authors and readers of the papers. Associations could also become the publishers and archivists of the knowledge created within their respective community. The objectives of this contribution focus on involving the eCAADecommunity in the developments in SciX, on fine-shaping the goals as well as on defining the requirements and monitoring the usability of the pilots.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	d0d1
authors	Martens, B., Björk, B.-Ch. and Turk, Z.
year	2002
title	The SciX Project: Re-Engineering from Paper-based to Free Electronic Publishing
doi	https://doi.org/10.52842/conf.acadia.2002.179
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 179-185
summary	In the paper-based world, CAAD-associations, such as ACADIA, and scientific publishers aim at gettingthe right people together and for making sure their work gets distributed to their peers. Electronicnetworks, such as the Internet, are providing scientists with the means to pursue those activities on theirown. In this paper we present the goals of an EU project called SciX. The goal of SciX is to analyze thebusiness processes of scientific publishing, to invent new publication models and through a series ofpilots to demonstrate how this should work. In the envisioned scenarios, professional associations suchas ACADIA play an important role. Their members are the potential users of SciX 's platforms, authorsand readers of the papers. Associations could also become the publishers and archivists of theknowledge created within their respective community. The objectives of this contribution focus oninvolving the ACADIA-community in the developments in SciX on fine-shaping the goals as well as ondefining the requirements and monitoring the usability of the pilots.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	bb75
authors	Montagu, Arturo F.
year	2002
title	Urbamedia Desarrollo de una base de datos de fragmentos urbanos de ciudades argentinas y latinoamericanas utilizando tecnología digital “VRML” (Virtual Reality Modelling Language) [“Urbamedia” Database Development of urban fragments of Argentinean and Latin cities utilizing the digital technology of VRML (Virtual Reality Modeling Language)]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 112-115
summary	The proposal of “Urbamedia” is to undertake the development of a 3D virtual and interactive model of an historical area of the city of Buenos Aires. The selected zone is the “Mayo Avenue” including the “Mayo Square”; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting and experimental model of the “Mayo Square” that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. We are also looking to include histórical areas of three cities (Mar del Plata, Rosario and Santa Fe) and eventually other cities from Latin América. Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulationsof the environmental parameters.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	bff9
authors	Proctor, George (Ed.)
year	2002
title	ACADIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.2002
source	Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X / Pomona (California) 24-27 October 2002, 446 p.
summary	The 2002 ACADIA conference finds digital tec_nology ubiquitous as the Association for Computer Aided Design in Architecture moves into its third decade. The organization of ACADIA is on the threshold of restating its mission. After 20 years, many of the organization’s initial objectives have been achieved. ACADIA members have been instrumental in the development of design software, and in bringing computers and digital technology into architectural practice and design school curriculum. At first, ACADIAns faced the debate over the appropriateness and utility of digital technology in the disciplines of architecture, planning and building science. Today the use of computers and information technology is widely accepted by architects and CAAD and digital technology have brought profound change to design practice. The debate in ACADIA has long since moved from "should we use this technology" to "how", "for what" and "why". Now that many practitioners, learning institutions and professional organizations have taken up the call, ACADIA must restate its mission, if it wishes to remain “distinct”. This does not mean that the work of ACADIA is complete. Much remains to be done and much more needs to be improved. ACADIA’s Mission Statement places particular focus on “education and the software, hardware and pedagogy involved in education.” And “(t)he organization is also committed to the research and development of computer aides that enhance design creativity, and that aim at contributing to the construction of humane physical environments.” These are the areas that continue to evolve, grow and provide for ACADIA’s continued relevance. The ACADIA 2002 conference theme reflects the state of digital technology’s application to the discipline, as much as it refers to ACADIA’s future. With the general acceptance of digital technology and CAAD, we have arrived at a place where the work of great interest and relevance lies in the space between what is digital and what is analog. The environments of real space and cyberspace have in a very short time become so intertwined that the space between real and virtual (not to be confused with reality and fantasy) is becoming indistinguishable. You cannot eat, travel, use public utilities, bank, shop, vacation or recreate without at the very least coming into contact with or passing through information space. The landscape between these two environments has become a cultural phenomenon for those societies with access to the Internet and information networks. And while the computer and World Wide Web have empowered individuals, the collective impact of the technology holds all the potential and problems that similarly emerged in other technology induced landscapes. Consider this last point in the context of ACADIA’s stated mission to “enhance design creativity while contributing to the construction of humane physical environments.” And you can see why many of the 260 initial submissions to this conference were in the area of design artifacts and design methodology, providing evidence that ACADIA’s mission remains relevant and in accord with the trends of research and professional creative activity.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	71a0
authors	Gasparski, Wojciech W.
year	2002
title	Designer’s Responsibility: Methodological and Ethical Dimensions
doi	https://doi.org/10.52842/conf.ecaade.2002.010
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 10-011
summary	A designer is anybody who designs, where ‘to design’ - from Latin designare - means ‘to mark out’. Those who design professionally are professional designers, i. e. who „see and seek value in new designs“. Seeing an seeking might be done in two ways: narrower or broader. According to the approach characteristic for design-methodological reductionism those things which are designed are considered the designed objects. In this approach the designer’s task is limited to narrowly understood artifacts like buildings, bridges, machines, devices etc. The relation between a designed object and the reminder of the world is of a secondary consideration or ignored even. The postponed consequences are of physical, social, psychological, and economical nature. Systemic design methodology is different. It describes that ‘what is designed’ in terms of an object of design, a system (a whole) separated from the ‘rest of the world’ to an extent that can minimise a negative ‘immunological effect’. The object of design is a spectem is used. An independently developed programming language entitled NQC (Not Quite C) is used to program the robots. The students are initially given three lectures dealing with robotics in general, methods of locomotion and state based programming principles. Small workshops and discussions about ways of tackling the assigned problem followed these lectures. The work of Rechtin is shown wherein the methodology of “architecting” combines heuristics, hierarchies and intuition to reach design solution spaces. The students are then allowed to form teams whereby they must include members from each faculty. The students are also responsible for forming committees to collectively make decisions about the competitions. The committees decide general attributes of the robots such as size (Constructors Committee) as well as the rules for the competition (Race Committee). The Communication Committee was entrusted to develop a communication protocol (using Infrared transmitters) and the Code Committee decided whuse. Once producing and teaching good science is the main tasks of scholars, those among the scholars who are involved in design science are responsible not only for producing good design science but also for educating designers as reflective practitioners conscious of what every designer should know about objects of design and ethics related to the profession.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	e8e0
authors	Huang, Y.H.
year	2002
title	What Designers See from a Case? A Cognitive Approach
doi	https://doi.org/10.52842/conf.caadria.2002.167
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 167-174
summary	In the behavior of human cognition, Schank, a cognitive researcher, claims that human frequently rely on past experience to solve new problems. The information and knowledge of well-trained designers was obtained from fundamental training courses in schools, from everyday experience, and importantly from several design cases. Acquiring knowledge by seeing cases is the most important activity in the design process. But, there are no related works from cognitive view to discuss what and how designers see from instances. Thus, this paper attempts to investigate what designers can see as some meaningful elements from instances, what relationships are among elements and knowledge which retrieved from designers’ long-term memory, and how new obtained knowledge influences the design outcomes.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2002.
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
wos	WOS:000340635300028
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ga0230
id	ga0230
authors	Annunziato, Mauro and Pierucci, Piero
year	2002
title	Human-Artificial Ecosystems: Searching for a Language
source	International Conference on Generative Art
summary	The most recent advances of artificial life scientific research are opening up a new frontier: the creation of simulated life environments populated by autonomous agents. In these environments artificial beings can interact, reproduce and evolve [4, 6, 15], and can be seen as laboratories toexplore the emergence of social behaviors like competition, cooperation, relationships and communication [3, 5, 7] . It is still not possible to approach a reasonable simulation of the incredible complexity of human or animal societies, but these environments can be used as a scientific orartistic tools to explore some basic aspects of the evolution [1, 2, 3, 9, 11, 12, 13, 14, 15, 16].
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	ga0236
id	ga0236
authors	Antonini, Riccardo
year	2002
title	Shared, Collective, Generative, Dynamic Virtual Environments - Geneve
source	International Conference on Generative Art
summary	In this project we plan to create an experimental novel medium setup for the study of the “presence” experience in shared, collective, generative, dynamic virtual environments (GENEVEs) in order to study the cross interactions between a given GENEVE and/among its creators/users and to explore the logic of presence in each GENEVE. The new shareable / generative media will try to add personal creativity and social dimension to telefruition of contents. For the European Industry having a leading edge in the technology for hw/sw/contents for shareable novel media is both a strategic asset and a social imperative.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	12d9
authors	Anumba, C.J., Ugwu, O.O., Newnham, L. and Thorpe, A.
year	2002
title	Collaborative design of structures using intelligent agents
source	Automation in Construction 11 (1) (2002) pp. 89-103
summary	The construction industry has a long tradition of collaborative working between the members of a construction project team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design disciplines. To aid these meetings, the information and communications technologies that are currently available have been utilised. These have yielded some success but are hampered by the problems posed by the use of heterogeneous software tools and the lack of effective collaboration tools that are necessary to collapse the time and distance constraints, within which increasingly global design teams work. In particular, there are very few tools available to support distributed asynchronous collaboration. Distributed artificial intelligence, which is commonly implemented in the form of intelligent agents, offers considerable potential for the development of such tools. This paper examines some of the issues associated with the use of distributed artificial intelligence systems within the construction industry. It describes the potential for the use of agent technology in collaborative design and then goes on to present the key features of an agent-based system for the collaborative design of portal frame structures. An example is presented to demonstrate the working and benefits of the prototype system, which makes a significant contribution by allowing for peer to peer negotiation between the design agents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ac57
authors	Bae, H.A., Kim, M.R., Shin, S.Y., Kim, H.A. and Yoon, C.S.
year	2002
title	An Application of Photogrammetry Measuring Technology to Parametric Modeling of Korean Traditional Wooden Structure
doi	https://doi.org/10.52842/conf.caadria.2002.139
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 139-146
summary	To construct a 3D parametric model of Korean traditional wooden structure, the fundamental process is to obtain the dimensions of each building. An application of measuring high technology helps this process accomplished more efficiently. However PhotoModeler is a photogrammetric program to measure the dimension using photographs. The information derived from PhotoModeler is used to clarify the design rule inherent in a Korean traditional mansion type building - UnHyun Palace.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2044
authors	Barros, Diana Rodríguez and Mandagaran, María
year	2002
title	Sistemas Hipermediales y descentramiento temático [Hyper medial Systems and thematic decentralized]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 190-192
summary	Hipermedia lead to a non- linear organization of information, where the user decides the path to follow and the relations among the different information blocks. They constitute starting points for establishing both social and sin gu lar “sense genealogies”. Sense production by means of mutimedia access and the resignifying of information correspond, within the Theory of Science Didactics, to the concept of thematic decentering. This concept refers to fl exibility and transference modes, opposed toseg men ta tion and which enable to explore, approach and relate different topics and complexities. It is supposed to generate more cultivated individuals by broadly linking science, technology and art. Within this theoretic frame work, the work presents the de vel op ment of a hipermedium on the Villa Victoria Cultural Center, which aims at a didactic treat ment of cultural spaces as object of knowl edge.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
doi	https://doi.org/10.52842/conf.acadia.2002.097
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: