Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2007_026
id	ascaad2007_026
authors	Sarji, E.A.; A. Rafi and R. Mat Rani
year	2007
title	Preparing a multimedia-based gallery for institute of higher learning: A case study of Malaysian experience
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 305-316
summary	While the majority of medium and small sized institutions still rely on their physical or traditional content, it has been observed a pre-disposition usually by major, recently founded or contemporary art institutions to display net-based projects (Buiani, 2001) and to some extent established as a permanent display. This changing of exhibitions has penetrated in many Asian galleries and as a result many schools trying to re-position and present in such a way that it can be easily changed and adapted to host multimedia, Internet, interactive and computer-based content. This funded research project investigates the functions of gallery in IHL in Malaysia. A triangulated study was conducted to understand the potentials and issues faced by galleries in public and private universities focusing on design schools that include art and design, and architecture. This research starts with the understanding of gallery design theories. It is then followed by a qualitative method survey to all galleries in the IHL. This research continues with an in depth study and a survey on Electronic Gallery (e-Gallery), Faculty of Creative Multimedia (FCM), Multimedia University (MMU) to understand between the theories and design ideas. A set of questionnaires was developed based on Mathews (1991) and Stewart’s (2002) principles and guidelines on research methods and distributed to visitors throughout a period of time consisting of open-ended, close-ended, Likert Summated Rating Scale and Multiple-choice. This involved a controlled group of visitors comprises students and staff of the faculty. The results of these studies will be used as a reference to further conduct a wider scope of galleries worldwide towards designing a multimedia-based gallery framework for Institute of Higher Learning.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ga0235
id	ga0235
authors	Turner, A.
year	2002
title	Ecomorphic Dialogues
source	International Conference on Generative Art
summary	The biological concept of ecomorphology examines the morphology of the organism in relation to the environment it inhabits. However, the organism itself is an active agent that shapes the environment that in turn shapes it. The two are linked through what autopoietic theory calls structural coupling, and thus the environment itself evolves as an ecomorphic entity. This short paper discusses modelling the process of ecomorphic evolution of an art gallery, which is built around the natural interaction, or hermeneutic dialogue, between people and artworks within it. The natural interactions from the point of view of the person are those based on active perception of the environment, that is, based solely on possiblities that the environment affords to the person. In the model presented here, the possibilities of the gallery are to view the artwork on display, and agents with vision act out the part of the people. However, the artwork itself is engaged in a game in which it tries to place itself in popular rooms within the gallery, moving from location to location to achieve this. Around this visually coupled interaction between viewer and artwork, the walls of the gallery are formed and reformed according to the location of the players, in order to create a constantly evolving space in which the game is played: the ecomorphic dialogue of artwork and art viewer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	caadria2006_589
id	caadria2006_589
authors	YU-NAN YEH
year	2006
title	FREEDOM OF FORM: THE ORIENTAL CALLIGRAPHY AND AESTHETICS IN DIGITAL FABRICATION
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 589-591
doi	https://doi.org/10.52842/conf.caadria.2006.x.v6f
summary	Computer-Aided Design (CAD) / Computer-Aided Manufacturing (CAM) related research has been discussed since the 1960's (Ryder, G. et al, 2002, Mark Burry, 2002). Indeed, both Frank O. Gehry and Toyo Ito utilized CAD/CAM to create rich architectural form and in so doing gave birth to a new type of aesthetics. The visualization and liberalization of form space is the single most important characteristic attributable to the use of computers as a design tool. By the 1980's, Laser cutting and Rapid Prototyping techniques developed from CAM, became important new digital tools when researchers and designers discussed the development of form in architecture.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ga0212
id	ga0212
authors	Colakoglu, Birgul
year	2002
title	An Informal Shape Grammars for Interpolations of Traditional Bosnian Hayat Houses in a Contemporary Context
source	International Conference on Generative Art
summary	This paper explores the use of an informal shape grammar method for Hayat house form interpolations. Interpolations are new house forms, which carry stylistic characteristics of an existing design language but are inserted into a context, which responds to a contemporary life style. The study is based on a corpus of eight Hayat houses designed in the classic Ottoman style in the 18th and 19th century in Sarajevo. The hayat is a large shaded gallery open to the garden. It occupies the most important place in the composition of the plan. In this study, a form-driven design strategy is applied. The emphasis is given to new house form generation. The generation of a new house form within the grammar proceeds in four steps: (1) Primitive hayat house generation, (2) sub-house generation, (3) House variations, (4) House development. The shape rules used in the process of hayat house interpolations are mostly informal and explain in general terms how certain parts of the form are modified.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	5830
authors	Saunders, Rob and Gero, John S.
year	2002
title	Curious Agents and Situated Design Evaluations
source	Gero JS and Brazier FMT (eds) (2002) Agents in Design 2002. Key Centre of Design Computing and Cognition, University of Sydney, pp. 133-149
summary	This paper presents a possible future direction for agentbased simulation using complex agents that can learn from experience and report their individual evaluations. Adding learning to the agent model permits the simulation of potentially important agent behaviour such as curiosity. The agents can then report evaluations of a design that are situated in their individual experience, such as their level of interest as they explore. The paper describes the architecture of curious agents that can be used in the situated evaluation of designs. It then describes an example of the application of such curious agents in the evaluation of the curating of an exhibition in an art gallery.
series	other
email
last changed	2003/05/10 10:16

_id	2c14
authors	Sharji, E.A., Hussain, H. and Ahmad, R.E.
year	2002
title	Electronic Gallery : Case Study of A New Design Approach in Malaysia
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 370-373
doi	https://doi.org/10.52842/conf.ecaade.2002.370
summary	A building comprises of more than the skin and the structural works. It is the soul that comes in the form of SPACE that is intriguing and provokes the mind. To be able to experience a building relies heavily on the spatial concept and internal lay out. How one is captured right from entering the entrance and through the layering of space, of horizontal and vertical planes and finally the euphoria, or depressed feeling that concludes the tour depending on the feeling intended (Miller, 1995). The common norm at present celebrates the outer skin and grandeur of facades. Not many include the hidden grids and fragmentation that can lead to a surprisingly good form AND space. Thus a number of them fail, in the sense of a sensuous building. ‘The circulation path can be conceived as the perceptual thread that links the spaces of a building or any series of interior or exterior spaces, together. Since we move in TIME, through SEQUENCE of SPACES, we experience a space in relation to where we’ve been, and where we anticipate going’ (Ching, 1979). This research intends to study and analyze the unconventional electronic gallery or ‘e-gallery’ as a versatile hybrid container. The focus of the research will be on documenting spaces in the e-gallery, bringing to light the unlimited possibilities that can take place in such a space.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	ba50
authors	Achten, Henri and Jessurun, Joran
year	2002
title	An Agent Framework for Recognition of Graphic Units in Drawings
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 246-253
doi	https://doi.org/10.52842/conf.ecaade.2002.246
summary	Architects use graphic conventions in their drawings that have meaningful content to the design task. In previous work, such well-defined sets of graphic entities have been identified and defined. These sets are called graphic units. In this paper, we discuss how graphic unit recognition in drawings can take place using a multi-agent systems approach. This approach seems promising as singular agents may specialize in graphic unit-recognition, and multi-agent systems can address problems of ambiguity through negotiation mechanisms. We present an agent framework for this purpose, how it connects to the theory of graphic units, and how agents for recognizing graphic units are defined. The paper ends with a discussion of current findings and future work.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
doi	https://doi.org/10.52842/conf.ecaade.2002.386
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
doi	https://doi.org/10.52842/conf.caadria.2002.151
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssup0202
id	ddssup0202
authors	Antoni, J.P.
year	2002
title	Urban Sprawl Modelling: Combining Models to Make Decision
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban sprawl is frequently associated with the idea of an unsuitable development, leading to increasing economic, social and environmental problems. Moreover, its control is difficult because multiple patterns (concerning numerous traditional urban planning fields) overlap. In order to understand the sprawl process and to manage its consequences, it must be simplified. The construction of a decision making tool appears then interesting. The GIS-based tool presented here is being developed incollaboration between the urban planning agency of Belfort and the laboratory of geography of Strasbourg. It requires three steps: 1. quantification of the sprawl (how much areas are involved in theurban sprawl process?); 2. location of the sprawl (where are the areas defined in the first step?); 3. differentiation of the sprawl (what are the areas located in the second step?). Of course, the successionof the three stages makes the use of the complete model more complex. So, a global ergonomic user interface is being developed within the GIS, allowing to modify each parameter and to play easily numerous simulations.
series	DDSS
last changed	2003/11/21 15:15

_id	fce1
authors	Anumba, C.J. and Ruikar, K.
year	2002
title	Electronic commerce in construction-trends and prospects
source	Automation in Construction 11 (3) (2002) pp. 265-275
summary	There is growing interest in the conduct of business transactions by electronic means through the Internet and/or dedicated networks; this is often referred to as electronic commerce. This paper reviews developments in electronic commerce, with a particular focus on its applicability and uptake within the construction industry. Electronic commerce business models are reviewed and the enablers and barriers to their uptake in the construction sector presented. The paper concludes with future trends in electronic commerce and the need for construction organisations to make the necessary investments that will enable them to take advantage of these.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	12d9
authors	Anumba, C.J., Ugwu, O.O., Newnham, L. and Thorpe, A.
year	2002
title	Collaborative design of structures using intelligent agents
source	Automation in Construction 11 (1) (2002) pp. 89-103
summary	The construction industry has a long tradition of collaborative working between the members of a construction project team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design disciplines. To aid these meetings, the information and communications technologies that are currently available have been utilised. These have yielded some success but are hampered by the problems posed by the use of heterogeneous software tools and the lack of effective collaboration tools that are necessary to collapse the time and distance constraints, within which increasingly global design teams work. In particular, there are very few tools available to support distributed asynchronous collaboration. Distributed artificial intelligence, which is commonly implemented in the form of intelligent agents, offers considerable potential for the development of such tools. This paper examines some of the issues associated with the use of distributed artificial intelligence systems within the construction industry. It describes the potential for the use of agent technology in collaborative design and then goes on to present the key features of an agent-based system for the collaborative design of portal frame structures. An example is presented to demonstrate the working and benefits of the prototype system, which makes a significant contribution by allowing for peer to peer negotiation between the design agents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

For more results click below: