Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 356

Reformat results as: short short into frame detailed detailed into frame

_id	24eaea2001
id	24eaea2001
authors	Ohno, R., Katayama, M., Komatsuzaki, T. and Soeda, M.
year	2002
title	Development of a Visual Simulation System Synchronized with Walking Motion - An application for a study of distance perception
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	Conventional visual simulators allow observers to move in the simulated space by using a mouse or a joy-stick without the kinesthetic feeling of motion. However, the link between visual image and body motion is important to perceive the environment, especially when people are walking. In this paper, a visual simulation system was designed to synchronize the subject's walking motion on a treadmill with the video image shown on a HMD. In order to detect the walking motion, sensors were attached to both subject’s ankles. According to the detected motion, the treadmill rotates and a CCD camera moves in a model space. Because of the sensors’ low sensitivity and the time lag between the detected motion and treadmill rotation, the subjects couldn’t walk smoothly. Therefore, the walking speed which synchronizes with the video image was kept constant for each subject and the experimenter started up and stopped the simulator. The validity of this simulation system was examined by comparing the accuracy of distance estimation using the new simulator with that using the conventional system without walking motion. The “distance reproduction” method was applied to measure the perceived distance: subjects walked 25 meter in a real setting without being told the distance, and were asked to move the same distance in different conditions. Since the distance estimation became accurate in the condition with the walking motion, the validity of this simulator was secured. The following experiment was intended to investigate the influence of physical environmental features on perceived distance by using the simulation system. We operated some features using a scale model of a route and examined their influences. Subjects were asked to "walk" through a path consisted of two spaces with different physical features, and to respond by showing the proportion of the length of those two spaces. The result revealed that the distance of a narrower and lower ceiling path where people perceive clearer line perspective and faster optical flow tends to be perceived longer.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ecaade03_373_117_wittkopf
id	ecaade03_373_117_wittkopf
authors	Wittkopf, Stephen K. and Foo, E-Jin
year	2003
title	Discussing Image-Based Modeling Technology for 3D Digital Archival of Physical Architecture Models
doi	https://doi.org/10.52842/conf.ecaade.2003.373
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 373-380
summary	Besides drawings, physical models are important forms of representation commonly used for architectural design. They can serve as a useful resource for teaching and research, provided there is a proper archiving system that allows easy retrieval. Architectural models in 3D digital format seem to be able to overcome the limitation of physical constraints – they can be easily accessed anytime and anywhere over the Internet. The most common way of 3D model documentation is through geometric-based 3D CAD software. Image-based modeling (IM) allows the 3D digital model to be created from photographic images. Debevec (1998) investigated the hybrid geometry- and image-based approach whilst Tsou (2002) and Hawkins (2001) focused on the application of IM for GIS and digitizing cultural artifacts respectively. This paper aims to compare physical models and their IM counterparts in terms of communication of vital architectural information. Experiments were conducted to evaluate the extent the IM model resembled the physical predecessor in terms of its geometry and visual appearance qualities/faithfulness. A survey was subsequently carried out to compare their performance in terms of the communication of vital architectural information about building designs to the observers. The tabulated results were then examined to help understand the opportunities and weakness of IM for 3D archival of physical architecture models
keywords	Image-based modeling, architecture model, digital archiving, design resource
series	eCAADe
email
more	http://www.arch.nus.edu.sg/akiskw
last changed	2022/06/07 07:57

_id	2f17
authors	Dokonal, W., Martens, B. and Plösch, R.
year	2002
title	New Expectations: City Modeling in the Internet Age
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 97-100
summary	The first part of this paper tries to give an overview over the different aspects of city modeling. After a short history on city models the paper starts with a categorization of the different “types” of city models. We try to explain the various aspects involved in the creation of a city model and the problem of maintaining a city model. Then the paper shows the example of two computer models of parts of the same European city which have been created in two different ways. The first version of this computer model tries to use as many automatic or semi automatic procedures as possible to create the model. In the paper examples of these differentprocedures are given - from the automatic creation of the buildings itself, its roofs, and the surrounding terrain to the automatic cleaning of texture photos of the façade. The second version shows a model, which has been done with just a few automatic procedures and a lot of human effort (mainly students). The paper describes the limitation of both techniques and tries to give an outlook towards the combination of these methods. We will also show the importance of internet techniques in the use and presentation of computer city models.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	3071
authors	Kuenstle, Michael W.
year	2002
title	Escarpment Study in a Virtual Flow Environment A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations [Escarpment Study in a Virtual Flow Environment. A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 167-171
summary	This paper documents the progress of research to investigate the integration of 3-dimensional computational modeling techniques into wind mitigation analysis and design for building structures located in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application case study for asimulated “3-second gust” hurricane force wind flow over a low rectangular building located in a coastal region of south Florida. The case study project models the wind flow behavior and pressure distribution over the building structure when situated in three varying conditions within a single terrain exposure category. The simulations include three-dimensional modeling of the building type constructed (1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and (3) ongradedownwind of an escarpment. The techniques and parameters for development of the simulations are discussed and some preliminary interpretations of the results are evaluated by comparing their predictions to existing experimental and analytical data, with special attention paid to the numerical methods outlined in the American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ASCE 7-98.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	79b4
authors	Kuenstle, Michael W.
year	2002
title	Flow Structure Environment Simulation - A Comparative Analysis of Wind Flow Phenomena and Building Structure Interaction
doi	https://doi.org/10.52842/conf.ecaade.2002.564
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 564-568
summary	This paper documents the progress of research to investigate the integration of computational modeling techniques into wind mitigation analysis and design for building structures located in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application case study for a simulated “3-second gust” wind flow over a low rectangular building located in a coastal region. The case study project models the wind flow behavior and pressure distribution over the building structure when situated in three varying conditions within a single terrain exposure category. The simulations include three-dimensional modeling of the building type constructed (1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and (3) on-grade downwind of an escarpment. The techniques and parameters for development of the simulations are discussed and some preliminary interpretations of the results are evaluated by comparing their predictions to existing experimental and analytical data.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8780
authors	Abdelhameed, W., Ozel, F., Addelatiff, M. and Daef, A.
year	2002
title	Assessment of the Impact of Digital-Manual Media Types on the Basic Design Capabilities of Architects: A Proposed Framework and Directive Measures
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 275-276
summary	The research attempts to defi ne and classify the design capabilities of architects into a basic framework. This defi nition will be useful in understanding and determining the types and nature of impact introduced by digital and manual media used during architecturaldesign process. The research consists of three parts. The First part reviews the main stages, tasks and activities of the architectural design process. The second part builds the proposed framework of design capabilities relating them to the specifi c tasks and activities conductedby the architect along the design process. The third part proposes some useful measures as to how to make use of the proposed framework in assessing the impact of media on the design capabilities of architects.
series	SIGRADI
last changed	2016/03/10 09:47

_id	765f
authors	Adam, Holger
year	2002
title	Reinterpretation or replacement? The effects of the information and communication technologies on urban space
source	CORP 2002, Vienna, pp. 345-349
summary	The timid question “Virtual spaces or real places?” forms the core of many debates within the spatial sciences addressing theconsequences of the rapid development of information and communication technologies1 on existing spatial structures. So far several opinions rival each other for the interpretation of current and the prediction of future spatial developments. The spacelessness ofcomputer networks and the possibility to transmit data in real-time have lead visionaries to predict a far-reaching devaluation of timeand space, so questioning the future importance of traditional spatial structures: The “annihilation of distance and time constraints [incomputer networks] could undermine the very rationale for the existence of the city by dissolving the need for physical proximity”(Graham and Marvin 1996: 318). The disappearance of the city into the net, therefore, seems to become a distinct possibility.
series	other
email
more	www.corp.at
last changed	2003/11/21 15:15

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	6b70
authors	Af Klercker, Jonas and Pittioni, Gernot
year	2002
title	Architect and Structural Engineer in interactive design
doi	https://doi.org/10.52842/conf.ecaade.2002.386
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 386-389
summary	We are convinced that an interactive design process involving engineers and architects will create values to a project. Looking back there have been some obstacles, like a week’s time for exchange of drawings with traditional postal services; manual calculation methods, which could not be spoiled on loose grounds like architect’s sketches; different media – architect’s drawings and engineer’s numbers in tables; attitudes and traditional roles, implemented already in education. Today most of these obstacles can be overcome and we have made a test. We have used ArchiCad by Graphisoft and FEM-design by SKANSKA IT Solutions to test to make an interactive design. Our conclusions are that exchange of information, drawings and other documents is more or less routine in praxis, and it works almost instantly. Computers make calculation faster and easier for the engineer. Though we would wish to have software which manages to do more rapid estimations. Even simulations such as of loads on a structure are practically possible. By using model based CAD the data can be used for transferring quantities for calculations as well as visualization of the design as a platform for collaborate analysis. The technique is developed and usable but to gain acceptance and make use of it is also a matter of attitudes and of application activities in education.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	461b
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2002
title	The Role of Advanced VR Interfaces in Knowledge Management and Their Relevance to CAD
doi	https://doi.org/10.52842/conf.caadria.2002.277
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 277-284
summary	This paper introduces knowledge management and computer aided visualisation as a key in establishing both valuation and value creation capabilities in the enterprise where dissemination of knowledge and effective sharing of information through collaboration spur creativity and stimulate business practices. The paper draws an original approach for the design and development of a universal information/knowledge visualisation tool and outlines the mechanics that enable the working prototype that focuses on CAD.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2002.
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	caadria2002_000
id	caadria2002_000
authors	Ahmad Rafi, Mohamed Eshaq; Khong, Chee Weng; Neo, Mai; Neo, Ken TK; Syed, Ahmad; Sharifah, Nur Antasha (eds.)
year	2002
title	CAADRIA 2002
doi	https://doi.org/10.52842/conf.caadria.2002
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
series	CAADRIA
last changed	2022/06/07 07:49

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	899b
authors	Alvarado, R.G., Abufarde, F.B., Moreno, P.R. and Bravo, M.P.
year	2002
title	Modelación de Actividades [Modeling of Activities]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 151-154
summary	Despite increasing interest in the functionality and humanization of architecture, scarcely the occupation of buildings are studied and it lacks methods to represent activities in the spaces. By this reason, it proposes a system such integrates simulation of processes and virtual modeling software, to program the behavior of tri-dimensional characters based on the probabilistic evolution of events, testing this approach in the study of emergency services of hospitals. It describes the procedure developed and reflections about temporal representation, demonstrating that modeling of activities allows to suggest functional and spatial improvements.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
wos	WOS:000340635300028
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ga0230
id	ga0230
authors	Annunziato, Mauro and Pierucci, Piero
year	2002
title	Human-Artificial Ecosystems: Searching for a Language
source	International Conference on Generative Art
summary	The most recent advances of artificial life scientific research are opening up a new frontier: the creation of simulated life environments populated by autonomous agents. In these environments artificial beings can interact, reproduce and evolve [4, 6, 15], and can be seen as laboratories toexplore the emergence of social behaviors like competition, cooperation, relationships and communication [3, 5, 7] . It is still not possible to approach a reasonable simulation of the incredible complexity of human or animal societies, but these environments can be used as a scientific orartistic tools to explore some basic aspects of the evolution [1, 2, 3, 9, 11, 12, 13, 14, 15, 16].
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	ga0236
id	ga0236
authors	Antonini, Riccardo
year	2002
title	Shared, Collective, Generative, Dynamic Virtual Environments - Geneve
source	International Conference on Generative Art
summary	In this project we plan to create an experimental novel medium setup for the study of the “presence” experience in shared, collective, generative, dynamic virtual environments (GENEVEs) in order to study the cross interactions between a given GENEVE and/among its creators/users and to explore the logic of presence in each GENEVE. The new shareable / generative media will try to add personal creativity and social dimension to telefruition of contents. For the European Industry having a leading edge in the technology for hw/sw/contents for shareable novel media is both a strategic asset and a social imperative.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	fce1
authors	Anumba, C.J. and Ruikar, K.
year	2002
title	Electronic commerce in construction-trends and prospects
source	Automation in Construction 11 (3) (2002) pp. 265-275
summary	There is growing interest in the conduct of business transactions by electronic means through the Internet and/or dedicated networks; this is often referred to as electronic commerce. This paper reviews developments in electronic commerce, with a particular focus on its applicability and uptake within the construction industry. Electronic commerce business models are reviewed and the enablers and barriers to their uptake in the construction sector presented. The paper concludes with future trends in electronic commerce and the need for construction organisations to make the necessary investments that will enable them to take advantage of these.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: