Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	f899
authors	Shih, Naai-Jung and Wang, Pin-Hung
year	2002
title	The Application of Reverse Engineering for Building Construction Management
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 338-341
doi	https://doi.org/10.52842/conf.ecaade.2002.338
summary	This research utilizes a 3D laser scanner to retrieve 3D digital information of a building construction site for the management purpose. The concept of reverse engineering is applied as a method in revealing potential problems in building construction process through the analysis of 3D data. This study presents construction images, scanned point-cloud sets, and output rapid prototyping (RP) models as exemplification.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
doi	https://doi.org/10.52842/conf.acadia.2002.097
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	4544
authors	Morozumi, M., Shimokawa, Y. and Homma, R.
year	2002
title	Schematic design system for flexible and multi-aspect design thinking
source	Automation in Construction 11 (2) (2002) pp. 147-159
summary	A designer-friendly CAD for a schematic design is one of the important topics of CAD studies. There were attractive preceding studies aiming to develop a CAD that intended to enable designers to have flexible design thinking and interactively manipulate representation models. This paper has the same goals of study, but focuses on the needs to support flexible and multi-aspect design thinking. Though designers normally hope to elaborate on their ideas using separate sets of representation models suitable for respective studies, a present CAD that is designed to build a single set 3D model, has limited its ability as a tool for a schematic design. Assuming this as the base concept, authors have studied to develop a prototype of a schematic design system, customizing AutoCAD R14J: Schematic Design System '98 (SDS'98). It has convenient utilities both for building separate sets of representation models and for integrating and reconciling those models to build a single consolidate model. This paper discusses the common procedures of schematic design studies, necessary functional features for SDS, a case study of the system use, and finally, the advantages and the disadvantages of the proposed system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ecaade03_373_117_wittkopf
id	ecaade03_373_117_wittkopf
authors	Wittkopf, Stephen K. and Foo, E-Jin
year	2003
title	Discussing Image-Based Modeling Technology for 3D Digital Archival of Physical Architecture Models
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 373-380
doi	https://doi.org/10.52842/conf.ecaade.2003.373
summary	Besides drawings, physical models are important forms of representation commonly used for architectural design. They can serve as a useful resource for teaching and research, provided there is a proper archiving system that allows easy retrieval. Architectural models in 3D digital format seem to be able to overcome the limitation of physical constraints – they can be easily accessed anytime and anywhere over the Internet. The most common way of 3D model documentation is through geometric-based 3D CAD software. Image-based modeling (IM) allows the 3D digital model to be created from photographic images. Debevec (1998) investigated the hybrid geometry- and image-based approach whilst Tsou (2002) and Hawkins (2001) focused on the application of IM for GIS and digitizing cultural artifacts respectively. This paper aims to compare physical models and their IM counterparts in terms of communication of vital architectural information. Experiments were conducted to evaluate the extent the IM model resembled the physical predecessor in terms of its geometry and visual appearance qualities/faithfulness. A survey was subsequently carried out to compare their performance in terms of the communication of vital architectural information about building designs to the observers. The tabulated results were then examined to help understand the opportunities and weakness of IM for 3D archival of physical architecture models
keywords	Image-based modeling, architecture model, digital archiving, design resource
series	eCAADe
email
more	http://www.arch.nus.edu.sg/akiskw
last changed	2022/06/07 07:57

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	f321
authors	Ataman, Osman and Bermudez, Julio
year	2002
title	ACADIA'99: media effect on architectural design
source	Automation in Construction 11 (2) (2002) pp. 131-134
summary	The idea of this conference arose from various discussions between us in various different places.We decided to put a proposal together for bothpositions—Technical Chairs and Site Organizers. This was unprecedented and we were anxious. We really wanted to run this conference and run it in Salt Lake City. Our theme AMedia and Design ProcessB was a timely topic and both of us were working on and around it. We thought it was interesting and challenging to define the terms and to establish the relationships between architecture, representation andmedia. In fact, all throughout the history of architecture, representation, media and design have beenrecognized to have a close relationship. Interpretations as to what exactly this relationship is or meanshave been subject to debate, disagreement and changealong the ages. Whereas much has been said about the dialectics between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues, that we have enough context to be able to see and address the relationship between media and human activities with some degreeof perspective.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ac57
authors	Bae, H.A., Kim, M.R., Shin, S.Y., Kim, H.A. and Yoon, C.S.
year	2002
title	An Application of Photogrammetry Measuring Technology to Parametric Modeling of Korean Traditional Wooden Structure
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 139-146
doi	https://doi.org/10.52842/conf.caadria.2002.139
summary	To construct a 3D parametric model of Korean traditional wooden structure, the fundamental process is to obtain the dimensions of each building. An application of measuring high technology helps this process accomplished more efficiently. However PhotoModeler is a photogrammetric program to measure the dimension using photographs. The information derived from PhotoModeler is used to clarify the design rule inherent in a Korean traditional mansion type building - UnHyun Palace.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	1ac6
authors	Cheng, Min-Yuan and Chen, Jiann-Chyun
year	2001
title	Integrating barcode and GIS for monitoring construction progress
source	Automation in Construction 11 (1) (2002) pp. 23-33
summary	This study focuses on developing an automated schedule monitoring system for precast building construction. Erection of prefabricated structural components is the major critical activity for precast building construction. An efficient lifting schedule and control plan can significantly reduce construction conflicts and project delay. In this research, the system ArcSched was developed to assist engineers in controlling and monitoring the erection process in a real time basis. ArcSched is composed of a Geographic Information System (GIS) integrated with a database management system. Through systematic monitoring of the construction process and representation of the erection progress in graphics and colors, the scheduled components for erection are repetitively tracked and well controlled to implement the lifting schedule as planned.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2d54
authors	Clayton, M.J., Warden, R.B. and Parker, Th.W.
year	2002
title	Virtual construction of architecture using 3D CAD and simulation
source	Automation in Construction 11 (2) (2002) pp. 227-235
summary	3D modeling and computer simulations provide new ways for architecture students to study the relationship between the design and construction of buildings. Digital media help to integrate and expand the content of courses in drafting, construction and design. This paper describes computer-based exercises that intensify the student's experience of construction in several courses from sophomore to senior level. The courses integrate content from drafting and design communication, construction, CAD, and design.Several techniques are used to strengthen students' awareness and ability in construction. These include: Virtual design–build projects in which students construct 3D CAD models that include all elements that are used in construction. Virtual office in which several students must collaborate under the supervision of a student acting as project architect to create a 3D CAD model and design development documents. Virtual sub-contracting in which each student builds a trade specific 3D CAD model of a building and all of the trade specific models must be combined into a single model. Construction simulations (4D CAD) in which students build 3D CAD models showing all components and then animate them to illustrate the assembly process. Cost estimating using spreadsheets. These techniques are applied and reapplied at several points in the curriculum in both technical laboratory courses and design studios. This paper compares virtual construction methods to physical design–build projects and provides our pedagogical arguments for the use of digital media for understanding construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	b74f
authors	Dijkstra, Jan and Timmermans, Harry
year	2002
title	Towards a multi-agent model for visualizing simulated user behavior to support the assessment of design performance
source	Automation in Construction 11 (2) (2002) pp. 135-145
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ddssar0211
id	ddssar0211
authors	Fröst, Peter
year	2002
title	Interactive Tools for Collaborative Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today’s rapidly changing society is continuously developing towards an increased demand for multistakeholder knowledge and influence in the architectural planning and design process. Accordingly, we are working with developing and setting up a partner engaged collaborative design process. It includes active collaboration between users, external partners and designers, and visualizations in conceptual design and scenario building. My research is focusing on integrating visualization technology in theseprocesses by application of digital tools. We have developed a working prototype for an interactive design tool. The prototype is an extremely “easy to use” digital modeling tool called “ForeSite Designer.” With this tool one builds one’s own spatial environment with elements on a 2D surface.With one command the 2D layout is exported to a lit-up 3D/Virtual Reality world in the computer game “Half-Life”. ForeSite Designer has lately been used in a series of workshops together with external users. In these processes ForeSite Designer has played a crucial role as an arena of building spatially arranged concepts of future environments. The results show that it works, and, importantly, promotes a collaborative engagement among the users.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0204
id	ga0204
authors	García-Salgado, Tomás
year	2002
title	Modular Perspective as a Method for Generative Design
source	International Conference on Generative Art
summary	Apparently there are many methods for perspective but if we categorize them there are just a few. Some criterions of classification relate perspective to the so-called 1-point, 2-point and 3-point methods, others —more formally— to projective geometry, descriptive geometry or vectorial algebra. Of course we cannot forget to mention the early treatises on perspective such as Alberti’s Della Pittura or Piero’s De Prospectiva Pingendi, which escapes any classification. Our aim on this article is not precisely to solve the classification problem rather we propose a new comprehensive method for perspective, capable of 3D representation without using vanishing points.The modular perspective method allows us to work in true three-dimensionality on the perspective plane (PPl). We will explain how to measure directly on the PPl the triad coordinates (x, y, p) of a given point into the visual space, and how to play with the symmetrical planes X and Y (SPl X/Y) in order to generate or recover data. Finally we will explain how to employ modular perspective in generative design formal-process through an example of application.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	24d3
authors	Ham, J.J., Anson, S., Datta, S. and Skates, H.
year	2002
title	The Construction Primer in Case-Based E-ducation: The Deakin Woolstores Case Study
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 130-133
doi	https://doi.org/10.52842/conf.ecaade.2002.130
summary	This paper outlines the use of an online multimedia case study of the Deakin University Woolstores campus in design and construction learning. The case study, in its pilot form, serves three purposes: as a case-based primer for the study of design and construction technology, as a structured case-study container for the addition of student digital construction projects and to benchmark student digital construction projects. The case study utilizes 3D CAD models and web-based multimedia in concert with physical connection with the actual building to build wholistic understandings of the transition of an idea to a constructed reality.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddssar0223
id	ddssar0223
authors	Mahdavi, A, Suter G. and Ries, R.
year	2002
title	A Representation Scheme for Integrated Building Performance Analysis
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents a representational scheme for integrated building performance analysis. The underlying research work was motivated by the need for seamless exchange of structured design information.A comprehensive and widely accepted industry standard suitable for exchanging design information among the various AEC (Architecture/Engineering/Construction) applications has yet to emerge. As a contribution to this on-going discussion, we present a specific approach to the integration problem in building product modeling. This approach can be viewed as pragmatic or bottom-up in the sense that itwas driven by the informational needs of related individual domains (particularly in the early stages of design) rather than by a quest for a universally applicable solution. In this paper, we describe a schemawhich emerged from the SEMPER effort, a multi-year project aimed at supporting detailed performance analysis for early design in the energy, life-cycle analysis, lighting, and thermal comfort domains. Thisschema relies on a representational division of labor between a shared building model, and various disciplinary (domain) models. Specifically, we present a documentation of the shared object model together with disciplinary models for the energy, light, acoustics, and life-cyle assessment domain.
keywords	building product models, building performance, integration
series	DDSS
last changed	2003/08/07 16:36

_id	bff9
authors	Proctor, George (Ed.)
year	2002
title	ACADIA 2002 [Conference Proceedings]
source	Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X / Pomona (California) 24-27 October 2002, 446 p.
doi	https://doi.org/10.52842/conf.acadia.2002
summary	The 2002 ACADIA conference finds digital tec_nology ubiquitous as the Association for Computer Aided Design in Architecture moves into its third decade. The organization of ACADIA is on the threshold of restating its mission. After 20 years, many of the organization’s initial objectives have been achieved. ACADIA members have been instrumental in the development of design software, and in bringing computers and digital technology into architectural practice and design school curriculum. At first, ACADIAns faced the debate over the appropriateness and utility of digital technology in the disciplines of architecture, planning and building science. Today the use of computers and information technology is widely accepted by architects and CAAD and digital technology have brought profound change to design practice. The debate in ACADIA has long since moved from "should we use this technology" to "how", "for what" and "why". Now that many practitioners, learning institutions and professional organizations have taken up the call, ACADIA must restate its mission, if it wishes to remain “distinct”. This does not mean that the work of ACADIA is complete. Much remains to be done and much more needs to be improved. ACADIA’s Mission Statement places particular focus on “education and the software, hardware and pedagogy involved in education.” And “(t)he organization is also committed to the research and development of computer aides that enhance design creativity, and that aim at contributing to the construction of humane physical environments.” These are the areas that continue to evolve, grow and provide for ACADIA’s continued relevance. The ACADIA 2002 conference theme reflects the state of digital technology’s application to the discipline, as much as it refers to ACADIA’s future. With the general acceptance of digital technology and CAAD, we have arrived at a place where the work of great interest and relevance lies in the space between what is digital and what is analog. The environments of real space and cyberspace have in a very short time become so intertwined that the space between real and virtual (not to be confused with reality and fantasy) is becoming indistinguishable. You cannot eat, travel, use public utilities, bank, shop, vacation or recreate without at the very least coming into contact with or passing through information space. The landscape between these two environments has become a cultural phenomenon for those societies with access to the Internet and information networks. And while the computer and World Wide Web have empowered individuals, the collective impact of the technology holds all the potential and problems that similarly emerged in other technology induced landscapes. Consider this last point in the context of ACADIA’s stated mission to “enhance design creativity while contributing to the construction of humane physical environments.” And you can see why many of the 260 initial submissions to this conference were in the area of design artifacts and design methodology, providing evidence that ACADIA’s mission remains relevant and in accord with the trends of research and professional creative activity.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	63d1
authors	Rapid Prototyping Group Rapid Design and Manufacture Centre (RDM), Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, Bruce
year	2002
title	Rapid design and manufacture tools in architecture
source	Automation in Construction 11 (3) (2002) pp. 279-290
summary	The continuing development of Rapid Prototyping technologies and the introduction of Concept Modelling technologies means that their use is expanding into a greater range of applications. The primary aim of this paper is to give the reader an overview of the current state of the art in Layered Manufacturing (LM) technology and its applicability in the field of architecture. The paper reports on the findings of a benchmarking study, conducted by the Rapid Design and Manufacturing (RDM) Group in Glasgow [G.J. Ryder, A. McGown, W. Ion, G. Green, D. Harrison, B. Wood, Rapid Prototyping Feasibility Report, Rapid Prototyping Group, Glasgow School of Art, 1998.], which identified that the applicability of LM technologies in any application can be governed by a series of critical process and application specific issues. A further survey carried out by the RDM group investigated current model making practice, current 3D CAD use and current use of LM technologies within the field of architecture. The findings are then compared with the capabilities of LM technologies. Future research needs in this area are identified and briefly outlined.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

For more results click below: