Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
wos	WOS:000340635300028
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssup0202
id	ddssup0202
authors	Antoni, J.P.
year	2002
title	Urban Sprawl Modelling: Combining Models to Make Decision
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban sprawl is frequently associated with the idea of an unsuitable development, leading to increasing economic, social and environmental problems. Moreover, its control is difficult because multiple patterns (concerning numerous traditional urban planning fields) overlap. In order to understand the sprawl process and to manage its consequences, it must be simplified. The construction of a decision making tool appears then interesting. The GIS-based tool presented here is being developed incollaboration between the urban planning agency of Belfort and the laboratory of geography of Strasbourg. It requires three steps: 1. quantification of the sprawl (how much areas are involved in theurban sprawl process?); 2. location of the sprawl (where are the areas defined in the first step?); 3. differentiation of the sprawl (what are the areas located in the second step?). Of course, the successionof the three stages makes the use of the complete model more complex. So, a global ergonomic user interface is being developed within the GIS, allowing to modify each parameter and to play easily numerous simulations.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0204
id	ddssar0204
authors	Asanowicz, A.
year	2002
title	Evolution of Media for Early Design Stages
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In this paper the evolution of media used at early design stages will be considered. In traditional methods of searching and presenting the design idea, the basic tool used was the graphic representation. Implementation of new digital techniques in 60s - 70s focused on the mathematical way ofrepresentation. These methods were “not architect friendly” (lack of graphic representation traditionally used by architects). As a result, the development of methods for digital support of form searching was terminated. The computer was used as a tool for drafting. Creative usage of computers for form searching through sketching on the display was extremely difficult. The computer could be described as an “incompatible pencil”. Only in recent years can we see new efforts in this area ofdesign methodology. Thanks to new technical possibilities we have a new chance for changing the process of designing. New kinds of software and hardware let us use the computer not as a pen, but as a medium. In this paper different new ways of form searching will be considered (from very simple method as the scansketches to very complicated ones, such as the generic algorithms). At the end, the influence of new media on the process of design will be presented.
series	DDSS
last changed	2003/11/21 15:16

_id	f321
authors	Ataman, Osman and Bermudez, Julio
year	2002
title	ACADIA'99: media effect on architectural design
source	Automation in Construction 11 (2) (2002) pp. 131-134
summary	The idea of this conference arose from various discussions between us in various different places.We decided to put a proposal together for bothpositions—Technical Chairs and Site Organizers. This was unprecedented and we were anxious. We really wanted to run this conference and run it in Salt Lake City. Our theme AMedia and Design ProcessB was a timely topic and both of us were working on and around it. We thought it was interesting and challenging to define the terms and to establish the relationships between architecture, representation andmedia. In fact, all throughout the history of architecture, representation, media and design have beenrecognized to have a close relationship. Interpretations as to what exactly this relationship is or meanshave been subject to debate, disagreement and changealong the ages. Whereas much has been said about the dialectics between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues, that we have enough context to be able to see and address the relationship between media and human activities with some degreeof perspective.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	ga0206
id	ga0206
authors	Biles, John A.
year	2002
title	GenJam in Transition: from Genetic Jammer to Generative Jammer
source	International Conference on Generative Art
summary	GenJam, short for Genetic Jammer, is an evolutionary computation (EC) based software agent that models a jazz improviser. Recently GenJam has evolved away from its roots as an interactive genetic algorithm toward its current state as an autonomous generative system. GenJam has retained its chromosome-based representations and mappings, its intelligent selection, crossover and mutation operators, and its real-time interactive performance capabilities. However, it no longer needs any explicit representation of fitness, which arguably makes it no longer an EC system. This paper considers GenJam as a generative art system. Generative art produces “unique and non-repeatable events” that express a designer’s generating idea. The designer’s generating idea defines a species of events, represented in a genetic code. In music, these events could be individual notes, melodic phrases, even entire pieces. In GenJam the events are four-measure phrases, or “licks” in the jazz vernacular. The format for the genetic code, then, defines a species space from which unique individual events can be generated. Uniqueness is important in jazz because improvisation must be spontaneous and “new.” Hence, improvisation is tailor-made for the generative art paradigm, and in fact, one could argue that improvisation is, by definition, the purest example of generative art applied to music. In other words, generative music is improvisation, and GenJam is the Generative Jammer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:16

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
doi	https://doi.org/10.52842/conf.ecaade.2002.310
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	63c3
authors	Burdi, Luciana
year	2002
title	Evaluating the Use of a Web-Based Collaborative Interactive Digital Model (CollABITA) in Supporting the Urban Design Approval Process1
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, III.1-III.15
summary	This research, after analyzing the Urban Development Approval Process in its functionalities and methodologies, is showing the key points at which the process might be supported by new computer technologies, and it establishes a web-based Collaborative Interactive Digital Model (CollABITA Model) that relates and facilitates the graphical representation of the urban design process with some elements of the methodological approach. The CollABITA Model will dramatically facilitate the idea of broadening public participation, and indirectly by this, also collaboration. This new web-based support tool, is focusing on how new Informative Computer Technologies can be used in order to have a more co-operative design process. By utilizing the enormous potential of Internet for informing the process, and software for visualizing its products, the Model will provide an effective support, which will be able to deliver information in various forms to the Designers, Developers, Decision Makers, Agencies and the final user (the Citizens). The Model is concerned with the big challenge of supporting the urban design approval process itself, by exploring different kind of visualizations and communication tools, rather than producing a guide for carrying out the design. CollABITA Model is based on the existent framework structure of the extranet tool already available. Then, more then those, CollABITA Model will try to solve, by adding technical and collaborative functionalities, those issues that are characteristics in the urban design process and that are not jet solved by using one of the software .
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/03/29 10:43

_id	fcc3
authors	Castañé, Dora
year	2002
title	Tilcara, de usina a museo: Recuperación y reconstrucción virtual de un significativo patrimonio arquitectónico industrial [Tilcara, from a "Usina" to a Museum: Recovery and Virtual Reconstruction of a Significant Industrial Architectonic Patrimony]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 71-74
summary	This project introduces the recovery, value, and adaptation of a new way of utilizing an important patrimony of industrial arquitecture. The proposal involves the transformation of the hydraulic power plant of Tilcara, located in San Salvador de Jujuy, into a museum. This power plant was built in 1934 with the purpose of providing electrical power to the neighboring towns in the quebrada of Humahuaca, Argentina, and also highlight the scenery and enhance the surrounding architecture. Our goal is to share the findings of the research being conducted that supports the transformation of this turistic area. Additionally, this upholds the idea of blending the conservation of this landmark and the history of Tilcara as a twentieth century patrimony, which has additional archeological sites, such as the pucará and other places from colonial times in the nineteenth and twentieth centuries. An agreement between CEDODAL (Latin America Center of Architecture), in Buenos Aires, and EJESA, in San Salvador de Jujuy, (both located in Argentina) is allowing the recovery of this masterpiece.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	0653
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and Rendering Virtual Architecture by Using Fisheye-Panorama-Based Images and Lightings in HDR-Quality
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 172-174
summary	We use digitally made spherical panoramas as background for vr visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirror-based). For this reason we had the idea to develop the first fisheye-based digitalscanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic-range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) spericalimages together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	a207
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and rendering virtual architecture by using fisheye-panorama-based images and lightings in HDR-quality
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 569-571
doi	https://doi.org/10.52842/conf.ecaade.2002.569
summary	We use digitally made spherical panoramas as background for vr-visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirrorbased). For this reason we had the idea to develop the first fisheye-based digital-scanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic- range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	eCAADe
email
last changed	2022/06/07 07:56

_id	667d
authors	De Souza e Silva, Adriana and Winkler, Fabian
year	2002
title	Database [Database]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 204-207
summary	This paper is a theoretical essay on the installation database. database is an electronic reading device that deals with the inversed functionality of three technologies: a printer, a video-camera and a database. Consequently, it raises issues about the erasure of text, the act of reading in real time (i.e., listening to a printed text), and physical databases. We challenge theidea of databases as non-linear and digital structures, and printers as output devices as well as information recorders. The installation deals with the opposition between presence vs. absence, recording vs. erasing, memory vs. forgetfulness, present vs. continuous time, and reading vs. listening. These concepts are connected with the idea of present time as a time that is always passing by.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	24d3
authors	Ham, J.J., Anson, S., Datta, S. and Skates, H.
year	2002
title	The Construction Primer in Case-Based E-ducation: The Deakin Woolstores Case Study
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 130-133
doi	https://doi.org/10.52842/conf.ecaade.2002.130
summary	This paper outlines the use of an online multimedia case study of the Deakin University Woolstores campus in design and construction learning. The case study, in its pilot form, serves three purposes: as a case-based primer for the study of design and construction technology, as a structured case-study container for the addition of student digital construction projects and to benchmark student digital construction projects. The case study utilizes 3D CAD models and web-based multimedia in concert with physical connection with the actual building to build wholistic understandings of the transition of an idea to a constructed reality.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	7683
authors	Healy, C.G. and Enns, J.T.
year	2002
title	Perception and Painting: A Search for Effective, Engaging Visualizations
source	Institute of Electrical and Electronics Engineers, Journal, March / April
summary	Scientific visualization represents information as images that allow us to explore, discover, analyze, and validate large collections of data. Much of the research in this area is dedicated to the design of effective visualizations that support specific analysis needs. Recently, we have become interested in a new idea: Is a visualization beautiful? Can a visualization be considered a work of art? One might expect answers to these questions to vary widely depending on the individual and their interpretation of what it means to be artistic. We believe that the issues of effectiveness and aesthetics may not be as independent as they might seem at first glance, however. Much can be learned from a study of two related disciplines: human psychophysics, and art theory and history. Perception teaches us how we "see" the world around us. Art history shows us how artistic masters captured our attention by designing works that evoke an emotional response. The common interest in visual attention provides an important bridge between these domains. We are using this bridge to produce visualizations that are both effective and engaging. This article describes our research, and discusses some of the lessons we have learned along the way.
series	journal paper
last changed	2003/04/23 15:50

_id	heylighen__arcc2003
id	Heylighen _ARCC2003
authors	Heylighen , Ann and Seger, Nicole
year	2002
title	An architectural Shift+F7 - Supporting concept development through design cases
source	Lucie Fontein (ed) ARCC/EAAE Conference on Architectural Research Proceedings, School of Architecture, McGill University, Montreal (Canada), May 22-25, 2002, 10 p. (CD Rom)
summary	This paper describes the linking of Idea Space/E3dAD, a system that captures and interprets the architect’s ideas with DYNAMO, a dynamic memory of design cases, to support concept development in architectural design. So far, a major obstacle for the breakthrough of digital case bases like DYNAMO has been the separateness of these tools from the architect’s working environment. Having to leave this environment to consult a case base inconveniently interrupts the design process. The remedy proposed in this paper was inspired by the Shift+F7 shortcut in Ms Word. Just like this shortcut allows authors to look up synonyms in a thesaurus without having to leave the text, linking Idea Space to DYNAMO enables architects to trigger case retrieval ‘en passant’, that is during the very act of designing.
series	other
email
last changed	2004/03/25 17:59

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	96eaea2001
id	96eaea2001
authors	Lengyel, Dominik
year	2002
title	The Presentation is the Project
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	Projects which have not been realised live only in the imagination – at first in the heads of the builders, architects and planners and later in the heads of the general public. Sooner or later, the idea takes on the form of a presentation and here vividness is a decisive factor in the persuasive power of the project itself. Architectural visualisation draws on the experience of photography and painting and employs their instruments and techniques to generate a suggestion of reality. The preliminary planning of a visualisation means working out the essential aspects of a project.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	bb75
authors	Montagu, Arturo F.
year	2002
title	Urbamedia Desarrollo de una base de datos de fragmentos urbanos de ciudades argentinas y latinoamericanas utilizando tecnología digital “VRML” (Virtual Reality Modelling Language) [“Urbamedia” Database Development of urban fragments of Argentinean and Latin cities utilizing the digital technology of VRML (Virtual Reality Modeling Language)]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 112-115
summary	The proposal of “Urbamedia” is to undertake the development of a 3D virtual and interactive model of an historical area of the city of Buenos Aires. The selected zone is the “Mayo Avenue” including the “Mayo Square”; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting and experimental model of the “Mayo Square” that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. We are also looking to include histórical areas of three cities (Mar del Plata, Rosario and Santa Fe) and eventually other cities from Latin América. Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulationsof the environmental parameters.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	8585
authors	Rügemer, Jörg
year	2002
title	From Digital to Real Theoretical-digital architectural concepts and the realization of complex spatial forms
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 194-200
doi	https://doi.org/10.52842/conf.ecaade.2002.194
summary	To summarize former experiences of design seminars of the past years, the paper describes how new thinking and development structures within a design process, in conjunction with digital design media, requires new approaches to the design process itself. Also required are new solutions in adequate, three-dimensional, haptic presentation methods (model making), in order to secure the physical control of the computer-generated data structures. Points of origin have been several student projects whose conception was based on the idea of the contradiction of a modern architectural approach with its inclination to industrialized parts and series. The promise of the computer based design and manufacturing process seemed to allow the realization of almost every imaginable architectural shape for the same costs as those in regular planning and manufacturing processes. The different projects explored both static modeling methods and dynamic computer- driven development and presentation techniques. The latest project touches the field of an algorithm-based design process. Finally a possible process chain from early design stage into a three-dimensional, physical model is described. Considering the resources and financial budgets at universities, the development of an efficient manufacturing process with effective interfaces will summarize the method and finalize the study process.
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: