CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

_id bb35
authors Paranandi, Murali
year 2002
title An Inquiry Into Computers in Design: When Cardboard Met Computer
doi https://doi.org/10.52842/conf.caadria.2002.329
source CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 329-337
summary This paper reflects on the experiences of teaching undergraduate design studios for past 4 years and presents a systematic investigation conducted in a classroom setting to further understand the role of computer in conceptual stages of design. A case study project inquiring the implications of using two different forms of media, namely cardboard and computer, for design development during conceptual stages is presented. Twelve novice designers were challenged to learn and use computers in a five-week design project. A conceptual framework for understanding the discovery and usefulness of computer in their design process was developed and tested. An analysis of the outcome indicated that computers played a positive role in student innovation, improving possibilities for discovery. It further revealed that the employing cardboard was useful in turning the abstract discoveries made by the computers into productive and useful design solutions. It also supported the notion that the novice designer’s use of photorealistic possibilities offered by computer visualization (rendering, animation) during conceptual stages of design had an effect of distraction rather than a design aid.
series CAADRIA
email paranam@muohio.edu
last changed 2022/06/07 08:00

_id 1992
authors Russell, Peter
year 2002
title Using Higher Level Programming in Interdisciplinary teams as a means of training for Concurrent Engineering
doi https://doi.org/10.52842/conf.ecaade.2002.014
source Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 14-19
summary The paper explains a didactical method for training students that has been run three times to date. The premise of the course is to combine students from different faculties into interdisciplinary teams. These teams then have a complex problem to resolve within an extremely short time span. In light of recent works from Joy and Kurzweil, the theme Robotics was chosen as an exercise that is timely, interesting and related, but not central to the studies of the various faculties. In groups of 3 to 5, students from faculties of architecture, computer science and mechanical engineering are entrusted to design, build and program a robot which must successfully execute a prescribed set of actions in a competitive atmosphere. The entire course lasts ten days and culminates with the competitive evaluation. The robots must navigate a labyrinth, communicate with on another and be able to cover longer distances with some speed. In order to simplify the resources available to the students, the Lego Mindstorms Robotic syshed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).ural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosg and programming a winning robot. These differences became apparent early in the sessions and each group had to find ways to communicate their ideas and to collectively develop them by building on the strengths of each team member.
series eCAADe
type normal paper
email russell@bazillus.architektur.rwth-aachen.de
last changed 2022/06/07 07:56

_id ddssar0206
id ddssar0206
authors Bax, M.F.Th. and Trum, H.M.G.J.
year 2002
title Faculties of Architecture
source Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series DDSS
last changed 2003/11/21 15:16

_id ddssup0204
id ddssup0204
authors Caratù, G., Concilio, G. and Monno, V.
year 2002
title Structuring Lay Knowledge in a GI Perspective: Problems and Pitfall
source Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary The present contribution, starting from some considerations developed in environmental planning domain, discusses the representation of lay knowledge in a GIS environment. Two paths of exploration in dealing with representational problems are sketched. The first is concerned with the structuring of an acquired cognitive base and, the other is about the implementation of cognitive routines. In particular the structuring process of a lay cognitive base is discussed starting from recent developments in GIS technologies and information theories. Difficulties and pitfalls, which arouse during a case study related to an environmental planning experience being carried on for a national natural park, are presented. The experimentation work is discussed also in relation with a preliminary attempt of outputs validation carried out with people who, in a preliminary stage, were interviewed in order to acquire lay knowledge.
series DDSS
last changed 2003/08/07 16:36

_id a22a
authors Heylighen, Ann and Neuckermans, Herman
year 2002
title ARE ARCHITECTS NATURAL CASE-BASED DESIGNERS? EXPERTS SPEAKING
source The Design Journal, Volume 5, Issue 2, 2002, pp. 8-22
summary Addressing the subject of Case-Based Reasoning in design, this article reports on a series of in-depth interviews with expert architects/design teachers about the role of cases in design practice and education. Several ingredients of the Case-Based Design (CBD) recipe turned out to occur in real-world design, be it in a subtler version than CBD researchers usually assume. The article focuses primarily on design in architecture, yet the findings may be relevant for other design domains as well.
keywords Architectural Design; Case-based Design; Design Education
series journal paper
type normal paper
email Ann.Heylighen@asro.kuleuven.ac.be
last changed 2005/07/26 18:53

_id e8e0
authors Huang, Y.H.
year 2002
title What Designers See from a Case? A Cognitive Approach
doi https://doi.org/10.52842/conf.caadria.2002.167
source CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 167-174
summary In the behavior of human cognition, Schank, a cognitive researcher, claims that human frequently rely on past experience to solve new problems. The information and knowledge of well-trained designers was obtained from fundamental training courses in schools, from everyday experience, and importantly from several design cases. Acquiring knowledge by seeing cases is the most important activity in the design process. But, there are no related works from cognitive view to discuss what and how designers see from instances. Thus, this paper attempts to investigate what designers can see as some meaningful elements from instances, what relationships are among elements and knowledge which retrieved from designers’ long-term memory, and how new obtained knowledge influences the design outcomes.
series CAADRIA
email yinghsiu@arch.nctu.edu.tw
last changed 2022/06/07 07:49

_id ed3c
authors Kuenstle, Michael W.
year 2002
title Escarpment Study in a Virtual Flow Environment: A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations
doi https://doi.org/10.52842/conf.acadia.2002.239
source Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 239-247
summary This paper documents the progress of research to investigate the integration of 3-dimensionalcomputational modeling techniques into wind mitigation analysis and design for building structureslocated in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flowand wind pressure as well as their translation into design criteria for structural analysis and design arereviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application casestudy for a simulated "3-second gust" hurricane force wind flow over a low rectangular building locatedin a coastal region of south Florida. The case study project models the wind flow behavior and pressuredistribution over the building structure when situated in three varying conditions within a single terrainexposure category. The simulations include three-dimensional modeling of the building type constructed(1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and(3) on-grade downwind of an escarpment. The techniques and parameters for development of thesimulations are discussed and some preliminary interpretations of the results are evaluated bycomparing their predictions to existing experimental and analytical data, with special attention paid tothe numerical methods outlined in the American Society of Civil Engineers, Minimum Design Loads forBuildings and Other Structures, ASCE 7-98.
series ACADIA
email kuenstle@ufl.edu
last changed 2022/06/07 07:52

_id 3071
authors Kuenstle, Michael W.
year 2002
title Escarpment Study in a Virtual Flow Environment A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations [Escarpment Study in a Virtual Flow Environment. A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations]
source SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 167-171
summary This paper documents the progress of research to investigate the integration of 3-dimensional computational modeling techniques into wind mitigation analysis and design for building structures located in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application case study for asimulated “3-second gust” hurricane force wind flow over a low rectangular building located in a coastal region of south Florida. The case study project models the wind flow behavior and pressure distribution over the building structure when situated in three varying conditions within a single terrain exposure category. The simulations include three-dimensional modeling of the building type constructed (1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and (3) ongradedownwind of an escarpment. The techniques and parameters for development of the simulations are discussed and some preliminary interpretations of the results are evaluated by comparing their predictions to existing experimental and analytical data, with special attention paid to the numerical methods outlined in the American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ASCE 7-98.
series SIGRADI
email kuenstle@ufl.edu
last changed 2016/03/10 09:54

_id 79b4
authors Kuenstle, Michael W.
year 2002
title Flow Structure Environment Simulation - A Comparative Analysis of Wind Flow Phenomena and Building Structure Interaction
doi https://doi.org/10.52842/conf.ecaade.2002.564
source Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 564-568
summary This paper documents the progress of research to investigate the integration of computational modeling techniques into wind mitigation analysis and design for building structures located in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application case study for a simulated “3-second gust” wind flow over a low rectangular building located in a coastal region. The case study project models the wind flow behavior and pressure distribution over the building structure when situated in three varying conditions within a single terrain exposure category. The simulations include three-dimensional modeling of the building type constructed (1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and (3) on-grade downwind of an escarpment. The techniques and parameters for development of the simulations are discussed and some preliminary interpretations of the results are evaluated by comparing their predictions to existing experimental and analytical data.
series eCAADe
email kuenstle@ufl.edu
last changed 2022/06/07 07:52

_id 6cde
authors Liapi, Katherine A.
year 2002
title Transformable Architecture Inspired by the Origami Art: Computer Visualization as a Tool for Form Exploration
doi https://doi.org/10.52842/conf.acadia.2002.381
source Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 381-388
summary Membrane packaging has been the main feature of the earliest prototypes of transformablearchitecture. Similar concepts of spatial transformation are encountered in the origami art where aplanar paper surface, after folding, transforms to a 3-dimentional object. The geometric configuration ofcreases on a sheet of paper before folding, as well as the topological properties of 3D origami papermodels, have been recently addressed, and can be used as a guide for the design of new forms.Because membranes in general can be considered surfaces of minimal thickness, principles of theorigami art and math can find applications in the conception and design of transformable membranestructures for architecture. This paper discusses how computer visualization can be used to explorethe potential application of ideas borrowed from the origami art in the conceptual design oftransformable structures. A two-case study that shows how origami math is integrated in the computervisualization of a potential architectural application is included. The same study also shows thatanimated simulations of the transformation process during folding can identify problems in the initialgeometric conception of an origami type structure, and can be used for further morphologicalexplorations.
series ACADIA
last changed 2022/06/07 07:59

_id 4544
authors Morozumi, M., Shimokawa, Y. and Homma, R.
year 2002
title Schematic design system for flexible and multi-aspect design thinking
source Automation in Construction 11 (2) (2002) pp. 147-159
summary A designer-friendly CAD for a schematic design is one of the important topics of CAD studies. There were attractive preceding studies aiming to develop a CAD that intended to enable designers to have flexible design thinking and interactively manipulate representation models. This paper has the same goals of study, but focuses on the needs to support flexible and multi-aspect design thinking. Though designers normally hope to elaborate on their ideas using separate sets of representation models suitable for respective studies, a present CAD that is designed to build a single set 3D model, has limited its ability as a tool for a schematic design. Assuming this as the base concept, authors have studied to develop a prototype of a schematic design system, customizing AutoCAD R14J: Schematic Design System '98 (SDS'98). It has convenient utilities both for building separate sets of representation models and for integrating and reconciling those models to build a single consolidate model. This paper discusses the common procedures of schematic design studies, necessary functional features for SDS, a case study of the system use, and finally, the advantages and the disadvantages of the proposed system.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id acadia16_140
id acadia16_140
authors Nejur, Andrei; Steinfeld, Kyle
year 2016
title Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi https://doi.org/10.52842/conf.acadia.2016.140
source ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords tool-building, design simulation, fabrication, computation, megalith
series ACADIA
type paper
email ksteinfe@berkeley.edu
last changed 2022/06/07 07:58

_id d5b5
authors Wu, S., Ghenniwa, H. and Shen, W.
year 2002
title User Model of a Personal Assistant in Collaborative Design Environments
source Gero JS and Brazier FMT (eds) (2002) Agents in Design 2002. Key Centre of Design Computing and Cognition, University of Sydney, pp. 39-54
summary During the past decade, intelligent agents have been applied in attempts to a number of collaborative engineering design systems. Intelligent interface agents or personal assistants play a very important role in such systems. A fundamental issue in designing a personal assistant is how to build adequate models of the user and the domain. This paper proposes a cognitive user model of a personal assistant in collaborative design environments, which comprises a user interest model, a user behavior model, an inference component and a collaboration component. These models and components can help agents effectively achieve the user's goals. The proposed user model is being implemented in a coordinated, intelligent, rational agent (CIR-Agent) model on a FIPA-compliant platform. A case study in a multidisciplinary design optimization (MDO) software environment is also presented.
series other
email Weiming.Shen@nrc.ca
last changed 2003/05/10 10:16

_id 9c41
authors Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year 2002
title CAADRIA 2002 [Conference Proceedings]
doi https://doi.org/10.52842/conf.caadria.2002.
source Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series CAADRIA
email ahmadrafi.eshaq@mmu.edu.my
more www.caadria.org
last changed 2022/06/07 07:54

_id 59ca
authors Bhavnani, S.K. and Bates, M.J.
year 2002
title Separating the Knowledge Layers: Cognitive Analysis of Search Knowledge Through Hierarchical Goal Decompositions
source Proceedings of the ASIST'2002 (2002), 204-213
summary Hierarchical goal decompositions have proved to be a useful method to make explicit the knowledge required by users to perform tasks in a wide range of applications such as computeraided drafting (CAD) systems. This analysis method progressively decomposes a given task starting from the task layer on the top of the decomposition, to the keystroke layer at the bottom. The analysis enables a close inspection of the knowledge required to perform the task at each layer of the decomposition. In this paper we show how the method of hierarchical goal decomposition can be used to understand more precisely the knowledge that is required to perform information search tasks. The analysis pinpoints: (1) the critical strategies in the intermediate layers of knowledge that are known by experts searchers; (2) why such knowledge is difficult to acquire by novice searchers; (3) how the analysis provides testable predictions of behavior based on the acquisition of different types of knowledge. We conclude by discussing the advantages provided by hierarchical goal decompositions, and how such an approach can lead to the design of systems and training.
series other
email bhavnani@umich.edu
last changed 2003/11/21 15:16

_id acadia07_174
id acadia07_174
authors Bontemps, Arnaud; Potvin, André; Demers, Claude
year 2007
title The Dynamics of Physical Ambiences
doi https://doi.org/10.52842/conf.acadia.2007.174
source Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series ACADIA
email arnaudbontemps@hotmail.com
last changed 2022/06/07 07:54

_id 5965
authors Bueno, Ernesto and Salguero, Cesar
year 2002
title Centro Virtual de Arte Digital Venezolano - Proyecto de Titulación sobre Arquitectura para el Ciberespacio [Virtual Center of Venezuelan Digital Art - Thesis Project on Architecture for the Cyberspace ]
source SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 180-183
summary This article talks about the development and presentation of our work of Degree Thesis, framed inside a Degree Theses restructuring process in the School of Architecture, in this case, emphasizing in virtual buildings design. The Virtual Centre of Venezuelan Digital Art project is a research and design project of a type of Arts Centre with cyberspace only presence specialized in the exhibition of Venezuelan digital art. The first part of it needed an information research, studies in the diverse ways in thatcomputers have being used for virtual museums design, the diverse focuses for the creation of this type of museums and the study of a museum model that adapts to the way this project were focused. When completing the theoretical basement, the individual proposals were developed. In general terms, the prospective results were achieved.
series SIGRADI
email ernesto@posta.arq.ucv.ve, salgueros@cantv.net
last changed 2016/03/10 09:47

_id d5e1
authors Bugajska, Malgorzata Maria
year 2002
title Spatial Visualization of abstract Information: A Classification Model for Visual Spatial Design Guidelines in the Digital Domain
source Swiss Federal Institute of Technology, ETH Zurich
summary Visualization of abstract information refers to the design of graphical representations of information that has no simple relation to known concrete or physical forms. Designing visualizations of abstract information requires proposing visual representation for often a large body of data pants. determining a meaningful structure for the complex relations among them and suggesting a method for Interacting with this body of data. Spatial perception plays an Important role for cognitive processing when interacting with abstract information, slice spatially-organized Information can be accessed and operated on rapidly and effortlessly, especially when a spatial arrangement reveals the conceptual organization of Information.

This thesis focuses on aspects of the spatial visual design of abstract information presented as computer-generated. dynamic and interactive images accessible through flat displays. The process of spatial visualization design is shaped by various factors including interactive, perceptual, navigational as well as organizational and metaphorical aspects and as such requires an interdisciplinary approach. Therefore, in researching spatial visual design. it is crucial to use methods facilitating the process of sharing competencies among different disciplines.

In this thesis, we introduce a new classification model accommodating features important in designing effective spatial visualizations of abstract information. To enhance the effectiveness of spatial visualization, this model offers a holistic approach in classifiying spatial Visualization features. As part of the model, we analyze properties already used in architectural representation and other visual design disciplines for spatial presentations as well as investigate their potential usage in digital domains of abstract information. The process of spatial visualization In the digital environment is mostly based on the practical experience of a designer. and therefore the majority of spatial design know-how is heuristic in nature. Based on this assumption, we present a set of guidelines addressing the general problem of spatial design.

The Spalial Design Classificahon Model, Visual Spatial Properties and Spatial Design Guidelines build an extendable infrastructure which becomes a first step towards augmenting the quality of spatial information design- We propose to use this infrastructure as a general blueprint for structuring the exchange of expertise in Interdisciplinary problem-solving processes.

series thesis:PhD
last changed 2003/05/15 12:22

_id 63c3
authors Burdi, Luciana
year 2002
title Evaluating the Use of a Web-Based Collaborative Interactive Digital Model (CollABITA) in Supporting the Urban Design Approval Process1
source UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, III.1-III.15
summary This research, after analyzing the Urban Development Approval Process in its functionalities and methodologies, is showing the key points at which the process might be supported by new computer technologies, and it establishes a web-based Collaborative Interactive Digital Model (CollABITA Model) that relates and facilitates the graphical representation of the urban design process with some elements of the methodological approach. The CollABITA Model will dramatically facilitate the idea of broadening public participation, and indirectly by this, also collaboration. This new web-based support tool, is focusing on how new Informative Computer Technologies can be used in order to have a more co-operative design process. By utilizing the enormous potential of Internet for informing the process, and software for visualizing its products, the Model will provide an effective support, which will be able to deliver information in various forms to the Designers, Developers, Decision Makers, Agencies and the final user (the Citizens). The Model is concerned with the big challenge of supporting the urban design approval process itself, by exploring different kind of visualizations and communication tools, rather than producing a guide for carrying out the design. CollABITA Model is based on the existent framework structure of the extranet tool already available. Then, more then those, CollABITA Model will try to solve, by adding technical and collaborative functionalities, those issues that are characteristics in the urban design process and that are not jet solved by using one of the software .
keywords 3D City modeling
series other
email lburdi@gsd.harvard.edu
more www.udms.net
last changed 2003/03/29 10:43

_id c82f
authors Chang, Yu-Li
year 2002
title Exploring syntax and semantics of spatial structure - A study on Traditional Taiwanese City form in Chi’i’ng Dynasty
doi https://doi.org/10.52842/conf.ecaade.2002.412
source Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 412-416
summary Abstract. In this paper, we want to figure out the relations of complex semantics and syntax on five traditional Taiwanese cities in Chi’i’ng Dynasty by using a language approach. The issues of traditional Taiwanese central city in Chi’ing Dynasty had been interpreting by historical, social, and cultural research but had lacked the explicit construction of spatial structure on semantics-syntax. Therefore, we use a data modeling on knowledge level to describe the relationship between syntax and semantics. Through the research of Chi’ing Dynasty‘s history, we find out the spatial relations of Taiwanese traditional city to establish the functional categories of spatial structures. Then the language of semantics components and the meaning’s attributes are coded as logical statements to map the elements of syntax on architectural form, political vocabularies, spatial layout, and spatial myth. We argue that using this approach several social and spatial structures of cities can be clearly defined and understood.
series eCAADe
email jecho@arch.nctu.edu.tw
last changed 2022/06/07 07:55

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 25HOMELOGIN (you are user _anon_159377 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002