Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 507

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0223
id	ddssar0223
authors	Mahdavi, A, Suter G. and Ries, R.
year	2002
title	A Representation Scheme for Integrated Building Performance Analysis
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents a representational scheme for integrated building performance analysis. The underlying research work was motivated by the need for seamless exchange of structured design information.A comprehensive and widely accepted industry standard suitable for exchanging design information among the various AEC (Architecture/Engineering/Construction) applications has yet to emerge. As a contribution to this on-going discussion, we present a specific approach to the integration problem in building product modeling. This approach can be viewed as pragmatic or bottom-up in the sense that itwas driven by the informational needs of related individual domains (particularly in the early stages of design) rather than by a quest for a universally applicable solution. In this paper, we describe a schemawhich emerged from the SEMPER effort, a multi-year project aimed at supporting detailed performance analysis for early design in the energy, life-cycle analysis, lighting, and thermal comfort domains. Thisschema relies on a representational division of labor between a shared building model, and various disciplinary (domain) models. Specifically, we present a documentation of the shared object model together with disciplinary models for the energy, light, acoustics, and life-cyle assessment domain.
keywords	building product models, building performance, integration
series	DDSS
last changed	2003/08/07 16:36

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddssar0213
id	ddssar0213
authors	De Groot, Ellie and Paule, Bernard
year	2002
title	DIAL-Europe: New Functionality’s for an Integrated Daylighting Design Tool
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The European project DIAL-Europe started in April 2000 and intends to enhance and to enlarge the capabilities of the LesoDIAL software. The aim of this “Swiss” tool was to give architects relevant information regarding the use of daylight, at the very first stage of the design process. DIAL-Europe focuses on European standards and climatic data. Further, a Heating & Cooling evaluation module and an Artificial Lighting module will be added. The objective of the Heating & Cooling module is to indicate the implications of the user’s design on heating and cooling energy and on thermal comfort.The objective of Artificial Lighting module is to develop a tool that will give an estimation of illuminance values on the work plane and provide guidance on qualitative aspects and visual comfort as well as on switching control and integration with daylight based on generic light sources and luminaires. Furthermore, the scope of the examples of simulated rooms will be increased in order to allow the user to compare their design with more similar cases. This paper will present the state of achievement and give an overview of the first version of the DIAL-Europe software, which will beavailable at the beginning of 2002.
series	DDSS
last changed	2003/08/07 16:36

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddssup0212
id	ddssup0212
authors	Nascimento, M.A.P., Francisco, S.D., Souza, L.C.L. and Silva, A.N.R.
year	2002
title	A Multimedia Application to Support Professionals in an EnvironmentallyResponsible Building Design Process
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	One of the problems faced by the design professionals in trying to incorporate thermal and acoustic concerns when designing a building is the quantity and diversity of building materials that can be applied to improve a poor indoor environment and, in many cases, to later reduce energy consumption. The large amount of information on building materials usually provided as documents makes it almost impossible to the designer to compare products. In the light of the stated facts, the objective of this work was the development of a multimedia application, which was thought as a module of a more comprehensive system able to support professionals in an environmentally responsible building design process. The application takes advantage of the ability of computers to handle texts, images, sounds and movies to introduce several building materials and their characteristics to the designers, in an interactive way. The conclusion of this stage shows that rather than being a module of a larger system, the developed application can work as a powerful standalone multimedia catalogue of building materials that have special interest on thermal, acoustic, and thermal-acoustic applications. It is an application that are notonly fundamental in a support system for effective building design, but also a powerful tool for training architecture students as part of an environmentally responsible building design process.
series	DDSS
last changed	2003/08/07 16:36

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	caadria2019_307
id	caadria2019_307
authors	Nguyen, Binh Vinh Duc, Peng, Chengzhi and Wang, Tsung-Hsien
year	2019
title	KOALA - Developing a generative house design system with agent-based modelling of social spatial processes
doi	https://doi.org/10.52842/conf.caadria.2019.1.235
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 235-244
summary	The paper presents the development of an agent-based approach to modelling the interaction of human emotion and behaviour with built spaces. The study addresses how human behaviour and social relation can be represented and modelled to interact with a virtual built environment composed in parametric architectural geometry. KOALA, a prototype of agent-based modelling of social spatial dynamics at the core of a parametric architectural design environment is proposed. In building KOALA's system architecture, we adapted the PECS (Physical, Emotional, Cognitive, Social) reference model of human behaviour (Schmidt 2002) and introduced the concept of Social Spatial Comfort as a measurement of three key factors influencing human spatial experiences. KOALA was evaluated by a comparative modelling of two contrasting Vietnamese dwellings known to us. As expected, KOALA returns very different temporal characteristics of spatial modifications of the two dwellings over a simulated timeframe of one year. We discuss the lessons learned and further research required.
keywords	Parametricism; generative house design system; architectural parametric geometry; human behaviour; social-spatial dynamics
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	073c
authors	Papamichael, Kostas and Pal, Vineeta
year	2002
title	Bridging the Gap Between Building Science and Designing Studios
doi	https://doi.org/10.52842/conf.caadria.2002.123
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 123-130
summary	Design studios and building science courses have been conducted independent of each other, mainly due to a lack of tools that allow quick and easy consideration of building science criteria, such as comfort and energy requirements, during the design process. Existing tools are not user-friendly and their use requires significant effort in gaining familiarity with the input requirements, understanding the modeling assumptions and interpreting the output. This paper is about the Building Design Advisor (BDA), an evolving computer-based tool intended to bridge the gap between design studios and building science considerations by addressing the above-mentioned limitations of existing tools. BDA allows automatic preparation of input files to multiple simulation tools while the user is working in a CAD environment. BDA automatically activates the relevant simulation tools when the user selects performance parameters to be computed and provides the results in a graphical form, allowing comparison of multiple design options with respect to multiple performance criteria. The paper includes considerations for the use of the BDA in the design studio and ends with a description of the current development efforts and future plans.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	899b
authors	Alvarado, R.G., Abufarde, F.B., Moreno, P.R. and Bravo, M.P.
year	2002
title	Modelación de Actividades [Modeling of Activities]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 151-154
summary	Despite increasing interest in the functionality and humanization of architecture, scarcely the occupation of buildings are studied and it lacks methods to represent activities in the spaces. By this reason, it proposes a system such integrates simulation of processes and virtual modeling software, to program the behavior of tri-dimensional characters based on the probabilistic evolution of events, testing this approach in the study of emergency services of hospitals. It describes the procedure developed and reflections about temporal representation, demonstrating that modeling of activities allows to suggest functional and spatial improvements.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	5965
authors	Bueno, Ernesto and Salguero, Cesar
year	2002
title	Centro Virtual de Arte Digital Venezolano - Proyecto de Titulación sobre Arquitectura para el Ciberespacio [Virtual Center of Venezuelan Digital Art - Thesis Project on Architecture for the Cyberspace ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 180-183
summary	This article talks about the development and presentation of our work of Degree Thesis, framed inside a Degree Theses restructuring process in the School of Architecture, in this case, emphasizing in virtual buildings design. The Virtual Centre of Venezuelan Digital Art project is a research and design project of a type of Arts Centre with cyberspace only presence specialized in the exhibition of Venezuelan digital art. The first part of it needed an information research, studies in the diverse ways in thatcomputers have being used for virtual museums design, the diverse focuses for the creation of this type of museums and the study of a museum model that adapts to the way this project were focused. When completing the theoretical basement, the individual proposals were developed. In general terms, the prospective results were achieved.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ad19
id	ad19
authors	Calderon, C., and Noble, R
year	2005
title	BEYOND MODELLING: AVANT-GARDE COMPUTER TECHNIQUES IN RESIDENTIAL BUILDINGS.
source	I Jornadas de Investigacion en Construccion, Madrid, 2-4 June, 2005.
summary	If the result of computer innovations can be interpreted as an emerging “difference” in the quality of constructed space, then in order to truly understand what future applications may be regarding architecture at present, we should look at what advanced functions are available in the process of designing forms and space (DeLuca and Nardini, 2002). Recently the so called parametric approach, a technique for describing a large class of designs with a small description in programming code, has become a focus of attention in architectural computing. In this paper, we reflect on the current use of parametric tools using real case studies as well as our own proof of concept parametric programmes and report on how the avant-garde computer techniques may help to increase the quality of residential building.
keywords	Building Quality, Parametric Design
series	other
type	normal paper
email
last changed	2005/12/02 11:42

_id	2d54
authors	Clayton, M.J., Warden, R.B. and Parker, Th.W.
year	2002
title	Virtual construction of architecture using 3D CAD and simulation
source	Automation in Construction 11 (2) (2002) pp. 227-235
summary	3D modeling and computer simulations provide new ways for architecture students to study the relationship between the design and construction of buildings. Digital media help to integrate and expand the content of courses in drafting, construction and design. This paper describes computer-based exercises that intensify the student's experience of construction in several courses from sophomore to senior level. The courses integrate content from drafting and design communication, construction, CAD, and design.Several techniques are used to strengthen students' awareness and ability in construction. These include: Virtual design–build projects in which students construct 3D CAD models that include all elements that are used in construction. Virtual office in which several students must collaborate under the supervision of a student acting as project architect to create a 3D CAD model and design development documents. Virtual sub-contracting in which each student builds a trade specific 3D CAD model of a building and all of the trade specific models must be combined into a single model. Construction simulations (4D CAD) in which students build 3D CAD models showing all components and then animate them to illustrate the assembly process. Cost estimating using spreadsheets. These techniques are applied and reapplied at several points in the curriculum in both technical laboratory courses and design studios. This paper compares virtual construction methods to physical design–build projects and provides our pedagogical arguments for the use of digital media for understanding construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0207
id	ddssar0207
authors	Conti, G. and Ucelli, G.
year	2002
title	A Java3D Tool for Real-Time Collaboration in a Virtual Reality CAADEnvironment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today the development of network-based virtual communities and the use of avatars have brought a new level of complexity to the meaning of virtuality, providing the technology for remote presence and collaborative experiences. In this project the intention was to pursue this articulated vision of VR in order to assist the design profession during the early stages of the design process. The objective was to provide a tool that is capable of creating 3D shapes in a shared VR environment, thus allowing thedesign and its evolution to be shared. The use of the Java programming language was a natural choice for this project. Because of Java’s performance scalability and hardware independence the concept ofCAAD has been extended, making it possible to create a VR environment that can co-exist between high-end supercomputers and standard PCs. The project is currently being tested using PCs and an SGI system running a Reality Centre. The research reported in this paper describes the architecture and application of software that aims to increase the opportunity for collaboration within virtual worlds and enable effective and transparent information exchange.
series	DDSS
last changed	2003/08/07 16:36

_id	ecaade2008_008
id	ecaade2008_008
authors	Cypriano, Débora Z.; Celani, Gabriela
year	2008
title	Sloping Façade Buildings in Brazilian Modern Architecture
doi	https://doi.org/10.52842/conf.ecaade.2008.061
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 61-68
summary	Sloping façade buildings have been present throughout XXth century architecture, for different programs and in different countries. One of the first architects to use sloping façades was probably Frank Lloyd Wright, two early examples being Taliesin West (1937) and the Annie Pfeiffer Chapel at Florida Southern College (1938-41). In Brazilian Modern architecture sloping façades soon became a recurrent solution, the earlier examples being produced by architects Oscar Niemeyer, João V. Artigas and Affonso E. Reidy, possibly influenced by FLW, as suggested by Irigoyen (2002). The present research proposes that these buildings may have influenced other architects in Brazil and abroad. In order to confirm this hypothesis, a design process was modelled and a shape grammar was developed to describe a small corpus of buildings designed by these three architects in the 1940´s and 1950´s.
keywords	Sloping façade buildings, shape grammar, Brazilian modern architecture
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: