Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 510

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	7012
authors	Sheng-Fen, Chien
year	2002
title	Design Gaming, Designing Games - Learning Design through Game Playing and Game Making
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 28-33
doi	https://doi.org/10.52842/conf.ecaade.2002.028
summary	This is an ongoing effort to make design learning fun and constructive. The process of designing, in many respects, is very similar to playing games: exploring possibilities under certain constraints. Since 1999, the “designing as game playing” concept has been used in architectural design studios and related courses in my institution. In the early years, preexisting games or games created by instructors were used. These games were played in a junior-year course that emphasized design decision-making and design collaborations. In recent two years, design game making has been used as a vehicle for senior-year student to strengthen their analytical skills. So far, students have developed games of Mario Botta, Le Corbusier (Villa Savoy), Aldolf Loos, Mies van der Rohe, and Richard Meier. Two more games are underdevelopment: the games of Isosaki and Tadao Ando. Some of these games have been used in freshman-year courses to introduce certain principles of form composition. Playing design games enables students to gain design knowledge as well as to be able to view design constraints constructively as special characteristics on the game board that may turn to their advantages rather than as useless stumbling blocks. Designing games requires students to analyze existing designs in great details as well as to be able to organize certain relationships of these details into operable rules that could produce new designs. The experience of teaching “games and design” to-date has been a very fruitful one. Future work will focus on design gaming for freshman students and game designing for senior students, as well as the interaction between the freshmen (game players) and the seniors (game designers).
series	eCAADe
email
last changed	2022/06/07 07:56

_id	0a71
authors	Barros, Diana Rodríguez
year	2002
title	Sistemas hipermediales, efectos del tamaño de los nodos y del número de vínculos [Hyper medial Systems; Size effects of the nodes and number of bonds]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 186-189
summary	A Hypermedia system is, morphologically speaking, an information structure which organizes a set of elements of alphanumeric and graphic nature as a web. This enables a multidimensional access from specific interests. One of the most widespread hypermedia applications is within the field of education. There should be validation criteria which contribute to systematize and direct design processes for didactic hypermedia. This work aims at becoming a contribution by analyzing the relations and effects produced by the number of links and node sizes on some basic didactic uses; particularly, within information search, learning and attitude towards hypermedia. From the results obtained, we propose guidelines for the design of didactic Web Sites and CD Rom.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	265f
authors	Groisman, M., Montagu, A.F. and Pimentel, D.
year	2002
title	El ciclo, la línea y la trama. Las formas de aproximación a una educación en perpetua reforma [The cycle, the line and the grid. Ways to approach towards a progressive education.]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 47-50
summary	The present situation of the educational procedures in Latin American countries are under a critical process of paradigmatic changes as a by product of the last connection with the industrial world and the first one of the “information society”. The design disciplines has been affected by this situation and started to be the main challenge for architects and designers in order to understand the potentialities of the new technologies avoiding to be used as simple “cliches”. Regarding digital technologies, the graduated and post graduated strategy for the new courses should be organized as flexible and open systems avoiding the “clip art” environment and the obsolete models of education. The “digital culture” combined with extensive procedures of “information technology” has defined an overwhelming expansion of “virtual services” (intangibles) in opposition of the “world of objects” (tangibles). Therefore we have been organized a new “digitaldesign”course at post graduated level comprising five careers (Architecture, Industrial, Graphic, Textil and Garment, and Imageand Sound Design) of our Faculty.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	1992
authors	Russell, Peter
year	2002
title	Using Higher Level Programming in Interdisciplinary teams as a means of training for Concurrent Engineering
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 14-19
doi	https://doi.org/10.52842/conf.ecaade.2002.014
summary	The paper explains a didactical method for training students that has been run three times to date. The premise of the course is to combine students from different faculties into interdisciplinary teams. These teams then have a complex problem to resolve within an extremely short time span. In light of recent works from Joy and Kurzweil, the theme Robotics was chosen as an exercise that is timely, interesting and related, but not central to the studies of the various faculties. In groups of 3 to 5, students from faculties of architecture, computer science and mechanical engineering are entrusted to design, build and program a robot which must successfully execute a prescribed set of actions in a competitive atmosphere. The entire course lasts ten days and culminates with the competitive evaluation. The robots must navigate a labyrinth, communicate with on another and be able to cover longer distances with some speed. In order to simplify the resources available to the students, the Lego Mindstorms Robotic syshed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).ural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosg and programming a winning robot. These differences became apparent early in the sessions and each group had to find ways to communicate their ideas and to collectively develop them by building on the strengths of each team member.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	a555
authors	Trujillo, Iván León
year	2002
title	Hacia un vínculo entre el boceto y las herramientas de modelado NURBS: La representación de superficies de doble curvatura en el diseño industrial [The link between the Sketch and Tools of Modeled NURBS: The Representation of Surfaces of Double Curvature in Industrial Design ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 289-290
summary	This poster shows a methodological approach developed at the School ofIndustrial Design (Universidad de Los Andes, Venezuela) in order to achievethree objectives. Firstly, to assist future industrial designers to analyze and guide their ideas during the early stages of the design process with a sort of graphics, whose expressive precision is different to the metric one. Secondly, to help students to improve their graphic skills in order to communicate their ideas to others during the form creation phases of thedesign process. Thirdly, to promote the use of drawing as a way to define a link between hand drawing and modeling in CAD’s NURBS*. These aspects are especially relevant if we consider that such methodological links, although are frequently assumed by some design firms, they have been hardly visualized in the academic environment as part of the “teaching- learning” process.
keywords	Industrial design / Double-curved surfaces / Representation and communication / Product’s graphics.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ee65
authors	Bourdakis, Vassilis and Charitos, Dimitris
year	2002
title	Teaching Virtual Environment Design
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 42-49
doi	https://doi.org/10.52842/conf.ecaade.2002.042
summary	In a previous paper, the authors considered the design and development of virtual environments (VEs) pointing out the need for a new direction within architectural education, leading towards a generation of VE architects. It was suggested that there is an urgent need for educating practitioners who will contribute to the design of 3D content for multimedia and virtual reality applications. This paper focuses on the application of these principles and ideas into the structure and methodology of three VE design courses, taught by the authors. These courses are by no means suggested as exhaustive examples of teaching this subject. They are seen as preliminary approaches, adapting to the educational context they are integrated within. Bearing in mind the problems relating to teaching large numbers of students with a design studio approach, difficult concepts, resources availability, fighting misconceptions, techno-phobia the following areas are discussed in the hope that they will contribute to VE design curricula in the near future.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	d5e1
authors	Bugajska, Malgorzata Maria
year	2002
title	Spatial Visualization of abstract Information: A Classification Model for Visual Spatial Design Guidelines in the Digital Domain
source	Swiss Federal Institute of Technology, ETH Zurich
summary	Visualization of abstract information refers to the design of graphical representations of information that has no simple relation to known concrete or physical forms. Designing visualizations of abstract information requires proposing visual representation for often a large body of data pants. determining a meaningful structure for the complex relations among them and suggesting a method for Interacting with this body of data. Spatial perception plays an Important role for cognitive processing when interacting with abstract information, slice spatially-organized Information can be accessed and operated on rapidly and effortlessly, especially when a spatial arrangement reveals the conceptual organization of Information. This thesis focuses on aspects of the spatial visual design of abstract information presented as computer-generated. dynamic and interactive images accessible through flat displays. The process of spatial visualization design is shaped by various factors including interactive, perceptual, navigational as well as organizational and metaphorical aspects and as such requires an interdisciplinary approach. Therefore, in researching spatial visual design. it is crucial to use methods facilitating the process of sharing competencies among different disciplines. In this thesis, we introduce a new classification model accommodating features important in designing effective spatial visualizations of abstract information. To enhance the effectiveness of spatial visualization, this model offers a holistic approach in classifiying spatial Visualization features. As part of the model, we analyze properties already used in architectural representation and other visual design disciplines for spatial presentations as well as investigate their potential usage in digital domains of abstract information. The process of spatial visualization In the digital environment is mostly based on the practical experience of a designer. and therefore the majority of spatial design know-how is heuristic in nature. Based on this assumption, we present a set of guidelines addressing the general problem of spatial design. The Spalial Design Classificahon Model, Visual Spatial Properties and Spatial Design Guidelines build an extendable infrastructure which becomes a first step towards augmenting the quality of spatial information design- We propose to use this infrastructure as a general blueprint for structuring the exchange of expertise in Interdisciplinary problem-solving processes.
series	thesis:PhD
last changed	2003/05/15 12:22

_id	1f31
authors	Caffarena Celani, Maria Gabriela
year	2002
title	CAD – The Creative Side - An Educational experiment that Aims at Changing Students’ Attitude in the Use of Computer-Aided Design
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 218-221
summary	The present paper describes an innovative design education system tried out at two different architecture schools in Brazil, with opposite approaches to the use of CAD. The experimental courses had two main goals: (1) to explore the use of logical operations in design, such as symmetry, recursion, parameterization, and combinatorial analysis, and (2) to apply these techniques with the use of the computers, using CAD not only as a representational tool, but rather as an explorative, customizable and programmable design aide for the creative process. The experiments resulted in a number of interesting compositions, design projects and programs, and assessment questionnaires revealed a real change in students’ attitude towards the use of CAD in architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0228
id	ga0228
authors	Celani, Maria Gabriela Caffarena
year	2002
title	CAD – The Creative Side An educational experiment that aims at changing students’ attitude
source	International Conference on Generative Art
summary	The present paper describes an innovative design education system tried out at two different architecture schools in Brazil, with opposite approaches to the use of CAD. The experimental courses had two main goals: (1) to explore the use of logical operations in design, such as symmetry, recursion, parameterization, and combinatorial analysis, and (2) to apply these techniques with the use of the computers, using CAD not only as a representational tool, but rather as an explorative, customizable and programmable design aide for the creative process. The experiments resulted in a number of interesting compositions, design projects and programs, and assessment questionnaires revealed a real change in students’ attitude towards the use of CAD in architecture. The experiments related were the field research part of a Ph.D. thesis defended at MIT in July 2002. The present work had the support of CNPq, a Brazilian entity devoted to the scientific and technological development.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	aef6
authors	Chang, David C. and Szalapaj, Peter
year	2002
title	Making Sense of Presenting Design Ideas through Animated Form
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 560-563
doi	https://doi.org/10.52842/conf.ecaade.2002.560
summary	This paper describes both conventional and computational ways of expressing and exploring design concepts with the use of models. We explain the role and function of the model in the design process, and investigate the ways in which models become reflections and representations of architects’ design thinking. We compare and contrast the physical properties of conventional models with those of three-dimensional computer models, and the corresponding processes of model creation, model development, and model modification. The paper includes a brief overview of commonly used forms of computer representations often encountered in Computer Aided Design applications. Whatever the visual richness of computer models in virtual environments can be, we believe that, just as in the use of conventional two-dimensional architectural drawings, computational presentations of architectural design concepts have their own conventions of use. This paper addresses the need to more accurately understand these conventions of using computer models for the representation of architectural design concepts. Therefore, we will illustrate the more dynamic qualities of computer models, which have the potential to allow designers to escape from the restrictions and constraints of physical form. In particular, we demonstrate these qualities in the context of architectural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	b74f
authors	Dijkstra, Jan and Timmermans, Harry
year	2002
title	Towards a multi-agent model for visualizing simulated user behavior to support the assessment of design performance
source	Automation in Construction 11 (2) (2002) pp. 135-145
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2f17
authors	Dokonal, W., Martens, B. and Plösch, R.
year	2002
title	New Expectations: City Modeling in the Internet Age
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 97-100
summary	The first part of this paper tries to give an overview over the different aspects of city modeling. After a short history on city models the paper starts with a categorization of the different “types” of city models. We try to explain the various aspects involved in the creation of a city model and the problem of maintaining a city model. Then the paper shows the example of two computer models of parts of the same European city which have been created in two different ways. The first version of this computer model tries to use as many automatic or semi automatic procedures as possible to create the model. In the paper examples of these differentprocedures are given - from the automatic creation of the buildings itself, its roofs, and the surrounding terrain to the automatic cleaning of texture photos of the façade. The second version shows a model, which has been done with just a few automatic procedures and a lot of human effort (mainly students). The paper describes the limitation of both techniques and tries to give an outlook towards the combination of these methods. We will also show the importance of internet techniques in the use and presentation of computer city models.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddssar0210
id	ddssar0210
authors	Friedl, G., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	An Innovative Model of the Building Development ProcessDesign as a Process of Crystallisation
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In the past, models describing the development of artefacts, including buildings, usually were of a linear nature thereby suggesting a sequential path from conception of the artefact to its completion. This has consequences for the sequence of activities in the design and programming phase. However, designing is basically a thinking activity and is as such not bound to the same laws as e.g. the construction process. This must have repercussions for the way the design process is designed andmanaged. The proposed conceptual model of the artefact development process – in this case a building design process – is a kind of framework which is more in accordance with the nature of thinkingactivities. It should stimulate a non-sequential process. The development of a solution to a design problem thus should become a responsive search process driven by insights and creative leaps but guided by the framework the model provides. Furthermore, the model is meant to support the exploration and clarification of the problem as well as to extend the solution space by various means such as the development of scenarios and strategic values as a basis for the realisation of the building project’s goals. This model is an essential element in the development of an innovative approach towards the process design of the building design process. The creation of a building (conception, design and development) is not considered a sequential process but a process of crystallisation with the potential of developing in all directions, thus growing from a conceptual centre outwards.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0211
id	ddssar0211
authors	Fröst, Peter
year	2002
title	Interactive Tools for Collaborative Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today’s rapidly changing society is continuously developing towards an increased demand for multistakeholder knowledge and influence in the architectural planning and design process. Accordingly, we are working with developing and setting up a partner engaged collaborative design process. It includes active collaboration between users, external partners and designers, and visualizations in conceptual design and scenario building. My research is focusing on integrating visualization technology in theseprocesses by application of digital tools. We have developed a working prototype for an interactive design tool. The prototype is an extremely “easy to use” digital modeling tool called “ForeSite Designer.” With this tool one builds one’s own spatial environment with elements on a 2D surface.With one command the 2D layout is exported to a lit-up 3D/Virtual Reality world in the computer game “Half-Life”. ForeSite Designer has lately been used in a series of workshops together with external users. In these processes ForeSite Designer has played a crucial role as an arena of building spatially arranged concepts of future environments. The results show that it works, and, importantly, promotes a collaborative engagement among the users.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0211
id	ga0211
authors	Gartland-Jones, Andrew
year	2002
title	Can a Genetic Algorithm Think Like a Composer?
source	International Conference on Generative Art
summary	There has now been a substantial body of work utilising Genetic Algorithms (GA) for the purpose of musical composition. A common point of discussion is how far GA’s can simulate not just the musical output of human composers, but also the process of composing itself. This paper begins by discussing the suitability of using a GA for composition, and goes on to describe a generative music system (by the author), that utilises a domain specific, knowledge rich GA. The system acts on a supplied 2-bar musical phrase (up to 4 parts), and evolves musical fragments towards a supplied target. The aim is to provide interim points on the evolutionary path, which represents a ‘new’ musical ideas audibly based on the supplied fragments. The paper concludes that the system is able to model at least part of the creative process of composition, and is effective at producing musically successful results. (Audio download sources of its output are included to support this conclusion). The system was used to generate music included in an interactive installation work, exhibited at Brighton Arts Festival 2002, and other applications under developed that use the algorithm are discussed.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: