Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	49a6
authors	He, J., Tsou, J.-Y. and Lam, S.
year	2002
title	Potential of Using a GIS-based Natural Visual Landscape Evaluation Tool in Large-scale Urban Planning - A Comparative Study in Dongshan New Town
doi	https://doi.org/10.52842/conf.ecaade.2002.478
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 478-487
summary	Natural visual landscape is under deterioration due to improper construction and planning in modern development of China. One of the main reasons is the feebleness in planning supporting methodology and technology in respect for natural visual landscape. In such supporting information, landscape evaluation always acts as a significant component. Especially in comprehensive planning, it is the only approach to access visual value distribution in large-scale region. In this paper, we present a GISbased natural visual landscape evaluation tool through a case study. By an integrated rating statistics function of this tool, visual quality of natural landscape is quantified through analysis in visibility, landuse, and visual resource quality. Then we make comprehensive planning strategies based on this scientific supporting tool. Furthermore, we discuss the potential of this tool by comparing these strategies with schemes of the same project conducted through traditional planning module. This comparative study reveals the efficiency and effectiveness of the tool as well as its implementation in large-scale comprehensive urban planning.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	5833
authors	Koch, V. Zwölfer, M. and Fischer, K.
year	2002
title	Turban - Time sensitive modelling of cities and urban fragments in CAD environments
doi	https://doi.org/10.52842/conf.ecaade.2002.296
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 296-300
summary	Town planning requires conscious handling of the existing urban structure and knowledge about its history. Only so planned modifications and supplements can be integrated in a sustainable manner into existing urban structures and have lasting effects. Modern CAD environments offer basically the possibility of supporting necessary planning process through additional integrated tools. In the project ‘Turban’ CAD extensions were developed additionally, providing planners and students with fundamental tools for data-capture and analysis around the temporal process from town developments.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	1df8
authors	Fedeski, M. and Sidawi, B.
year	2002
title	The Management of Internet Use, in UK Architectural Practices
doi	https://doi.org/10.52842/conf.acadia.2002.357
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 357-364
summary	The architectural profession has been slow to adopt new innovations in such areas as buildingtechnology, management, and CAD, as earlier research has shown. The Internet presents a particularchallenge. With even greater changes to the Internet expected in the near future, it is timely to ask howthe profession is adapting.Field research conducted by the author has found shortcomings in the way that architects use Internettechnology in the U.K. These involve the decisions to adopt the Internet, the management of its dailyuse, and forward planning for future adaptation. U.K. architects under-use the services available, andexperience problems with the services they do use. Their resultant dissatisfaction with what the Internetcan offer leads to a reluctance to adopt and use further Internet services.This paper discusses one aspect of that research, which is how architects are managing Internetresources in their practices. It argues that many of the difficulties that architects have are related topractice management. The paper presents these under the headings of the knowledge and attitude ofthe staff, and the decisions made by practice managers. The paper highlights features that needattention from practices and from the architects who guide them.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	2f3b
authors	Ucelli, G., Conti, G., Petric, J. and Maver, T.W.
year	2002
title	Real Experiences of Virtual Worlds
source	Proceedings of International Design Conference - Design 2002, Dubrovnik, 561-566
summary	The present use of 3D simulations or more effective virtual worlds has provided the designer with new media capable of storing several levels of information traditionally obtained only with the help of multiple media, usually more time and resource-consuming. Virtual models in particular can store information about planning issues, geometric design, material choices or even furniture and lighting conditions. This level of representation provides the designer with all the necessary tools to represent an architectural environment and facilitate the research of potentially hidden errors.
keywords	Virtual Reality; Collaborative Design; Distributed Environment
series	other
email
last changed	2003/04/16 12:33

_id	29b8
authors	Hanzl, Malgorzata
year	2002
title	The Role of Virtual City Models in Urban Tissue Evaluation
doi	https://doi.org/10.52842/conf.ecaade.2002.396
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 396-399
summary	The shape of town is the main issue which planners deal with. The function of some buildings and urban facilities is flexible, it changes in time. The appearance of city public areas and, what follows, the life conditions of its inhabitants, depends on elements of the town structure - the surrounding buildings, their density, state and form. All lasting elements of the city form its shape which reflects urban processes which have been taking place over ages. The aim of this paper is to define how latest computer technology can be used as an aid in the evaluation of the town landscape.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f71b
authors	Cuberos, Ricardo and Indriago, Jose
year	2002
title	Hypermedia approaching to digital cities - 3D Maracaibo Project
doi	https://doi.org/10.52842/conf.ecaade.2002.417
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 417-421
summary	This paper relates preliminary experiences creating a comprehensive digital model of a 2 million inhabitant’s city in Venezuela. Applying multiple computer strategies, professors and graduate students are working together in order to get a 22 thousand hectares 3D model of Maracaibo city, the second largest in the country.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0202
id	ddssar0202
authors	Akin, Ömer and Özkaya, Ipek
year	2002
title	Models of Design Requirement
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Case studies show that significant proportions of design errors and failures are linked to poor requirement specification during both early stages of design and as changes occur. Computational requirements engineering as a front-end to design iterations is a promising area addressing theseproblems. In other design disciplines, such as in software engineering, requirement engineering has given significant product improvements. In this paper, we present a state-space representation of requirement models for architectural design. The purpose of requirement modeling in design is tocreate a process by which requirements can be converted into working design solutions through frontend validation. We suggest three models of requirement specification, co-evolutionary [CoM], multiple domain [MDM] and single domain [SDM] models, that can facilitate this effort. Taken together all three models provide a full set of logical permutations of requirement-solution “worlds” and “operations.” We compare each model against the others in terms of facilitating change management and computability.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup0202
id	ddssup0202
authors	Antoni, J.P.
year	2002
title	Urban Sprawl Modelling: Combining Models to Make Decision
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban sprawl is frequently associated with the idea of an unsuitable development, leading to increasing economic, social and environmental problems. Moreover, its control is difficult because multiple patterns (concerning numerous traditional urban planning fields) overlap. In order to understand the sprawl process and to manage its consequences, it must be simplified. The construction of a decision making tool appears then interesting. The GIS-based tool presented here is being developed incollaboration between the urban planning agency of Belfort and the laboratory of geography of Strasbourg. It requires three steps: 1. quantification of the sprawl (how much areas are involved in theurban sprawl process?); 2. location of the sprawl (where are the areas defined in the first step?); 3. differentiation of the sprawl (what are the areas located in the second step?). Of course, the successionof the three stages makes the use of the complete model more complex. So, a global ergonomic user interface is being developed within the GIS, allowing to modify each parameter and to play easily numerous simulations.
series	DDSS
last changed	2003/11/21 15:15

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	bcf7
authors	Arvin, Scott A. and House, Donald H.
year	2002
title	Modeling architectural design objectives in physically based space planning
source	Automation in Construction 11 (2) (2002) pp. 213-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0204
id	ddssar0204
authors	Asanowicz, A.
year	2002
title	Evolution of Media for Early Design Stages
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In this paper the evolution of media used at early design stages will be considered. In traditional methods of searching and presenting the design idea, the basic tool used was the graphic representation. Implementation of new digital techniques in 60s - 70s focused on the mathematical way ofrepresentation. These methods were “not architect friendly” (lack of graphic representation traditionally used by architects). As a result, the development of methods for digital support of form searching was terminated. The computer was used as a tool for drafting. Creative usage of computers for form searching through sketching on the display was extremely difficult. The computer could be described as an “incompatible pencil”. Only in recent years can we see new efforts in this area ofdesign methodology. Thanks to new technical possibilities we have a new chance for changing the process of designing. New kinds of software and hardware let us use the computer not as a pen, but as a medium. In this paper different new ways of form searching will be considered (from very simple method as the scansketches to very complicated ones, such as the generic algorithms). At the end, the influence of new media on the process of design will be presented.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar0205
id	ddssar0205
authors	Batara, A., Dave, B. and Bishop, I.
year	2002
title	Design Decision Support through Translation between Multiple Representations of Spatial Data
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Urban planning and urban design involve collaboration of diverse participants with multiple agendas and multiple criteria. The participants typically use multiple representations of spatial data to derive inferences and insights about the planning problems, leading to a shared decision-making process. To support such multidisciplinary work, this paper proposes a new computational approach and technique for translation between multiple representations of spatial data. This approach is designed to supportdesign decision-making in the interrelated interests of design participants. Prototype implementation and evaluation are conducted to test and validate the proposals.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

For more results click below: