Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 511

Reformat results as: short short into frame detailed detailed into frame

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	8fba
authors	Hui, K.C.
year	2002
title	Free-form design using axial curve-pairs
source	Computer-Aided Design, Vol. 34 (8) (2002) pp. 583-595
summary	Deformation of 3D shapes usually requires the use of a deformation tool. The freeform deformation technique requires the use of a lattice of control point for deforming anobject. This may require a synchronized movement of the lattice control points in order to obtain the desired effects. The axial deformation technique allows an object to bedeformed by manipulating an axial curve. However, unexpected twist of the object may be obtained. This is a result of the lack of control on the local coordinate frame of thecurve. This paper presents a technique for deforming objects with a set of axial curve-pairs. The use of a curve-pair allows the local coordinate frame to be controlledintuitively. A curve-pair is composed of a primary and an orientation curve. The orientation curve is an approximate offset of the primary curve. A technique is proposed formaintaining the relation between the primary and the orientation curve when the curve-pair is adjusted. By associating a complex 3D object to a curve-pair, the object can bestretched, bended, and twisted intuitively through manipulating the curve-pair. This deformation technique is particularly suitable for manipulating complex shapes (e.g.decorative components) in industrial and aesthetic design, and is also suitable for modelling characters and animals with flexible bodies. Adjusting the curve-pair according tosome motion constraints produces different postures of a character or animal model. This in turn can be used as decorative components for aesthetic design.
keywords	Cross-Sectional Design, Sweeping, Axial Curve-Pair, Axial Deformations, Aesthetic Design, Geometric Modelling
series	journal paper
last changed	2003/05/15 21:33

_id	eaea2001_0
id	eaea2001_0
authors	Schmidt, J. Alexander and Schlömer, Natascha (Eds.)
year	2002
title	ENVIRONMENTAL SIMULATION - NEW IMPULSES IN PLANNING PROCESSES
source	Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1, 225 p.
summary	The 5th eaea Conference in Essen yielded four principal findings: • After having been limited to endoscopic picture and film renderings of analog scaled models, the european architectural endoscopy association (eaea) first bridged the gap to digital environmental simulations at this conference. It is not about a better or correct method, but a suitable method of representing the planned reality of a particular project using ways that make sense. The combination of digital and analog simulation media is a source of impetus to the user of both methods. The future belongs to the casespecific application and the numerous integration possibilities of the two different media. • In investigating the perception of pictures produced in both analog and digital form, it was ascertained that it was only after greater effort that the same level of pleasing qualities were achieved in the digital world, compared to pictures of analog scaled models. It seems that for many planning phases model-based pictures are superior to digital photos – with regards to economy, quality of representation and imaginative attributes. This last point seems to be especially important in the draft planning stages: the less sharp a picture is, the more remaining room for viewer interpretation there is. In particular, the high degree of precision characteristic of digital simulations no longer allows room for imagination in the individual viewer. • 3D environmental simulations will increasingly be incorporated with success in architecture and urban design courses at universities and colleges both here in Germany as well as abroad. The further spread of these techniques to other universities and colleges is desirable. Over and above application as a pedagogic tool, the use of these simulations by architects and city planners, private planning agencies and municipal planning administrators will also be in evidence in the future – for checking designs, for informing the involved parties, for establishing the decisions of government bodies, for marketing the project. • Also, the interactive use of endoscopic simulation facilities continually opens new fields of research – whether it be for registering subjective distance perception, whether it be for determining orientation possibilities in open spaces.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	bcf7
authors	Arvin, Scott A. and House, Donald H.
year	2002
title	Modeling architectural design objectives in physically based space planning
source	Automation in Construction 11 (2) (2002) pp. 213-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7798
authors	Barrow, Larry
year	2002
title	Elitism, IT and the Modern Architect Opportunity or Dilemma
doi	https://doi.org/10.52842/conf.acadia.2002.097
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 97-109
summary	Information Technology (IT) is impacting architecture dramatically in process and form. Often thecurrent transformation of architecture is difficult to analyze and frequently we see confusion and anxietyregarding uncertainties for the future of the architect as designer and project leader. The currentpotentiality for new exotic form (i.e. product) is mesmerizing; however, in the current context, lessobvious issues and pertinent questions are emerging for the profession. What is the mission of theprofession? What will keep us relevant in the mist of the new global society?In this paper, we will take an evolutionary perspective of technology in architecture and draw parallelsbetween the Renaissance, which is the genesis of the modern architect, and the contemporary state ofarchitecture. The modern architect was birthed during the Renaissance where we see the retraction ofthe architect from the building site and separation from direct involvement in the building process.Communications technology (i.e. representation in the form of free-hand drawings, mechanical 2Dorthographic drawings and 3D perspectives) enabled the decomposition of the master builder into threecomponents (i.e. artist-designer, practicing_architect, and builder). Thus, we see technology enable thedenigration and ultimate dissolution of the centuries old craftsman guilds and the master builder. Thetechnology evolution of “drawings” enabled monumental change in the process of architecture over thepast five hundred years. The fission of the master builder, enabled by “drawings”, resulted in disparatefactions which are the forerunners of the modern day litigious design-bid-build project delivery. We nowincreasingly see a return to the fusion of design and building where often the architect is not the projectmanager or leader. Thus, the question looms, will the 21st century architect lead or be led, and whatare the ramifications for the profession?The historical Master Builder is re-emerging as a dynamically networked team of design andconstruction knowledge specialists. Bi-lateral knowledge exchange, enhanced with emerging IT, isoccurring between owners, managers, architects, design specialists, engineers, builders and machines.Technology is disrupting architecture, resulting in increasing specialization and compressed timeframes, and may require reevaluation of the role of the architect as project-leader "integrativegeneralist"or "design-specialist".Conclusively, the concept of ‘cybernetic architecture’ is proposed as an IT reference framework. Failureto appropriately respond to societal evolution, driven by technology, could result in the loss ofprofessional status for the modern architect. Herein lies our dilemma, or opportunity, depending on therole choice of the modern architect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ga0237
id	ga0237
authors	Ciao, Quinsan
year	2002
title	Generative Design: Rule-Based Reasoning in Design Process
source	International Conference on Generative Art
summary	As emphasized by Professor Soddu’s series of pioneer works on generative design, the fundamental theoretical base can be generallyconsidered as a design process that generates design by the initiation, developing and manipulation with designers’ objectives as well as theirassociated set of rules. This process is, in a broad sense, a reasoning process that follows the rules being set forth. In many cases, the rules arecommon logic that governs our reasoning, while in others they are more special rules that restrict the generating process to a confined space.Computer assisted generative design has made impressive progress over the past decade, along with the rapid growing capacity and speed ofcomputers as well as development and discovery of rules, rule setting and effective manipulating schemes and algorithms. After manyimpressive progress and remarkable results has demonstrated from time to time, however, theoretical foundation of such design approach, orthe significance of awareness of such approach has not been thoroughly treated, recognized and discussed, not to mention clearly understood.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2006_613
id	caadria2006_613
authors	JAEHO RYU, NAOKI HASHIMOTO, MAKOTO SATO, MASASHI SOEDA, RYUZO OHNO
year	2006
title	A GAME ENGINE BASED ARCHITECTURAL SIMULATOR ON MULTI-PROJECTOR DISPLAYS
doi	https://doi.org/10.52842/conf.caadria.2006.x.m1v
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 613-615
summary	To make whole one image on screens that is generated by many computers and synchronization among computers, there is a need for a network software environment for multi-projector display system. Although the development costs increase for parallel programming for multi-projector display system, there is a possibility that the program cannot be executed at an enough speed since the network bandwidth might become a bottleneck. There are some software environments for that kind of multi-projector display system like Chromium that is latest version of WireGL (Humphreys, 2001&2002). WireGL is a kind of Client-Server Model, which one rendering server sends the data of rendering to many computers. While it can use the application without modification of source, it requires heavy network traffics. The other type of operating software is VR Juggler (Cruz-Neira, 2002), and CAVE Library that is a kind of Master-Slave Model. In the Master-Slave Model, every computer has same application programs to render the image that only keep the synchronization of rendering and events. But, these programs require a specialized skill and knowledge to modify the source of program for the certain rendering PC-Cluster system.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ga0215
id	ga0215
authors	Kabala, Joanna
year	2002
title	The Side Effect of a Generative Experiment
source	International Conference on Generative Art
summary	This paper discusses the issue expressed in the call for the Generative Art 2002 conference that says: "GA is identifiable as one of the most advanced approaches in creative and design world." In this paper the value of Generative Art for the art, science and design worlds is described in the reference to a generative experiment. The experiment has been conducted in industrial environment with the aim of defining possibilities for natural interaction of humans with machines. In specific, the experiment examined an option for visual adaptation in accordance to user feedback. In the context of the experiment's outcome the issue of recognizability of Generative Art values is discussed. Generative Art can be identified but is not widely recognized as "one of the most advanced approaches in creative and design world". What makes it difficult for designers to switch to generative thinking and accept immediately Generative Art as the possible way of advancing traditional design methods? And what makes it promising to keep searching for ways of application of Generative Art in contemporary design? Some possible answers, proposed in this paper, aim at contributing to the discussion about the changing role of artists and designers in the contemporary society.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	24eaea2001
id	24eaea2001
authors	Ohno, R., Katayama, M., Komatsuzaki, T. and Soeda, M.
year	2002
title	Development of a Visual Simulation System Synchronized with Walking Motion - An application for a study of distance perception
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	Conventional visual simulators allow observers to move in the simulated space by using a mouse or a joy-stick without the kinesthetic feeling of motion. However, the link between visual image and body motion is important to perceive the environment, especially when people are walking. In this paper, a visual simulation system was designed to synchronize the subject's walking motion on a treadmill with the video image shown on a HMD. In order to detect the walking motion, sensors were attached to both subject’s ankles. According to the detected motion, the treadmill rotates and a CCD camera moves in a model space. Because of the sensors’ low sensitivity and the time lag between the detected motion and treadmill rotation, the subjects couldn’t walk smoothly. Therefore, the walking speed which synchronizes with the video image was kept constant for each subject and the experimenter started up and stopped the simulator. The validity of this simulation system was examined by comparing the accuracy of distance estimation using the new simulator with that using the conventional system without walking motion. The “distance reproduction” method was applied to measure the perceived distance: subjects walked 25 meter in a real setting without being told the distance, and were asked to move the same distance in different conditions. Since the distance estimation became accurate in the condition with the walking motion, the validity of this simulator was secured. The following experiment was intended to investigate the influence of physical environmental features on perceived distance by using the simulation system. We operated some features using a scale model of a route and examined their influences. Subjects were asked to "walk" through a path consisted of two spaces with different physical features, and to respond by showing the proportion of the length of those two spaces. The result revealed that the distance of a narrower and lower ceiling path where people perceive clearer line perspective and faster optical flow tends to be perceived longer.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	1992
authors	Russell, Peter
year	2002
title	Using Higher Level Programming in Interdisciplinary teams as a means of training for Concurrent Engineering
doi	https://doi.org/10.52842/conf.ecaade.2002.014
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 14-19
summary	The paper explains a didactical method for training students that has been run three times to date. The premise of the course is to combine students from different faculties into interdisciplinary teams. These teams then have a complex problem to resolve within an extremely short time span. In light of recent works from Joy and Kurzweil, the theme Robotics was chosen as an exercise that is timely, interesting and related, but not central to the studies of the various faculties. In groups of 3 to 5, students from faculties of architecture, computer science and mechanical engineering are entrusted to design, build and program a robot which must successfully execute a prescribed set of actions in a competitive atmosphere. The entire course lasts ten days and culminates with the competitive evaluation. The robots must navigate a labyrinth, communicate with on another and be able to cover longer distances with some speed. In order to simplify the resources available to the students, the Lego Mindstorms Robotic syshed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).ural presentations in the medium of computer animation. These new forms of expression of design thoughts and ideas go beyond mere model making, and move more towards scenemaking and storytelling. The latter represents new methods of expression within computational environments for architects and designers.its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosg and programming a winning robot. These differences became apparent early in the sessions and each group had to find ways to communicate their ideas and to collectively develop them by building on the strengths of each team member.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	ga0224
id	ga0224
authors	Tarabella, Leonello
year	2002
title	pCM (pure C Music): a real-time music language
source	International Conference on Generative Art
summary	In order to put to work the facilities offered by the gesture interfaces realised at cART project of CNR, Pisa, I started writing basic libraries for processing sound and for driving the gesture interfaces. In the long run the framework became a very efficient, stable and powerful “music language” based on pure C programming, that is “pure-C-Music”, or pCM. This programming environment gives the possibility to write a piece of music in terms of synthesis algorithms, score and management of data streaming from gesture interfaces. The pCM framework falls into the category of the “embedded music languages” and has been implemented using one of the most popular C compilers or better, multiplatform development systems: Metrowerks’ Code Warrior. As a result a pCM composition consists of a CW project which includes all the necessary libraries, including a DSP.lib consisting of a number of functions able to implement in real-time the typical synthesis and processing elements such as oscillators, envelope shapers, filters, delays, reverbs, etc. The composition itself is a C program consisting, mainly, of the Orchestra() and Score() functions. Everything here is compiled into machine code and runs at CPU speed.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	e80d
authors	Szewczyk, Jaroslaw
year	2002
title	Architectural Meaning in the Existing Architectural Notations - The Technologies for Interoperable Architectural Data Management
doi	https://doi.org/10.52842/conf.ecaade.2002.230
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 230-237
summary	The paper presents results of investigations upon possible representations of architectural objects containing ‘architectural meaning’. Five groups of such existing representations are analyzed briefly: (1) structural EXPRESS–based definitions, (2) object EXPRESS- and IFC- based notations, (3) XML-based notations, (4) experimental ones, and (5) binary notations. The working taxonomy of the notations is presented and their shortcomings are mentioned. The potential of XML notations for CAD data has been recognized by software vendors and standard organizations all over the world. Many corporations and standardization bodies are developing XML-based notations of CAD data, focusing on interoperability problems. Some of these notations are becoming standards (aecXML, i-drop), influencing the development of all CAAD industry. There are some main groups of problems with the existing commercial standards: Lack of ‘open’ data in its ‘open’ context, lack of architectural meaning in commercial notations, problems with simpler intuitive standards for notation of conceptual design data in early design stages, too complex data semantics, too atomized data, and richness of the data structures. The problems are taken under consideration in order to discuss the present state of architectural standards. Nowadays architects are forced to work with semi-architectural notations, lacking their essence, i.e. lacking methods to describe elements of cultural heritage connected to geometry forms. Instead of language of architecture they deal with virtual cyber-slang.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	8780
authors	Abdelhameed, W., Ozel, F., Addelatiff, M. and Daef, A.
year	2002
title	Assessment of the Impact of Digital-Manual Media Types on the Basic Design Capabilities of Architects: A Proposed Framework and Directive Measures
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 275-276
summary	The research attempts to defi ne and classify the design capabilities of architects into a basic framework. This defi nition will be useful in understanding and determining the types and nature of impact introduced by digital and manual media used during architecturaldesign process. The research consists of three parts. The First part reviews the main stages, tasks and activities of the architectural design process. The second part builds the proposed framework of design capabilities relating them to the specifi c tasks and activities conductedby the architect along the design process. The third part proposes some useful measures as to how to make use of the proposed framework in assessing the impact of media on the design capabilities of architects.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ddssar0201
id	ddssar0201
authors	Achten, H.H.
year	2002
title	Requirements for Collaborative Design in Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The concept of collaborative design has recently come under renewed attention in the field of computer aided architectural design support. Although collaborative design deals with the same aspects of cooperation by various participants in the design process as previously studiedin, for example, concurrent engineering and multi-disciplinary design, it nevertheless puts a different research emphasis. Collaborative design looks at how the process can be improved in such a way that collaboration –working together in a manner to enhance each participants contribution to the design– emerges from the process. In engineering design practice, thismeans a shift forward in the design process where engineers are asked earlier for their input in the design solution. For CAAD research, the phenomenon of collaborative design poses the question how design tools and environments can be made in such a way that collaboration will occur. In this paper, the aims is to describe the concept of collaborative design in architecture, and to give an outline of the perceived requirements in the organisation of design and Computer Aided Design Support to achieve collaborative design.
series	DDSS
last changed	2003/11/21 15:15

_id	ba50
authors	Achten, Henri and Jessurun, Joran
year	2002
title	An Agent Framework for Recognition of Graphic Units in Drawings
doi	https://doi.org/10.52842/conf.ecaade.2002.246
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 246-253
summary	Architects use graphic conventions in their drawings that have meaningful content to the design task. In previous work, such well-defined sets of graphic entities have been identified and defined. These sets are called graphic units. In this paper, we discuss how graphic unit recognition in drawings can take place using a multi-agent systems approach. This approach seems promising as singular agents may specialize in graphic unit-recognition, and multi-agent systems can address problems of ambiguity through negotiation mechanisms. We present an agent framework for this purpose, how it connects to the theory of graphic units, and how agents for recognizing graphic units are defined. The paper ends with a discussion of current findings and future work.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	765f
authors	Adam, Holger
year	2002
title	Reinterpretation or replacement? The effects of the information and communication technologies on urban space
source	CORP 2002, Vienna, pp. 345-349
summary	The timid question “Virtual spaces or real places?” forms the core of many debates within the spatial sciences addressing theconsequences of the rapid development of information and communication technologies1 on existing spatial structures. So far several opinions rival each other for the interpretation of current and the prediction of future spatial developments. The spacelessness ofcomputer networks and the possibility to transmit data in real-time have lead visionaries to predict a far-reaching devaluation of timeand space, so questioning the future importance of traditional spatial structures: The “annihilation of distance and time constraints [incomputer networks] could undermine the very rationale for the existence of the city by dissolving the need for physical proximity”(Graham and Marvin 1996: 318). The disappearance of the city into the net, therefore, seems to become a distinct possibility.
series	other
email
more	www.corp.at
last changed	2003/11/21 15:15

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	461b
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2002
title	The Role of Advanced VR Interfaces in Knowledge Management and Their Relevance to CAD
doi	https://doi.org/10.52842/conf.caadria.2002.277
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 277-284
summary	This paper introduces knowledge management and computer aided visualisation as a key in establishing both valuation and value creation capabilities in the enterprise where dissemination of knowledge and effective sharing of information through collaboration spur creativity and stimulate business practices. The paper draws an original approach for the design and development of a universal information/knowledge visualisation tool and outlines the mechanics that enable the working prototype that focuses on CAD.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: