Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 441

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0207
id	ddssar0207
authors	Conti, G. and Ucelli, G.
year	2002
title	A Java3D Tool for Real-Time Collaboration in a Virtual Reality CAADEnvironment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today the development of network-based virtual communities and the use of avatars have brought a new level of complexity to the meaning of virtuality, providing the technology for remote presence and collaborative experiences. In this project the intention was to pursue this articulated vision of VR in order to assist the design profession during the early stages of the design process. The objective was to provide a tool that is capable of creating 3D shapes in a shared VR environment, thus allowing thedesign and its evolution to be shared. The use of the Java programming language was a natural choice for this project. Because of Java’s performance scalability and hardware independence the concept ofCAAD has been extended, making it possible to create a VR environment that can co-exist between high-end supercomputers and standard PCs. The project is currently being tested using PCs and an SGI system running a Reality Centre. The research reported in this paper describes the architecture and application of software that aims to increase the opportunity for collaboration within virtual worlds and enable effective and transparent information exchange.
series	DDSS
last changed	2003/08/07 16:36

_id	d9de
authors	Fukuda, T., Nagahama, R., Kaga, A. and Sasada, T.
year	2002
title	Collaboration Support System for City Plans or Community Designs Based on VR/CG Technology
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 257-264
doi	https://doi.org/10.52842/conf.caadria.2002.257
summary	This paper reports the collaboration support system for city plans or community designs based on virtual reality (VR) or computer graphics (CG) technology. This time we report to elaborate the extended potable VR equipment and expression method with CG to allow for the realistic viewing of night scenes, and apply to real projects.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_613
id	caadria2006_613
authors	JAEHO RYU, NAOKI HASHIMOTO, MAKOTO SATO, MASASHI SOEDA, RYUZO OHNO
year	2006
title	A GAME ENGINE BASED ARCHITECTURAL SIMULATOR ON MULTI-PROJECTOR DISPLAYS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 613-615
doi	https://doi.org/10.52842/conf.caadria.2006.x.m1v
summary	To make whole one image on screens that is generated by many computers and synchronization among computers, there is a need for a network software environment for multi-projector display system. Although the development costs increase for parallel programming for multi-projector display system, there is a possibility that the program cannot be executed at an enough speed since the network bandwidth might become a bottleneck. There are some software environments for that kind of multi-projector display system like Chromium that is latest version of WireGL (Humphreys, 2001&2002). WireGL is a kind of Client-Server Model, which one rendering server sends the data of rendering to many computers. While it can use the application without modification of source, it requires heavy network traffics. The other type of operating software is VR Juggler (Cruz-Neira, 2002), and CAVE Library that is a kind of Master-Slave Model. In the Master-Slave Model, every computer has same application programs to render the image that only keep the synchronization of rendering and events. But, these programs require a specialized skill and knowledge to modify the source of program for the certain rendering PC-Cluster system.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	d5ac
authors	Kalisperis, L.N., Otto, G., Muramoto, K., Gundrum, J.S., Masters, R. and Orland, B.
year	2002
title	Virtual Reality/Space Visualization in Design Education: The VR-Desktop Initiative
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 64-71
doi	https://doi.org/10.52842/conf.ecaade.2002.064
summary	Although virtual reality (VR) is a fast-growing field, utilization of its potential within an affordable environment in the early years of architectural education has been limited. Currently, we are in the process of exploring the educational potential of virtual reality in the creation and understanding of space as a set of dynamic volumes that can be experienced. The VR-Desktop initiative is an effort to bring the salient features of projection-based VR to second-year architecture students in a way that is more generally accessible than the many canonical, first-generation, projection-based VR systems. The VR-Desktop has been implemented in the teaching of the architectural design studio in the second year of a fiveyear curriculum, as part of the physical architectural studio. Through the VR-Desktop system in the studio, students immediately start working in an immersive environment. They create space by manipulating solids and voids while evaluating the anthropometric relations of the proposed solution. The students are able to study and test conceptual details in a virtual environment from the very beginning of their architectural design project. In order to assess student perception of the usefulness of various system attributes for diverse tasks, we have begun a usability study. Thirty-five surveys were collected from the students who had used the lab during the two semesters for which the two-screen system was available. Preliminary observations indicate that within the architectural context, virtual reality techniques involving depth perception can convey relevant information to students more efficiently and with less misrepresentation than traditional techniques. This paper suggests that full field of view, motion, stereoscopic vision, and interactivity are possible components of the 3D visualization techniques that are necessary to enhance architectural education
series	eCAADe
email
last changed	2022/06/07 07:52

_id	f1a5
authors	Petric, J., Ucelli, G. and Ucelli, G.
year	2002
title	Real Teaching and Learning through Virtual Reality
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 72-79
doi	https://doi.org/10.52842/conf.ecaade.2002.072
summary	This paper addresses an articulated vision of Virtual Reality which lends itself to design collaboration in teaching, learning and communication of architectural design ideas among students, design professionals and client body during the early stages of the design process. Virtual Reality (VR) has already acquired a new degree of complexity through development of network-based virtual communities and the use of avatars. The intrinsic quality of VR technology is to support collaborative design experience. The design tools developed for this experiment are capable of creating 3D objects in a shared VR environment, thus allowing the design and its evolution to be shared. The choice of programming language (JavaTM) reflects the desire to achieve scalability and hardware independence, which in turn allows for creation of a VR environment that can co-exist between high-end supercomputers and standard PCs. The prototype design environment was tested using PC workstations and an SGI system running a Reality Centre. The research and teaching/learning experience in the collaborative design environment reported in this paper describe the development and application of software that aims to increase the opportunity for architects to collaborate within virtual worlds which enable effective and transparent information exchange.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
doi	https://doi.org/10.52842/conf.caadria.2002.151
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ga0211
id	ga0211
authors	Gartland-Jones, Andrew
year	2002
title	Can a Genetic Algorithm Think Like a Composer?
source	International Conference on Generative Art
summary	There has now been a substantial body of work utilising Genetic Algorithms (GA) for the purpose of musical composition. A common point of discussion is how far GA’s can simulate not just the musical output of human composers, but also the process of composing itself. This paper begins by discussing the suitability of using a GA for composition, and goes on to describe a generative music system (by the author), that utilises a domain specific, knowledge rich GA. The system acts on a supplied 2-bar musical phrase (up to 4 parts), and evolves musical fragments towards a supplied target. The aim is to provide interim points on the evolutionary path, which represents a ‘new’ musical ideas audibly based on the supplied fragments. The paper concludes that the system is able to model at least part of the creative process of composition, and is effective at producing musically successful results. (Audio download sources of its output are included to support this conclusion). The system was used to generate music included in an interactive installation work, exhibited at Brighton Arts Festival 2002, and other applications under developed that use the algorithm are discussed.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddssup0216
id	ddssup0216
authors	Saarloos, D.J.M., Arentze, T.A., Borgers, A.W.J. and Timmermans, H.J.P.
year	2002
title	Towards a Local Planning Support System,Introducing the MASQUE Framework
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	Urban planning is an important instrument for improving the quality of life, but it is hampered by the fact that the effects of many decisions, to be made by the planner, are practically unknown or at best unclear. The high level of complexity, uncertainty and subjectivity involved in urban plan development is seriously troubling the planner. One way of facilitating the plan development process, and potentially improving the decision-making, is developing a Planning Support System (PSS) that combines artificialintelligence with a gamut of computational tools that support the process. At the Eindhoven University of Technology a research program is conducted to develop such a system for local urban planning in the Netherlands. The system, named MASQUE (Multi-Agent System for supporting the Quest forUrban Excellence), applies Multi-Agent technology to incorporate multidisciplinary expertise on both tools and domains as well as to enable intelligent guidance and assistance towards the user. Strong emphasis is put on the scenario-based way of working that is common in urban planning. This paper puts forward the difficulties faced in local planning practice and discusses the possibilities for computer-assistance. This finally resolves into the introduction of the MASQUE framework, describing how the system is organized and how the agents will be involved.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	0653
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and Rendering Virtual Architecture by Using Fisheye-Panorama-Based Images and Lightings in HDR-Quality
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 172-174
summary	We use digitally made spherical panoramas as background for vr visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirror-based). For this reason we had the idea to develop the first fisheye-based digitalscanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic-range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) spericalimages together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	a207
authors	Czerner, Jürgen and Gatermann, Harald
year	2002
title	Modeling and rendering virtual architecture by using fisheye-panorama-based images and lightings in HDR-quality
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 569-571
doi	https://doi.org/10.52842/conf.ecaade.2002.569
summary	We use digitally made spherical panoramas as background for vr-visualisation in architectural sceneries instead of stitched photographs (fisheye-based or serical-mirrorbased). For this reason we had the idea to develop the first fisheye-based digital-scanning panorama-camera together with the manufacturer Spheron. The ultimate step in reaching optimal quality not only as a background but also as a source of lighting the background-image is taken as a HDR-image. The high-dynamic- range-technology was developed by the Californian scientist Paul Devebec. High dynamic photographs contain a broader range of information between the very bright zones down to the very dark zones - a lot more than “normal” photographs (digital and analogue), which are named LDR (low dynamic range in comparison to HDR). Some software-products in the field of cad-visualisation in virtual and augmented reality already enable the use of HDR-images and open a new field of controlling daylight and artificial light simulations with photographed backgrounds instaed of synthetic ones. The combination of digitally produced (scanned) sperical images together with the use of HDR open a wide range of new implementation in the field of architecture, especially in combining synthetic elements in existing buildings, e.g. new interior elements in an existing historical museum).
series	eCAADe
email
last changed	2022/06/07 07:56

_id	3ffc
authors	Kalisperis, L., Otto, G., Muramoto, K., Gundrum, J., Masters, R. and Orland, B.
year	2002
title	An Affordable Immersive Environment in Beginning Design Studio Education
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 47-54
doi	https://doi.org/10.52842/conf.acadia.2002.047
summary	This paper presents work exploring the potential of virtual reality (VR) within an affordable environmentin the early years of architectural education has been limited. Through an immersive environmentsystem in the studio, students create space by manipulating solids and voids while evaluating theanthropometric relations of the proposed solution. The students are able to study and test conceptualdetails in a virtual environment from the very beginning of their architectural design project.We carried out a usability study in order to assess student perception of the usefulness of varioussystem attributes for diverse tasks. Thirty-five surveys were collected from the students who had usedthe system. Observations indicate that within the architectural context, virtual reality techniquesinvolving depth perception can convey relevant information to students more efficiently and with lessmisrepresentation than traditional techniques.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	b6f7
authors	Morozumi, M., Sueshige, Y., Uchiyama, T. and Inoue, S.
year	2002
title	Linked QTVR System for SimulatingCitizens’ Strolling Around Activities
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 217-227
doi	https://doi.org/10.52842/conf.acadia.2002.217
summary	This paper discusses a city model using the linked QTVR (cylinder-VR) technique to study relationshipsbetween people’s behavior while strolling around downtown shopping districts, and visual stimuli in eachpart of the district. At the beginning of the study, because a large city model was required, a majorobstacle was the necessity of taking a large number of photographic images of the area, especiallyimages with wide vertical view angles. The objectives of this paper are to: (a) discuss the major featuresof the simulation system and its uses for the study, (b) discuss a refined method of producing acylindrical image of QTVR allowing the operator to look up almost 56 degrees, and (c) evaluate theperformance of the developed system through experiment by 30 university students who know thedistrict well.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	3439
authors	Paranandi, M. and Sarawgi, T.
year	2002
title	Virtual Reality on Architecture: Enabling Possibilities
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 309-316
doi	https://doi.org/10.52842/conf.caadria.2002.309
summary	This paper examines the potential of Virtual Reality (VR) technologies for architectural applications. There has been a great deal of anticipation for its implications for architecture since Ivan Sutherland's first VR system in the 60's. The term VR was formalized and became popular in the main stream in the late 80's and became an industry by the late 90's. Although it has found good applications in Medicine, Flight Simulation, and Video Game Industry, its effect on architecture remains imperceptible. In the work that we review, we found that the success of VR in architecture has primarily been in the passive and exploratory applications. We also note that at the present time, the cost of VR systems is directly proportionate to the level of photorealism and immersion. We contend that photorealistic visualization and total immersion are not absolute prerequisites for making most design decisions. Hence, through this paper we bring to light the inherent promise of VR technology and the potential impact it could have with its current limitations, on the way we conventionally think and design our built environment pushing it beyond space and time constraints.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	12d9
authors	Anumba, C.J., Ugwu, O.O., Newnham, L. and Thorpe, A.
year	2002
title	Collaborative design of structures using intelligent agents
source	Automation in Construction 11 (1) (2002) pp. 89-103
summary	The construction industry has a long tradition of collaborative working between the members of a construction project team. At the design stage, this has traditionally been based on physical meetings between representatives of the principal design disciplines. To aid these meetings, the information and communications technologies that are currently available have been utilised. These have yielded some success but are hampered by the problems posed by the use of heterogeneous software tools and the lack of effective collaboration tools that are necessary to collapse the time and distance constraints, within which increasingly global design teams work. In particular, there are very few tools available to support distributed asynchronous collaboration. Distributed artificial intelligence, which is commonly implemented in the form of intelligent agents, offers considerable potential for the development of such tools. This paper examines some of the issues associated with the use of distributed artificial intelligence systems within the construction industry. It describes the potential for the use of agent technology in collaborative design and then goes on to present the key features of an agent-based system for the collaborative design of portal frame structures. An example is presented to demonstrate the working and benefits of the prototype system, which makes a significant contribution by allowing for peer to peer negotiation between the design agents.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	bcf7
authors	Arvin, Scott A. and House, Donald H.
year	2002
title	Modeling architectural design objectives in physically based space planning
source	Automation in Construction 11 (2) (2002) pp. 213-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0206
id	ga0206
authors	Biles, John A.
year	2002
title	GenJam in Transition: from Genetic Jammer to Generative Jammer
source	International Conference on Generative Art
summary	GenJam, short for Genetic Jammer, is an evolutionary computation (EC) based software agent that models a jazz improviser. Recently GenJam has evolved away from its roots as an interactive genetic algorithm toward its current state as an autonomous generative system. GenJam has retained its chromosome-based representations and mappings, its intelligent selection, crossover and mutation operators, and its real-time interactive performance capabilities. However, it no longer needs any explicit representation of fitness, which arguably makes it no longer an EC system. This paper considers GenJam as a generative art system. Generative art produces “unique and non-repeatable events” that express a designer’s generating idea. The designer’s generating idea defines a species of events, represented in a genetic code. In music, these events could be individual notes, melodic phrases, even entire pieces. In GenJam the events are four-measure phrases, or “licks” in the jazz vernacular. The format for the genetic code, then, defines a species space from which unique individual events can be generated. Uniqueness is important in jazz because improvisation must be spontaneous and “new.” Hence, improvisation is tailor-made for the generative art paradigm, and in fact, one could argue that improvisation is, by definition, the purest example of generative art applied to music. In other words, generative music is improvisation, and GenJam is the Generative Jammer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:16

_id	077a
authors	Boucard, D., Huot, S., Colin, Ch., Hégron, G. and Siret, D.
year	2002
title	An Image-based and Knowledge-based System for Efficient Architectural and Urban Modeling
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 229-238
doi	https://doi.org/10.52842/conf.acadia.2002.229
summary	In this paper, we present two user-centered systems aiming at making easier the modeling ofarchitectural and urban scenes by using two different but complementary approaches. The first oneMArINa, an image-based modeler, allows the user to reconstruct urban scenes from one or moregraphical documents. This method focuses more on reconstructing models and is more dedicated tothe production of 3D sketches. The second modeler, MArCo is a knowledge-based modelercontaining the know-from and know-how on classical architecture. It allows the user to modelclassical architectural scenes verifying automatically all the domain rules. Finally, we show howMArINa and MArCo can cooperate providing the user a tool combining efficiently their respectivecapabilities.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	b13d
authors	Broek, J.J., Horváth, I., Smit, B. de, Lennings, A.F., Rusák, Z. and Vergeest, J.S.M.
year	2002
title	Free-form thick layer object manufacturing technology for large-sized physical models
source	Automation in Construction 11 (3) (2002) pp. 335-347
summary	Large-sized free-form objects of different materials are widely used in various industrial applications. Currently, layered rapid prototyping technologies are not suitable for the fabrication of this kind of objects, due to the necessity of a large number of layers and the limitations in size. This paper reports a novel approach of layered manufacturing that is more appropriate for the fabrication of these large objects. A method of thick-layered object manufacturing is presented, which is based on a higher order approximation of the shape and application of a flexible curved cutting tool.The method allows the production of physical prototypes, which need little or no finishing. In order to meet the designer's intend, as closely as possible, some feasible system characteristics are introduced. The process is ordered in a sequential way and provides a highly automated process. A hierarchical decomposition of the CAD geometry takes place into components, segments, layers and sectors, based on morphological analysis. This method enables the manufacturing and the re-assembly of the parts to produce the physical prototypes without affecting the requested functionality. Due to the possibility of obtaining multiple solutions in the physical model, much attention must be paid to the efficiency of the process.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	bbb6
authors	Chase, Scott C.
year	2002
title	A model for user interaction in grammar-based design systems
source	Automation in Construction 11 (2) (2002) pp. 161-172
summary	Grammar-based production systems are considered potentially powerful design tools by their ability to generate sets of designs adhering to user-specified constraints. However, development of such tools has been slow, partly because of the lack of good interaction between user and system. This paper describes modes of user interaction and control possible with grammar-based design systems and presents issues to be examined in the development of models that represent the locus of interactions possible with such systems. The examination of existing grammar-based systems provides empirical evidence to support the validity of such models.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: