Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	c8df
authors	Issa, Rajaa and Moloney, Jules
year	2002
title	The Potential of Computer Modeling Software to Support a Consideration of Building Materials in Architectural Design Education
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 440-447
doi	https://doi.org/10.52842/conf.ecaade.2002.440
summary	Most CAAD software in use for architectural education relies heavily on abstract geometry manipulation to create architectural form. Building materials are usually applied as finishing textures to complement the visual effect of the geometry. This paper attempts to investigate the limitations of commonly used CAAD software in terms of encouraging an intuitive thinking about the physical characteristics of building materials in the design studio environment. A case study involving 90 students is presented. The possibility of developing software that uses geometrical abstractions of different materials as the basis for modeling architectural form in the design studio is introduced.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4544
authors	Morozumi, M., Shimokawa, Y. and Homma, R.
year	2002
title	Schematic design system for flexible and multi-aspect design thinking
source	Automation in Construction 11 (2) (2002) pp. 147-159
summary	A designer-friendly CAD for a schematic design is one of the important topics of CAD studies. There were attractive preceding studies aiming to develop a CAD that intended to enable designers to have flexible design thinking and interactively manipulate representation models. This paper has the same goals of study, but focuses on the needs to support flexible and multi-aspect design thinking. Though designers normally hope to elaborate on their ideas using separate sets of representation models suitable for respective studies, a present CAD that is designed to build a single set 3D model, has limited its ability as a tool for a schematic design. Assuming this as the base concept, authors have studied to develop a prototype of a schematic design system, customizing AutoCAD R14J: Schematic Design System '98 (SDS'98). It has convenient utilities both for building separate sets of representation models and for integrating and reconciling those models to build a single consolidate model. This paper discusses the common procedures of schematic design studies, necessary functional features for SDS, a case study of the system use, and finally, the advantages and the disadvantages of the proposed system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4f57
authors	Nikiforiadis, Faidon and Pitts, Adrian
year	2002
title	A Study of the Accuracy of Daylighting Simulation of Heavily Obstructed Buildings in the Urban Canyons of Athens
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 456-463
doi	https://doi.org/10.52842/conf.ecaade.2002.456
summary	This paper deals with the use and evaluation of daylighting simulation tools in relation to a complex urban environment. The environment concerned is one commonly found in city centre areas where the proximity of buildings leads to the creation of ‘urban canyons’; the result of this is that assessment and simulation of daylight requires a more sophisticated approach than for other situations. In urban areas building layout is the most important factor effecting daylight, sunlight and solar heat gain reaching a building. It also affects sunlight in open spaces, ventilation, shelter and the dispersal of pollutants. In order to produce a more realistic understanding of the dynamic effects of daylight, there is a need not only for the research and development of advanced CAD and lighting simulation tools, but also of the study of possible alternative methods in their application. In the work reported in this paper, an attempt has been made to move the focus of lighting and daylighting simulation from the scale of a room to that of a whole building; the building itself being surrounded by its specific urban environment (including its microclimate). The study evaluates if there is sufficient evidence that it is possible with such complexity to reach reliable computation results after executing the simulation. The case study presented uses a 4D model of an urban canyon to investigate the sensitivity of such a complex simulation system. It can also be used to find ways to analyse and predict how daylight is reflected, refracted, scattered, diffused, polarised, diffracted and absorbed as it traverses an urban environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	046e
authors	Burry, Mark
year	2002
title	Rapid prototyping, CAD/CAM and human factors
source	Automation in Construction 11 (3) (2002) pp. 313-333
summary	CAD/CAM techniques for rapid prototyping, profile cutting, and form sculpting/routing/moulding are well-advanced for the vehicle and manufacturing industries. Although their migration to the building sector is readily achievable as a substitution for much of traditional construction, there are factors that work against this. Apart from the singular `one-off' nature of most architectural projects that limits ready exploitation of techniques derived in the main for mass-manufacture, there remains the problem of apprenticeship, and how to maintain a healthy lineage of skills for work otherwise less readily taken-up using automated manufacturing procedures. Continuing construction for Gaudí's Sagrada Família Church in Barcelona has provided a fertile test-bed for integrating rapid prototyping and CAD/CAM production where appropriate. Nevertheless, human factors such as maintaining the status quo with regard to apprenticeship and maintaining the skill lineage have provided some healthy insights into both the risks as well as the opportunities for greater involvement with CAD/CAM, and in particular, rapid prototyping in the building construction sector. This paper reports on and discusses the findings of case studies from the Sagrada Família Church project.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	82ac
authors	Caldas, Luisa Gama and Norford, Leslie K.
year	2002
title	A design optimization tool based on a genetic algorithm
source	Automation in Construction 11 (2) (2002) pp. 173-184
summary	Much interest has been recently devoted to generative processes in design. Advances in computational tools for design applications, coupled with techniques from the field of artificial intelligence, have lead to new possibilities in the way computers can inform and actively interact with the design process.In this paper, we use the concepts of generative and goal-oriented design to propose a computer tool that can help the designer to generate and evaluate certain aspects of a solution towards an optimized behavior of the final configuration. This work focuses mostly on those aspects related to the environmental performance of buildings.Genetic Algorithms (GAs) are applied as a generative and search procedure to look for optimized design solutions in terms of thermal and lighting performance in a building. The GA is first used to generate possible design solutions, which are then evaluated in terms of lighting and thermal behavior using a detailed thermal analysis program (DOE2.1E). The results from the simulations are subsequently used to further guide the GA search towards finding low-energy solutions to the problem under study. Solutions can be visualized using an AutoLisp routine.The specific problem addressed in this study is the placing and sizing of windows in an office building. The same method is applicable to a wide range of design problems like the choice of construction materials, design of shading elements, or sizing of lighting and mechanical systems for buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	24d3
authors	Ham, J.J., Anson, S., Datta, S. and Skates, H.
year	2002
title	The Construction Primer in Case-Based E-ducation: The Deakin Woolstores Case Study
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 130-133
doi	https://doi.org/10.52842/conf.ecaade.2002.130
summary	This paper outlines the use of an online multimedia case study of the Deakin University Woolstores campus in design and construction learning. The case study, in its pilot form, serves three purposes: as a case-based primer for the study of design and construction technology, as a structured case-study container for the addition of student digital construction projects and to benchmark student digital construction projects. The case study utilizes 3D CAD models and web-based multimedia in concert with physical connection with the actual building to build wholistic understandings of the transition of an idea to a constructed reality.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	3071
authors	Kuenstle, Michael W.
year	2002
title	Escarpment Study in a Virtual Flow Environment A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations [Escarpment Study in a Virtual Flow Environment. A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 167-171
summary	This paper documents the progress of research to investigate the integration of 3-dimensional computational modeling techniques into wind mitigation analysis and design for building structures located in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application case study for asimulated “3-second gust” hurricane force wind flow over a low rectangular building located in a coastal region of south Florida. The case study project models the wind flow behavior and pressure distribution over the building structure when situated in three varying conditions within a single terrain exposure category. The simulations include three-dimensional modeling of the building type constructed (1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and (3) ongradedownwind of an escarpment. The techniques and parameters for development of the simulations are discussed and some preliminary interpretations of the results are evaluated by comparing their predictions to existing experimental and analytical data, with special attention paid to the numerical methods outlined in the American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures, ASCE 7-98.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ed3c
authors	Kuenstle, Michael W.
year	2002
title	Escarpment Study in a Virtual Flow Environment: A Comparative Analysis of a Single Building Type Modeled in Varying Topological Situations
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 239-247
doi	https://doi.org/10.52842/conf.acadia.2002.239
summary	This paper documents the progress of research to investigate the integration of 3-dimensionalcomputational modeling techniques into wind mitigation analysis and design for building structureslocated in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flowand wind pressure as well as their translation into design criteria for structural analysis and design arereviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application casestudy for a simulated "3-second gust" hurricane force wind flow over a low rectangular building locatedin a coastal region of south Florida. The case study project models the wind flow behavior and pressuredistribution over the building structure when situated in three varying conditions within a single terrainexposure category. The simulations include three-dimensional modeling of the building type constructed(1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and(3) on-grade downwind of an escarpment. The techniques and parameters for development of thesimulations are discussed and some preliminary interpretations of the results are evaluated bycomparing their predictions to existing experimental and analytical data, with special attention paid tothe numerical methods outlined in the American Society of Civil Engineers, Minimum Design Loads forBuildings and Other Structures, ASCE 7-98.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	79b4
authors	Kuenstle, Michael W.
year	2002
title	Flow Structure Environment Simulation - A Comparative Analysis of Wind Flow Phenomena and Building Structure Interaction
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 564-568
doi	https://doi.org/10.52842/conf.ecaade.2002.564
summary	This paper documents the progress of research to investigate the integration of computational modeling techniques into wind mitigation analysis and design for building structures located in high wind prone areas. Some of the basic mechanics and theoretical concepts of fluid flow and wind pressure as well as their translation into design criteria for structural analysis and design are reviewed, followed by a discussion of a detailed Computational Fluid Dynamics (CFD) application case study for a simulated “3-second gust” wind flow over a low rectangular building located in a coastal region. The case study project models the wind flow behavior and pressure distribution over the building structure when situated in three varying conditions within a single terrain exposure category. The simulations include three-dimensional modeling of the building type constructed (1) on-grade in a flat coastal area, (2) above grade with the building elevated on structural columns, and (3) on-grade downwind of an escarpment. The techniques and parameters for development of the simulations are discussed and some preliminary interpretations of the results are evaluated by comparing their predictions to existing experimental and analytical data.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	9e16
authors	Neuckermans, H., Heylighen, A. and Morisse, P.
year	2002
title	Visual Keys to Architectural Design
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 175-182
doi	https://doi.org/10.52842/conf.caadria.2002.175
summary	This paper presents a new mechanism to access and interact with DYNAMO, a collective case base for architectural design developed as a Web-based tool. The system is fully operational since a few years in the context of architectural design education as well as for seminars on architectural theory. We have now developed a set of visual keys structured at the one hand according to the Vitruvian tripartition of architecture: Firmitas (structure, materials,…), Utilitas (building programme,…), Venustas (formal qualities/articulation, spatial configuration,…) to which we added Context (topography, site, budget, climate,...) as a supplementary dimension, and at the other hand including three levels of detail: single spaces, building blocks or master plan entities. Visual keys match the architect’s designerly way of thinking. The visual keys are in fact nothing else than a graphical codification of architecture within the realm of architectural composition. The software, that has been developed so far, does not only allow users to access cases via the keys we have implemented, but it also provides a tool to sketch and submit their own keys.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	d03a
authors	Noble, Douglas and Kensek, Karen M.
year	2002
title	CAD/CAM Methods in Support of Historic Preservation: A Case Study of the Freeman House by Frank Lloyd Wright
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 52-54
summary	Preservationists have an impressive array of digital tools to aid them in documentation and analysis of historic structures. The tools range from near photo-realistic renderings to demonstrate what a “restored” building might have looked like at one specifi c time in history to complex chemical analysis of paint chips and pigments to geographic information systems used as management tools for historic prop er ties. Computer-aided design / computer-aided manufacturing (CAD/CAM) is set of important digital aids in historic preservation efforts. This paper presents a case study of the use of CAD/CAM in support of an effort to restore a textile block house designed by Frank Lloyd Wright. CAD/CAM methods are being employed to help produce a new mold so that new textile blocks can be manufactured that match the existing blocks. An existing textile block mold was digitally scanned, digitally mirrored and edited, and will be fabricated from an aluminum billet to replace a mold that no longer exists. Although seemingly a simple process and well within current technological abilities, the work proved substantially more challenging that initially imagined.
keywords	CAD/CAM, historic preservation, textile block, Frank Lloyd Wright
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ddssar0225
id	ddssar0225
authors	Ozsariyildiz, S.S., Sariyildiz, I.S. and Stouffs, R.
year	2002
title	ICKT support for the Building Industry: A Virtual Partner
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	We are now at a stage in which ICKT techniques allows us to develop knowledge intensive systems, such as intelligent decision support systems, to support collaboration and cooperation. This paper describes a theoretical approach, in which collaborative agents take on the role as a partner during the decision making process, in order to support various actors in the building process. The group-decision making set-up will be discussed and we will give an overview on the state of art of this subject. We will give some insights into their application in the building practice. In addition, we will provide some examples of use-case-scenarios as inception and early design support and evaluate it.
series	DDSS
last changed	2003/08/07 16:36

_id	6348
authors	Schnabel, Marc Aurel and Kvan, Thomas
year	2002
title	Interaction in virtual building space, Distributing Knowledge in Building
source	CIB W78 Conference 2002, Proceedings, Vol. 2, pp91-98, Aarhus School of Architecture, Denmark, 12 –14 June
summary	This paper presents the results from two experiments in working on descriptions of form in immersive virtual environments (IVE). Recently; Virtual Environments (VE) are increasingly used as environments for design and research. Using VE to visualize ideas from the initial steps of design; the architect is challenged to deal with perception of space; solid and void; without translations to and from a two dimensional media. From this new ability; we might expect new forms of design interaction and expression. The goal of our studies was to identify how designers use and communicate early design ideas by using immersive three-dimensional (3D) VEs and how they describe 3D volumes using different media. We set up a series of experiments including navigation- and perception-tasks; designing in IVE; transcription of design; remote communication between design partners and controlled observations. We explored initial intentions of 3D-immersive design schemes; textual descriptions and collaborations within IVE. This paper describes the outcome of creation; interpretation and communication of architectural design; by using an Immersive Joint Design Studio; as well as the description and translation of a 3D cubic structure. We discuss frameworks and factors influencing how architectural students communicate their proposals in an immersive Virtual Environment Design Studio (VeDS) and how this approach of design studio enables to understand volumes and spatial relationships.
keywords	Virtual Environment; Remote Collaboration; Design Evaluation; Spatial Understanding
series	other
email
last changed	2002/11/15 18:29

_id	bb0c
authors	Vilas Boas, Naylor Barbosa
year	2002
title	A Computação Gráfica e a Pesquisa Acadêmica: Representando os Ícones da Cidade [Computer graphics and academic research: representing the city icons]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 84-86
summary	This paper has the objective to expose ideas about the signification of computer graphics in an academic research environment. Those ideas and their consequent work methodologies were developed from experiences with 3d modeling related to the work produced within the research group LAURD, meaning Digital Representation and Urban Analysis Laboratory, which dedicates itself to research the potentialities of those tools in order to explore new possibilities of analysis and studies representations about architectural icons and their insertion in the urban environment. Along this process, could be developed some methodological concepts which conducted the elaboration of 3d models of LAURD’s main study case – the Health and Education Ministry building, also known as Gustavo Capanema Palace. In this paper will be explained the methodologies developed from those concepts, and the consequent results of the 3d model made with them.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	9f9c
authors	Hu, Xiaochun
year	2002
title	An Information-based Framework for Composites Design
source	Drexel University
summary	The heterogeneity of composites determines that composite materials can be engineered to better satisfy a specific design requirement. The main problems that have hindered the application of composites are the need for the material and manufacturing design to be conducted simultaneously, the involvement of a large number of design factors, the difficulty in the characterization of composites, and the inherent repetition of the design process. Considering these problems, this thesis presents an information-based framework for composites design. This research consists of four main aspects: (1) The development of a heterogeneous CAD modeling algorithm and an integrated CAD/CAE method, and their application in a unit cell-based characterization of composite materials with a complex fiber form; (2)The development of a unit cell database for improving the material and manufacturing process design, which covers the design of its database model and the access strategies based on the logic architecture of unit cells and the relationships among elements of unit cells and with the environments; (3)The design of an Information-Based Design Support System (IBDSS) to support the composites design by using the unit cell database, in which the blackboard framework is adopted for the system to organize various computer techniques for different design stages, and to support the design iterating to satisfactory ones incrementally and efficiently, and the data structure of the blackboard, the algorithm to control design iterations, and design procedures for every stage are studied; and (4) The introduction of a ranking-based unit cell evaluation methodology and effective ranking factors for facilitating and improving the composite design process. The approach improves the efficiency of composites design by automating design iterations, supporting composite characterization, alleviating the cost of composite material and manufacturing method design, and assisting in tailored material selection. Case studies are presented to show how the IBDSS is applied to support composites design.
keywords	Mechanical Engineering
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	2d44
authors	Tsou, Jin-Yeu and Chow, Benny
year	2002
title	Integrating Scientific Simulation with Rapid-Prototyping Modeling for Design Curriculum Development
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 548-551
doi	https://doi.org/10.52842/conf.ecaade.2002.548
summary	Although Computer-Aided Architectural Design tools have been introduced to studios for design visualization and communication, tangible models constructed by cardboard or other modeling materials still play an important role in assisting students on developing their conceptual framework related to spatial organization. A Rapid Prototyping (RP) system could provide a paradigm shift from the existing workflow of hand-made architectural model into an automated computer-aided manufacturing (CAM) environment. The introduction of computer controlled manufacturing technology will not limit the use of current conventional model making, and it will provide new capabilities for precise scaled model making and the possibility to generate free-form surface models for design representation. Because the technical capabilities of RP system could dramatically change the design workflow, the computer-aided manufacturing approach for architectural design has been adopted by overseas and local academic institutions. In this paper, we report the findings of a pilot study that applied rapid prototyping technology in architectural design education for helping students exploring an automated computer-aided manufacturing environment during early stage of design development.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	8f4f
authors	Gibson, I., Kvan, Th. and Ling, W.M.
year	2002
title	Rapid Prototyping of Architectural Models
source	Journal of Rapid Prototyping, 8:2, pp. 91-99
summary	The goal of our study was to identify how designers use and communicate early design ideas by using immersive three-dimensional VEs. We set-up a series of experiments including navigation- and perception-tasks; designing in immersive VE; transcription of design; remote communication between design partners and controlled observations. We explored initial intentions of 3D-immersive design schemes; textual descriptions and collaborations within immersive VE. This article describes the outcome of creation; interpretation and communication of architectural design; by using a three-dimensional (3D) maze together with text-based communication in a series of collaborative design experiments. We conducted the first successful attempt of a Joint Design Studio; which uses immersive VE as tool of design and communication between remote partners. We discuss frameworks and factors influencing how architectural students communicate their proposals in an immersive Virtual Environment Design Studio (VeDS); and how this new approach of design studio enables new forms of design expressions.
keywords	Rapid Prototyping; Architectural Design
series	journal paper
email
last changed	2002/11/15 18:29

_id	c7e0
id	c7e0
authors	Maria Gabriela Caffarena Celani
year	2002
title	BEYOND ANALYSIS AND REPRESENTATION IN CAD: A NEW COMPUTATIONAL APPROACH TO DESIGN EDUCATION
source	Submitted to the Department of Architecture in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the field of Architecture: Design & Computation at the Massachusetts Institute of Technology
summary	This thesis aims at changing students' attitude towards the use of computer-aided design (CAD) in architecture. It starts from the premise that CAD is used mostly for analysis and representation, and not as a real design aide, and that architecture students have a bias against learning computer programming. For this purpose, a prototypical instruction system that mixes computer-aided design and computational design theory was developed, based on a series of fundamental concepts that are common to both fields. This system was influenced by Mitchell's (1987) The Art of Computer Graphics Programming and Stiny's (1976) shape grammars. Despite being based on solid theoretical foundations, CAD has progressively become an exclusively practical tool, since its origins in the 50's and 60's, while computational design theories have been mostly restricted to the academic circles. This thesis proposes an inversion in the present situation: the study of CAD theory, and the application of computational design into practice. The system proposed provides a conceptual framework that can be adapted to different circumstances, including course formats and resources, as well as students' background and technical training. It is based on seven fundamental concepts from computational design theories that are also important to the study of shape grammars: symmetry, recursion, rule-based compositions, parameterization of shapes, generative systems, algorithmization of design procedures, and shape emergence. These concepts are introduced within a CAD context, where their practical implementation and experimentation are possible, focusing the understanding of the computational nature of design. During this research, the proposed system was tested in two case studies with students from schools that had contrary orientations in terms of the importance of CAD in the architectural curriculum. In these experimental courses, students' activities evolved from using a commercial CAD tool in an innovative way, to the use of programming techniques for creating meaningful tools. Despite not having a statistical reach, the fieldwork allowed drawing preliminary conclusions about the proposed system's efficacy, since virtually all the students reported changing their understanding of the role of CAD in architecture, while some also acknowledged a conceptual influence in other subjects and in the way they see architecture.
keywords	Symmetry
series	thesis:PhD
type	normal paper
email
more	http://www.fec.unicamp.br/~celani/
last changed	2004/11/17 20:51

For more results click below: