Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 500

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_111
id	ecaade2013_111
authors	Androutsopoulou, Eirini
year	2013
title	Urban Body Mutations through the Use of the Network Configuration
doi	https://doi.org/10.52842/conf.ecaade.2013.1.275
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 275-281
summary	Taking as a starting point the hypotheses that the urban body is a self-adapted ecology made of material and non-material components (Bateson, 1972), relationships between elements are examined in an attempt to destabilize the static division of matter and idea and to inquire into those relationships that determine the structural coupling (Maturana, 2002) between body and environment, as well as the constitution of the body itself. Contemporary technology is used in order to trace these alterations and the urban body is examined as a network configuration. The importance of the methodology adopted by the current research lies in the fact that social and economic factors merge with spatial characteristics, allowing for a visualization and re-interpretation of the urban body mutations based on self-adapted reconfigurations and for a prediction of the structural alterations made possible through the reconfiguration of the synaptic forces between elements.
wos	WOS:000340635300028
keywords	Mutation; urban body; visualization techniques; network; data manipulation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
doi	https://doi.org/10.52842/conf.caadria.2002.
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	1d66
authors	Asanowicz, Aleksander
year	2002
title	Hybrid Design Environment
doi	https://doi.org/10.52842/conf.ecaade.2002.572
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 572-576
summary	This paper discusses some preliminary ideas concerning new design environment or environment of designing. Main thesis of this paper is that process of creation and perception of architecture proceed between Real and Virtual. Architecture is created by analog and/or digital media. A the result we have the multitude and diversity of spaces and tools. Defining these terms is important for understanding a new process of design and a new space of designing. It gives us possibilities to create the new design environment, in which creation of architectural form may be considered as an integrated process connecting the analog, the digital, the real and the virtual. Architectural space, as we know it from physical environments, is supplemented by a virtual space. Physical, architectural and virtual spaces share very similar features in simulation. In virtual models, the boundary between the representation of physical sites and imaginary, virtual sites is vanishing rapidly, resulting in a new reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6d22
authors	Bermudez, J., Agutter, J., Syroid, N., Lilly, B., Sharir, Y., Lopez, T., Westenskow, D. and Foresti, S.
year	2002
title	Interfacing Virtual & Physical Spaces through the Body: The cyberPRINT Project
doi	https://doi.org/10.52842/conf.acadia.2002.395
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 395-400
summary	The cyberPRINT is a fully immersive, interactive virtual environment that is being generated in rea-timebased on physiological data readings of a human body. In other words, the cyberPRINT is based oncreating interfaces between physical and digital spaces and between biology and informationtechnologies. The cyberPRINT is also an event, wherein a performer is connected to the cyberPRINTgenerator to create a self-sustaining feedback mechanism. Although using the body to electronicallydrive music and media events is not new, most of these works have paid little or no attention to thepotential of interactive 3D virtual environments. Nor have they been so technologically advanced,interdisciplinary intensive (involving architecture, choreography, modern dance, music, bioengineering,medicine and computer science), or architecturally focused as the cyberPRINT.This project covers a wide and fertile territory that goes from the very technical and design oriented tothe very theoretical and interdisciplinary. This paper is intended to (1) expand what has been alreadypublished about this project (Bermudez et al 2000a) and (2) establish potential areas for discussionbefore and after the performance
series	ACADIA
email
last changed	2022/06/07 07:52

_id	263a
authors	Bermúdez, Julio
year	2002
title	Implicaciones Arquitectónicas de La Naturaleza del Hacer en Ambientes Digitales [Architectonic Implications of the Nature of the Digital Atmosphere ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 142-145
summary	Architectural Implications of the Nature of Making in Digital Environments There exists an a-priori relationship between the basic structural constrains of an environment and the types of construction that may evolve there. For instance, the inexorable laws of nature have caused architecture to develop as a physical, stable, containing and inert object. Hence there are good reasons to study how cyberspace with its different ontological foundations may define the architecture to be built there. This examination may be best accomplished by concentrating in how what is structurally unique to the cyber impacts architectural design This paper investigates the ontology of construction in cyberspace by analyzing ordinary digital laws that defy reality. The findings both challenge our traditional conceptions of architecture and guide us toward totally unprecedented design potentials. The goal is to begin building a fundamental theory of architectural space, design and construction applicable to cyberspace.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.310
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	1389
authors	Bustos, Gabriela L. and Burgos, Iván P.
year	2002
title	Desarrollo y Aplicabilidad de Menús Virtuales en VRML [Architectonic Development and Applicability of Virtual Menus in VRML]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 199-202
summary	The Virtual Reality Modeling Language (VRML), has allowed extend all of its resources and possibilities for Architectural Applications under the same Virtual Reality’s technology platform. In order to take advantages of its possibilities, this resource focus on exposes the development and application of virtual menus in VRML and Java Script as a first step for the creation of Synthetic Environment Laboratory in the faculty of Architecture and Design of University of Zulia, Venezuela. It presents in short, how algorithms were defined to design the menus, the use of a program in Visual Basic that permit addition of virtual menus toany WRL file, without any programming approach, as well as specific samples of applicability of the menus developed in a VRMLenvironment and how they are included in a methodological model of architectural design.
keywords	virtual reality, synthetic environments, architectural design, inmersive projection systems.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddssup0204
id	ddssup0204
authors	Caratù, G., Concilio, G. and Monno, V.
year	2002
title	Structuring Lay Knowledge in a GI Perspective: Problems and Pitfall
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	The present contribution, starting from some considerations developed in environmental planning domain, discusses the representation of lay knowledge in a GIS environment. Two paths of exploration in dealing with representational problems are sketched. The first is concerned with the structuring of an acquired cognitive base and, the other is about the implementation of cognitive routines. In particular the structuring process of a lay cognitive base is discussed starting from recent developments in GIS technologies and information theories. Difficulties and pitfalls, which arouse during a case study related to an environmental planning experience being carried on for a national natural park, are presented. The experimentation work is discussed also in relation with a preliminary attempt of outputs validation carried out with people who, in a preliminary stage, were interviewed in order to acquire lay knowledge.
series	DDSS
last changed	2003/08/07 16:36

_id	2cd9
authors	Ceccato, C. Fischer, Th., Li Chun-Man, G. and Frazer, J.
year	2002
title	A Large-Scale Computing Infrastructure for Design Education
doi	https://doi.org/10.52842/conf.ecaade.2002.282
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 282-289
summary	Most departmental computing infrastructure reflects the state of networking technology and available funds at the time of construction, which converge in a preconceived notion of homogeneity of network architecture and usage patterns. The DMAN (Digital Media Access Network) project, a large-scale server and network foundation for The Hong Kong Polytechnic University’s School of Design, was created as a platform that would support a highly complex academic environment while giving maximum freedom to students, faculty and researchers through simplicity and ease of use. As a centralized multi-user computation backbone, DMAN faces an extremely heterogeneous user and application profile, exceeding implementation and maintenance challenges of typical enterprise, and even most academic server set-ups. This paper summarizes the specification, implementation and application of the system while describing its significance for design education in a computational context.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	705f
authors	Champion, Erik and Dave, Bharat
year	2002
title	Where is this place?
doi	https://doi.org/10.52842/conf.acadia.2002.085
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 85-95
summary	‘Place’ is arguably an essential component of most successful virtual environments, yet the concept ofwhat is ‘place’, and what sort of ‘placeness’ is required for digital environments, are seldom discussed.A reflexive argument such as here is a place because it was designed to be a place does not stimulatedesign guidelines for virtual places, and it certainly does not help us create and evaluate virtual placessuitable for audiences who vary in intention or in available technology. To articulate useful distinctionsbetween virtual places, this paper extends design guidelines proposed by Kalay and Marx, reshapesthem with the help of Relph’s definitions, into spatial visualisation and activity-based environments, andadds a further category, the hermeneutic. The paper also proposes a graduated matrix for selection ofplacemaking elements and for selecting a mode of representation appropriate to the design objective ofthe virtual environment, be it spatial, activity-based, or hermeneutic.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddssar0207
id	ddssar0207
authors	Conti, G. and Ucelli, G.
year	2002
title	A Java3D Tool for Real-Time Collaboration in a Virtual Reality CAADEnvironment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Today the development of network-based virtual communities and the use of avatars have brought a new level of complexity to the meaning of virtuality, providing the technology for remote presence and collaborative experiences. In this project the intention was to pursue this articulated vision of VR in order to assist the design profession during the early stages of the design process. The objective was to provide a tool that is capable of creating 3D shapes in a shared VR environment, thus allowing thedesign and its evolution to be shared. The use of the Java programming language was a natural choice for this project. Because of Java’s performance scalability and hardware independence the concept ofCAAD has been extended, making it possible to create a VR environment that can co-exist between high-end supercomputers and standard PCs. The project is currently being tested using PCs and an SGI system running a Reality Centre. The research reported in this paper describes the architecture and application of software that aims to increase the opportunity for collaboration within virtual worlds and enable effective and transparent information exchange.
series	DDSS
last changed	2003/08/07 16:36

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	012c
authors	De Araujo, Tereza Cristina Malveira and Rossi, Angela Maria Gabriella
year	2002
title	O real, o virtual e a Internet na era da Informação [The Real, the virtual and the Internet in the Information Age]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 28-30
summary	Over the last decade, advances in computer graphics plus the growing popularity of the Internet have incorporated the words reality and virtuality into our vocabulary, at the same time, making the distance between the words shorter. In this article, we discuss the two concepts - reality and virtuality - and analyze how this question has affected human communication, specially in the Web environment. This analysis will be used as a basis for research on the impact of “non-presence” in working relationships in a virtual environment, more specifically in the architecture and engineering areas where we find the Web being used as a communication tool for the development of collaborative design between groups involved with the design process of the built environment.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ddssar0229
id	ddssar0229
authors	De Vries, B., Jessurun, A.J. and J. Dijkstra, J.
year	2002
title	Conformance Checking by Capturing and Simulating Human Behaviour in the Built Environment
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to model natural human behaviour, it is necessary to capture this behaviour. First, we will start out by modelling behaviour for specific situations, such as taking a seat in a theatre. To capture humanbehaviour, the following experiment is performed: Given a virtual environment, a sufficient number of subjects (real humans) are asked to execute a human task in this virtual environment (e.g. take a seat inthe theatre). Whenever the subject deviates from the shortest path, the system will ask for a clue why this is done. The hypothesis is that the combination of the motion paths and the clues for making/changing decisions will provide decision rules to make reliable predictions about human behaviour under the same conditions when using virtual persons. To test the hypothesis, we propose to use the university’s main conference and presentation hall as a test case. A 3D model and a motion pathgraph are constructed that enables a virtual person to find its way to a selected chair. The clues from the experiment are implemented as decision rules that determine a virtual person’s behaviour. Running thesimulation will result in the following data: Time per person to find a chair, Deviation from the shortest path, Distance covered per person to find a chair, Distribution of seated persons over time and Relocation of persons. To validate the test case, the process of people entering the hall and finding a chair is recorded on videotape. The walking behaviour of the people observed on the video is analysed and compared with the data from the simulation.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0205
id	ddssup0205
authors	Deguchi, A., Tabira, Y., Matsuura, H., Nakano, H. and Arima, T.
year	2002
title	Integration System of Archaeological and Geographical Informationfor Planning in Historical Regions
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	This study aims to construct the GIS for supporting the planning process and archaeological analysis in the historical regions by integrating geographical data and archaeological data on the sites with ruinsand remains in various period from ancient through medieval which had been buried and was recently excavated in geologic layers and mounds. First, for understanding the trends of environmental condition the excavated sites, we analyze the relationship between the site location and the condition ofgeography and natural environment by using the constructed system.Secondary, we develop the system to make it possible to browse and operate the information on the GIS through the internet. This web GIS constructed by us supports sharing the information on planning for preservation of historical sites among city planners, archaeologists and citizens, and serve as a tool for the collaboration and the coordination of urban development and historical preservation. Finally, as the application with the GIS, we show the results of case studies and point out the merits and effects about usage of the GIS for archaeological analysis as well as learning the local history.
series	DDSS
last changed	2003/08/07 16:36

_id	b74f
authors	Dijkstra, Jan and Timmermans, Harry
year	2002
title	Towards a multi-agent model for visualizing simulated user behavior to support the assessment of design performance
source	Automation in Construction 11 (2) (2002) pp. 135-145
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	7e02
authors	Elger, Dietrich and Russell, Peter
year	2002
title	The Virtual Campus: A new place for (lifelong) learning?
doi	https://doi.org/10.52842/conf.ecaade.2002.472
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 472-477
summary	472 eCAADe 20 [design e-ducation] Modeling Real and Virtual Worlds Session 13 In the early spring of 2001 a collection of German universities founded a virtual faculty of architecture, which was named „Liquid Campus“. Current thinking about future forms of education in the field of architecture combined with over 4 years of experience with net-based design studios, led to questions about the future of existing universities, their buildings and their use. This problem was put to 43 students in the form of a design exercise to create a place for a virtual university. In the current situation, in which the administration of knowledge is more and more located on the internet, and even the so-called meeting places themselves can be virtualised through the help of video-conference-software, the exercise was to design a virtual campus in the framework and to carry out this design work in a simulation of distributed practice. Initial criticism of the project came from the students in that exemplary working methods were not described, but left for the students to discover on their own. The creation of a concept for the Liquid Campus meant that the participants had to imagine working in a world without the face to face contacts that form the basis (at present) of personal interaction. Additionally, the assignment to create or design possible links between the real and the virtual was not an easy task for students who normally design and plan real physical buildings. Even the tutors had difficulties in producing focused constructive criticism about a virtual campus; in effect the virtualisation of the university leads to a distinctive blurring of its boundaries. The project was conducted using the pedagogical framework of the netzentwurf.de; a relatively well established Internet based communication platform. This means that the studio was organised in the „traditional“ structure consisting of an initial 3 day workshop, a face to face midterm review, and a collective final review, held 3,5 months later in the Museum of Communication in Frankfurt am Main, Germany. In teams of 3 (with each student from a different university and a tutor located at a fourth) the students worked over the Internet to produce collaborative design solutions. The groups ended up with designs that spanned a range of solutions between real and virtual architecture. Examples of the student’s work (which is all available online) as well as their working methods are described. It must be said that the energy invested in the studio by the organisers of the virtual campus (as well as the students who took part) was considerably higher than in normal design studios and the paper seeks to look critically at the effort in relation to the outcomes achieved. The range and depth of the student’s work was surprising to many in the project, especially considering the initial hurdles (both social and technological) that had to overcome. The self-referential nature of the theme, the method and the working environment encouraged the students to take a more philosophical approach to the design problem. The paper explores the implications of the student’s conclusions on the nature of the university in general and draws conclusions specific to architectural education and the role of architecture in this process.
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: