Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 513

Reformat results as: short short into frame detailed detailed into frame

_id	4f57
authors	Nikiforiadis, Faidon and Pitts, Adrian
year	2002
title	A Study of the Accuracy of Daylighting Simulation of Heavily Obstructed Buildings in the Urban Canyons of Athens
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 456-463
doi	https://doi.org/10.52842/conf.ecaade.2002.456
summary	This paper deals with the use and evaluation of daylighting simulation tools in relation to a complex urban environment. The environment concerned is one commonly found in city centre areas where the proximity of buildings leads to the creation of ‘urban canyons’; the result of this is that assessment and simulation of daylight requires a more sophisticated approach than for other situations. In urban areas building layout is the most important factor effecting daylight, sunlight and solar heat gain reaching a building. It also affects sunlight in open spaces, ventilation, shelter and the dispersal of pollutants. In order to produce a more realistic understanding of the dynamic effects of daylight, there is a need not only for the research and development of advanced CAD and lighting simulation tools, but also of the study of possible alternative methods in their application. In the work reported in this paper, an attempt has been made to move the focus of lighting and daylighting simulation from the scale of a room to that of a whole building; the building itself being surrounded by its specific urban environment (including its microclimate). The study evaluates if there is sufficient evidence that it is possible with such complexity to reach reliable computation results after executing the simulation. The case study presented uses a 4D model of an urban canyon to investigate the sensitivity of such a complex simulation system. It can also be used to find ways to analyse and predict how daylight is reflected, refracted, scattered, diffused, polarised, diffracted and absorbed as it traverses an urban environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	5965
authors	Bueno, Ernesto and Salguero, Cesar
year	2002
title	Centro Virtual de Arte Digital Venezolano - Proyecto de Titulación sobre Arquitectura para el Ciberespacio [Virtual Center of Venezuelan Digital Art - Thesis Project on Architecture for the Cyberspace ]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 180-183
summary	This article talks about the development and presentation of our work of Degree Thesis, framed inside a Degree Theses restructuring process in the School of Architecture, in this case, emphasizing in virtual buildings design. The Virtual Centre of Venezuelan Digital Art project is a research and design project of a type of Arts Centre with cyberspace only presence specialized in the exhibition of Venezuelan digital art. The first part of it needed an information research, studies in the diverse ways in thatcomputers have being used for virtual museums design, the diverse focuses for the creation of this type of museums and the study of a museum model that adapts to the way this project were focused. When completing the theoretical basement, the individual proposals were developed. In general terms, the prospective results were achieved.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	349e
authors	Durmisevic, Sanja
year	2002
title	Perception Aspects in Underground Spaces using Intelligent Knowledge Modeling
source	Delft University of Technology
summary	The intensification, combination and transformation are main strategies for future spatial development of the Netherlands, which are stated in the Fifth Bill regarding Spatial Planning. These strategies indicate that in the future, space should be utilized in a more compact and more efficient way requiring, at the same time, re-evaluation of the existing built environment and finding ways to improve it. In this context, the concept of multiple space usage is accentuated, which would focus on intensive 4-dimensional spatial exploration. The underground space is acknowledged as an important part of multiple space usage. In the document 'Spatial Exploration 2000', the underground space is recognized by policy makers as an important new 'frontier' that could provide significant contribution to future spatial requirements.In a relatively short period, the underground space became an important research area. Although among specialists there is appreciation of what underground space could provide for densely populated urban areas, there are still reserved feelings by the public, which mostly relate to the poor quality of these spaces. Many realized underground projects, namely subways, resulted in poor user satisfaction. Today, there is still a significant knowledge gap related to perception of underground space. There is also a lack of detailed documentation on actual applications of the theories, followed by research results and applied techniques. This is the case in different areas of architectural design, but for underground spaces perhaps most evident due to their infancv role in general architectural practice. In order to create better designs, diverse aspects, which are very often of qualitative nature, should be considered in perspective with the final goal to improve quality and image of underground space. In the architectural design process, one has to establish certain relations among design information in advance, to make design backed by sound rationale. The main difficulty at this point is that such relationships may not be determined due to various reasons. One example may be the vagueness of the architectural design data due to linguistic qualities in them. Another, may be vaguely defined design qualities. In this work, the problem was not only the initial fuzziness of the information but also the desired relevancy determination among all pieces of information given. Presently, to determine the existence of such relevancy is more or less a matter of architectural subjective judgement rather than systematic, non-subjective decision-making based on an existing design. This implies that the invocation of certain tools dealing with fuzzy information is essential for enhanced design decisions. Efficient methods and tools to deal with qualitative, soft data are scarce, especially in the architectural domain. Traditionally well established methods, such as statistical analysis, have been used mainly for data analysis focused on similar types to the present research. These methods mainly fall into a category of pattern recognition. Statistical regression methods are the most common approaches towards this goal. One essential drawback of this method is the inability of dealing efficiently with non-linear data. With statistical analysis, the linear relationships are established by regression analysis where dealing with non-linearity is mostly evaded. Concerning the presence of multi-dimensional data sets, it is evident that the assumption of linear relationships among all pieces of information would be a gross approximation, which one has no basis to assume. A starting point in this research was that there maybe both linearity and non-linearity present in the data and therefore the appropriate methods should be used in order to deal with that non-linearity. Therefore, some other commensurate methods were adopted for knowledge modeling. In that respect, soft computing techniques proved to match the quality of the multi-dimensional data-set subject to analysis, which is deemed to be 'soft'. There is yet another reason why soft-computing techniques were applied, which is related to the automation of knowledge modeling. In this respect, traditional models such as Decision Support Systems and Expert Systems have drawbacks. One important drawback is that the development of these systems is a time-consuming process. The programming part, in which various deliberations are required to form a consistent if-then rule knowledge based system, is also a time-consuming activity. For these reasons, the methods and tools from other disciplines, which also deal with soft data, should be integrated into architectural design. With fuzzy logic, the imprecision of data can be dealt with in a similar way to how humans do it. Artificial neural networks are deemed to some extent to model the human brain, and simulate its functions in the form of parallel information processing. They are considered important components of Artificial Intelligence (Al). With neural networks, it is possible to learn from examples, or more precisely to learn from input-output data samples. The combination of the neural and fuzzy approach proved to be a powerful combination for dealing with qualitative data. The problem of automated knowledge modeling is efficiently solved by employment of machine learning techniques. Here, the expertise of prof. dr. Ozer Ciftcioglu in the field of soft computing was crucial for tool development. By combining knowledge from two different disciplines a unique tool could be developed that would enable intelligent modeling of soft data needed for support of the building design process. In this respect, this research is a starting point in that direction. It is multidisciplinary and on the cutting edge between the field of Architecture and the field of Artificial Intelligence. From the architectural viewpoint, the perception of space is considered through relationship between a human being and a built environment. Techniques from the field of Artificial Intelligence are employed to model that relationship. Such an efficient combination of two disciplines makes it possible to extend our knowledge boundaries in the field of architecture and improve design quality. With additional techniques, meta know/edge, or in other words "knowledge about knowledge", can be created. Such techniques involve sensitivity analysis, which determines the amount of dependency of the output of a model (comfort and public safety) on the information fed into the model (input). Another technique is functional relationship modeling between aspects, which is derivation of dependency of a design parameter as a function of user's perceptions. With this technique, it is possible to determine functional relationships between dependent and independent variables. This thesis is a contribution to better understanding of users' perception of underground space, through the prism of public safety and comfort, which was achieved by means of intelligent knowledge modeling. In this respect, this thesis demonstrated an application of ICT (Information and Communication Technology) as a partner in the building design process by employing advanced modeling techniques. The method explained throughout this work is very generic and is possible to apply to not only different areas of architectural design, but also to other domains that involve qualitative data.
keywords	Underground Space; Perception; Soft Computing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	5c07
authors	Lee, H.-L., Liu, Y.-T., Chen, S.-C., Tang, S.-K. and Huang, C.-P., Huang, C.-H., Chang, Y.-L., Chang, K.-W. and Chen, K.-Y.
year	2002
title	A Comparative study of protocol analysis for - Spatiality of a Text-based Cyberspace
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 262-266
doi	https://doi.org/10.52842/conf.ecaade.2002.262
summary	Graduate Institute of Architecture, National Chiao Tung University, Hsinchu, 30050, TAIWAN The adaptation of the word cyberspace (Gibson, 1984) following the emergence of the World Wide Web Internet not only succinctly revolutionized the correlation of time and space but also poised to challenge how we view the existing spatial concept. This research tries to use protocol analysis to examine text-based cyberspace, such as bulletin board, chart rooms and so forth, and the objective of this research is to realize the spatiality of cyberspace through the cognitive point of view, and to compare the differences of the definitions and perception ways of spatiality between people with general domain and in design fields. Finally, we validate the existence of cyberspace, where the process not only allows further categorization of spatial elements concluded from the earlier study, but discover that varied backgrounds can affect how a user defines and perceives cyberspace (Strate, 1999).
series	eCAADe
email
last changed	2022/06/07 07:51

_id	d4c7
authors	Penttilä, Hannu
year	2002
title	Architectural-IT and Educational Curriculumns - A European Overview
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 106-109
doi	https://doi.org/10.52842/conf.ecaade.2002.106
summary	The main objective of this on-going post-graduate study, is to describe the role of ”modern digital information technology” within the educational curriculumns of European schools of architecture. Information technology understood in its widest meaning. Essential questions of the study are: [1] How widely the digital media, tools and methods have been adopted in the education? [the volume] [2] In what ways information technology is utilized in architectural education of our age [the methods]. [3] What kind of changes the digital media in fact has caused to the architectural working and educational environments. The results will be published and “weblished” in the form of searchable public web-databases. The results should contain helpful elementary information for those developing and targeting the future architectural education of “the digital age” The research study was started in April/2002, and will [hopefully] reach the conclusion during the year 2002.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	eaea2001_0
id	eaea2001_0
authors	Schmidt, J. Alexander and Schlömer, Natascha (Eds.)
year	2002
title	ENVIRONMENTAL SIMULATION - NEW IMPULSES IN PLANNING PROCESSES
source	Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1, 225 p.
summary	The 5th eaea Conference in Essen yielded four principal findings: • After having been limited to endoscopic picture and film renderings of analog scaled models, the european architectural endoscopy association (eaea) first bridged the gap to digital environmental simulations at this conference. It is not about a better or correct method, but a suitable method of representing the planned reality of a particular project using ways that make sense. The combination of digital and analog simulation media is a source of impetus to the user of both methods. The future belongs to the casespecific application and the numerous integration possibilities of the two different media. • In investigating the perception of pictures produced in both analog and digital form, it was ascertained that it was only after greater effort that the same level of pleasing qualities were achieved in the digital world, compared to pictures of analog scaled models. It seems that for many planning phases model-based pictures are superior to digital photos – with regards to economy, quality of representation and imaginative attributes. This last point seems to be especially important in the draft planning stages: the less sharp a picture is, the more remaining room for viewer interpretation there is. In particular, the high degree of precision characteristic of digital simulations no longer allows room for imagination in the individual viewer. • 3D environmental simulations will increasingly be incorporated with success in architecture and urban design courses at universities and colleges both here in Germany as well as abroad. The further spread of these techniques to other universities and colleges is desirable. Over and above application as a pedagogic tool, the use of these simulations by architects and city planners, private planning agencies and municipal planning administrators will also be in evidence in the future – for checking designs, for informing the involved parties, for establishing the decisions of government bodies, for marketing the project. • Also, the interactive use of endoscopic simulation facilities continually opens new fields of research – whether it be for registering subjective distance perception, whether it be for determining orientation possibilities in open spaces.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	ddssar0226
id	ddssar0226
authors	Segers, N.M.
year	2002
title	Towards a Data-Structure that can Handle Ambiguous Information in a Computer-Aided Tool for the Early Phase of Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The goal of our research is to develop a computer system that supports an architect in the early phase of the design process. We envision a system that aids in three ways. It helps the architect in maintaining an overview of the development of his or her ideas over time. It shows the current state of the process in a restructured representation. It supports and stimulates the generation of new associations whenever required.The difficulty lies in linking up with the rich information structure of the architect and the various cognitive processes he or she uses to handle this information structure. The consequence is that the system must be able to include all design content, to interpret it, but not to restrict the architect in his or her creativity. Moreover, the system should stimulate creativity.We conducted an experiment to get better insight in what the architect provides as input for the system in the early phase of the design process. Several difficulties have been encountered, which we discuss along with possible solutions for managing the data. The system makes use of user-defined relations and system-defined relations. With these relations we can represent the design content in a comprehensive network that we call the Idea Space. This Idea Space is the basis for above-mentionedfunctionality. In this paper we focus on the (textual) input provided by the architect. In order to get better insight in the ideas and relations made by the architect, in other words the input for the system, we conducted an experiment. Several difficulties were encountered, which we discuss along with possible solutions for managing the data.
series	DDSS
last changed	2003/12/16 12:52

_id	ddssar0220
id	ddssar0220
authors	Van Leeuwen, Jos P.
year	2002
title	Knowledge Sharing for Collaborative Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents the preliminary results of a research project that aims to develop and apply Design Knowledge Servers (DesKs) in the building and construction industry. The paper starts with a view on where the development of computer application in design and construction might be heading. It briefly looks at the current situation concerning information modelling for design support and compares two alternative ways of developing standards in this area. After this sketch of its context, the DesKs project is introduced and its objectives, characteristics, implementations issues, and application scenarios are discussed. The paper concludes with a preview of the next steps we will attempt to take and with an explanation of why it all takes so long.
series	DDSS
last changed	2003/08/07 16:36

_id	f6d6
authors	El Araby, Mostafa
year	2002
title	Possibilities and Constraints of using Virtual Reality in Urban Design
source	CORP 2002, Vienna, pp. 457-463
summary	This study aims at exploring the rapid growth of the use of Virtual Reality techniques in the field of Urban Design. Currently, VirtualReality —the ultimate representation— and Virtual Environments are the most growing fields of information technology and have agreat media attention. This research discusses the possibilities and limitations of applying Virtual Reality (VR) technology inenvironmental simulations for urban design practice. There is evidence to suggest that the use of such technology will enhanceconceivable image of any proposed project at any urban setting for users, designers and clients. Therefore, city officials andadministrators (clients) and the public (users) can reach better decisions regarding proposed projects within their towns and cities.Specifically, this research structured in several interdependent parts: the first part is concerned with the definition of VR as well as abackground of its history and current achievements. Types and components of VR systems are described and traditional simulationtechniques are reviewd. In addition, a discussion of current attempts in incorporating VR in urban design disciplines are presented.This discussion raises the question of appropriateness of the VR techniques in urban design projects. An assesment of both potentialsand limitations of aplying this technique, i.e. VRML (Virtual Reality Modelling Language), are discussed. This study definespotentialities, constraints and problems of using this technique, and recommends future research efforts in the field of using theVirtual Reality as a medium for delivering real content for those interested in the design of the built environment.
series	other
email
more	www.corp.at
last changed	2002/12/19 12:19

_id	24d4
authors	Gaete, Marcela and Pardow, Irene
year	2002
title	Diseño de Interfase - Metodología de acercamiento a la construcción de entornos virtuales [Interphase Design - Methodology of Approach to the building of Virtual Environments]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 175-179
summary	The project we are presenting is based on our professional experience in virtual interface design of multimedia, in CD-ROM and Web format, which has been developed in our design workshops. Our project methodology has one common basis: The metaphorical and conceptual argument for the creation of virtual environments is supported by the observation of the physical environment of human beings and the objects that surround them.The research we have carried out is aimed at establishing a project methodology for interface design based on the hypothesis that observation and knowledge of the relationship between man and environment (architectural and urban), man and object (literacy and symbolic representation) is the basis for the design of recognizable virtual environments. These are functional, representative and efficient elements for the achievement of communicative objectives of such virtual environments. The project reference that supports our research is the outcome of academic and professional project analysis. These projectswill support the demonstration of the suggested methodology which, in the course of the presentation, will be applied to a project to be developed and whose metaphorical basis is the city of Valparaiso.The objective is to use the urban environment as a metaphorical argument for the design of a virtual environment for the Cultural and Historical Registry of Literature, Plastic Arts and Chilean Architecture where Valparaiso has served as reference, source of inspiration and object of study. Together with the methodological project, we will present the instruments that have been created for reference analyis with the purpose of interface design and in order to facilitate a mechanism to evaluate interface design projects.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	65cb
authors	He, J. and Tsou, J.-Y.
year	2002
title	GIS-Based Visual Perception Assessment of Mountain Skyline: A case study of Jinzishan Hill and the building layout of an adjacent site planning project
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 241-248
doi	https://doi.org/10.52842/conf.caadria.2002.241
summary	In this paper, we present a GIS based approach to evaluate the visual perception quality of mountain skyline. Through computer generated analytical maps and perspectives, this tool can assist planners to define the visual reservation scopes for mountain skyline within urban area. It also offers concrete data supporting for appropriate strategy in building layout or site planning to preserve valuable natural skyline scenery.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	7acb
authors	Kuenstle, Michael W.
year	2002
title	Auto-Generative Urban Interventions: A Study of the Relationship between Building Form Generation and Urban Context Mapping
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 297-298
summary	This project documents the progress of research developed to explore the unique relationship between building form and urban context with the application of a novel auto-generative modeling process incorporated into a speculative design methodology. The techniques and parameters for the project are reviewed relative to key concepts of D’Arcy Thompson’s dynamic “theory of transformation” and the development of the auto-generative modeling process. This is followed by a detailed discussion of the set of exchanges between the urban context (field of influence) and the formation of the building intervention that were subsequently mappedthrough a series of diagramming studies. Specific issues explored in the project focus on Thompson’s descriptive analysis of form as a “diagram of forces” and his use of flexible, deformable topological Cartesian nets (Method of Coordinates) to subject the stasis of geometric types to dynamic transformation. Some preliminary interpretations of the project results are evaluated through studies of the generative schemes deployed in different urban situations. The initial results of the study are demonstrated with a resultant schematic building design for a modest scaled intervention in the city of Miami.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ddssar0221
id	ddssar0221
authors	Maassen, W., De Groot, E. and Scholten, J.E.
year	2002
title	Design of an Early Support Tool For Building Services Design:A Design Tool Study
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	There is a need for Dutch design support tools for building services that can be used in early design stages. TNO Building and Construction Research has therefore initiated the research project described here. The project will result in a model for a design support tool for early design of building services in the Netherlands. This tool should make it possible to quickly compare alternative conceptual design solutions and to visualize possible consequences of the underlying design decisions.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup0217
id	ddssup0217
authors	Shen, Z., Kawakami, M. and Kishimoto, K.
year	2002
title	Study on the Development of an On-line Design Collaboration System for Public Participation - A Case Study of Public Park Planning and Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	As a result of reviewing existing research in the field of public participation, an on-line collaborative design system can be broken down into the following four sub-systems : the planning objectives system, the discussion system,the proposals system and the design game system. Using these systems, participants can exchange their ideas and concepts, experience the present situation and give their opinions on an interactive web site. Furthermore, in the design game system, the participants can design their park plan according to their preferences and save their design to a server database. Other participants can then access the database to review another participant’s design for purposes of comparing and getting consensus. In order to evaluate our demonstration system, we carried out anexperiment using the design game in Yamanoue community where a park project was scheduled by the local government of the area. Through the participation of the residents and university students, we were able to analyze the design process of the park design workshop in an Internet environment. In particular we were able to examine the exchanging of participates’ ideas, the process they all used in creating VRML worlds of their park design and the effectiveness of VRML for plan presentation.
series	DDSS
last changed	2003/08/07 16:36

_id	160eaea2001
id	160eaea2001
authors	Stellingwerff, Martijn
year	2002
title	Architects’ Visual Literacy
source	Environmental Simulation - New Impulses in Planning Processes [Proceedings of the 5th European Architectural Endoscopy Association Conference / ISBN 3-922602-85-1]
summary	This paper presents a partial summary of my PhD research with the working title: “View preferences and effects - a study of visual language for architectural design within a represented urban context”. In contrast to much VR-research that focuses on techniques for the public presentation of a completed design or an existing urban site, this research focuses on the use of 3D-city-models during the architectural design process. The models serve as a source of visual information that can be used to bring the design in a good relation with the yet existing built environment. In the research, I investigated the possibilities to make a VRML - city-model adaptable in its representation, in order to adhere to both the factual and the imaginative needs of a designing architect. The paper consecutively presents the problem, the conceptual change and development of research questions, the methodology and a brief overview of the research findings.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	bb0c
authors	Vilas Boas, Naylor Barbosa
year	2002
title	A Computação Gráfica e a Pesquisa Acadêmica: Representando os Ícones da Cidade [Computer graphics and academic research: representing the city icons]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 84-86
summary	This paper has the objective to expose ideas about the signification of computer graphics in an academic research environment. Those ideas and their consequent work methodologies were developed from experiences with 3d modeling related to the work produced within the research group LAURD, meaning Digital Representation and Urban Analysis Laboratory, which dedicates itself to research the potentialities of those tools in order to explore new possibilities of analysis and studies representations about architectural icons and their insertion in the urban environment. Along this process, could be developed some methodological concepts which conducted the elaboration of 3d models of LAURD’s main study case – the Health and Education Ministry building, also known as Gustavo Capanema Palace. In this paper will be explained the methodologies developed from those concepts, and the consequent results of the 3d model made with them.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ddssar0204
id	ddssar0204
authors	Asanowicz, A.
year	2002
title	Evolution of Media for Early Design Stages
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In this paper the evolution of media used at early design stages will be considered. In traditional methods of searching and presenting the design idea, the basic tool used was the graphic representation. Implementation of new digital techniques in 60s - 70s focused on the mathematical way ofrepresentation. These methods were “not architect friendly” (lack of graphic representation traditionally used by architects). As a result, the development of methods for digital support of form searching was terminated. The computer was used as a tool for drafting. Creative usage of computers for form searching through sketching on the display was extremely difficult. The computer could be described as an “incompatible pencil”. Only in recent years can we see new efforts in this area ofdesign methodology. Thanks to new technical possibilities we have a new chance for changing the process of designing. New kinds of software and hardware let us use the computer not as a pen, but as a medium. In this paper different new ways of form searching will be considered (from very simple method as the scansketches to very complicated ones, such as the generic algorithms). At the end, the influence of new media on the process of design will be presented.
series	DDSS
last changed	2003/11/21 15:16

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

For more results click below: