Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar0223
id	ddssar0223
authors	Mahdavi, A, Suter G. and Ries, R.
year	2002
title	A Representation Scheme for Integrated Building Performance Analysis
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	This paper presents a representational scheme for integrated building performance analysis. The underlying research work was motivated by the need for seamless exchange of structured design information.A comprehensive and widely accepted industry standard suitable for exchanging design information among the various AEC (Architecture/Engineering/Construction) applications has yet to emerge. As a contribution to this on-going discussion, we present a specific approach to the integration problem in building product modeling. This approach can be viewed as pragmatic or bottom-up in the sense that itwas driven by the informational needs of related individual domains (particularly in the early stages of design) rather than by a quest for a universally applicable solution. In this paper, we describe a schemawhich emerged from the SEMPER effort, a multi-year project aimed at supporting detailed performance analysis for early design in the energy, life-cycle analysis, lighting, and thermal comfort domains. Thisschema relies on a representational division of labor between a shared building model, and various disciplinary (domain) models. Specifically, we present a documentation of the shared object model together with disciplinary models for the energy, light, acoustics, and life-cyle assessment domain.
keywords	building product models, building performance, integration
series	DDSS
last changed	2003/08/07 16:36

_id	2005_237
id	2005_237
authors	Schink, Claus-Jürgen, König, Holger and Krines, Manfred
year	2005
title	The “BASYS”-house - From a Research Project to Practice - a house in a day
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 237-243
doi	https://doi.org/10.52842/conf.ecaade.2005.237
summary	From 2000 to 2002 a building system was developed within an applied research project for creating individual planned, but widely prefabricated building- elements consisting of “Brettstapelholz”. These are massive wood elements, fabricated by a CNC-machine. Two years later the results were transferred to the building industry. Most of the developed innovations had been adapted, the virtual enterprise worked together spatially separated via a common internet platform. The building elements developed by the architect were used. Although working properly, the complete integration of the CAD/CAM chain hadn’t been completely adapted. The house was shown at the “Bau”-exhibition in Munich. The following day it was mounted 350 km far from Munich and finished at the same day. Overall, it took only one day to mount the house, from the bottom to the roof. The article will show the building system and discuss the experiences gained by transferring research to industry.
keywords	Multidisciplinary Design for Sustainability, CAD-CAM, Massive Wood Construction, Industrial Production of Buildings, Sustainable Construction, Low-eMission Buildings, Virtual Enterprise, Integral Planning Process
series	eCAADe
email
last changed	2022/06/07 07:57

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	63d1
authors	Rapid Prototyping Group Rapid Design and Manufacture Centre (RDM), Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, Bruce
year	2002
title	Rapid design and manufacture tools in architecture
source	Automation in Construction 11 (3) (2002) pp. 279-290
summary	The continuing development of Rapid Prototyping technologies and the introduction of Concept Modelling technologies means that their use is expanding into a greater range of applications. The primary aim of this paper is to give the reader an overview of the current state of the art in Layered Manufacturing (LM) technology and its applicability in the field of architecture. The paper reports on the findings of a benchmarking study, conducted by the Rapid Design and Manufacturing (RDM) Group in Glasgow [G.J. Ryder, A. McGown, W. Ion, G. Green, D. Harrison, B. Wood, Rapid Prototyping Feasibility Report, Rapid Prototyping Group, Glasgow School of Art, 1998.], which identified that the applicability of LM technologies in any application can be governed by a series of critical process and application specific issues. A further survey carried out by the RDM group investigated current model making practice, current 3D CAD use and current use of LM technologies within the field of architecture. The findings are then compared with the capabilities of LM technologies. Future research needs in this area are identified and briefly outlined.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	65cb
authors	He, J. and Tsou, J.-Y.
year	2002
title	GIS-Based Visual Perception Assessment of Mountain Skyline: A case study of Jinzishan Hill and the building layout of an adjacent site planning project
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 241-248
doi	https://doi.org/10.52842/conf.caadria.2002.241
summary	In this paper, we present a GIS based approach to evaluate the visual perception quality of mountain skyline. Through computer generated analytical maps and perspectives, this tool can assist planners to define the visual reservation scopes for mountain skyline within urban area. It also offers concrete data supporting for appropriate strategy in building layout or site planning to preserve valuable natural skyline scenery.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	bcf7
authors	Arvin, Scott A. and House, Donald H.
year	2002
title	Modeling architectural design objectives in physically based space planning
source	Automation in Construction 11 (2) (2002) pp. 213-225
summary	Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ga0212
id	ga0212
authors	Colakoglu, Birgul
year	2002
title	An Informal Shape Grammars for Interpolations of Traditional Bosnian Hayat Houses in a Contemporary Context
source	International Conference on Generative Art
summary	This paper explores the use of an informal shape grammar method for Hayat house form interpolations. Interpolations are new house forms, which carry stylistic characteristics of an existing design language but are inserted into a context, which responds to a contemporary life style. The study is based on a corpus of eight Hayat houses designed in the classic Ottoman style in the 18th and 19th century in Sarajevo. The hayat is a large shaded gallery open to the garden. It occupies the most important place in the composition of the plan. In this study, a form-driven design strategy is applied. The emphasis is given to new house form generation. The generation of a new house form within the grammar proceeds in four steps: (1) Primitive hayat house generation, (2) sub-house generation, (3) House variations, (4) House development. The shape rules used in the process of hayat house interpolations are mostly informal and explain in general terms how certain parts of the form are modified.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	b74f
authors	Dijkstra, Jan and Timmermans, Harry
year	2002
title	Towards a multi-agent model for visualizing simulated user behavior to support the assessment of design performance
source	Automation in Construction 11 (2) (2002) pp. 135-145
summary	We introduce the outline of a multi-agent model that can be used for visualizing simulated user behavior to support the assessment of design performance. We will consider various performance indicators of building environments, which are related to user reaction to design decisions. This system may serve as a media tool in the design process for a better understanding of what the design will look like, especially for those cases where design or planning decisions will affect the behavior of individuals. The system is based on cellular automata and multi-agent simulation technology. The system simulates how agents move around in a particular 3D (or 2D) environment, in which space is represented as a lattice of cells. Agents represent objects or people with their own behavior, moving over the network. Each agent will be located in a simulated space, based on the cellular automata grid. Each iteration of the simulation is based on a parallel update of the agents conforming local rules. Agents positioned within an environment will need sensors to perceive their local neighborhood and some means with which to affect the environment. In this way, autonomous individuals and the interaction between them can be simulated by the system. As a result, designers can use the system to assess the likely consequences of their design decisions on user behavior. We think that the system provides a potentially valuable tool to support design and decision-making processes, related to user behavior in architecture and urban planning.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	36d5
authors	Hanser, D., Halin, G. and Bignon, J.-C.
year	2002
title	Toward a user adaptive vision of architectural projects
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 238-245
doi	https://doi.org/10.52842/conf.ecaade.2002.238
summary	The architectural conception is a particular cooperation situation. One characteristic of this cooperation is a “mutual prescription” between actors through a specific relational organization. Then each actor keeps up specific relations with others people (designers, project managers,…) but also with documents and activities. The representation of such network, which characterizes each project, is the one of the objectives of the “Relational model”. The existing groupware tools can not be directly used in the framework of the architectural conception. They require a high level of definition of procedures and exchanges, which is incompatible with the flexibility of current practices. The second objective of this model is to give to each actor an adapted vision of the project evolution. This representation has to be adapted to the role and the participation of the actor at each moment of the project life cycle. We propose in this article an open hyperdocument structure based on a relational model of cooperation. Some experimental views and navigations are exposed and commented. The integration of this new dimension allows to propose to the user an adapted vision of the project by taking into account the role he plays inside the project.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	d7b0
authors	Kvan, Thomas and Kolarevic, Branko
year	2002
title	Rapid prototyping and its application in architectural design
source	Automation in Construction 11 (3) (2002) pp. 277-278
summary	At the beginning of the 20th century, the clarion call of the Modern Movement was sounded to awaken architects to the purity and clarity of engineered and manufactured goods. In this aesthetic, the house was to be considered a manufactured item, drawing upon scientific and engineering logic for the design to be clarified and reduced to the essential. Mass production of the house would bring the best to a widemarket and design would not cater to the elite. At the start of the 21st century, the goal remains, although reinterpreted, with the process inverted. No longer does factory production mean mass production of a standard item to fit all purposes, i.e., one size fits all. Instead, we now strive for mass customization, bringing the benefits of factory production to the creation of a unique component or series of similar elements differentiated through digitally controlled variation.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6862
authors	Ozel, Filiz and Kohler, Niklaus
year	2002
title	Data Modeling Issues in Simulating the Dynamic Processes in Life Cycle Analysis of Buildings
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 187-195
doi	https://doi.org/10.52842/conf.acadia.2002.187
summary	Typically, in simulating the dynamic processes in buildings, data modeling efforts require the modelingof the building geometry, its components and the relationship between these components, as well asthe modeling of the process that is under study. For example, in simulating the life cycle of a building,one must simulate the flow of materials as well as the flow of information as part of the processmodeling, while a component model is needed to represent the building as an artifact. A third aspect ofthis modeling effort constitutes the simulation of human intervention, i.e. the decision process that mightaffect the nature of the building itself as well as the process that acts upon it. For example, the decisionto remodel a certain component clearly affects both the component itself as well as the process ofaging, when life cycle of buildings is simulated. This paper looks at the data modeling requirements ofthe simulation of building life cycle within the context of the three parameters mentioned above: datamodel for buildings; process models and decision models. Temporal issues in data modeling, such asversioning for components, keeping track of data that are related to change and remodeling, andbuildings as temporal-spatial entities for life cycle analysis purposes are also addressed.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ga0208
id	ga0208
authors	Wang, Xu and Lau, Siu Yu
year	2002
title	Pursuing New Urban Living Environment In The New Millennium: Projecting The Future Of High-Rise And High Density Living In Hong Kong
source	International Conference on Generative Art
summary	High-rise and high density living is a way of life for most of the 6.7 Million population of Hong Kong. The merits and demerits affiliated with Hong Kong’s compact urban form continues to attract academic deliberations and debates over the acceptability of such urban form as an alternative to urban sprawl for future city and urban life-style. This paper traces the development and causes for Hong Kong’s high-rise and high-density urban form over the past fifty years or so, and focuses its discussions on the pros and cons of high-rise living based on subjective user survey in late 2001 and early 2002. Because of an articulated land shortage, acute topography, escalating population growth, and shortage of time, Hong Kong government and planners have little options left but to adopt vertical development, resulted in a densely and mixed use urban habitat packed with closely built high-rise residences and commercial buildings. From the survey, it is clear that mixed and intensive land use, high quality of living and recreation infrastructure, efficient public transportation network, and segregation of pedestrian and traffic can facilitate the performance of compact urban form. In addition, most of Hong Kong families have been accustomed to high-rise living pattern and the disadvantages such living pattern might cause on its resident’s social communication and children education are readily ignored by most of the people. Based on the analysis of current living situation and development trends in Hong Kong, new pattern of future city form is conceived to be a likely applicable development way in a coastal city with such high density as Hong Kong in the next 50 years. Design countermeasures are presented in this paper to suggest ways of alleviating the pressure of the forever-increasing house requirements in Hong Kong. high-density, high-rise, compact city, social acceptance, life-style.
keywords	high-density, high-rise, compact city, social acceptance, life-style
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	cc97
authors	Zhou, Q., Krawczyk, R.J. and Schipporeit, G.
year	2002
title	From CAD to iAD - A Web-based Steel Consulting of Steel Construction in Architecture
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 346-349
doi	https://doi.org/10.52842/conf.ecaade.2002.346
summary	Information technology has become so powerful that what is conventionally called CAD might evolve to iAD (Internet Aided Design) (Zhou 2000). For Internet applications in the AEC industry, most of the efforts and success have been concentrated on project management and collaboration, while in the design and engineering consulting area, limited progress has been made. At the same time, contemporary development has not changed the nature of the fragmentation of the AEC industry. Based on previous research of surveys of development of Internet applications in the AEC industry (Zhou 2001), and the proposal of conceptual model of Internet-based engineering consulting in architecture (Zhou2002), we try to apply these theories and concepts into a specified area, steel construction consulting for architects. In previous research, first of all, we defined the contents and scope of steel construction consulting and their potential application. Second, we proposed a solid working model covering structure organization, audience, services provided and technology. In this research, a web-based application will be out by prototyped by conducting a conceptual design consulting in steel structure in order to show the whole process of how this Internet-based consulting model works.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	946b
authors	Zhou, Q., Krawczyk, R.J. and Schipporeit, G.
year	2002
title	From CAD to IAD: A Working Model of the Internet-based Engineering Consulting in Architecture
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 073-80
doi	https://doi.org/10.52842/conf.caadria.2002.073
summary	Information technology has become so powerful that what is conventionally called CAD might evolve into iAD (Internet Aided Design) in the near future (Zhou 2000). For Internet applications in the AEC industry, most of the efforts and success have been concentrated on project management and collaboration, while in the design and engineering consulting area, limited progress has been made. During the period of Internet development, the nature of the fragmentation of the AEC industry has not been changed. Based on previous research of surveys of development of Internet applications in the AEC industry (Zhou 2001), and the study of information technology both available today and in the near future, we propose a general abstracted model of an Internet-based consulting system by integrating a variety of disciplines and functions of design and construction processes. This model will cover a range of design phases, such as, information gathering, automatic remote consultation, specific problem solving, and collaboration. Finally, in future follow up research, we will apply the proposed model to steel construction in architectural design, and develop a prototype simulation by selecting one type of structural system.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	sigradi2010_73
id	sigradi2010_73
authors	Hunold, Lara Arthur; Gorge Canella Eduardo; Giacaglia Marcelo Eduardo; Corrêa Norberto; Moura da Silva
year	2010
title	Brinquedos, modelos: uma atividade lúdica se transforma em curricular com apoio das novas tecnologias de fabricação digital [Toys, models: a fun activity becomes curriculum, supported by new digital fabrication technologies]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 73-76
summary	This research seeks to assess the use of digital fabrication of toys reusing wood from earlier models produced in undergraduate courses in architecture and design. Froebel (2002) discusses the pedagogical application of blocks of wood that he created, inspired by the information that the architect Frank Lloyd Wright was influenced in his childhood by playing with toy blocks. Among other authors, we found a catalog from the Aladdin factory that is owned by Uruguayan modern artist Torres Garcia. The research aimed to recreate similar educational toys within a context of global crisis and interest in sustainability.
keywords	design education; design methodology; digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ddssar0217
id	ddssar0217
authors	Kacher, S., Bignon, J.C., Halin, G. and Duffing, G.
year	2002
title	The Content-Based Image Retrieval as an Assistance Tool to the Architectural Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	The architectural design requires a research of ideas and a documentation to help the designer in its creation work. It is a domain where the use of pictures (drawing, photography,…) is essential, because the information transmitted by photographic images are often more easily to understand than the one transmitted by texts. The goal of this work is to show the help that can bring the research of pictures indexed by visuals criteria, as colour, texture and shape, in the architectural design domain. If weaccept the principle that " an image is better than 10000 words ", we can make the hypothesis that an image research indexed by visual criteria can bring a supplementary help to the designer when he tries to resolve design problems. We tested a research tool resting on image indexation with graphic attributes. Two types of corpora have been used. The first one contains images illustrating building products and the second one shows buildings or parts of buildings, which illustrate the wood architecture domain. The objective of this experiment is to evaluate the relevance of this type of image indexing according to identified users needs. We try to determine which type of visual criteria is the most appropriate to help the designer in the various phases of the design process.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: