Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 439

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2003_036
id	sigradi2003_036
authors	Donath, Dirk and González, Luis Felipe
year	2003
title	Rule-based spaces configuration procedures to support user-designed housing
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This article reports on our current explorations on systemizable tasks of architectural design and parametric design supported by rule-based generation methods of spatial configuration alternatives to assist user-design processes of progressive development low-cost dwellings. This exploration is part of an ongoing major research towards an integrated planning support system for low-income housing; we called Esther, which is focused on the development of a network-based set of tools to support logistics of self-designed /-built dwellings life-cycle. Esther addresses the systemized collaborative work between dwellers and specialists during the whole development cycle of dwellings.
keywords	Planning tool; user-designed housing; parametric design; decision support; adaptable dwelling
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
doi	https://doi.org/10.52842/conf.ecaade.2004.024
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	ecaade03_369_112_akgun
id	ecaade03_369_112_akgun
authors	Akgun, Yenal
year	2003
title	An Interactive Database (HizmO) for Reconstructing Lost Modernist Izmir:
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 369-372
doi	https://doi.org/10.52842/conf.ecaade.2003.369
summary	The research project in progress in the School of Architecture at the Izmir Institute of Technology includes documentation and reconstruction (by 3D modeling in electronic media) of damaged and lost early modern buildings in the Izmir region. The research aims to analyze the differences between Izmir modern buildings and Universal Modern Style, and preserve information on architectural heritage for future generations. The project is at the phase of developing an interactive web-based historical database (HizmO) that includes data (information, images, technical drawings, VRML models) and visualization of the findings. This database aims to be a pioneer in Mediterranean Region for exhibition of relations between traditional architecture (especially Mediterranean locality) and modernism, and organization of a network and off-campus learning activity for Mediterranean architecture that serve as a guide for students, researchers and architects. This paper aims at introducing this research and discussing the application of the database “HizmO,” its aims and potential effects on education in architectural history.
keywords	E-learning, educational database, architectural history, VRML
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2003_119
id	sigradi2003_119
authors	Bermudez, J., Foresti, S., Agutter, J., Westenskow, D., Syroid, N. Drews, F. Tashjian, E. and Adams, V.
year	2003
title	Metodología Interdisciplinaria para Diseñar Nuevas Arquitecturas de Representación de Datos (Interdisciplinaria Methodologies for the Design of a New Architectures of Data Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Data representation architecture can be defined as the organizational, functional, experiential, formal, and media-technological order defining the interaction between data, representation, and user. This paper presents an interdisciplinary methodology to develop such architectures in order to significantly improve real time decision making in complex data environments. We have reported in some aspects of this work elsewhere. In this occasion, we will describe our working methodology based on complete interdisciplinarity, the design process and evaluation protocols. We will show work done for Finance and Network Monitoring. Our long-term goal is to design a new generation of data representation architectures that is applicable to diverse fields.
keywords	Data representation; visualization; design, architecture, interdisciplinary
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2003_a1-2
id	caadria2003_a1-2
authors	Bunyavipakul, Monchai and Charoensilp, Ekasidh
year	2003
title	Designing the Virtual Design Studio System for Collaborative Work on Pda Collaborative Works Anytime, Anywhere
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 43-54
doi	https://doi.org/10.52842/conf.caadria.2003.043
summary	This research presents the collaboration in the VDS system through a microcomputer technology- a PDA (Personal Digital Assistants). Architect can collaborate anytime anyplace via VDS, a substitution to an old system that requires a specific location to work on. This research has studied and analyzed the format and the limitation of collaboration between PDA and Personal Computer, the wireless communication technology, and the Web Service technology, which enable different devices to share information through the Internet Network. The work process and the studied information have been used to develop a Web Application, a collaboration tool for a team of architect and designer. This Web Application has been tested in a renovation project, a clubhouse for a scuba diving place The objective of this research is to become a guideline of collaboration in architectural design work through Smart Object in order to serve the coming Ubiquitous era (Weiser, 1998)
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ee5c
id	ee5c
authors	D Gunaratnam, T Degroff and JS Gero
year	2003
title	IMPROVING NEURAL NETWORK MODELS OF PHYSICAL SYSTEMS THROUGH DIMENSIONAL ANALYSIS
source	Journal of Applied Soft Computing 2(4): 283-296.
summary	The paper presents a technique for generating concise neural network models of physical systems. The neural network models are generated through a two-stage process. The first stage uses information embedded in the dimensions or units in which the data is represented. Dimensional analysis techniques are used initially to make this information explicit, and a limited search in the neural network architecture space is then conducted to determine dimensionless representations of variables/parameters that perform well for a given model complexity. The second stage uses information available in the numerical values of the data to search for high-level dimensionless variables/parameters, generated from simple combinations of dimensionless quantities generated in the first stage and which result in concise neural network models with improved performance characteristics. The search for these high-level dimensionless variables/parameters is conducted in an enhanced representation space using functional link networks with flat or near flat architectures. The use and effectiveness of the technique is demonstrated for three applications. The first is the design and analysis of reinforced concrete beams, which is representative of the class of problems associated with the design and analysis of composites. The second is the classical elastica problem, for predicting non-linear post-buckled behaviour of columns and the third, the analysis of a bent bar under a specified combination of loads.
keywords	neural networks, dimensional analysis
series	journal
type	normal paper
email
last changed	2004/04/10 01:57

_id	ijac20031303
id	ijac20031303
authors	Donath, Dirk; Richter, Katharina; Hansen, Stefan
year	2003
title	Internet based support for architectural planning processes
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	As building projects become increasingly more complex, the number of project participants grows as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project described here is based upon this approach and also takes it a step further. A specific analysis of the topic and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2003_123
id	sigradi2003_123
authors	Egler, Tamara
year	2003
title	Redes tecno-sociais e ação coletiva (Techno-social nets and collective action)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This study intends to examine the possibilities given by the information technologies for the development of techno-social nets mediated by computers, which makes possible a new kind of collective, a net of individuals in continual communication, for the formation of new spaces of collective action.
keywords	space; network; comunication; colective action; social
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	heyhlighenijdc2003
id	HeyhlighenIJDC2003
authors	Heylighen, Ann and Segers, Nicole
year	2003
title	Look Who's Suggesting
source	International Journal of Design Computing, 2003, Volume 6
summary	During design architects do not only sketch, they combine different kinds of information and representations. The combination of text, image, sketch and/or draft can provoke new associations that keep the design process going. The sketchbook presented here enables architects to use all representations simultaneously, so as to fully exploit their cross-fertilisation. More importantly, it steadily makes suggestions for continuing development of design ideas. These suggestions can take the form of words that are semantically related to the users’ ideas, or of images showing how other architects have developed related ideas into built artefacts. To this end, the sketchbook captures all information the architect/user puts ‘on paper’ and forwards it to a design idea recorder/interpreter called Idea Space System (ISS). In trying to understand the user’s ideas, ISS places all elements captured into a gigantic network, as if part of the frame of reference is made explicit. In the network nodes are words, sketches or images, while links represent relations of various origins. The semantic relations that ISS identifies are shown to the user. At the same time, words are processed as search criteria in DYNAMO, a growing architectural case base, to detect and display design projects that exemplify related ideas. Through the explicit links between early ideas and concrete design cases, the sketchbook acts as a permanent source of inspiration, while stimulating both architects’ creativity and their awareness of the downstream implications of design ideas.
series	journal paper
email
more	http://www.arch.usyd.edu.au/kcdc/journal/vol6/
last changed	2004/03/25 17:51

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
doi	https://doi.org/10.52842/conf.caadria.2003.811
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	avocaad_2003_13
id	avocaad_2003_13
authors	John L. Heintz
year	2003
title	Communication and Value in Networked Design Coalitions
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The advent of the Internet has led us to believe that we live in an era of unprecedented globalization. In the field of building design, we now expect both that the local market for design services will be altered, and that many firms will take up the opportunity to pursue commissions beyond their local market. To some extent this is true, but it is instructive to recall that in the 19th century London based architectural firms and public works designers designed buildings throughout the Empire. Designing for projects beyond the local market is not new, what is new is our expectation that such a task is now fundamentally altered, made easier and more transparent, by the abundance of new communications technologies.It remains the case that working outside one’s local context is difficult and that when doing so, problems are likely to arise out of cultural differences. Distance too imposes its burdens, as the possibility to meet other members of the team face to face is reduced as the travel costs increase. This breaks down the possibilities of building informal networks among the individual designers working for the firms that are members of the design team. A re-instantiation of this informal network can only be done on the basis of a model of formal and informal communication in the design team. Many of the difficulties of collaborative work outside one’s local market are problems that have already been with us a long time. These problems arise out of the fact that buildings are designed by heterogeneous groups of people. The members of such groups must communicate with each other to share information and coordinate decisions and actions. Yet they are in different relations to the project at hand and have differing values arising out of their different backgrounds. This leads inevitably to conflict. Therefore, if we are to discuss communication and value then we must devote our attentions to conflict.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design, Communication, values, informal communication, value resolution, design team, design coalition.
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	caadria2003_b4-1
id	caadria2003_b4-1
authors	Kuo, Chung-Jen
year	2003
title	Spatial Analysis of Chinese Garden Designs with Machine Learning
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 541-552
doi	https://doi.org/10.52842/conf.caadria.2003.541
summary	This research intends to propose a scheme for analyzing Chinese Garden Design by incorporating spatial theory, data mining, concept of object, and network-like data structure. Design elements of Chinese garden are placed in a network according to the existing gardens according to spatial theory. Collected networks are then divided into pair of elements connected by their relationship and stored in a database. Later, data mining is applied to attain patterns from the node-and-relationship pairs. Meanwhile, the elements of the same level can be classified and data grouping can be done by the implementation itself. Thru this research, we can gain insight upon the spatial information and relationship between elements of Chinese garden designs. The result is a set of more concise and structural descriptions, which reveals the rhythm behind the Chinese garden design and can be a great pedagogical aid.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	2004_058
id	2004_058
authors	Lai, Ih-Cheng and Chang, Teng-Wen
year	2004
title	Dynamic Interactions Between Users and Information in a Co-existence Space
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 58-65
doi	https://doi.org/10.52842/conf.ecaade.2004.058
summary	By exploring interactions between users and information, this paper intends to propose a co-existence framework for companying physical space with virtual space. Based on this framework, we implement an information structure for users to interact with information space interactively, which includes information nodes, hyperlinks and interplays through i-Room system (Chang and Lai, 2003). Furthermore, the information structure of representation is also tested and reevaluated in representing ten historical significant civic buildings in Taiwan.
keywords	Co-Existence, Digital Media, Information Space, Virtual Space
series	eCAADe
last changed	2022/06/07 07:52

_id	acadia03_051
id	acadia03_051
authors	Lim, Chor-Kheng
year	2003
title	G Pen: An Intelligent Designer’s Playmate
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 403-409
doi	https://doi.org/10.52842/conf.acadia.2003.403
summary	In the field of design the pen-based system is a newly developed computer interface that provides the designer with the convenience of a pen in freehand sketches. But these pen-based systems only focus on an interface familiar to the designers and the application of the hardware and software that go with it, treating the pen only as a mouse-like input device. As pen and pad are devices for the pen-based system, the hope is that they can be endowed with more intelligent characteristics to let them interact with designer’s gestures and become a creative source for the designers, while simultaneously preventing the design fixation encountered by designers during design process. This research utilizes the unintentional hand gestures made by designers, such as the designer’s grip of the pen or movement involved in playing with the pen, putting it down, knocking it, twisting it or shaking it, during the thinking process or when running into a design fixation. From the interaction between the pen and the pad, certain actions may be generated to stimulate the designer’s thinking process. This research uses a neural network as the main learning mechanism for the eventual development of a prototype of a pen-based drawing system that provides timely visual stimulation: a G Pen system.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2004_292
id	2004_292
authors	Modeen, Thomas
year	2004
title	Using Solid Freeform Fabrication for the Conceptualization and Corporeal Actualization of Architecture
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 292-301
doi	https://doi.org/10.52842/conf.ecaade.2004.292
summary	This paper forms an update to the paper presented ar eCAADe 2003, in Graz. It is a summary of a project which aim is to suggest an alternate methodology for utilizing additive Solid Freeform Fabrication (more commonly known as Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive SFF production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Whereas the paper in Graz introduced the conceptual foundations and the taxonomy of the project, the aim in this years paper is to present some of the realized designs and discuss, in brief, how what has been learnt could be furthered as the project proceeds. The three designs described in more detail in the paper, all catalyzed by a specific sensory notion, would have been very difficult, if not impossible, to fabricate by any other means than additive Solid Freeform Fabrication.
keywords	Architecture, Design, Solid Freefrom Fabrication, Senses
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ijac20031104
id	ijac20031104
authors	Petric, Jelena; Ucelli, Giuliana; Conti, Giuseppe
year	2003
title	Real Teaching and Learning through Virtual Reality
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper addresses an articulated vision of Virtual Reality, which lends itself to design collaboration in teaching, learning and communication of architectural design ideas among students, design professionals and client bodies during the early stages of the design process. Virtual Reality (VR) has already acquired a new degree of complexity through development of network-based virtual communities and the use of avatars. A key intrinsic quality of VR technology is to support collaborative design experience. The design tools developed for this experiment are capable of creating 3D objects in a shared VR environment, thus allowing the design and its evolution to be shared.The choice of programming language (JavaTM) reflects the desire to achieve scalability and hardware independence, which in turn allows for the creation of a VR environment that can co-exist between high-end supercomputers and standard PCs. The prototype design environment was tested using PC workstations and an SGI system running in a Reality Centre.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia03_050
id	acadia03_050
authors	Schubert, Frieder and Lurz, Philipp (et al.)
year	2003
title	Physical Simulation in a VR Tool for Urban Design
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 395-401
doi	https://doi.org/10.52842/conf.acadia.2003.395
summary	Physical influences on a city, such as noise, light, air flow, and solar energy quantities, can already be simulated on computers; however, these simulations are usually not embedded into the urban planning process. Regarding a broad field of these influences and their correlations will improve the quality of the design. The use of simulations in the sketching stage provides the possibility of reacting accordingly for the urban planner, which is essential for sustainable design. This paper describes the development of a virtual reality tool for the early urban design process, in which we realized a network connection between a software package calculating noise propagation in urban spaces and a virtual reality design environment. In this dynamic VR design tool, it is possible to experiment with simple geometric forms and objects (these objects can be added to constructions, removed, and transformed). Interactively, with each action of the planner, simulations are generated and visualized in the VR environment in real-time. The last part of the paper describes our concept, how this VR design tool should be integrated in the study of urban planning, and how we want the students to get a sense for the impact of their design on physical phenomena in an urban scale.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	acadia03_012
id	acadia03_012
authors	Seebohm, Thomas and Temkin, Aron
year	2003
title	CONNECTED COURSES: METHODS OF NETWORK COMMUNICATIONS
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 94-98
doi	https://doi.org/10.52842/conf.acadia.2003.094
summary	Where are we now?In the recent NJIT survey of digital media in the design schools twenty-eight out of twenty-nine architecture schools reported to have networked design studios (NJIT, 2003). This would seem to indicate a ubiquity of digital media tools. While the use of these tools is still often limited to design presentation (computer aided drawing and modeling) rather than design generation, the studio is historically a place of discovery and experimentation: with computers so available in this fertile environment we are poised to evolve the medium forward towards improved design development. This evolution is initially apparent in the way presentation methods and presentation processes are shifting. Not only are students becoming increasingly digital in their approach to design, but methods of working and presentation are also changing.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia03_032
id	acadia03_032
authors	Senagala, Mahesh
year	2003
title	Digital Theory
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 254
doi	https://doi.org/10.52842/conf.acadia.2003.x.u6f
summary	The computer has gone from being an isolated box to become part of a gigantic digital network of networks that shapes our collective future. The way and pace at which we connect, communicate, memorize, imagine and control the flows of valuable information have changed forever. There are at least six digital phenomena that directly affect the architectural world: miniaturization (of all that can be shrunk), ubiquity (being everywhere, global), realtime (communing globally in realtime, which is 1/10th of a second), noospherization (networking every-thing), virtuality (all that is solid melts into knowledge), and anamnesia (inability to forget). Temporal contiguity and temporal connectivity have taken precedence over spatial and geographical contiguity. The strands that animate our life today emanate from spatially distant but temporally contiguous/connected places. These phenomena have squeezed, stretched, restructured, reconfigured, and redistributed most major human institutions. Consequently, the built world’s role, importance and nature have changed. Architecture as traditionally understood has become more marginalized than before. Many practices, however, have been repositioning themselves to take advantage of the new opportunities beyond the bounds of traditional architectural practice. Design, practice, fabrication and construction are increasingly becoming networked affairs. The new measures of architecture are connectivity and speed. The architecture of a new world needs to recognize these transformations and think differently.
series	ACADIA
email
last changed	2022/06/07 07:49

For more results click below: