Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 6 of 6

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade03_059_29_russel
id	ecaade03_059_29_russel
authors	Russell, P., Stachelhaus, T. and Elger, D.
year	2003
title	CSNCW: Computer Supported Non-Cooperative Work Barriers to Successful Virtual Design Studios
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 59-66
doi	https://doi.org/10.52842/conf.ecaade.2003.059
summary	The paper describes a design studio jointly undertaken by four Universities. With respect given to the groundbreaking work carried out by [Wojtowicz and Butelski (1998)] and [Donath et al 1999] and some of the problems described therein, the majority of the Studio partners had all had positive, if not exemplary experiences with co-operative studio projects carried out over the internet. The positive experience and development of concepts have been well documented in numerous publications over the last 5 years. A platform developed by one of the partners for this type of collaboration is in its third generation and has had well over 1000 students from 12 different universities in over 40 Projects. With this amount of experience, the four partners entered into the joint studio project with high expectations and little fear of failure. This experimental aspect of the studio, combined with the “well trodden” path of previous virtual design studios, lent an air of exploration to an otherwise well-worn format. Everything looked good, or so we thought. This is not to say that previous experiments were without tribulations, but the problems encountered earlier were usually spread over the studio partners and thus, the levels and distribution of frustration were more or less balanced. This raised a (theoretically) well-founded expectation of success. In execution, it was quite the opposite. In this case, the difficulties tended to be concentrated towards one or two of the partners. The partners spoke the same language, but came from different sets of goals, and hence, interpreted the agreements to suit their goals. This was not done maliciously, however the results were devastating to the project and most importantly, the student groups. The differing pedagogical methods of the various institutes played a strong role in steering the design critique at each school. Alongside these difficulties, the flexibility (or lack thereof) of each university’s calendar as well as national and university level holidays led to additional problems in coordination. And of course, (as if this was all not enough), the technical infrastructure, local capabilities and willingness to tackle technological problems were heterogeneous (to put it lightly).
keywords	CSCW: Virtual Design Studio; Mistakes in Pedagogy
series	eCAADe
email
more	http://caad.arch.rwth-aachen.de
last changed	2022/06/07 07:56

_id	sigradi2003_036
id	sigradi2003_036
authors	Donath, Dirk and González, Luis Felipe
year	2003
title	Rule-based spaces configuration procedures to support user-designed housing
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This article reports on our current explorations on systemizable tasks of architectural design and parametric design supported by rule-based generation methods of spatial configuration alternatives to assist user-design processes of progressive development low-cost dwellings. This exploration is part of an ongoing major research towards an integrated planning support system for low-income housing; we called Esther, which is focused on the development of a network-based set of tools to support logistics of self-designed /-built dwellings life-cycle. Esther addresses the systemized collaborative work between dwellers and specialists during the whole development cycle of dwellings.
keywords	Planning tool; user-designed housing; parametric design; decision support; adaptable dwelling
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade03_527_71_donath
id	ecaade03_527_71_donath
authors	Donath, Dirk and Weferling, Ulrich
year	2003
title	Digital building surveying and planning Integrative approaches with commercial object-oriented CAAD systems
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 527-532
doi	https://doi.org/10.52842/conf.ecaade.2003.527
summary	As a result of growing activity in the field of renovation and building within existing built contexts, modern digital tools and methods are increasingly in demand. Support of the planning process means: the step-by-step capture of building-relevant information, a rule and parameter-based development of solutions and the combination of traditional and automated methods and technologies used for model creation (building surveying) and model transformation (planning). This article discusses general requirements and the results from our own research and development as well as illustrating how building surveying can already contribute to the planning process more effectively using currently available tools.
keywords	Planning, Building surveying, Process model, CAAD, IT-planning tools, renovation, 3D-model, information systems
series	eCAADe
email
more	http://infar.architektur.uni-weimar.de
last changed	2022/06/07 07:55

_id	ijac20031303
id	ijac20031303
authors	Donath, Dirk; Richter, Katharina; Hansen, Stefan
year	2003
title	Internet based support for architectural planning processes
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	As building projects become increasingly more complex, the number of project participants grows as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project described here is based upon this approach and also takes it a step further. A specific analysis of the topic and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2003_014
id	sigradi2003_014
authors	Russell, P., Jackson, M. and Dieckmann, A.
year	2003
title	Separated at Birth
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	While distributed or collaborative design studios have a long pedigree (Donath 1999), there seldom arises the chance to test the limits of the concepts implied by the idea of the physically separated design team. The indigenous differences of culture, schedules and language accentuate this. The authors entered into an experimental design exercise that would seek to explore the range of dualities, which are often encumbered by such studios owing to their very nature. As an additional catalyst in the experiment, a design topic was chosen which reflected the nature of the studio thereby creating a Gödelian knot of self-referentiality.
keywords	Virtual Design Studio; CSCW; Distributed Practice; Intensive Learning
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ijac20031102
id	ijac20031102
authors	Seichter, Hartmut; Donath, Dirk; Petzold, Frank
year	2003
title	TAP - The Architectural Playground: A C++ Framework for Scalable Distributed Collaborative Architectural Virtual Environments
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Architecture is built information [1]. Architects have the task of restructuring and translating information into buildable designs.The beginning of the design process, where the briefing is transformed into an idea, is a crucial phase in the design process. It is where the architect makes decisions that influence the rest of the design development process [2]. It is at this stage where most information is unstructured but has to be integrated into a broad context.This is where TAP is positioned - to support the architect in finding solutions through the creation of spatially structured information sets without impairing creative development.We want to enrich the inspiration of an architect with a new kind of information design. A further aspect is workflow in a distributed process where the architect's work becomes one aspect of a decentralised working pattern. The software supports collaborative work with models, sketches and text messages within a uniform environment.The representations of the various media are connected and combined with each other and the user is free to combine them according to his or her needs.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

No more hits.