Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 6 of 6

Reformat results as: short short into frame detailed detailed into frame

_id	cf2003_m_062
id	cf2003_m_062
authors	JUNG, T., GROSS, M. D. and DO, E. Y.-L.
year	2003
title	Light Pen - Sketching Light in 3D
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 327-338
summary	We describe a lighting design system driven by sketching on 3D virtual models. Conventional lighting design tools simulate the lighting effects of design decisions such as window locations, surface treatments, and fixture placement. Light Pen takes the inverse approach by allowing the designer to indicate desired illumination on a 3D model. This serves as input to a knowledge-based lighting design system, which recommends what lights to use and where to place them, based on the designer's expressed intentions and on the geometry of the space.
keywords	knowledge-based, lighting, sketch, virtual environment
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	cf2005_2_52_159
id	cf2005_2_52_159
authors	SHIH Naai-Jung and WU Ming-Chang
year	2005
title	A 3D Point-cloud-based Verification of As-built Construction Progress
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 193-202
summary	Point clouds were overlapped to reveal differences between two working days. The same type of comparison was made between 2003.2.11 and 2003.12.11. Comparisons between the original schedule and real schedule (the catch-up schedule) were also made. The overlapping test provides one of the most comprehensive checking methods of the as-built progress in a digital format. Examples show that the overlapping comparisons help identify the addition and removal of objects scanned from 50 meters away. The geometric information is feasible for construction inspection and records. Limitations and benefits of overlapping are discussed.
keywords	3D scan, construction technology, schedule
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	cf2003_m_083
id	cf2003_m_083
authors	SHIH, Naai-Jung
year	2003
title	A Construction Site in a Scan-based Digital Representation
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 423-432
summary	This study offers a method for creating a representation of an on-going construction site by using a geometric approach. The representation includes the definition of 3D data between the design and construction stages. A method is proposed for using a 3D longrange laser scanner to retrieve information on site occurrences, in order to describe the building construction process based on what really occurs at a site. 3D scans are made in stages or at various time intervals. Retrieved shapes are collected in a discrete manner or in a configuration as a whole. The data collection can be conducted wholly or selectively for key referencing based on registration points. Investigated issues involved are target positioning, identification, retrieval, tracking of objects, behaviour description, characteristic description, and integration of segmental geometric information.
keywords	construction, representation, scan
series	CAAD Futures
last changed	2003/09/22 12:21

_id	ecaade03_347_163_shih
id	ecaade03_347_163_shih
authors	Shih, Naai-Jung
year	2003
title	The Application of Color-image-mapped Rapid Prototyping in Architectural 3D Modeling
doi	https://doi.org/10.52842/conf.ecaade.2003.347
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 347-350
summary	The purpose of this study is to present an application of an RP machine in the substantiation of architectural design concepts, using color image mapping to enhance visual details. Related visualization leads to the exploration and comprehension of shapes. Exemplification can be seen in the verification for proofing or documentation of as-built models, such as paper architecture, process modeling, furniture, partitions, and construction details. The influences on architecture reveal issues related to pedagogical exploration, interdisciplinary exploration, reality management, and visual detail and structural detail.
keywords	rapid prototyping; 3D printer; 3D modeling
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia03_009
id	acadia03_009
authors	Shih, Naai-Jung
year	2003
title	Digital Architecture - What Would 6000 Points Turn Out To Be?
doi	https://doi.org/10.52842/conf.acadia.2003.067
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 67-73
summary	This paper presents students’ fulfillment of an assignment that explored the concepts of digital architecture using rapid prototyping (RP) process. A point cloud was given to students, and different representational data were substantiated as real 3D physical models. The presence of RP models and the sequential illustration of working steps in their reports revealed that the control of shapes often differed from what students perceived in VR worlds. The results thus confirm that physical models are useful for visualization as well as in design pedagogy.
series	ACADIA
email
last changed	2022/06/07 07:56

No more hits.