Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 76

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2003_c3-4
id	caadria2003_c3-4
authors	Maneesatid, Preecha and Szalapaj, Peter
year	2003
title	The Role of CAD in Environmental Building Science
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 487-502
doi	https://doi.org/10.52842/conf.caadria.2003.487
summary	The fundamental requirement of all building design is the provision of shelter from the external climate and, if possible, the modification of environmental factors generated by this climate to create an internal environment suitable for human comfort. The environmental design strategies of modifying climate derive from the requirements of creating human comfort in buildings, using the elements of the natural climate which vary throughout the year depending upon the prevailing climatic conditions. Environmental Building Science (EBS) research and practice has investigated various techniques to increase architects' performance in environmental building design. These technical design options are also available to architects to take advantage of the external environment. Most environmental design techniques rely on convectional forms of passive environmental design, and building material and system. But it hardly begins to address the more complex demands of environmental building design issues in the buildings. Particularly, testing environmental design techniques against physical models requires much input data which is not available in the early design stages, and is time consuming to use. This forces architects to work with many design parameters that are not compatible with their activities. It is consequently difficult to observe the interrelation of design techniques with design development. The most important role of Computer Aided Design (CAD) is to integrate wider varieties of input data requirements, modelling with EBS properties, output representations with EBS knowledge and assistance tools for optimisation tasks in environmental design issues.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade03_319_147_szalapaj
id	ecaade03_319_147_szalapaj
authors	Szalapaj, Peter J.
year	2003
title	Architectural GIS: Interoperable and Integrated Information Environments
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 319-325
doi	https://doi.org/10.52842/conf.ecaade.2003.319
summary	This paper investigates ways of bringing together the existing GIS techniques of spatial analysis with emerging object-based computer modelling and presentation methods. The end product is Architectural GIS: computer systems that can be applied to the analysis and evaluation of both rural and urban environments. The paper will focus on the various ways in which information is represented, and the spatial analysis techniques that form the basis of mainstream GIS.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia03_058
id	acadia03_058
authors	Cerone, J. and Johnston, S.
year	2003
title	Elementary School: The Design Process
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 430
doi	https://doi.org/10.52842/conf.acadia.2003.x.f3n
summary	Although the fi nal presentation documents were all either generated orprocessed by computer, the steps leading to a fi nal product were theresult of constant interaction between computer and paper. The processbegan on paper with quick sketches of the main grid elements—the mostfundamental pieces of the “kit of parts”.
series	ACADIA
last changed	2022/06/07 07:49

_id	caadria2003_c2-1
id	caadria2003_c2-1
authors	Chevrier, C., Bur, D. and Perrin, J. P.
year	2003
title	Architecture as a Reference for the Development of A Cad Lighting Tool
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 281-294
doi	https://doi.org/10.52842/conf.caadria.2003.281
summary	As light is increasingly perceived as a factor of quality of urban life, it is not surprising that cultural heritage buildings and even civil engineering works are being more and more often illuminated at night. The designers of the projects are revealing a nocturnal vision of the buildings which is often a reflection of the architecture: rhythm, pattern, evenness, symmetry, composition, axes, and so on. The idea of developing a "lighting-modeller" is based upon this assertion. Thus, if we express the needs in terms of functionalities, we can conclude that the hierarchical structure of the architectural edifice can fit in with a "lighting-structure". As a result, concepts like hierarchy, linking, grouping, networking, linearity-polarity, are the basis of the objects and functions that are effective for the great majority of buildings and projects. This "lighting-modeller" can then lead beyond its simulation capabilities to become a design conception tool: hypothesis and variants are quickly realized and tested, and technical data (illumination data, visual comfort) can be obtained as well.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	acadia03_039
id	acadia03_039
authors	Clayton, Mark J.
year	2003
title	Connecting Digital Tools
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 299
doi	https://doi.org/10.52842/conf.acadia.2003.x.p0b
summary	A decade ago, Bill Mitchell wrote “Chroniclers of our era may one day write ‘What was computer-aided design?’ To them, it will just be design.” Because of the proliferation of digital tools for design, we are rapidly forgetting that there was ever design before computing. Ask an undergraduate student to describe the design process. There is a good chance that the student will mention using CAD and 3D modeling. Ask a contractor how to practice the profession of building.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	cf2003_m_034
id	cf2003_m_034
authors	DING, L, LIEW, P.-S., MAHER, M.-L., GERO, J.S. and DROGEMULLER, R.
year	2003
title	Integrating CAD and 3D Virtual Worlds Using Agents and EDM
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 301-312
summary	This paper develops an overall architecture for integrating CAD and virtual worlds. The advantages of having access to the building model in a virtual world include the collaborative nature of the world. The EDM database as an object-oriented database is developed to establish a common object-oriented representation of building model, which can be accessed by both CAD systems and virtual worlds. The integration between CAD systems and an EDM database is implemented through the use of Industry Foundation Classes (IFCs) as an intermediate data model and the communication between the database and virtual worlds is developed through agents.
keywords	agents, IFC, virtual world
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	acadia03_061
id	acadia03_061
authors	Garofalo, D., Morgan, J. and Popma, J.
year	2003
title	Block 37
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 433
doi	https://doi.org/10.52842/conf.acadia.2003.x.e2j
summary	The proposal for Block 37 was envisioned to anchor the north end of State Street, forming an implied axis between the Harold Washington Library and the New Media Center. The two buildings share similar educational responsibilities for the public, offering a variety of programs and facilities. In addition, they also assume a related physical presence on their respective sites, due to a similarity in the size of the building programs.
series	ACADIA
last changed	2022/06/07 07:49

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade03_141_137_marques
id	ecaade03_141_137_marques
authors	Marques, S., Goulette, J.P. and Bonnal, D.
year	2003
title	Exploring design in cyberspace: a teaching experience
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 141-144
doi	https://doi.org/10.52842/conf.ecaade.2003.141
summary	The use and evolution of information and communication technologies (TIC) are changing human’s cultural, social, and material content. It regards not only the complexity of technology, but also the re-discussion of concepts concerning to several domains of knowledge, among them, architecture (theory, practice and teaching). The particular focus of this paper is to present an undergraduate teaching experience in a French School of Architecture (École d'Architecture de Toulouse). The course called FINC (“Forme, Information, Novation, Conception”), deals with new designers' attitudes exploring cyberspace. By concentrating on a critical approach of the ""reciprocal contamination"" between physical and virtual architecture, the aim of this course is to bring architectural students to face a new design experience: to explore the new cognitive and communicative environments of cyberspace, designing in a different conceptual and experimental environment.
keywords	Architecture; cyberspace; design; teaching
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2003_079
id	sigradi2003_079
authors	Orzechowski, M.A., de Vries, B. and Timmermans, H.J.P.
year	2003
title	Virtual Reality CAD system for non-designers
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In this paper we will summarize the development of a virtual reality system called MuseV3. This system allows the modification of a basic architectural design and thereby collects preference information about design variations. A technical description of the system as well as a summary of user evaluations is given. In addition, a brief explanation of the methods that were used to elicit user preferences will be given.
keywords	Virtual reality, Bayesian networks, user preferences, Desk-CAVE
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	b1f3
id	b1f3
authors	Rafi A, Karboulonis P, Fazidin J, Badrolhisham H
year	2003
title	Virtual environments in architecture and planning design: 4 possible approaches
source	International Journal of Design Computing
summary	Advancements in information retrieval (IR), local and wide area networks (LAN, WAN) and the Internet, human-computer interaction (HCI), and virtual reality (VR) technologies have enabled the emergence and availability of affordable real-time computer data visualisation and manipulation systems that can be deployed and interfaced to most Computer Aided Design (CAD) software systems. However, the rapid advancement and adoption of information visualisation in different areas is currently challenging VR system designers to formulate and deploy strategies and tools to effectively visualise, navigate and effectively communicate various types of information within a virtual environment (VE). A further problem relates to the fact that even within a single area or application the requirements are still diverse to the extent that different approaches and technologies still need to be employed before a satisfactory solution is reached. This paper presents four possible approaches in identifying and designing effective VR systems for architecture and planning design to allow the user to effectively communicate and share their experiences and ideas in a collaborative manner. It is also proposed that VEs should look beyond plain representations and reproductions of the real world environments that they portray and bear higher interpretation and expression values. The value of eliciting structuring and interfacing information and knowledge to a VE is also highlighted, as is the need for efficient database systems and CAD systems capable of exchanging information and data with VEs. Current efforts in prolonging the lifetime of VEs are being examined through four case studies that highlight the ever-escalating requirements that currently face VR researchers.
keywords	Virtual Reality, Virtual Environment, Collaborative Design
series	journal paper
type	normal paper
email
more	http://wwwfaculty.arch.usyd.edu.au/kcdc/ijdc/vol05/papers/rafiFrameset.htm
last changed	2006/09/29 03:05

_id	sigradi2003_073
id	sigradi2003_073
authors	Viarengo, P.G., Viarengo, J.J. and Stoddart, G.
year	2003
title	Seguimiento de procesos de proyectos de arquitectura (Follow-up of the processes of architecture projects)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Involved in what has been called IT Revolution, the area of Architecture Projects and the field of production, we are Professors interested in the potential of digital media in teaching-learning and production of the Architecture design process.
keywords	Architecture; Project Status; Digital; Teaching
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	acadia03_002
id	acadia03_002
authors	Anders, Peter
year	2003
title	Four Degrees Of Freedom
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 17
doi	https://doi.org/10.52842/conf.acadia.2003.x.s7a
summary	Letting go is hard to do. Remember back to when, after months of trying, you let go of the handlebars of your bicycle and sailed down the street, effortless and assured. It was a freedom born of mastery, balance and technique. You had let go, but were in control. Technique extends to other devices as well and we are here to discuss architectural computation. Here too, as we will see, mastery is shown by letting go. These papers explore new degrees of freedom in design computation. Each is on a separate aspect of architecture, whether it be aesthetics, process, or structure. Two papers inquire into the entities of design and the processes by which they are manifested. They pose important questions. If we can affect the course of design going forward, are we free to change its past? By defining the characteristics of objects at the outset, are we through automation free to choose from a refined spectrum of outcomes? From the evidence of these papers, the answer to both questions is yes. Through the agency of parametric design we can affect the future and past of architectural processes and their products. Rather than being locked into rigid, linear decisions we are temporally free to choose, tweak and modify. Choice and chance play an important role in aesthetics as well. This has become emblematic of design trends as we have seen in recent years. One of our papers addresses the indeterminacy of particle systems in the design of a monument to the victims of 9/11. By letting go of the handlebars of the computer, the author has been freed to new, poetic forms and processes. Another paper opens urban design to its client community by use of a sophisticated web site. In the tradition of populist innovators like Charles Moore and Lucien Kroll, the authors have extended the design process beyond the office walls to the city itself. The designers, by loosening their grip on the project have made the effort democratic and participatory. Intriguingly, at the end of the paper, they note that this use of cyberspace opens the door to a non-physical architecture. Could architecture, then, let go its materialist biases as well? We hope to engage this and other questions shortly.We are pleased then, to share with you these insights and projects. Wassim and I hope that these presentations will be as liberating for you as they were for us.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	sigradi2003_070
id	sigradi2003_070
authors	Angulo, Antonieta H. and Vásquez de Velasco, Guillermo P.
year	2003
title	El Uso de Scaners y Ploteadores Tridimensionales en Talleres de Diseño Iniciales (The Use of Three-dimensional Scanners and Plotters in Early Design Studios)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper makes reference to the introduction of a new pedagogical strategy in the teaching of fundamental design in early design studios. The authors recognizes a relationship between the creative process and the media that supports the design process, and proposes the use of 3-dimensional scanners and plotters (rapid prototyping) for interfacing between the use of digital and analogue media. The paper suggests that in such learning environment the students will learn to design without the limitations that analogue or digital media will individually impose in the creative process. The paper ends with an outline for a relevant design exercise.
keywords	Conceptual design, 3-d scanners, 3-d plotters
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_075
id	sigradi2003_075
authors	Arroyo, Julio
year	2003
title	Imagen del espacio público e imagen digital (Image of the public space and digital image)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper refers to the concept, image and meaning of the public space in media size cities. The premise is the displacement of the social comprehension and valuation of the public due to economical, political and cultural features of contemporary. The concept of public understood as an adjective of urban space moves to the public as a substantive that refers to a general condition of life in city. Digital image and its informational manipulation are the main resources for processing the public. The research depends on images both from its methodological or epistemological point of view.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_005
id	sigradi2003_005
authors	Barros, D.R., Mandagarán, M., Susta, C. and Nigro, P.
year	2003
title	Hipermedios y no linealidad (Hypermedia and non-linearity)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The following is the preliminary presentation of a study being carried out at the CEAC FAUD UNMdP Center, registered within the research project 15/B101, on hypermedia readings of urban fragments by non-expert users. This work aims at contributing to the definition of an analysis methodology applicable to hypermedia, Web site and CD rom, about design and architecture topics. It is based on the model of analysis by Aarseth, enlarged for hypermedia. Its purpose is to recognize and describe the features, recurrencies, saturations and differences which characterize them.
keywords	Hypermedia, design, analysis methodology
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	acadia03_044
id	acadia03_044
authors	Bermúdez, Julio and Foresti, Stefano
year	2003
title	Information Visualization
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 346
doi	https://doi.org/10.52842/conf.acadia.2003.x.p5s
summary	Digital visualization addresses representational challenges from within and without architecture. ‘Disciplinary’ digital visualization is used to explore, understand and communicate architectural information associated with the production of buildings. 3D modeling, rendering, animation and VR as well as the power of digital media to permit the seamless integration of various data types are unleashing completely new ways to display architecture. As digital power continues to increase and get cheaper, portability and wi-fi networks take root, and visualization work becomes even more main stream, we can expect growing changes in the way the design process is conducted, buildings are presented and documented, and the public and 3rd party’s demands from professional services. This demands a more conscious research/pedagogies aimed at developing new representation conventions.
series	ACADIA
email
last changed	2022/06/07 07:49

For more results click below: