Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade03_217_35_peng
id	ecaade03_217_35_peng
authors	Peng, Chengzhi
year	2003
title	Visualising City in Change with the MEDIUM Platform
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 217-224
doi	https://doi.org/10.52842/conf.ecaade.2003.217
summary	Work on a methodology that attempts to deliver a dynamic urban information system for visualising city in change is presented. We have developed a Multi-tier Extensible platform for Dynamic and Interactive Urban Modelling (MEDIUM) in connection with a large-scale historical urban study programme that investigates the history of the City of Sheffield. The MEDIUM platform shows some new properties that could address the limitations observed in conventional static urban modelling. We consider that 3D virtual city models can be created along a chronological axis and the time dimension of each model segment can be registered in such a way that the 3D models of different times can be brought together under a unifying visualisation platform. This will allow a visual understanding of how a city may have evolved to develop. To date, we have applied the MEDIUM platform to real city datasets and produced examples that allow us to examine what effects of urban visualisation could be achieved through the dynamic user-centred approach.
keywords	Dynamic urban modelling; virtual city; urban study, VRML; Web.
series	eCAADe
email
more	http://sucod.shef.ac.uk
last changed	2022/06/07 07:59

_id	acadia05_254
id	acadia05_254
authors	Sheil, Bob and Leung, Chris
year	2005
title	‘Kielder Probes’ – bespoke tools for an indeterminate design process
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 254-259
doi	https://doi.org/10.52842/conf.acadia.2005.254
summary	Sixteen (makers) are a group of practicing architects, academics, designers and makers who assemble when key questions surrounding design, fabrication, use and adaptability in architecture emerge. Initially, the group was formed out of a motivation to engage as designers with the physical and tactile aspects of production without a dependency upon drawing. Now, in the post digital age, the age of digital fabrication, boundaries between drawing and making, between the designer and the maker, have dissolved. Consequently sixteen(makers) work is now engaged with questions of knowledge transfer, expertise, and innovation where modes of investigation are equally embedded within in the analogue and the digital world. This article relates to our latest ongoing work which is due for completion in 2005/06. The work has been developed as a specific response to the award of an architectural residency by the Art and Architecture Partnership at Kielder Park, Northumbria, England. From the outset, it has not been a requirement of the residency that an outcome is identified early on. In fact, as I write, the outcome remains open. Presented with an extraordinary site and coinciding with a time of rapid change the work has begun by exploring a design process that is adaptable, indeterminate, and informed by site conditions. In October 2003, sixteen(makers) were awarded an architecture residency by The Art and Architecture Programme at Kielder (AAPK) of Northumbria, UK. This organization is well known for commissioning works such as the ‘Belvedere’ by Softroom and the ‘Skyspace’ by James Turrell. Coordinated by Peter Sharp, AAPK consists of a number of large public bodies, including The Forestry Commission, Northumbrian Water and Tyndale District Council. Together they manage a land area of 62,000 ha’s centred on the UK’s largest reservoir and surrounded on all sides by one of Europe’s largest managed forests.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
doi	https://doi.org/10.52842/conf.caadria.2003.323
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2003_121
id	sigradi2003_121
authors	Alvarado, Rodrigo García, Castillo, Gino Alvarez
year	2003
title	Técnicas Cinematográficas para las Animaciones Arquitectónicas (Film-making techniques for Architectural Animations)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper presents film techniques for the expressive development of architectural animations, based on a graphic analysis of productions related to architecture (famous movies, documentaries of buildings and contemporary animations). This study is revealing some cinematographic concepts such as the dynamic composition of image, diversity of camera's positions, control of movements and rhythmic montage of shots that support a meaningful presentation of buildings. Also it suggests the geometric programming of movements and influences in the architectural design.
keywords	Animation, Cinematography, Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	acadia03_002
id	acadia03_002
authors	Anders, Peter
year	2003
title	Four Degrees Of Freedom
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 17
doi	https://doi.org/10.52842/conf.acadia.2003.x.s7a
summary	Letting go is hard to do. Remember back to when, after months of trying, you let go of the handlebars of your bicycle and sailed down the street, effortless and assured. It was a freedom born of mastery, balance and technique. You had let go, but were in control. Technique extends to other devices as well and we are here to discuss architectural computation. Here too, as we will see, mastery is shown by letting go. These papers explore new degrees of freedom in design computation. Each is on a separate aspect of architecture, whether it be aesthetics, process, or structure. Two papers inquire into the entities of design and the processes by which they are manifested. They pose important questions. If we can affect the course of design going forward, are we free to change its past? By defining the characteristics of objects at the outset, are we through automation free to choose from a refined spectrum of outcomes? From the evidence of these papers, the answer to both questions is yes. Through the agency of parametric design we can affect the future and past of architectural processes and their products. Rather than being locked into rigid, linear decisions we are temporally free to choose, tweak and modify. Choice and chance play an important role in aesthetics as well. This has become emblematic of design trends as we have seen in recent years. One of our papers addresses the indeterminacy of particle systems in the design of a monument to the victims of 9/11. By letting go of the handlebars of the computer, the author has been freed to new, poetic forms and processes. Another paper opens urban design to its client community by use of a sophisticated web site. In the tradition of populist innovators like Charles Moore and Lucien Kroll, the authors have extended the design process beyond the office walls to the city itself. The designers, by loosening their grip on the project have made the effort democratic and participatory. Intriguingly, at the end of the paper, they note that this use of cyberspace opens the door to a non-physical architecture. Could architecture, then, let go its materialist biases as well? We hope to engage this and other questions shortly.We are pleased then, to share with you these insights and projects. Wassim and I hope that these presentations will be as liberating for you as they were for us.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	acadia03_015
id	acadia03_015
authors	Bernhardt, Matthew and Blostein, Beth
year	2003
title	APPROPRIATE LEVELS OF ACCESS: AN EMPIRICAL STUDY ON THE AVAILABILITY OF COMPUTERS IN STUDIO
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 119-127
doi	https://doi.org/10.52842/conf.acadia.2003.119
summary	One of the most significant technological challenges facing architecture schools today is how to provide an appropriate level of access to computing resources. As the computer has become a significant tool in the study and practice of architecture, students need to have access to that tool in order to further their studies. But in facing this question of access, what is “appropriate”? Is there such a thing as too much access? Is 1:1 access—a computer for every student—the minimum level of access that schools and students should accept? Or is there a point beyond which more resources just means more waste; computers sitting idle and unused, or students using the computer for unproductive ends? These questions were the subject of an experimental series of studios in the spring of 2002, wherein three studios were given varying numbers of computers for a term. The use of these computers was then tracked, and compared with previous terms. In tandem, the quality of work produced by these three studios was compared. While additional experiments are most likely needed to draw firm conclusions, the results of this experiment seem to support defining “an appropriate level of access” at less than 1:1.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
doi	https://doi.org/10.52842/conf.acadia.2007.174
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2003_088
id	sigradi2003_088
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2003
title	Needs Requirements Performances Vs Goals Constraints Values in Collaborative Architectural Design
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The following is a report on an on-going research study aimed at defining a support system for Collaborative Design in architecture. This paper concisely shows the latest results. In the present report the emphasis is laid on the relations among the operators and their different goals. We studied the preliminary phase of the architectural design, for which we defined a model and implemented a software system. The validity of the software system does not decrease when it is extended to the remaining design phases. The goal of the research is to improve collaboration among operators.
keywords	Collaborative Architectural Design, Knowledge Engineering, Design Goals, Constraints, Conflicts Reduction
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2003_m_016
id	cf2003_m_016
authors	CHEN, Hong-Sheng and LIN, Feng-Tyan
year	2003
title	A Simulation Study on Public Building's Staircase Fault Tolerance
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 393-402
summary	This paper applies the concept of fault tolerance to staircase layout plan. Fire or smoke may cause some staircases in a building inaccessible. We argue that architects should assess the result from the possible fault of vertical routes. The capability of tolerating staircase faults depends on space usage, arrangement, and pedestrian attributes. In this study, a mathematical model is constructed. For analysing pedestrian's movement in interior space, we employ Monte Carol simulation and Agent-Based Modelling method in a CAAD environment. It helps us to visualise the dynamic process of agent's evacuation process, and to test the problem of possible staircase faults. Finally, a case study brings some important discoveries.
keywords	agents, fault tolerance, simulation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	caadria2003_b4-3
id	caadria2003_b4-3
authors	Chen, Hong-Sheng and Lin, Feng-Tyan
year	2003
title	Computer Aided Performance Analysis of Staircase Fault Tolerance
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 567-578
doi	https://doi.org/10.52842/conf.caadria.2003.567
summary	This study is to investigate the performance of staircases in a building with some faulty staircases. In this building, any unexpected hazard or repairs may cause vertical escaping routes inaccessible. Therefore, it is crucial that architects should assess this condition, and the users also need to be aware of this problem. Facing those staircase faults, architects need to consider space usage, staircases arrangement, and pedestrian attributes. This paper proposes a method to model the pedestrian's movement in the interior space of abovementioned building. We applied Monte Carlo simulation and AgentBased Modeling method in a CAAD environment. And we will apply two case studies to bring forward some important discoveries and support our arguments.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade03_595_49_delic
id	ecaade03_595_49_delic
authors	Delic, Davor and Turk, Ziga
year	2003
title	HYCE – Hyperlearning in Civil Engineering Curricula A Pilot Course in Implementation of Information Technology Course - a Case Study at the Faculty of Civil Engineering, University of Zagreb
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 595-600
doi	https://doi.org/10.52842/conf.ecaade.2003.595
summary	Outline of development of a revised base ITC course at the Faculty is shown here. The course, called Introduction To Information Technology Implementation is aimed for 2nd year students (3rd semester) of the study. For the first time it was held in the winter semester of 2002/03 as a pilot course replacing the old way of course delivery. This implementation was carried out through a “pathfinder” project WORMES from February 2002 till March 2003 and would be used as a template for future Hyperlearning implementation on other courses through other Faculty education programes. The objective was to establish continuous students teamwork around a problem – a project completely accomplished in IT surround. A slightly adapted methodology known as Hyperlearning – a version of Problem Based Learning, was chosen as a based learning methodology for a new way of course delivery. The gained results were really impressive. Not only efficiency of delivery was increased in many ways (less hours spent on exercises, better knowledge detaining...) but also huge enthusiasm among students was constantly maintained and their creativity was emphasized surprisingly. A lot of data were collected, analyzed and some of the results are published here.
keywords	Hyperlearning, Problem based learning, IT course development
series	eCAADe
email
more	http://www.grad.hr
last changed	2022/06/07 07:55

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ecaade03_665_181_duarte
id	ecaade03_665_181_duarte
authors	Duarte, José P.
year	2003
title	A Discursive Grammar for Customizing Mass Housing - The case of Siza´s houses at Malagueira
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 665-674
doi	https://doi.org/10.52842/conf.ecaade.2003.665
summary	The ultimate goal of the described research is a process for mass customizing housing based on computer-aided design and production systems. The current goal is the development of an interactive system for generating solutions on the Web based on a modeling approach called discursive grammar. A discursive grammar consists of a programming grammar and a designing grammar. The programming grammar generates design briefs based on user data; the designing grammar provides the rules for generating designs in a particular style, and a set of heuristics guides the generation of designs towards a solution that matches the design brief. This paper describes the designing grammar using Siza´s houses at Malagueira as a case study.
keywords	Mass customization: housing; grammars; Siza; design automation
series	eCAADe
email
more	http://www.civil.ist.utl.pt/~jduarte/malag/
last changed	2022/06/07 07:55

_id	sigradi2004_169
id	sigradi2004_169
authors	Edison Pratini
year	2004
title	An experience on supporting the learning of technical graphics and improving visualization
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper presents an experience of applying computer graphics, virtual reality and Internet resources in the teaching of technical graphics in engineering and design courses at the University of Brasilia, Brazil. Our motivation was the fact that most of the students have a lack of previous knowledge on the basis of drawings, resulting difficulties in both understanding and visualizing technical drawings. As an experimental method, we introduced VRML 3D modeling in addition to CAD and regular pencil-and-paper drawings study and practice. To better support learning, we first provided a website with animations and virtual reality resources, avoiding the usual textbook metaphor. Since 2003 we are providing a CD-ROM containing all the former website material which is updated each semester. This experience is intended to improve the learning in a way that motivates the students. Classes, website and CD-ROM material was conceived to take advantage of computers´ interactivity and animated resources.
keywords	Distance learning, interactivity, Internet, technical graphics, 3D modeling
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ea0f
authors	El Araby, Mostafa and Okiel, Ahmed
year	2003
title	The Use of Virtual Reality in Urban Design: Enhancing the Image of Al-Ain City, UAE
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	This study aims at exploring the rapid growth of the use of Virtual Reality techniques in the field of Urban Design with application to the Al-Ain City. Currently, Virtual Reality and Virtual Environments are the most growing fields of information technology and have a great media attention. There is evidence to suggest that the use of such technology will enhance conceivable image of any proposed project at any urban setting for users, designers and clients. Therefore, city officials and administrators (clients) and the public (users) can reach better decisions regarding proposed projects within their towns and cities. Because of the limited time and resources, this study examines the visual quality of Downtown Al Ain, UAE, specifically, the Khalifa street (major shopping street). A basic VRmodel to the street was constructed. Modifications to the basic model were made to examine how changes in buildings’ heights and street vegetation affect the visual quality of the street. Results of this study showed that urban visualization is proving to be a valuable tool for designers and planners. Increasing the heights of buildings in the mid-street and on the edges, along with enforcing distinctive architectural styles for the proposed buildings will enhance the overall quality of the street. Furthermore, decreasing the intensity of current vegetation and tree heights will increase the imaginable quality of the street. Nevertheless, the built of a comprehend VR model needs more time, resources and facilities that were not available to this study. This model, if completed, tothe whole downtown area can be used both to identify existing problems and to quickly evaluate alternative solutions to those problems.
series	other
email
last changed	2003/03/11 20:39

_id	caadria2003_a6-2
id	caadria2003_a6-2
authors	Embi, M. Hamid, M. and Rafi, A.
year	2003
title	Learning Basic Principles of Fire Regulations An Experimental Teaching and Learning Tool
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 771-786
doi	https://doi.org/10.52842/conf.caadria.2003.771
summary	The study on integrating fire regulations into the design process is described through several study and analysis. However not all of them address the real issue of which fire regulation are difficult to be considered at the early stage of the design process. There are few factors on which fire regulation was not being considered at the early stage of the design. Two strong factors are the complexity of the regulations and the lack of knowledge among architects about fire regulations. Therefore fire requirements are always considered towards the end of the design process. This paper intends to address about the issue of difficulties in fire regulations and how we think these can be solve. We also design a system that can be used either by students or architects to understand the principles of the regulations and its applications in the design process. Finally a prototype system is demonstrated on how we envisage the system that can be used to help architects integrate fire regulations at the early stage of design process.
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: