Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 267

Reformat results as: short short into frame detailed detailed into frame

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	c5d7
authors	Kuffer, Monika
year	2003
title	Monitoring the Dynamics of Informal Settlements in Dar Es Salaam by Remote Sensing: Exploring the Use of Spot, Ers and Small Format Aerial Photography
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Dar es Salaam is exemplary for cities in the developing world facing an enormous population growth. In the last decades, unplanned settlements have tremendously expanded, causing that around 70 percent of the urban dwellers are living now-a-days in these areas. Tools for monitoring such tremendous growth are relatively weak in developing countries, thus an effective satellite based monitoring system can provide a useful instrument for monitoring the dynamics of urban development. An investigation to asses the ability of extracting reliable information on the expansion and consolidation levels (density) of urban development of the city of Dar es Salaam from SPOT-HRV and ERS-SAR images is described. The use of SPOT and ERS should provide data that is complementary to data derived from the most recent aerial photography and from digital topographic maps. In a series of experiments various classification and fusion techniques are applied to the SPOT-HRV and ERS-SAR data to extract information on building density that is comparable to that obtained from the 1992 data. Ultimately, building density is estimated by linear and non-linear regression models on the basis of an one ha kernel and further aggregation is made to the level of informal settlements for a final analysis. In order to assess the reliability, use is made of several sample areas that are relatively stable over the study period, as well as, of data derived from small format aerial photography. The experiments show a high correlation between the density data derived from the satellite images and the test areas.
series	other
email
last changed	2003/03/11 20:39

_id	3cc0
authors	Zimmermann, Christopher
year	2003
title	Travelpost: Media Access via Geographic and Temporal Information
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The versatility with which digital media such as images, sounds, and video clips can be presented, combined with the ease of sharing and accessing digital media through the internet, creates opportunities for displaying media in new and useful ways. Associating meta-data (additional information about the media) with digital media extends these opportunities by enabling the media to organize itself. For example, a collection of media items that “knows” where and when they were recorded can position themselves on a map and a timeline. With these visual tools a person can better understand the location and time of a specific media item, as well as its spatial and temporal relationship to the other items. This paper presents an internet application that implements these ideas. Travelpost (http://www.dandelion.org/travelpost), is a system for browsing media recorded during a persons travels. A map, a timeline, and a regular web browser window offer three interrelated browsers to the user. This allows the user to investigate the entire data-set, in this case a travelers journey, from a geographic, temporal, or media specific view.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_117_101_bund
id	ecaade03_117_101_bund
authors	Bund, Sébastien and Do, Ellen Yi-Luen
year	2003
title	SPOT! Fetch Light - Interactive navigable 3D visualization of direct sunlight
doi	https://doi.org/10.52842/conf.ecaade.2003.117
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 117-124
summary	SPOT is a 3D environment for direct sunlight visualization. Implemented in Java 3D, SPOT features two distinct and complementary components: Time Projection and Navigable Animation for virtual interaction. SPOT supports multi-dimensional data visualization including sun angle variations with diurnal and annual cycles in threedimensional space. In SPOT users can sketch on any surface in the 3D environment to indicate the area for simulation. SPOT then generates a spatial distribution representation of the illuminance level on a selected surface over time, rendered with colors of varied gradients. SPOT also enables designers to visualize the temporal information of light distribution over time for a given point. For each point clicked on the 3D model, SPOT generates a calendar diagram where the X and Y axis represent the months of the year and the time of the day. The color of each cell of the calendar is the result of the calculation of the light amount reaching the selected point.
keywords	Daylighting, virtual worlds, virtual environments, sketching in 3D, gestureinterface, multi-dimension information visualization
series	eCAADe
email
more	http://depts.washington.edu/archbook
last changed	2022/06/07 07:54

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cf2003_m_062
id	cf2003_m_062
authors	JUNG, T., GROSS, M. D. and DO, E. Y.-L.
year	2003
title	Light Pen - Sketching Light in 3D
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 327-338
summary	We describe a lighting design system driven by sketching on 3D virtual models. Conventional lighting design tools simulate the lighting effects of design decisions such as window locations, surface treatments, and fixture placement. Light Pen takes the inverse approach by allowing the designer to indicate desired illumination on a 3D model. This serves as input to a knowledge-based lighting design system, which recommends what lights to use and where to place them, based on the designer's expressed intentions and on the geometry of the space.
keywords	knowledge-based, lighting, sketch, virtual environment
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade03_369_112_akgun
id	ecaade03_369_112_akgun
authors	Akgun, Yenal
year	2003
title	An Interactive Database (HizmO) for Reconstructing Lost Modernist Izmir:
doi	https://doi.org/10.52842/conf.ecaade.2003.369
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 369-372
summary	The research project in progress in the School of Architecture at the Izmir Institute of Technology includes documentation and reconstruction (by 3D modeling in electronic media) of damaged and lost early modern buildings in the Izmir region. The research aims to analyze the differences between Izmir modern buildings and Universal Modern Style, and preserve information on architectural heritage for future generations. The project is at the phase of developing an interactive web-based historical database (HizmO) that includes data (information, images, technical drawings, VRML models) and visualization of the findings. This database aims to be a pioneer in Mediterranean Region for exhibition of relations between traditional architecture (especially Mediterranean locality) and modernism, and organization of a network and off-campus learning activity for Mediterranean architecture that serve as a guide for students, researchers and architects. This paper aims at introducing this research and discussing the application of the database “HizmO,” its aims and potential effects on education in architectural history.
keywords	E-learning, educational database, architectural history, VRML
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2003_096
id	sigradi2003_096
authors	Alvarez, Valeria and Albero, Constanza
year	2003
title	Una rama en la arquitectura de la era digital (A branch in architecture of the digital age)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Genetic information determines the germ of life, the first idea, that encloses all the power of creation. In every "germ" lays the identity, the strength to seek and fulfill expression in form. History, technical and scientific progress require new answers and provide new tools while encouraging investigation. A "Branch", a simple nature element, is reinterpreted into bits of information, reconstructed after being apprehended. This process reveals new elements that could have never been conceived with traditional methods. Nature and Technology complement each other in an embriological growing system that provides a new concept in the construction of real spaces.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	f8f7
id	f8f7
authors	Bhzad Sidawi
year	2003
title	The pattern of Internet use for information management by architectural practices in the UK
source	Cardiff University, Welsh School of Architecture Cardiff, UK
summary	In recent history, architects have experienced problems related to the use and management of new innovations. The Internet presents one such challenge. It offers considerable expansion in types of communication and sources of business information and connects people and businesses around the globe. As is argued in this research, these services could play a positive role in architectural practice. This research examines the use of the Internet by architectural practices in UK in order to reveal how aware they are of the opportunities it presents, the extent to which they are taking advantage of them, and the problems they are experiencing. A field study was conducted of two types of practices: RIBA private practices and local authority practices. A number of research tools were used to inspect how these practices are using the Internet to manage various types of information that used and produced in the practice, namely: the acquisition of web information, the exchange of the practice’s information through the web and the presentation of the practice’s information on the web. Explanations for the results were sought by correlating variables from the questionnaire study, using simple statistical tests. The field study shows that many Internet services are unpopular among architects, and that practices have problems in adopting and using the technology. The pace at which the Internet is being absorbed and accepted by practices is slow. The study suggests that possible causes are: the little knowledge of users’ about IT, the poor resources of the practice, and old or imperfect Internet installations and the absence of the Internet support to the architect’s activities. The research argues that there are a number of links between these negative factors which make the practice unable to utilize the Internet and to manage the practice’s information through the Internet. To break these links, the research suggests that practices should adopt a specific management strategy to promote more utilization of Internet services in the office and to manage information. Practices need to make certain changes to the way they manage the Internet and work with it, if they plan to integrate the Internet more successfully into their practice. The research discusses techniques for improving practice management which would help practices to digest Internet technology and to use it more effectively in the practice.
keywords	Internet, Architectural practices, Information management, Communications
series	thesis:PhD
type	normal paper
email
last changed	2006/11/03 23:29

_id	caadria2003_a6-4
id	caadria2003_a6-4
authors	Bialas, Z.,Glinkowska, A., Kepczynska-Walczak, A. and Szrajber, R.
year	2003
title	Architectural Heritage As A Force In Networked Caad Education
doi	https://doi.org/10.52842/conf.caadria.2003.801
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 801-808
summary	This paper aims to present a project being currently in progress. The task is to describe a concept for future access to information resources which cover the Polish (in wider international context) architectural and urban design, architectural heritage, applied arts in form of drawings, images, 3D models and VR along text explanations. In this way the database would enable access to huge resources and didactic packages. The proposed database would be primarily addressed to students of architecture, who in addition would be involved in creation of the collection, e.g. through building 3D models.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2003_000
id	sigradi2003_000
authors	Carmena, Sonia and Utgés, Raúl (eds.)
year	2003
title	SiGradi2003
source	Proceedings of the 7th Iberoamerican Congress of Digital Graphics Graphics / ISBN 987-9459-51-2] Rosario (Argentina) 5-7 november 2003, 411 p.
summary	The conference topic "Digital Culture & Difference" encourages creative and critical inquiries about the idea of measuring differences within and between culture manifestations of digital age towards new information for knowledge completion. Submitted work may address this topic or other significant aspect of Digital Media. Type of Work Categories: 1- Completed work; 2- Work in-progress; 3- Graphic or visual works (posters). Areas of Inquiry: Design; Architecture, Cinematography; Arts; etc. Focus: Professional applications; Academic experiences; Scientific research; Theory, epistemology, philosophy; Project, design, communication; Environment, preservation, sustainability; Technology, tools, media; etc.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2003_c1-3
id	caadria2003_c1-3
authors	Cheng, N. Y. and Lane-Cummings, S.
year	2003
title	Using Mobile Digital Tools for Learning about Places
doi	https://doi.org/10.52842/conf.caadria.2003.145
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 145-156
summary	To explore how mobile digital tools can bring students out from isolated classrooms, we tested several for use in design studio site visits. We focused on small, off-the-shelf tools that are inexpensive and easy to upgrade. In this paper we identify the logistical, efficiency, and learning considerations for the selection and introduction of mobile digital tools , with observations about device usability and administration that are applicable to other kinds of technology introduction. We found that adoption of a tool depends on several factors, including ease of use and inconspicuous nature. Compared to traditional tools, most of these tools require a great deal of set-up time before students can use them efficiently. In addition, they require docking with a computer to analyze the information collected in the field. As a result, most of the learning takes place in the studio, rather than in the field. Our eventual goal is to clarify the potentials of place-recording tools, making it easier to gather and use a toolkit for specific situations.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ecaade03_583_31_chiu
id	ecaade03_583_31_chiu
authors	Chiu, M.L., Liao, C.J., Wu, R.L. , Peng, J.C. and Huang, C.C.
year	2003
title	Educating Digital Designers: A Process-Oriented Approach
doi	https://doi.org/10.52842/conf.ecaade.2003.583
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 583-586
summary	The new digital technologies clearly influence what we do in practice and teach in design studios. The study adopts a process-oriented approach to initiate digital design in the graduate design studio. It is found that the skills to develop the design process for integrating digital tools and information are critical for designers. The educational pedagogy, operation studies and discussion are presented.
keywords	Digital design, design education, design process, information management
series	eCAADe
email
more	http://www.arch.ncku.edu.tw/
last changed	2022/06/07 07:56

_id	cf2003_m_015
id	cf2003_m_015
authors	CHIU, Yi-Chang and CHIU, Mao-Lin
year	2003
title	Right Tools for Designing Free-form Geometry More than Representation and Manipulation
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 433-444
summary	This paper examines what the appropriate strategy for designers to handle the complex object is and how digital and conventional tools are involved in presenting and representing design artefacts for presenting design ideas and deliver design information, particularly in 3D free-form geometry. A series of precedent studies are conducted to examine the argument. The manipulation of digital tools is not merely a technical problem but a strategy about what the right tool for designing geometry is and how design process and principles are innovated. Two demonstrative projects are presented to illustrate how designers can better analyse and define the best choice of medium and design tools, and create a digital design platform to reach the merit of the tools created.
keywords	design thinking, digital tools, free-form, prototype
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	cf2003_m_033
id	cf2003_m_033
authors	DAVE, Bharat
year	2003
title	Hybrid Spaces of Practice
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 181-190
summary	Research projects in computational design typically view digital tools as existing independently of their physical settings. However, what we witness are hybrid spaces of practice, one in which there is an increasing fusion and overlap of physical and digital objects and environments. Instead of focusing on digital tools and information in isolation, this paper argues for the need to conceptualise and experiment with hybrid work environments through combinations of place, time, scale, resolution and other dimensions to develop hybrid spaces of practice. The paper describes experiments with a work environment that consists of multiple displays and representations to motivate and characterise hybrid spaces of physical and digital work environments.
keywords	collaboration, ephemeral, tangible, virtual environment
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	ecaade03_000
id	ecaade03_000
authors	Dokonal, Wolfgang and Hirschberg, Urs (Eds.)
year	2003
title	Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2003
source	21th eCAADe Conference Proceedings [ISBN 0-9541183-1-6], Graz (Austria) 17-20 September 2003, 677 p.
summary	Digital Design is not only the title of the 21st eCAADe conference 2003 in Graz but also one of the main keywords in Architectural Education nowadays. Information Technology has managed to influence all fields of the “architectural process” and has developed straight from the calculation tools of the engineers over the CAD drafting boards of big architectural firms to every architectural professional and student. This process was incredibly quick in terms of the architectural chronology but very slow in terms of architectural education at universities (at least in Austria). Not very long ago it was sometimes forbidden to deliver CAD drawings for design projects at our faculty. In fact, the early experiments in using the computer in the design process quite often failed because of the restrictions of the available (and affordable) hard-and software. Today, even our first year students start some of their earliest design experiences quite naturally with the computer. However, there are still many questions to be answered and maybe some new questions to be asked in the relationship between architectural design and the computer. Architectural design is mainly a “game of imagination” and today computer tools start to enhance and support the architects visions after a longer period where they were often reduced by the limitations of the tools. Still, there are many different ways to design because every designer has a different approach towards architectural design and there is no such thing as “the perfect digital design tool” for everyone. We hope that this conference with all the different approaches documented in this book plays a major role in the discussion and development of all these aspects and brings us “one step further”.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

For more results click below: