Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	acadia03_049
id	acadia03_049
authors	Lim, Chor-Kheng
year	2003
title	An Insight into the Freedom of Using a Pen: Pen-based System and Pen-and-paper
doi	https://doi.org/10.52842/conf.acadia.2003.385
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 385-393
summary	In earlier researches on freehand sketching, the cognitive behavior of designers was studied. In recent years, some researchers began to look into this area from the design media aspect. The pen-based system, developed by Gross, Landay and other researchers, used the pen as an input device, allowing sketches to be freely drawn in a computer environment. The importance of the freehand sketch lies in its ability to freely represent various drawing projections using ambiguous sketches. However, as for the various drawing projections, such as diagrams, symbols, plans, elevations, sections, perspectives, etc., how are they interrelated to a designer’s thinking process and the cognitive behavior? Different media have different abilities to represent different projections. Would they affect the designer’s design thinking as well? Targeting different media, i.e., conventional freehand sketches vs. the computer pen-based system, this research uses case studies and think-aloud protocol analysis to present an analysis and discussion. Research results show that there is a relationship of gradual embodiment that is mutually complementary, going from a whole perspective to being the dissected into sections between the different projections. In addition, these projections restrict the designer’s various design thinking processes, while the use of different media may somewhat change the actual design thinking of the designer
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ecaade03_615_54_kheng
id	ecaade03_615_54_kheng
authors	Lim, Chor-Kheng
year	2003
title	Is a pen-based system just another pen or more than a pen?
doi	https://doi.org/10.52842/conf.ecaade.2003.615
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 615-622
summary	Freehand sketch is the most critical stage in the design process. The importance of the freehand sketch is in its ability to freely represent various projections of ambiguous drawing using a convenience tool, pen-and-paper. Recently, pen-based system which developed attempted to use pen as an input device, allowing sketches to be freely drawn on computers. However, as far as the various drawing projections, such as diagram, symbol, plan, elevation, section, perspective, etc., how are they interrelated to a designer’s cognitive behavior? Different media have different abilities to represent projections. What’s the difference of design cognitive behavior between conventional pen-and paper and pen-based system in view of both using a pen as a design medium? This research proceeds a think-aloud protocol analysis to present an analysis and discussion. Research results show that there is a relationship of gradual embodiment, mutually complementary, going from a whole to being dissected into sections between the different projections. Moreover, pen-based system is more than a pen, it allows designer to inspect a 3-D view during the sketching stage. This gives the designer more opportunities during the sketching stage to conduct the design thinking process based on the ambiguous 2-D projections and the more concrete 3-D images, as well as more opportunities for visual feedback
series	eCAADe
email
last changed	2022/06/07 07:59

_id	a2de
id	a2de
authors	Gao, Song; Kvan, Thomas
year	2003
title	AN ANALYSIS OF PROBLEM FRAMING ACTIVITIES IN DIGITAL VERSUS PAPER MEDIA
source	Architectural Education, Southeast University, Nanjing, China, December 2003, pp. 183-189
summary	Architectural design is described in part as the solving of ill-defined or wicked problems. In these activities, designers are not only simply given well-stated problems but also need to find and formulate problems. This process is called as ‘problem framing’. Paper media have been for many years the design tools used by designers to help them engage, and hence frame, problems. Computer technologies have gained prominence in design processes but have typically been used in discrete problem solving processes or in presentation. It has been stated that problem exploration is more difficult using a computer tool. This attitude has influenced the teaching and use of computers in architectural education. The purpose of this study is to understand how digital and paper media are used respectively in ‘problem framing’ activities in support of students’ design learning. This paper reports a pilot laboratory study to test the validity of a proposed coding scheme comparing design activities using digital and paper media and report initial results of the research. Through this research we wish to gain insight of ways in which students engage in ‘problem framing’ activities using different media and suggest ways in which digital media might better support problem framing activities.
keywords	Problem framing; digital design; protocol analysis; studio teaching
series	other
type	normal paper
email
last changed	2004/09/24 14:34

_id	cf2003_m_024
id	cf2003_m_024
authors	SEGERS, Nicole S. and de VRIES, Bauke
year	2003
title	The Idea Space System - Words as Handles to a Comprehensive Data Structure
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 31-40
summary	The Idea Space System is a CAAD system that supports an architect in the early phase of the design process, by reducing fixation in the process and enhancing the ‘flow’ of work. Mostly in the field of CAAD research, the emphasis lies on sketching or modelling. However the architect uses multiple representations in developing the design. In this research the focus lies on the use of words. The Idea Space System captures all design data and then uses the words to provide the architect with new associations and relations between words (real time), which stimulate the generation of new ideas. Architecture students have used our first prototype of the Idea Space System in a small experiment. This gave us better insight in the ideas and relations made by the architect in the early phase of the design process and what kind of feedback preferred. Afterwards a study was done about the representation of the feedback. In this paper we focus on the textual input provided by the architecture students and the description of the Idea Space System, handling this textual input and providing the architecture students with the proper feedback.
keywords	conceptual, information modelling, design thinking, text
series	CAAD Futures
email
last changed	2003/11/22 07:23

_id	cf2003_m_003
id	cf2003_m_003
authors	ZREIK, K., STOUFFS, R., TUNÇER, B., OZSARIYILDIZ, S. and BEHESHTI, Reza
year	2003
title	Information Modelling for Improving Communication in Design and Construction
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 63-72
summary	Globalisation and international competition force the AEC industry to change its work and collaboration practices. The traditional way of working is evolving into a more integrated process, and the traditional use of “synchronised passive” files and paperbased communication is being replaced with ICT based solutions. Currently, the AEC community is at an intermediate stage, i.e., it is shifting to “online” electronic documents. In this paper, a new concept called “eDocument” (eDoc) is introduced. The eDoc project is a cooperative effort in order to develop and implement a generic dynamically structured, multimedia, multi-channel, and multimodal information system as a means for communication in AEC projects. The major innovation in the concept is that, although it uses a repository, the focus is on the “logical and physical” specifications of the eDoc concept as a shared tele-workspace that is accessible through multiple platforms
keywords	collaboration, digital design media, information modelling, visualisation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	sigradi2003_020
id	sigradi2003_020
authors	Abarca, R., Díaz, S. and Moreno, S.
year	2003
title	Desarrollo de material informatico-educativo para la enseñanza de la geometría a estudiantes de diseño (Development of IT-based educational material for the teaching of geometry to students of design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper is born as an answer to the meaningful learning difficulties and academic performance in Spatial and Flat Geometry course on second year Design School at Universidad de las Americas University, Santiago de Chile. The problem is faced from the potentiality that digital environment gives us in representation, display options, shape and projection testing, analysis and non visual accounts to teach flat and spatial geometry within the receptors' codes and coherent with designer's own language.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade03_369_112_akgun
id	ecaade03_369_112_akgun
authors	Akgun, Yenal
year	2003
title	An Interactive Database (HizmO) for Reconstructing Lost Modernist Izmir:
doi	https://doi.org/10.52842/conf.ecaade.2003.369
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 369-372
summary	The research project in progress in the School of Architecture at the Izmir Institute of Technology includes documentation and reconstruction (by 3D modeling in electronic media) of damaged and lost early modern buildings in the Izmir region. The research aims to analyze the differences between Izmir modern buildings and Universal Modern Style, and preserve information on architectural heritage for future generations. The project is at the phase of developing an interactive web-based historical database (HizmO) that includes data (information, images, technical drawings, VRML models) and visualization of the findings. This database aims to be a pioneer in Mediterranean Region for exhibition of relations between traditional architecture (especially Mediterranean locality) and modernism, and organization of a network and off-campus learning activity for Mediterranean architecture that serve as a guide for students, researchers and architects. This paper aims at introducing this research and discussing the application of the database “HizmO,” its aims and potential effects on education in architectural history.
keywords	E-learning, educational database, architectural history, VRML
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2003_119
id	sigradi2003_119
authors	Bermudez, J., Foresti, S., Agutter, J., Westenskow, D., Syroid, N. Drews, F. Tashjian, E. and Adams, V.
year	2003
title	Metodología Interdisciplinaria para Diseñar Nuevas Arquitecturas de Representación de Datos (Interdisciplinaria Methodologies for the Design of a New Architectures of Data Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Data representation architecture can be defined as the organizational, functional, experiential, formal, and media-technological order defining the interaction between data, representation, and user. This paper presents an interdisciplinary methodology to develop such architectures in order to significantly improve real time decision making in complex data environments. We have reported in some aspects of this work elsewhere. In this occasion, we will describe our working methodology based on complete interdisciplinarity, the design process and evaluation protocols. We will show work done for Finance and Network Monitoring. Our long-term goal is to design a new generation of data representation architectures that is applicable to diverse fields.
keywords	Data representation; visualization; design, architecture, interdisciplinary
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2003_a5-3
id	caadria2003_a5-3
authors	Chang, Teng-Wen and Lai, Ih-Cheng
year	2003
title	Navigation In 3D Information Landscape-A 3D Museum for Civic Buildings
doi	https://doi.org/10.52842/conf.caadria.2003.641
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 641-650
summary	Navigation is about information that requires visual feedback and spatial orientation in both information representation and userinteraction. Among those, spatial orientation is the primary research question for navigating in 3D information landscape. By inspired by Ware's three control loops, 'spatial metaphors' and 'visual components" are proposed as the fundamental concepts of a navigation framework called 'i-Room'. i-Room is comprised of four constituents-handles, i-Bag, i-Map and Focus/scale. An information landscape based on a repository of diverse digital media of 11 significant civic buildings in Taiwan is designed for testing this navigation framework. An implementation of i-Room based on Muse of navigation realization and their interaction behaviors with spatial metaphors/visual components is also reported in this paper.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade03_659_166_hungming
id	ecaade03_659_166_hungming
authors	Cheng, Hung-Ming
year	2003
title	A digital modeling with reasoning system in early phase of design
doi	https://doi.org/10.52842/conf.ecaade.2003.659
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 659-664
summary	This study describes statue in the early phase of design, the approach taken by its conceptual development and manipulation. And on the developing digital tools provide a computational support for the process of indexing and retrieving. The digital modeling also addresses specifically architectural programming, adjacent relationship between the building element and articulation in designing. The overall in building mass development starting with reasoning of the conceptual model in early phase try to find evocative cases to help designer thinking. And finally discuss some issues and challenges of artificial intelligent. The research for representing designer’s creativity and searching solution provide another way to generate an articulating conceptual model. The integration approach of research starts with the pure case-based and rule-based reasoning system to help designer generate more understandable and creative product in the architectural design application.
keywords	Case-based reasoning, conceptual model, computer aided design, buildingmass development, design process
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2018_1383
id	sigradi2018_1383
authors	Correia Fernandes, Gabriela; Bertola Duarte, Rovenir; Ferreira de Oliveira, Beatriz; Medri Striquer Souza, Giovana
year	2018
title	Towards a democratic approach on public lighting: remote systems based on Metadesign
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 60-67
summary	This research explores Metadesign(Giaccardi, 2003)as an innovative framework on the design of urban lighting systems. We hypothesize that a system based on this mode of design can bring breakthroughs that could cope with ill-defined problems in urban lighting design. Therefore, the aim is to propose alighting system in support of participation through interaction at use time. In this sense, by comprehending lighting infrastructures as sociotechnical environments, we believe Metadesign could cope with emergent needs arising in the context of personally meaningful activities andcould empower users to engage actively in their systems development and evolution.
keywords	Metadesign; Participation at use time; Sociotechnical systems; Urban lighting design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2004.024
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	cf2003_m_046
id	cf2003_m_046
authors	HWANG, Jie-Eun and CHOI, Jin-Won
year	2003
title	SpaceScope: Spatial Content-Based Retrieval of Architectural Floor Plans
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 53-62
summary	This research investigates spatial information retrieval in architecture, based on an efficient metadata that is crucial for content-based retrieval. SpaceCore is the metadata schema for spatial information on a floor plan implemented with RDF (Resource Description Framework). To generate metadata, we analyse the factors of spatial information, and then construct a data model containing the content and structure of spatial information. To exploit the metadata, we suggest various query operations with possible predicates and interfaces. SpaceScope, the spatial information retrieval system, consists of three modules: an input data module, a query module, and a browse module. As to implementation, we have already developed the real time plan-structuring system, called “Vitruvius”, as an inputting and modelling data module (using C++). Based on the database, the system performs the similarity analysis and then evaluates the alternative plans with the retrieval goals. At the end of the paper we discuss the potential of SpaceScope in the schematic design stage of the architectural design process, possibly improving and triggering the designer’s conceptual approach against a logical background and facilitate rapid decision-making after full consideration.
keywords	case-based reasoning, content-based retrieval, metadata, RDF, semantic
series	CAAD Futures
last changed	2003/09/22 12:21

_id	acadia03_023
id	acadia03_023
authors	Ibrahim, Magdy and Krawczyk, Robert
year	2003
title	The Level of Knowledge of CAD Objects within the Building Information Model
doi	https://doi.org/10.52842/conf.acadia.2003.173
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 173-177
summary	The first generation of CAD software depended on entity objects that were manipulated and interpreted by the user as meaningful graphics symbols. These entities only represented the geometrical properties of the architectural elements. With the present emerging generation of CAD systems, a new concept shifts a drawing-based model into a Building Information Model with the potential of modeling true architectural objects. Theoretically, these CAD objects will provide all related data to the designer describing the geometry, as well as any related data associated with how the object is actually used. The knowledge required to support an object should have structure to it. Different levels of knowledge need to be included, such as the geometrical information, which should be flexible enough to accommodate any type of shape and modification while keeping the object’s integrity as a unit and maintaining its relations to other objects. The CAD object concept, as remarkable as it is, might also have potential problems. It has some implications over the design process, as well as the architectural profession itself.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	cf2003_m_022
id	cf2003_m_022
authors	JABI, Wassim
year	2003
title	Reflections on Computer-Supported Cooperative Design Systems
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 169-180
summary	Computer-supported cooperative work has come to signify a process by which a computer system supports the activities of geographically dispersed participants and enables them to share ideas and artefacts. This paper aims to dispel this unified approach to the definition of and in turn the design of aids to cooperative work. The paper starts by surveying the history of the field of computer-supported cooperative work and design. Then, the paper presents three tasks and their associated aids. The first system helps designers to create and discuss a hierarchical building program and share schematic drawings. The second system allows a jury to anonymously review a set of submissions. The third system allows a hierarchically organised group of participants to search, retrieve, organise and share a set of digital media assets. All systems are web-based and use the same underlying object-oriented technology. The paper provides a brief case study that describes the main features of the three pieces of software as an example of the need for a variety of approaches in the support of cooperative work and design. The paper concludes by advocating an object-oriented, domain-specific approach to creating computer-supported cooperative systems based on the analysis of the task at hand.
keywords	collaboration, groupware
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	acadia03_018
id	acadia03_018
authors	Kalay, Yehuda E. and Jeong, Yongwook
year	2003
title	Collaborative Design Process Simulation Game
doi	https://doi.org/10.52842/conf.acadia.2003.133
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 133-141
summary	Collaboration is an important aspect of the architect’s education. However, it is not amenable to the traditional project-based learning pedagogy that works so well for developing form-making skills. Being a process, rather than a product, it cannot be revealed by judging the results alone, which is often how form-making skills are taught and judged. Rather, the process of collaboration is only evident when the number of the participants exceeds a certain threshold, and when actions taken by other participants affect an individual’s on-going design decisions. The advent of on-line, multi-player simulation games provides an analogy and an opportunity to explore interactive collaborative design pedagogies. Their abstract nature helps focus attention on the core issues of the simulated phenomenon, while the playful nature of a game, as opposed to “work,” encourages immersion and role playing that contribute to the learning process. This paper describes an on-line game for simulating the design collaboration process. It espouses to simulate, exercise, and provide a feel for the social dimension of collaboration, by embedding mutual dependencies that encourage players to engage each other—in adversarial or collaborative manners—to accomplish their goals. Specifically, it is intended to help students understand what collaboration is, why it is necessary, and how it is done. The game is modeled after popular board games like Scrabble and Monopoly: players build “houses” made of colored cubes on a site shared with other players. Actions taken by one player immediately affect his/her neighbors. A carefully constructed set of rules awards or deducts points for every action taken by a player and by his/her neighbors. The rules were constructed in such a manner that players who collaborate (in a variety of ways) stand to gain more points than those who do not. The player with the most points “wins.”
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: