Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	1f6d
authors	Mourshed, M. M., Kelliher, D., Keane, M.
year	2003
title	Integrating building energy simulation in the design process
source	IBPSA News, Vol. 13, No. 1, pp. 21-26.
summary	To significantly increase building energy performance, the use of building simulation software at the earliest has been emphasized. Inherent complexity in data representation, I/O (Input and Output) and Visualization of available software requires specialist knowledge to leverage the potentials offered. Early stages of design are characterized by unstructured and incomplete data which is insufficient as inputs to software based on detailed representations of the systems in the building. Existing simulation software, developed in research organizations are targeted to be used by building services engineers at detailed stages and does not suit the purposes of design community. This article attempts at identifying the reasons behind unpopularity of simulation software in the early stages of design and also argues that a new breed of decision support systems is needed for energy efficient building design.
keywords	ArDOT; Energy Simulation; Integration; Environmental Design; Design Process
series	other
email
last changed	2003/05/27 17:19

_id	cf2003_m_094
id	cf2003_m_094
authors	GARCIA, Renato
year	2003
title	Feeling the Heat - Exploring the Impact of Fire in Architectural Structures though Multimodal Interaction
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 383-392
summary	This paper discusses the background and basis behind a computer program developed by the author that incorporates a haptic feedback and audio interface into a visually interactive simulation of the structural response of buildings to fire. Structures are limited to steel in particular. The audio interface makes use of sonification and affective techniques while the haptic interface takes advantage of force feedback technology. The simulation is also meant to be holistic, qualitative, intuitive, temporal yet interactive. The primary innovation in this fire simulation system is the incorporation of audio and haptic feedback interaction into the usual visual interface.
keywords	computing, force feedback, HCI, interface, sonification
series	CAAD Futures
last changed	2003/09/22 12:21

_id	caadria2003_b4-1
id	caadria2003_b4-1
authors	Kuo, Chung-Jen
year	2003
title	Spatial Analysis of Chinese Garden Designs with Machine Learning
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 541-552
doi	https://doi.org/10.52842/conf.caadria.2003.541
summary	This research intends to propose a scheme for analyzing Chinese Garden Design by incorporating spatial theory, data mining, concept of object, and network-like data structure. Design elements of Chinese garden are placed in a network according to the existing gardens according to spatial theory. Collected networks are then divided into pair of elements connected by their relationship and stored in a database. Later, data mining is applied to attain patterns from the node-and-relationship pairs. Meanwhile, the elements of the same level can be classified and data grouping can be done by the implementation itself. Thru this research, we can gain insight upon the spatial information and relationship between elements of Chinese garden designs. The result is a set of more concise and structural descriptions, which reveals the rhythm behind the Chinese garden design and can be a great pedagogical aid.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	2206
id	2206
authors	Kvan, Thomas
year	2004
title	REASONS TO STOP TEACHING CAAD
source	Mao-Lin Chiu (ed), Digital design education, Garden City Publishing, Taipei 2003, ISBN 9867705203
summary	Computers are a problem. They are expensive, even if the prices have dropped dramatically and promise to continue dropping. They do not look after themselves but demand considerable attention – we have to hire computer specialists to ensure they talk to each other, staff are required to make sure software is installed and to fix things when it no longer works. Learning to use them is tedious; skills have to be developed to master several idiosyncratic software systems. The hardware and software regularly malfunction. It is faster to draw a line by hand than with software. Students already have enough trouble learning how to stop a window leaking or ensure a fire escape route will protect people in time of trouble, why make them learn all these other things. We should stop teaching CAAD. Although technological and economic issues are very real and not to be dismissed lightly, the real problems of teaching CAAD are not these. The real issues we need to address is how we teach and, behind that, why we teach. This paper explores the what and why.
keywords	pedagogy
series	other
type	normal paper
email
last changed	2004/09/27 07:10

_id	caadria2003_k-1
id	caadria2003_k-1
authors	Patummanon, Tipsuda
year	2003
title	Architecture of A49 - Architecture of Khun Nithi Sathapitanonda [Keynote]
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 5-11
doi	https://doi.org/10.52842/conf.caadria.2003.005
summary	I approach a bridge, an escape from the hard concrete floor of Bangkok, and happen to eavesdrop on the silent call of an elephant herd marching into my perception. It now appears in a forest behind the window of a large wall. The forest spreads deeper and deeper beyond the limit of a brick and concrete surface. The wall transforms into the mysterious rain forest of Thailand - robust, complex and healthy. A beam of friendly sunlight penetrates the air of an open well and greets the floor of the forest, it enters to enlighten all of its inhabitants' hearts. ... As I am immersed in the forest, I hear the chimes of its quietness and come face to face with the herd of elephants, marching into the middle of the place. ... All of the elephants in fact are made of wood, however their skin transcends the form of a hard wooden object for it is now transformed into the breathing skin of real elephants - the mothers of the forest. Wherever is felt the breath of the mother of the forest the place flourishes as a healthy world for all life. Here, I can hear the sonority of the quietness upon a visit to the office of A49, the office of Khun Nithi Sathapitanonda.
series	CAADRIA
last changed	2022/06/07 07:59

_id	caadria2003_a2-4
id	caadria2003_a2-4
authors	Seichter, Hartmut
year	2003
title	Sketchand+ a Collaborative Augmented Reality Sketching Application
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 209-222
doi	https://doi.org/10.52842/conf.caadria.2003.209
summary	The sketch is the embodiment of the architectural discussion. It incorporates rapidness and fuzziness and as this it is an object of interpretation. The interesting thing there is the question, if the usage of VR/AR already in the early phases of a design can have an impact for the quality of a design-process. Examples like VRAM (Regenbrecht et al., 2000) or TAP (Seichter et al., 2000) showed that there is a huge potential for research. The sketch as one of the parts of an early design is tightly coupled with cognitive aspects and communication. Pictured by a sketch is just a snapshot of what have to be discussed in the ensuing design procedure. The intention behind this work is an exploration about a medium which is not yet adapted to the digital world (Myers et al., 2000) and it can be easily be described with the words of Harald Innis: Mankind constantly being caught in his own traps: language and systems, developed and most difficult to break down. (Innis, 1951)
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ijac20031103
id	ijac20031103
authors	Achten, Henri H.
year	2003
title	New Design Methods for Computer Aided Architectural Design Methodology Teaching
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Architects and architectural students are exploring new ways of design using Computer Aided Architectural Design software. This exploration is seldom backed up from a design methodological viewpoint. In this paper, a design methodological framework for reflection on innovate design processes by architects that has been used in an educational setting is introduced.The framework leads to highly specific, weak design methods, that clarify the use of the computer in the design process.The framework allows students to grasp new developments, use them in their own design work, and to better reflect on their own position relative to CAAD and architectural design.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	ijac20031107
id	ijac20031107
authors	Berridge, Philip; Koch, Volker; Brown, Andre G.P.
year	2003
title	Information Spaces for Mobile City Access
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper describes two complementary European research projects that share common interests and goals.The work described is intended to facilitate city analysis and support decision-making. The first project focuses on the distribution, access and ease of use of city data. The system allows access to historical data concerning key buildings in Liverpool, England, via a suite of web-based tools and a palmtop device. The second project looks at extending the functionality of traditional computer aided design (CAD) software to enable geometric and semantic data to be combined within a single environment. The system allows those involved in city planning to better understand the past and present development pattern of an area so that their decisions on future proposals are better informed.The paper concludes by describing a system that integrates particular aspects of the two projects, and the potential that this integration can bring.This new work provides mobile access to historical city development data, current city information and tools to support urban project development.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	9b4d
authors	Boerner, Wolfgang
year	2003
title	The “Franziszeische Kataster” (land register) – Only a historial Map?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Franz I. of Austria that the legislative and technical hindrances were cleared away in order to commence with big changes. One cantruly say that it was due to his land tax patent from the 23rd of December 1817 that he founded the main land register of Austria andof the whole empire. The basic ideas of this patent are still valid today.This land register, named after it’s originator, was also said to be a “stabile” land register because the net profit rate, which wascrucial for the rating of taxation, was to be stabilized without giving consideration to higher productivity or diligence except to casesin which the fertility of the earth was destroyed by natural phenomenon.The land register was developed for the city of Vienna in the years 1819 to 1824. This land register of Vienna was scanned and digitized by the Urban Archaeology of Vienna. Since the launching of the “Kulturgüterkataster (Cultural Heritage Cadastre)“ in 1996, the individual municipal departments of the City of Vienna have developed a massive body of know-how regarding the various fields of interest. In particular, the inventoryingand evaluation of architectural objects as implemented by the City of Vienna could be easily adapted to other EU cities. It has alreadybeen suggested to initiate corresponding EU projects or participate in such.The long-time objective is an Internet portal. Based on the applications and competence developed in Vienna, the cultural assets of European metropolises could be digitised to present them in a novel forum. Lovers of culture, historians and urban planners would thus dispose of an instrument that renders urbanistic research much more efficient. Here, the “Franziszeischer Kataster“ could play a key role. Especially in the candidate countries in Eastern and South-eastern Europe, land surveying to this day would be unthinkable without this land register. A digital version of the register, could provide enormous support to the surveyor’s offices in the new Member States.
series	other
email
last changed	2003/11/21 15:16

_id	caadria2003_b5-2
id	caadria2003_b5-2
authors	Caldas, Luisa G.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms Integrating Conflicting Design Objectives in Low-Energy Architecture
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 681-694
doi	https://doi.org/10.52842/conf.caadria.2003.681
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect, and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], a building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use, and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2003_088
id	sigradi2003_088
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2003
title	Needs Requirements Performances Vs Goals Constraints Values in Collaborative Architectural Design
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The following is a report on an on-going research study aimed at defining a support system for Collaborative Design in architecture. This paper concisely shows the latest results. In the present report the emphasis is laid on the relations among the operators and their different goals. We studied the preliminary phase of the architectural design, for which we defined a model and implemented a software system. The validity of the software system does not decrease when it is extended to the remaining design phases. The goal of the research is to improve collaboration among operators.
keywords	Collaborative Architectural Design, Knowledge Engineering, Design Goals, Constraints, Conflicts Reduction
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia03_033
id	acadia03_033
authors	Ceccato, Cristiano
year	2003
title	From Emergence of Form to the Forming of Logic
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 254-255
doi	https://doi.org/10.52842/conf.acadia.2003.254
summary	Driven by digital design tools and production methods, the interplay of theory and practice in architecture is converging on the notion of process. Process definition and process tools are now an essential part of design, design development, fabrication and construction. The word process itself can be interpreted in different ways, as being deterministic or non-deterministic. Computer programming can be understood as a design process and a structuring mechanism. Rather than making finite designs (products), architects are beginning to understand their roles as toolmakers, developing algorithmic processes that incorporate constraints and intents into software / procedures / programming. New methodologies such as parametric-associative design hierarchies are a clear example of semantic design structuring (a form of grammatical ordering); the creation of hierarchical parametric models can be understood as a form of visual programming. In a deterministic sense, it can be argued that if a process is correct and critical, then by definition so will be the product.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	cf2003_m_001
id	cf2003_m_001
authors	CHEVRIER, Christine and PERRIN, Jean Pierre
year	2003
title	ModLum - Illumination Project Aided Design Tool
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 361-370
summary	Illumination phenomena simulation is important for architectural project design and communication: simulation tools must assist efficiently the designer; results have to be reliable and realistic for the decision-makers. Indeed, it is very difficult, for a nonspecialist to imagine the result of an illumination from the light designer plans. Experience shows that the success of a photo-realistic simulation relies essentially on the choice of the light source characteristics and their correct positioning in the scene. This paper first presents the specificities of illumination projects (very large geometrical data bases enlightened by a large amount of light sources) and the difficulties of their set-up. Light arrangement requires tricky compositions, judicious choices and accurate studies. Currently there is no specific modeller for the handling of light sources as they are considered in radiosity software. Then we present the interactive tool we have developed, named ModLum, in order to set up light sources in a 3D architectural model in order to save time during the design step and simplify the source handling. ModLum specifications and principles are presented. Finally, an application is presented: the illumination project of two cloisters in Quito (Ecuador, South America).
keywords	architecture, lighting, simulation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	caadria2003_b4-2
id	caadria2003_b4-2
authors	Choi, Jin Won and Park, Jae Wan
year	2003
title	Developing a Building Design Compiler that Frequently evaluates Building Design Performance within the Design Process
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 553-566
doi	https://doi.org/10.52842/conf.caadria.2003.553
summary	This paper demonstrates an experience in the development of a design performance evaluation system that can frequently evaluate building design performance within the design process in a real-time manner. The evaluation system, that we call "design compiler," is composed of several modules such as a front-end component-based CAD engine, a knowledge base, and a set of design agents. The notion of the design compiler is quite similar to a compiler for computer programming such as a C compiler. While a computer programmer compiles a set of programming codes to check compiling errors during the implementation of a software system, an architectural designer can 'compile' his/her intermediate design product to evaluate design errors during the design process. The compilation can be done immediately at any level or any time during the design process in a real-time manner. We expect that this compiling process will dramatically increase design feedbacks, and thus result in a better design product. Further research issues that have been identified at the end of the research include increasing the modeling capability, extending to multi-story building representation, developing various design agents, exploring better ways to request and manage design knowledge, and supporting design collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2003_058
id	sigradi2003_058
authors	Christakou, Evangelos Dimitrios
year	2003
title	Simulação computacional da iluminação natural aplicada ao projeto do edifício (Computer simulation of natural ilumination applied to the building design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The object of that study is the state of the art in computer simulation, when applied to the natural illumination in buildings, in Brasília (15°52 ' south), tropical climate of altitude, hot and dry, with great available iluminance during the year. The used methodology bases on the quantitative evaluation of the readiness of natural light in the rooms of the Hospital Sarah Kubistchek, using the software Lightscape and soon after comparing the results to the Brazilian norms. The objective seeks to make possible your use by architects in the day by day of projecting the space of the building.
series	SIGRADI
email
last changed	2016/03/10 09:49

For more results click below: