Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 602

Reformat results as: short short into frame detailed detailed into frame

_id	acadia03_004
id	acadia03_004
authors	Williamson, R. Shane
year	2003
title	Process and Individuation: Designing for Controlled Indeterminacy
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 29-37
doi	https://doi.org/10.52842/conf.acadia.2003.029
summary	Through the presentation of the design of a memorial, this paper intends to introduce an iterative design process that incorporates particle-based animation, parametrically constrained operations, and a variety of rapid-prototyping techniques. This is a project rooted in the generation and interpretation of physical artifacts dependent upon both the generative potential of digital media and the subjective modifications associated with design authorship It is stated in the brief for this ACADIA topic node that “the maturity of design, modeling, visualization, manufacturing and collaboration tools has allowed them to be naturally and comfortably integrated into the design process at all stages.” As such, the design statement for this memorial makes no mention of the incorporation of digital media. Process is subordinate to its result. Simply, the victims’ families would not find the range of technology incorporated in this design pertinent to the matter at hand: the design of a memorial to honor the victims of the attack on the Pentagon. Within the context of this “Digital Design” topic node, though, it is my intention to expose the digital underpinnings of this project and position it within a discourse somewhere between ars accidentalis and the constraints of fully parametric and geometrically-associative design.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	sigradi2003_070
id	sigradi2003_070
authors	Angulo, Antonieta H. and Vásquez de Velasco, Guillermo P.
year	2003
title	El Uso de Scaners y Ploteadores Tridimensionales en Talleres de Diseño Iniciales (The Use of Three-dimensional Scanners and Plotters in Early Design Studios)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper makes reference to the introduction of a new pedagogical strategy in the teaching of fundamental design in early design studios. The authors recognizes a relationship between the creative process and the media that supports the design process, and proposes the use of 3-dimensional scanners and plotters (rapid prototyping) for interfacing between the use of digital and analogue media. The paper suggests that in such learning environment the students will learn to design without the limitations that analogue or digital media will individually impose in the creative process. The paper ends with an outline for a relevant design exercise.
keywords	Conceptual design, 3-d scanners, 3-d plotters
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2004_292
id	2004_292
authors	Modeen, Thomas
year	2004
title	Using Solid Freeform Fabrication for the Conceptualization and Corporeal Actualization of Architecture
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 292-301
doi	https://doi.org/10.52842/conf.ecaade.2004.292
summary	This paper forms an update to the paper presented ar eCAADe 2003, in Graz. It is a summary of a project which aim is to suggest an alternate methodology for utilizing additive Solid Freeform Fabrication (more commonly known as Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive SFF production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Whereas the paper in Graz introduced the conceptual foundations and the taxonomy of the project, the aim in this years paper is to present some of the realized designs and discuss, in brief, how what has been learnt could be furthered as the project proceeds. The three designs described in more detail in the paper, all catalyzed by a specific sensory notion, would have been very difficult, if not impossible, to fabricate by any other means than additive Solid Freeform Fabrication.
keywords	Architecture, Design, Solid Freefrom Fabrication, Senses
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade03_329_27_sperling
id	ecaade03_329_27_sperling
authors	Sperling, David
year	2003
title	Diagrams, Modeling and Rapid Prototyping: Interface Between Design of Form Process and Topology
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 329-332
doi	https://doi.org/10.52842/conf.ecaade.2003.329
summary	This paper investigates the concept of topological processual diagrams, geometric way of surfaces construction in topology, and the paradigm of homoeomorphism shaping, procedure that keeps topological properties. It explores possibilities of using it as a process of architectural shape generation, combined to computer-aided modeling tools and rapid prototyping. It intends to go through two complementary ways of translation between object shape and topology: the making of architectonical objects in topological surfaces and, on the other way, the exploration of topological surfaces as architectonical objects.
keywords	Diagram; topology; design process; rapid prototyping
series	eCAADe
email
last changed	2022/06/07 07:56

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	acadia05_254
id	acadia05_254
authors	Sheil, Bob and Leung, Chris
year	2005
title	‘Kielder Probes’ – bespoke tools for an indeterminate design process
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 254-259
doi	https://doi.org/10.52842/conf.acadia.2005.254
summary	Sixteen (makers) are a group of practicing architects, academics, designers and makers who assemble when key questions surrounding design, fabrication, use and adaptability in architecture emerge. Initially, the group was formed out of a motivation to engage as designers with the physical and tactile aspects of production without a dependency upon drawing. Now, in the post digital age, the age of digital fabrication, boundaries between drawing and making, between the designer and the maker, have dissolved. Consequently sixteen(makers) work is now engaged with questions of knowledge transfer, expertise, and innovation where modes of investigation are equally embedded within in the analogue and the digital world. This article relates to our latest ongoing work which is due for completion in 2005/06. The work has been developed as a specific response to the award of an architectural residency by the Art and Architecture Partnership at Kielder Park, Northumbria, England. From the outset, it has not been a requirement of the residency that an outcome is identified early on. In fact, as I write, the outcome remains open. Presented with an extraordinary site and coinciding with a time of rapid change the work has begun by exploring a design process that is adaptable, indeterminate, and informed by site conditions. In October 2003, sixteen(makers) were awarded an architecture residency by The Art and Architecture Programme at Kielder (AAPK) of Northumbria, UK. This organization is well known for commissioning works such as the ‘Belvedere’ by Softroom and the ‘Skyspace’ by James Turrell. Coordinated by Peter Sharp, AAPK consists of a number of large public bodies, including The Forestry Commission, Northumbrian Water and Tyndale District Council. Together they manage a land area of 62,000 ha’s centred on the UK’s largest reservoir and surrounded on all sides by one of Europe’s largest managed forests.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	cf2003_m_026
id	cf2003_m_026
authors	WYELD, Theodor G.
year	2003
title	An Object Server System for 3D Digital Design Collaboration
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 235-248
summary	Moving through and between computer generated 3D objects we experience a 'virtual world'. Virtual Worlds have created a dream-like landscape. They also have facilitated a paradigm shift for architects working with CAD tools where they now desire to “design three-dimensional spaces in an immersed way” (Strehlke and Engeli 2001). Architects are already working in computer-moderated collaborative networked organisations. A 3D Virtual World offers a different kind of collaboration. To understand how architects might design in an 'immersed way', three experiments are described. The experiments attempt to investigate how participants experience the 3D spaces within which they collaborated. In particular, the last experiment makes use of 'shared objects' in the scene. The software chosen to create these Virtual Worlds was VRML and JAVA due to their flexibility and rapid prototyping. Where VRML differs from most CAD languages is in its openness. This paper describes an object sharing client-server architecture based on a simple multi-user system providing navigation in CosmoPlayer 2.11 ported through Netscape. The Object Server System allows multiple clients, as avatars, and objects to be manipulated in a 3D Virtual World. The system updates the transforms of the objects explicitly allowing their transform values to be shared across multiple browser sessions.
keywords	collaboration, multi-user, object sharing
series	CAAD Futures
last changed	2003/09/22 12:21

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade03_441_16_fischer
id	ecaade03_441_16_fischer
authors	Fischer, T., Burry, M. and Frazer, J.
year	2003
title	Triangulation of Generative Form for Parametric Design and Rapid Prototyping
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 441-448
doi	https://doi.org/10.52842/conf.ecaade.2003.441
summary	In this paper we discuss recent developments in the ongoing implementation of a toolkit for developmental generative design and form finding. We examine tissues of face-centered cubically close-packed voxel cells and topologically related structures for the possibility of 3D data conversion and of rapid prototyping applications. We also demonstrate how generative and parametric design can be integrated in order to enhance design flexibility and control.
keywords	Parametric design, digital morphogenesis, cellular expression, geometry triangulation
series	eCAADe
email
more	http://www.sial.rmit.edu.au
last changed	2022/06/07 07:50

_id	fb56
id	fb56
authors	Kvan, Thomas; Thilakaratne, Ruffina
year	2003
title	MODELS IN THE DESIGN CONVERSATION: ARCHITECTURE VS ENGINEERING, DESIGN + RESEARCH: PROJECT BASED RESEARCH IN ARCHITECTURE
source	Editors: Clare Newton, Sandra Kaji-O'Grady and Simon Wollan ISSN: 1449 1737, Association of Architecture Schools of Australasia, 2003 Melbourne, Australia
summary	Models are used in architectural design for several purposes. Early in a design cycle, sketch or study models will be created to examine particular aspects of a design idea. Such models are often assembled rapidly and crudely for it is the immediacy of the feedback that is sought. At later stages in a design cycle, more carefully assembled detailed models may be created to present ideas to colleagues, clients or decision-making bodies. Extending Schön’s observation that drawing is a process of conversation, we observe that models also participate in conversations. The introduction of digital media changes the nature of the conversation. This research revisits the role of models in the design conversation. It has been noted that models can be classified in two roles: ‘models of’ and ‘models for’. In architecture, we extend this by adding ‘models with’ as we employ three and two dimensional representations in the conversations of design. This paper presents experiences with students in the use of Rapid Prototyping technologies and manually made physical models in design tasks.
keywords	Rapid prototyping; models
series	other
type	normal paper
email
more	http://www.arbld.unimelb.edu.au/events/conferences/aasa/papers
last changed	2004/09/24 14:36

_id	ecaade03_347_163_shih
id	ecaade03_347_163_shih
authors	Shih, Naai-Jung
year	2003
title	The Application of Color-image-mapped Rapid Prototyping in Architectural 3D Modeling
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 347-350
doi	https://doi.org/10.52842/conf.ecaade.2003.347
summary	The purpose of this study is to present an application of an RP machine in the substantiation of architectural design concepts, using color image mapping to enhance visual details. Related visualization leads to the exploration and comprehension of shapes. Exemplification can be seen in the verification for proofing or documentation of as-built models, such as paper architecture, process modeling, furniture, partitions, and construction details. The influences on architecture reveal issues related to pedagogical exploration, interdisciplinary exploration, reality management, and visual detail and structural detail.
keywords	rapid prototyping; 3D printer; 3D modeling
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia03_009
id	acadia03_009
authors	Shih, Naai-Jung
year	2003
title	Digital Architecture - What Would 6000 Points Turn Out To Be?
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 67-73
doi	https://doi.org/10.52842/conf.acadia.2003.067
summary	This paper presents students’ fulfillment of an assignment that explored the concepts of digital architecture using rapid prototyping (RP) process. A point cloud was given to students, and different representational data were substantiated as real 3D physical models. The presence of RP models and the sequential illustration of working steps in their reports revealed that the control of shapes often differed from what students perceived in VR worlds. The results thus confirm that physical models are useful for visualization as well as in design pedagogy.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_119
id	sigradi2003_119
authors	Bermudez, J., Foresti, S., Agutter, J., Westenskow, D., Syroid, N. Drews, F. Tashjian, E. and Adams, V.
year	2003
title	Metodología Interdisciplinaria para Diseñar Nuevas Arquitecturas de Representación de Datos (Interdisciplinaria Methodologies for the Design of a New Architectures of Data Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Data representation architecture can be defined as the organizational, functional, experiential, formal, and media-technological order defining the interaction between data, representation, and user. This paper presents an interdisciplinary methodology to develop such architectures in order to significantly improve real time decision making in complex data environments. We have reported in some aspects of this work elsewhere. In this occasion, we will describe our working methodology based on complete interdisciplinarity, the design process and evaluation protocols. We will show work done for Finance and Network Monitoring. Our long-term goal is to design a new generation of data representation architectures that is applicable to diverse fields.
keywords	Data representation; visualization; design, architecture, interdisciplinary
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2003_a1-2
id	caadria2003_a1-2
authors	Bunyavipakul, Monchai and Charoensilp, Ekasidh
year	2003
title	Designing the Virtual Design Studio System for Collaborative Work on Pda Collaborative Works Anytime, Anywhere
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 43-54
doi	https://doi.org/10.52842/conf.caadria.2003.043
summary	This research presents the collaboration in the VDS system through a microcomputer technology- a PDA (Personal Digital Assistants). Architect can collaborate anytime anyplace via VDS, a substitution to an old system that requires a specific location to work on. This research has studied and analyzed the format and the limitation of collaboration between PDA and Personal Computer, the wireless communication technology, and the Web Service technology, which enable different devices to share information through the Internet Network. The work process and the studied information have been used to develop a Web Application, a collaboration tool for a team of architect and designer. This Web Application has been tested in a renovation project, a clubhouse for a scuba diving place The objective of this research is to become a guideline of collaboration in architectural design work through Smart Object in order to serve the coming Ubiquitous era (Weiser, 1998)
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2003_a1-1
id	caadria2003_a1-1
authors	Burrow, A., Burry, J., More, G., Tengono, Y. and Burry, M.
year	2003
title	Visual and Sonic Communication Representations to Support Design Interaction
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 29-42
doi	https://doi.org/10.52842/conf.caadria.2003.029
summary	Interaction between collaborating parties exerts strong and surprising forces on the design process and thus its outcomes. Hence, there is much to be gained by investigating the nature of these communications. By definition, an organisation establishes clear protocols to realise effective communication, and does so in response to business needs. In contrast, creative endeavours must often harness loose teams of specialised individuals, working in different contexts, disciplines, and language bases, and relying on nonformalised yet highly selective exchanges of information. It is therefore a considerable challenge to comprehend and improve these processes. One approach is to exploit the discrete information contained within digital communications to produce models of these complex conditions. This paper reports preliminary work to identify the components of an email visualisation system. The goal is to apprehend developing structures, providing the collective with the capacity for reflection.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia03_008
id	acadia03_008
authors	Cabrinha, Mark
year	2003
title	Function Follows Form: 10 Sticks (and a Bench)
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 57-65
doi	https://doi.org/10.52842/conf.acadia.2003.057
summary	While the introduction of digital media in the design studio often emphasizes virtual realms, the effect of new fabrication technology on the architect brings the architect back to the realm of master-builder rather than distancing the architect from reality. While purely digital projects have pushed the development of form, they have also placed an emphasis on form over material. However, with the intention to physically build a project, the connections between process, form, and material become intertwined. The inception of this project also served as a clear reminder that the tools we use affect the way we think. This project began as a simple idea: how a column becomes animated to form an arch over time. The digitization of this idea took literally minutes in Maya. It was exported and further modeled in AutoCAD, and then rendered and reanimated in 3D Studio-Viz. This was a very brief, two-week introductory project, in a class on drafting and wood light-frame construction. It served to make a greater connection between digital media, the design process, analog drawing, and the role of craft and material.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia03_058
id	acadia03_058
authors	Cerone, J. and Johnston, S.
year	2003
title	Elementary School: The Design Process
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 430
doi	https://doi.org/10.52842/conf.acadia.2003.x.f3n
summary	Although the fi nal presentation documents were all either generated orprocessed by computer, the steps leading to a fi nal product were theresult of constant interaction between computer and paper. The processbegan on paper with quick sketches of the main grid elements—the mostfundamental pieces of the “kit of parts”.
series	ACADIA
last changed	2022/06/07 07:49

_id	cf2003_m_103
id	cf2003_m_103
authors	CHANG, T.-W., WOODBURY, R. and DATTA, S.
year	2003
title	Interactive Mapping between Knowledge Level and Symbol Level with Geometry. A KL-Model for Design Space Exploration
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 157-166
summary	Design space exploration is long-standing motivating ideas in computer-aided design. It realises this vision through a model of design states for making and moving amongst states and an organisation of states into a structure called a design space. Using a design space structuring mechanism based on a subsumption relation, this paper sketches a theory called Geometric Typed Feature Structures (GTFS) to preserve the formal properties of the design space movement algorithms for geometry. It also provides the theory for incorporation of user-guided exploration in the design space. Consequently, the clear division between knowledge level and symbol level, such that functional decomposition •• formal symbol level and design •• model symbol level, disappears. We can therefore use the same subsumption relation to structure the design space exploration interactively. Such interactive mapping between knowledge level and symbol level provides the fine-grained opportunities for user intervention in formal design space movement algorithms. In this paper, we summarize this approach with an example of GTFS subsumption process.
keywords	design space, geometric description, knowledge level, subsumption, unfolding
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	ecaade03_659_166_hungming
id	ecaade03_659_166_hungming
authors	Cheng, Hung-Ming
year	2003
title	A digital modeling with reasoning system in early phase of design
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 659-664
doi	https://doi.org/10.52842/conf.ecaade.2003.659
summary	This study describes statue in the early phase of design, the approach taken by its conceptual development and manipulation. And on the developing digital tools provide a computational support for the process of indexing and retrieving. The digital modeling also addresses specifically architectural programming, adjacent relationship between the building element and articulation in designing. The overall in building mass development starting with reasoning of the conceptual model in early phase try to find evocative cases to help designer thinking. And finally discuss some issues and challenges of artificial intelligent. The research for representing designer’s creativity and searching solution provide another way to generate an articulating conceptual model. The integration approach of research starts with the pure case-based and rule-based reasoning system to help designer generate more understandable and creative product in the architectural design application.
keywords	Case-based reasoning, conceptual model, computer aided design, buildingmass development, design process
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: