Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2003_b5-2
id	caadria2003_b5-2
authors	Caldas, Luisa G.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms Integrating Conflicting Design Objectives in Low-Energy Architecture
doi	https://doi.org/10.52842/conf.caadria.2003.681
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 681-694
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect, and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], a building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use, and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20031402
id	ijac20031402
authors	Caldas, Luisa G.; Norford, Leslie K.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms: Integrating Conflicting Design Objectives in Low-Energy Architecture
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	1373
authors	Pfaffenbichler, Paul C. and Emberger, Günter
year	2003
title	Are European cities becoming similar?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The paper discusses city specific development patterns to overcome todays transport problems. The results are based on recent andongoing research activities at TUW-IVV and ITS. At previous CORP-conferences, we presented the basics and the development of aplanning support tool to find optimal policy packages in urban transport and land use (Emberger, 1998), (Pfaffenbichler, Emberger, 2001). The core of this planning support tool is a dynamic land use and transport interaction model. This model, which we refer to as Sketch Planning Model (SPM), is embedded into an appraisal and optimisation framework. The SPM and this framework were developed in the recently finished European Union funded research project PROSPECTS1. Case studies with this planning supporttool were performed within PROSPECTS for the cities Edinburgh, Helsinki, Madrid, Oslo, Stockholm and Vienna. These cities are principally comparable in regards of their status (capitals and major business and education centres), but different in their size, population density, transport system etc. A set of policy instruments like public transport improvements, car traffic restrictions, and infrastructure provision was available to formulate strategies to reduce negative impacts of transport and to increase welfare. The overall objective was a sustainable development of the city. Although the instruments and the goals are similar in all investigatedcites, different solutions were adequate. The solutions vary in regard of spatial implementation, implementation time and level of implementation. The paper will highlight some reasons for the different development paths of the cities. As well the comparison of the do nothing scenario as the comparison of the most feasible policy strategies shows that European cities are different, need different solutions for their problems and will stay different in the future.
series	other
email
last changed	2003/03/11 20:39

_id	caadria2003_b1-2
id	caadria2003_b1-2
authors	Chakraborty, Somen
year	2003
title	Automated Generation of Residential Roomlayout within a Constrained Covered Area
doi	https://doi.org/10.52842/conf.caadria.2003.085
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 85-100
summary	A significant quantum of all buildings constructed in modern times is designed for residential purpose. A tremendous amount of money is being spent every year for construction of residential buildings. Therefore, optimization of design becomes very important. In a country like India most people in urban area live in houses having constrained area. A significant part of residential units comes under mass housing either as high-rise building blocks or as plotted developments. In any of such schemes there are large number of housing units for a group of families of whom general characteristics are known but characteristics of individual families are not known at the time of designing. This situation is, however, suitable for scientific investigation and analysis based on statistical surveys. Broadly speaking, this paper suggests approach to deal with this situation of finding optimum layout of rooms of a housing unit for any target group of families when the covered area is so constrained that freedom of using different criteria like aesthetics, structural systems, materials and methods of construction in varieties of ways is drastically reduced. In such constrained area for housing units rooms are generally found rectangular within overall rectangular outline of each unit. Method shown here is valid under this restriction. It is also assumed that number of rooms will be restricted to such number that exhaustive search for design is practically possible within a reasonable time with present day capabilities of normally available PCs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia03_003
id	acadia03_003
authors	Chang, W. and Woodbury, R.
year	2003
title	Undo Reinterpreted
doi	https://doi.org/10.52842/conf.acadia.2003.019
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 19-27
summary	The class of operations known as “undo” has proven to be a valuable addition to most professional work tools. In practice though, its use is frustrating: undo often undoes too much. Its essential informal semantics are that it returns the user to a prior state by recapitulating all intervening states. Why not give the user greater control over which aspects of a design to undo? An alternative is to seek to reuse prior work in any logically-coherent pattern—user input is a precious commodity. The area of generative systems provides insights in a search for alternatives to undo, in particular that prior user and system actions can be changed and reused in new contexts. We contingently introduce a concept we label as design promotions to describe system designs that demonstrate a tight coupling between interactive authorship and system-led generation, that treat past user actions as valuable intentional statements, and that treat alternative user choices as first-class objects of concern. In practice these three properties emphasize reuse. We briefly survey the current state of undo-like operations and potential candidates for implementing design promotions strategies. Through examples, we demonstrate approaches to realizing undo-like operations over specific representations, especially that of constructive solid geometry.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	avocaad_2003_03
id	avocaad_2003_03
authors	Dag Boutsen
year	2003
title	AN INCLUSIVE ‘WORK-METHOD’ AND A SPECIFIC SEARCH FOR FULLY SUPPORTED SOLUTIONS THROUGH SUBJECTORIENTED DESIGN (INSTEAD OF OBJECT-ORIENTED)!
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper talks about the hardness of CAAD.And it talks about the necessity to develop ‘soft’ CAAD.A lot of architectural adventures are stopped in the beginning or the middle of the road. Because of decisions far away from the designers or the clients. These decisions break in against some aspects of the design. Small details often kill a whole design-process.Does architectural design only belong to architects and planners ?To a “Me, myself and I”-world ? For the last 10 years, we have gained a lot of experience of designing architectural landscapes in a specific way. We design in such a way that developing projects can change or evolve strongly within themselves without losing their typical spirit. Change because of external and non-predictable events, change because of unexpected or changing circumstances, change because of the participation of new intervening people….New housing projects in Apeldoorn and Dordrecht,Rehabilitation projects in Gennevilliers (Paris) and Hellersdorf (Berlin), …Schools and hospitals in Amsterdam, …Each time very local aspects are incorporated in the different design-spirits.The networks are similar because of specific design-methods.This paper wants to explain something about this process-spirit.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
type	normal paper
email
last changed	2006/01/16 21:38

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2010_233
id	ecaade2010_233
authors	Guerbuez, Esra; Cagdas, Guelen; Alacam, Sema
year	2010
title	A Generative Design Model for Gaziantep’s Traditional Pattern
doi	https://doi.org/10.52842/conf.ecaade.2010.841
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.841-849
summary	This paper describes a research to develop new urban designalternatives for Gaziantep by using fractal based approaches. The aim of the research is not only generating new form alternatives but also considering the continuity of traditional architectural and urban pattern which faces deterioration. Within this study, it is intended to test the applicability of the fractal based generative approaches and explore the potential advantages. The method called CADaFED (Ediz, 2003) is updated to be used in one of the 3d modeling programs, 3DsMax scripting and it is used as an experimental tool in two-day student workshop. The working field is limited as Bey Neighbourhood in Gaziantep for its well-preserved architectural characteristics. In this paper, the outcomes of the student workshop will be evaluated and discussed in the sense of affirmative effects of fractal based design approaches.
wos	WOS:000340629400090
keywords	Generative design; Fractal based design; Computational architectural design; Traditional pattern
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade03_265_31_ham
id	ecaade03_265_31_ham
authors	Ham, Jeremy J.
year	2003
title	The Computer as a Tectonic Design Tool: Comparisons between Virtual and Actual Construction
doi	https://doi.org/10.52842/conf.ecaade.2003.265
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 265-268
summary	The potential of the computer as a tectonic design tool is explored in comparison to scaled physical models, drawings and real-scale modelling (actual construction). Analysis of media use is undertaken in a case study of a range of design projects of differing emphases in relation to student perceptions and assessment. Relationships are drawn between representational media actual construction to inform a discussion of effective and authentic means of teaching tectonics within the design studio.
keywords	Tectonics, 3D CAD, real-scale modelling
series	eCAADe
email
more	http:/www.ab.deakin.edu.au/online
last changed	2022/06/07 07:50

_id	caadria2003_a3-1
id	caadria2003_a3-1
authors	Huang, Chien-Pu
year	2003
title	A Body-Surrounding Study In Physical, Virtual and Mental Spaces
doi	https://doi.org/10.52842/conf.caadria.2003.343
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 343-358
summary	With the flourishing of architectural creation via all kinds of media, a comparison among physical, virtual and mental space becomes a fevered issue about spatiality due to the similar sense of space. This study reveals that even if the spaces constructed with distinct essence, a body-surrounding relation is an efficient way to formalize the problems of spatiality and relativity among three typical spaces. The sense of space and relative position reasoning were depicted with the Space-Transforming Test and the SpaceComprehending Test as a new concept about spatiality in general.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	b42f
id	b42f
authors	JS Gero and V Kazakov
year	2003
title	ON MEASURING THE VISUAL COMPLEXITY OF 3D SOLID OBJECTS
source	e-Activities in Design and Design Education, B Tuncer, S Ozsariyildiz and S Sariyilidiz (eds), Europia, Paris, pp 147-156
summary	A computational model of the visual complexity of solids is presented. It is based on using a qualitative representation for 3-dimensional objects as semantic graphs. Then information-theoretic measures are constructed for these graphs. This measure of visual complexity allows for the comparison of different architectural forms. An example of the application of this model is presented.
keywords	visual reasoning; complexity; 3D modelling
type	normal paper
email
last changed	2004/04/10 02:07

_id	f59d
authors	Koelbl, R., Bruntsch, St. and Knoflacher, H.
year	2003
title	Perspective Vienna – A Comparison of Planning Scenarios and Real Development
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	With the suspension of national boarders in unions of nations, cities and their regions gain in significance for the economic, social and cultural development. This is particularly valid for Vienna, which lies close to the eastern boarder of the European Union, which should fall with the enlargement of EU in the near future. Of prominent importance is therefore to obtain a comprehensive understanding between proposed and defined aims for an urban development, the related measures and their extent ofimplementations and their actual or real effects. This paper attempts to give a strategic analysis of the Viennese urban and traffic development programs, from 1962, 1972, 1984 and 1994, on the one hand, and the data analysis of the statistical year books beginning from 1960 until 2000, on the other. The results show that adjustments have been made not only in response to certain trends, but also to a change of philosophy of urban development. It can be seen that certain assumptions of, for example, economic and transport measures can have the opposite outcome in relation to the intended objectives. Hence, one main question remains to beanswered: How should Vienna deal with the challenges ahead, to secure and foster a sustainable development under such circumstances on a long-term basis. In this respect, some measures are given, which should make it possible to overcome successfully these challenges.
series	other
email
last changed	2003/03/11 20:39

_id	caadria2003_b7-2
id	caadria2003_b7-2
authors	Schank-Smith, Kendra
year	2003
title	Festina Lente and the Digital World
doi	https://doi.org/10.52842/conf.caadria.2003.951
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 951-962
summary	In this paper, I would like to explore a comparison of the issues of quickness and festina lente as metaphoric or analogous for the computer and its use. Computers in the twenty first century are a vital part of architecture whether used for conception or realization. We as architects and educators must cont inually question their use in the design process and their appropriateness for visualization. We can know and understand more about the role of computers in our discipline, by seeing them in relation to ideas of quickness and festina lente. Italo Calvino in Six Memos for the Next Millennium defines quickness as having several qualities, the most important being economy of expression, time as relative, swift reasoning and consciousness. This involves quickness as being both 'intelligent and witty,' a matter of physical speed versus speed of the mind. The dichotomy of swiftness and slowness may help us question how these two elements are not necessarily adverse but rather by being understood together, they may help us better appreciate the strengths of the computer in architecture.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac20031403
id	ijac20031403
authors	Schnabel, Marc A.; Kvan, Thomas
year	2003
title	Spatial Understanding in Immersive Virtual Environments
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	In this study, we examined the perception and understanding of spatial volumes within immersive and non-immersive virtual environments by comparison with representation using conventional media. We examined the relative effectiveness of these conditions in enabling the translation to a tangible representation, through a series of design experiments. Students experienced, assessed, and analysed spatial relationships of volumes and spaces and subsequently constructed real models of these spaces. The goal of our study is to identify how designers perceive space in Virtual Environments (VEs). We explore issues of quality, accuracy and understanding of reconstructing architectural space and forms. By comparison of the same spatial performance task undertaken within a Head Mounted Display, screen-based and real 2D environment, we are able to draw some conclusions about spatial understanding in immersive VE activity.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2005_2_52_159
id	cf2005_2_52_159
authors	SHIH Naai-Jung and WU Ming-Chang
year	2005
title	A 3D Point-cloud-based Verification of As-built Construction Progress
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 193-202
summary	Point clouds were overlapped to reveal differences between two working days. The same type of comparison was made between 2003.2.11 and 2003.12.11. Comparisons between the original schedule and real schedule (the catch-up schedule) were also made. The overlapping test provides one of the most comprehensive checking methods of the as-built progress in a digital format. Examples show that the overlapping comparisons help identify the addition and removal of objects scanned from 50 meters away. The geometric information is feasible for construction inspection and records. Limitations and benefits of overlapping are discussed.
keywords	3D scan, construction technology, schedule
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	50b1
authors	Abbasov, A.M. and Mamedova, M.H.
year	2003
title	Application of fuzzy time series to population forecasting
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The potential of fuzzy logic application in simulating of demographic processes by the example of population forecasting task hasbeen investigated. The particularities of population as dynamical system functioning under the condition of uncertainty have beenexamined and fuzzy statement problem has been suggested. The strategy of population forecasting using the method of fuzzy timeseries model has been proposed. The simulations on retrospective evaluation of population are carried out and on the base of the results of these simulations the conclusion avocet the effectiveness of utilization of fuzzy model for demographic forecasting has been model.
series	other
last changed	2003/11/21 15:15

_id	cf2003_m_006
id	cf2003_m_006
authors	ACHTEN, Henri and JESSURUN, Joran
year	2003
title	Learning From Mah Jong - Towards a Multi-Agent System that can Recognize Graphic Units
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 115-124
summary	Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an extended list of such conventions that are widely used. We propose that a multi-agent system for recognition of graphic units in drawings is fruitful: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. We first make a multi-agent system that can do something simpler: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) dynamically changing environment; and (4) search activity in more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems. The multi-agent framework and its implementation is presented. Various levels of game play are distinguished, and these are correlated to the multi-agent system. The paper shows how the findings form the basis for graphic unit recognition.
keywords	artificial intelligence, games, graphic units, agents
series	CAAD Futures
email
last changed	2003/11/22 16:39

_id	sigradi2003_096
id	sigradi2003_096
authors	Alvarez, Valeria and Albero, Constanza
year	2003
title	Una rama en la arquitectura de la era digital (A branch in architecture of the digital age)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Genetic information determines the germ of life, the first idea, that encloses all the power of creation. In every "germ" lays the identity, the strength to seek and fulfill expression in form. History, technical and scientific progress require new answers and provide new tools while encouraging investigation. A "Branch", a simple nature element, is reinterpreted into bits of information, reconstructed after being apprehended. This process reveals new elements that could have never been conceived with traditional methods. Nature and Technology complement each other in an embriological growing system that provides a new concept in the construction of real spaces.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia03_022
id	acadia03_022
authors	Anders, Peter
year	2003
title	Towards Comprehensive Space: A context for the programming/design of cybrids
doi	https://doi.org/10.52842/conf.acadia.2003.161
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 161-171
summary	Cybrids have been presented as mixed realities: spatial, architectural compositions comprised of physical and cyberspaces (Anders 1997). In order to create a rigorous approach to the design of architectural cybrids, this paper offers a model for programming their spaces. Other than accepting cyberspaces as part of architecture’s domain, this approach is not radical. Indeed, many parts of program development resemble those of conventional practice. However, the proposition that cyberspaces should be integrated with material structures requires that their relationship be developed from the outset of a project. Hence, this paper provides a method for their integration from the project’s earliest stages, the establishment of its program. This study for an actual project, the Planetary Collegium, describes a distributed campus comprising buildings and cyberspaces in various locales across the globe. The programming for these cybrids merges them within a comprehensive space consisting not only of the physical and cyberspaces, but also in the cognitive spaces of its designers and users.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: