Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	acadia03_005
id	acadia03_005
authors	Maher, Andrew and Burry, Mark
year	2003
title	The Parametric Bridge: Connecting Digital Design Techniques in Architecture And Engineering
doi	https://doi.org/10.52842/conf.acadia.2003.039
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 39-47
summary	New design opportunities that are facilitated by cross-disciplinary collaboration in both practice and research are available through the use of high level design software that simultaneously offers real time access to both analysis and design geometry in shared three-dimensional digital models. Here we present a collaborative research project between architects and structural engineers for the design of a pedestrian bridge, conceived to test current digital design processes in architectural and structural engineering practice with those in research through the use of models of parametrically defined associative geometry. In this project, the digital model’s architectural design geometry was constrained by the bridge’s fabrication methods and linked with its engineering analysis. Iterations of the design geometry were then optimised or ‘solved’ to produce variations according to the design parameters offered up for change. The shift of the professions from the plane to digital space exposes the possibilities of new design techniques with the exchange of design parameters potentially operating as a digital dialogue between the disciplines—a kind of digital version of Antoni Gaudi’s funicular hanging model—a metaphor of the digital space that has been developed for this project.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	cf2003_m_096
id	cf2003_m_096
authors	KOCATURK, T., VELTKAMP, M. and TUNCER, B.
year	2003
title	Exploration of Interrelationships between Digital Design and Production Processes of Free-form Complex Surfaces in a Web-Based Database
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 445-454
summary	The intention of this paper is to examine the mutual influences of initial architectural, structural and digital manufacturing related decisions on the evolution of free-form structures. A survey on current applications will be presented to lay the foundation for the examination of new production techniques and structural concerns for the computer generated expressive forms. Finally, the paper will describe an interactive web-based database project which aims to establish a grammar on the mutual influences of architectural, structural and production related features of free-forms. Based on the built examples of blob structures, the database serves as a catalogue of possibilities related to form, and facilitate assessment of the impact of the early choices on the free-form building design and development.
keywords	conceptual, free-form, web-based database
series	CAAD Futures
email
last changed	2004/01/15 11:41

_id	caadria2003_c6-2
id	caadria2003_c6-2
authors	Li Suping, Joo-Hwa Bay
year	2003
title	A Cognitive Framework of Collaborative Design Between Architects and Manufacturer-Designers
doi	https://doi.org/10.52842/conf.caadria.2003.855
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 855-870
summary	The widespread application of prefabricated products in building has made prefabrication an indispensable part of building processes. In this context, instead of handling every detail by architects themselves, some parts of architectural design have been transferred to manufacturer-designers. This inevitably brings about problems in the integration of prefabricated products and the specific buildings they serve. As a result, collaboration between architects and manufacturer-designers takes place in building processes in various forms and extents (non-, semi-, and full-collaboration). In this study, we aim to investigate collaborative design process from the cognitive aspect of design generation between architects and manufacturer-designers in terms of project-related products design. By applying the Kernel of Conceptual System theory (Tzonis et al., 1978), we intend to set up two empirical models in terms of design differences' formation in collaborative design process based on a case study with seeking the answers for the following research questions: 1. What kinds of design differences are raised in design processes? 2. Why the design differences are raised in design processes? 3. What implications could be made in developing computational models to facilitate collaborative design between architects and manufacturer-designers?
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia03_014
id	acadia03_014
authors	Woo, J.-H., Clayton, M., Johnson, R. and Flores, B.
year	2003
title	Case Study of Tacit Knowledge Sharing in a Distributed Design Studio
doi	https://doi.org/10.52842/conf.acadia.2003.107
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 107-116
summary	This paper demonstrates the effects of experts’ tacit knowledge on improving architectural students’ design artifacts in a distributed design studio. In geographically distributed design environments, the Internet is an important medium by which architects can share tacit knowledge in the form of dialogue via online communication technologies, such as online chat and Instant Messaging (IM). In spring 2003, the National Aeronautics and Space Administration (NASA) and 8 schools conducted a collaborative design studio to develop a crew restraint system for space flights. Online chat software was used as a primary communication channel. Throughout the entire design studio, NASA professionals served as knowledge holders while undergraduate students participated as knowledge seekers. An interpretive content analysis and case study methodology were used in this study. We qualitatively observed the interactions between NASA and the students based upon two aspects: knowledge reflection and design improvement. Data were collected using document analysis of all knowledge sources and students’ design artifacts. The findings of this study indicate that the online chat system is useful in sharing tacit knowledge for the early part of design processes in a distributed design environment. Experts’ tacit knowledge appears to not only influence how students understand problems, but how they initiate conceptual design. This study provides empirical evidence regarding tacit knowledge sharing, and strengthens Schon’s (1983) claim about knowledge reflection in design studio. Furthermore, this study introduces architectural practitioners to the practical necessity of tacit knowledge sharing. This study is significant because its findings indicate the appropriate knowledge management strategy for architectural practitioners.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ecaade03_407_19_sterk
id	ecaade03_407_19_sterk
authors	d’Estrée Sterk, Tristan
year	2003
title	Building Upon Negroponte: A Hybridized Model of Control Suitable for Responsive Architecture
doi	https://doi.org/10.52842/conf.ecaade.2003.407
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 407-414
summary	Responsive architecture is commonly defined as a type of architecture that has the ability to alter its form in response to changing conditions. While this description is successful in capturing the gist of the topic, it does not provide us with the more detailed understandings required to build it. The knowledge required to build a truly responsive form of architecture is substantial, an understanding of architecture, robotics, artificial intelligence and structural engineering are all beneficial. The links that are required between each knowledge base to actuate and control the responses of this type of architecture further complicate matters – suggesting potential reasons for the ambivalence of architects towards deeply exploring to the topic or extending it beyond the aesthetic application of an event-based architecture. This paper will build a model of responsive architecture that explains one possible approach to the topic, emphasizing ways to build it and control it in the process.
keywords	Controlling responsive architecture, Controlling networks of response buildings
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade03_000
id	ecaade03_000
authors	Dokonal, Wolfgang and Hirschberg, Urs (Eds.)
year	2003
title	Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2003
source	21th eCAADe Conference Proceedings [ISBN 0-9541183-1-6], Graz (Austria) 17-20 September 2003, 677 p.
summary	Digital Design is not only the title of the 21st eCAADe conference 2003 in Graz but also one of the main keywords in Architectural Education nowadays. Information Technology has managed to influence all fields of the “architectural process” and has developed straight from the calculation tools of the engineers over the CAD drafting boards of big architectural firms to every architectural professional and student. This process was incredibly quick in terms of the architectural chronology but very slow in terms of architectural education at universities (at least in Austria). Not very long ago it was sometimes forbidden to deliver CAD drawings for design projects at our faculty. In fact, the early experiments in using the computer in the design process quite often failed because of the restrictions of the available (and affordable) hard-and software. Today, even our first year students start some of their earliest design experiences quite naturally with the computer. However, there are still many questions to be answered and maybe some new questions to be asked in the relationship between architectural design and the computer. Architectural design is mainly a “game of imagination” and today computer tools start to enhance and support the architects visions after a longer period where they were often reduced by the limitations of the tools. Still, there are many different ways to design because every designer has a different approach towards architectural design and there is no such thing as “the perfect digital design tool” for everyone. We hope that this conference with all the different approaches documented in this book plays a major role in the discussion and development of all these aspects and brings us “one step further”.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	cf2003_m_006
id	cf2003_m_006
authors	ACHTEN, Henri and JESSURUN, Joran
year	2003
title	Learning From Mah Jong - Towards a Multi-Agent System that can Recognize Graphic Units
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 115-124
summary	Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an extended list of such conventions that are widely used. We propose that a multi-agent system for recognition of graphic units in drawings is fruitful: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. We first make a multi-agent system that can do something simpler: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) dynamically changing environment; and (4) search activity in more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems. The multi-agent framework and its implementation is presented. Various levels of game play are distinguished, and these are correlated to the multi-agent system. The paper shows how the findings form the basis for graphic unit recognition.
keywords	artificial intelligence, games, graphic units, agents
series	CAAD Futures
email
last changed	2003/11/22 16:39

_id	sigradi2003_070
id	sigradi2003_070
authors	Angulo, Antonieta H. and Vásquez de Velasco, Guillermo P.
year	2003
title	El Uso de Scaners y Ploteadores Tridimensionales en Talleres de Diseño Iniciales (The Use of Three-dimensional Scanners and Plotters in Early Design Studios)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper makes reference to the introduction of a new pedagogical strategy in the teaching of fundamental design in early design studios. The authors recognizes a relationship between the creative process and the media that supports the design process, and proposes the use of 3-dimensional scanners and plotters (rapid prototyping) for interfacing between the use of digital and analogue media. The paper suggests that in such learning environment the students will learn to design without the limitations that analogue or digital media will individually impose in the creative process. The paper ends with an outline for a relevant design exercise.
keywords	Conceptual design, 3-d scanners, 3-d plotters
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	avocaad_2003_17
id	avocaad_2003_17
authors	Anna Maria Chrabin, Jaroslaw Szewczyk and Herman Neuckermans
year	2003
title	A Critical Evaluation of Early Stages Software in its Capacity of Coping with Contextual Issues
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	In this paper we analyse critically early design stages software in its capacity of coping with contextual data at large (i.e. representing cultural, aesthetical context, etc.). We identified 5 categories of early stages software: geometry based graphic editors, evaluation architectural software, generative and shape-grammar based systems, evolutionary systems and other systems. Calling the object under creation during of the early stages a CAD conceptual model, we will investigate to what extend this software allows the architect to experience and represent the context in which a design is situated. Especially we will focus on its capacity to allow interaction, playful interaction on our way to the design. Designers, and particularly architects, interact with the local context similarly to interacting in a game: the context influences the users’ decisions, surprises them and causes permanent changes to their ways of thinking. On the other hand, architects permanently shape and reshape the context, and reduce the context to a protean point of reference. Such behaviour characterises creative thinking that is crucial for the early stage of design. The investigation led us to the conclusions that the effective interactivity with the context needs simple rules, a plain interface and data reduced as simple as possible, especially when interaction with the context is performed during the early stages of a design process. The findings can be used in organising computer environments for early-stage design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ecaade03_659_166_hungming
id	ecaade03_659_166_hungming
authors	Cheng, Hung-Ming
year	2003
title	A digital modeling with reasoning system in early phase of design
doi	https://doi.org/10.52842/conf.ecaade.2003.659
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 659-664
summary	This study describes statue in the early phase of design, the approach taken by its conceptual development and manipulation. And on the developing digital tools provide a computational support for the process of indexing and retrieving. The digital modeling also addresses specifically architectural programming, adjacent relationship between the building element and articulation in designing. The overall in building mass development starting with reasoning of the conceptual model in early phase try to find evocative cases to help designer thinking. And finally discuss some issues and challenges of artificial intelligent. The research for representing designer’s creativity and searching solution provide another way to generate an articulating conceptual model. The integration approach of research starts with the pure case-based and rule-based reasoning system to help designer generate more understandable and creative product in the architectural design application.
keywords	Case-based reasoning, conceptual model, computer aided design, buildingmass development, design process
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2003_m_097
id	cf2003_m_097
authors	FRÖST, Peter
year	2003
title	A Real Time 3D Environment for Collaborative Design
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 203-212
summary	By setting up collaborative design processes in architecture it is possible to considerably improve the integration of customer needs and ideas into the programming phase of a building project. Our design process includes active collaboration between customers, users and other stakeholders as well as the use of virtual environments in conceptual design. The output from the process is treated as visualised input to the architectural programming. The work presented focuses on developing digital tools to support this collaborative design dialogue. We have developed an extremely “easy to use” digital modelling tool called “ForeSite Designer”. The tool enables the users to build layouts of prefabricated components on a building site in 2D. This 2D layout can then instantly be exported to a lit-up real time 3D environment in the computer game “Half-Life.” ForeSite Designer has been used in a several design events with different settings. This paper presents the tool and one project where it was utilized. The results show that ForeSite Designer can promote dialogue and collaborative design work among the participants. We have also found that it is important how the virtual environment and its components are visually designed in order to support the dialogue and collaborative design work.
keywords	collaboration, customer, real time, virtual environment
series	CAAD Futures
last changed	2003/09/22 12:21

_id	avocaad_2003_21
id	avocaad_2003_21
authors	Jaroslaw Szewczyk
year	2003
title	Technology and Local Values; Computer – Aided Acting with Regional Heritage
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The problems of storage of local cultural heritage in digital databases, are reported in the paper. An exemplar case of RuralXML framework is presented. Three main groups of challenges relating to “culturally rich” databases are recognised:1. Estimation of the significance of digital databases for supporting design process, educational needs and scientific investigations;2. The conceptual problems with digital representation of “the paper heritage”3. The technical problems related to the architectural databases.The most important aspects of the problem are mentioned, as a background to a discussion about the reciprocal dependencies between technology and local values, i.e. how technology supports acting with the local architectural heritage, and how “cultural significance” values technology. We claim that digital technology not only enables storage and management of such data, but it also adds a new dimension to the design, making it “locally-sensitive” and oriented towards context by means of employing digitally archived architectural data. The accessibility to information about the “local” architecture heritage is important for local as well as global design. The premises for such statements, are presented.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	a54a
id	a54a
authors	M Kavakli and JS Gero
year	2003
title	DIFFERENCE BETWEEN EXPERT AND NOVICE DESIGNERS: AN EXPERIMENTAL STUD
source	Human Behaviour in Design, edited by U Lindemann, Springer, Berlin, pp 42-51.
summary	This chapter investigates the differences in performance between an expert and a novice in terms of their respective strategic knowledge. We examined conceptual design protocols of an expert and a novice, and found that the expert’s cognitive activity and productivity in the design process were almost three times as high as the novice's. The possible reason for this is the difference in their strategic knowledge. The expert’s cognitive processing is structured such that it stays within the limits of human short term memory. This provides empirical evidence for a different strategic knowledge that may be developed with experience. The expert's strategic knowledge allows him to use a smaller number of processes and to form different groupings of processes.
keywords	design cognition, strategic knowledge, experts, novices
type	normal paper
email
last changed	2004/04/10 01:43

_id	ecaade03_141_137_marques
id	ecaade03_141_137_marques
authors	Marques, S., Goulette, J.P. and Bonnal, D.
year	2003
title	Exploring design in cyberspace: a teaching experience
doi	https://doi.org/10.52842/conf.ecaade.2003.141
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 141-144
summary	The use and evolution of information and communication technologies (TIC) are changing human’s cultural, social, and material content. It regards not only the complexity of technology, but also the re-discussion of concepts concerning to several domains of knowledge, among them, architecture (theory, practice and teaching). The particular focus of this paper is to present an undergraduate teaching experience in a French School of Architecture (École d'Architecture de Toulouse). The course called FINC (“Forme, Information, Novation, Conception”), deals with new designers' attitudes exploring cyberspace. By concentrating on a critical approach of the ""reciprocal contamination"" between physical and virtual architecture, the aim of this course is to bring architectural students to face a new design experience: to explore the new cognitive and communicative environments of cyberspace, designing in a different conceptual and experimental environment.
keywords	Architecture; cyberspace; design; teaching
series	eCAADe
email
last changed	2022/06/07 07:59

_id	2004_292
id	2004_292
authors	Modeen, Thomas
year	2004
title	Using Solid Freeform Fabrication for the Conceptualization and Corporeal Actualization of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2004.292
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 292-301
summary	This paper forms an update to the paper presented ar eCAADe 2003, in Graz. It is a summary of a project which aim is to suggest an alternate methodology for utilizing additive Solid Freeform Fabrication (more commonly known as Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive SFF production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Whereas the paper in Graz introduced the conceptual foundations and the taxonomy of the project, the aim in this years paper is to present some of the realized designs and discuss, in brief, how what has been learnt could be furthered as the project proceeds. The three designs described in more detail in the paper, all catalyzed by a specific sensory notion, would have been very difficult, if not impossible, to fabricate by any other means than additive Solid Freeform Fabrication.
keywords	Architecture, Design, Solid Freefrom Fabrication, Senses
series	eCAADe
email
last changed	2022/06/07 07:58

_id	avocaad_2003_07
id	avocaad_2003_07
authors	Penttilä, Hannu
year	2003
title	Think Globally – Act Locally in Architectural Information Management
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper tries to describe the conceptual connection between the larger-scale, somewhat idealistic global visions and trends in the architectural-ICT-education, and on the other hand the smaller-scale real-life activities that are carried out in the local educational institutions.The local activities are demonstrated with a handful of case-study experiences from HUT/architecture.A proposal for the future, is to establish a continuous web-forum for architectural schools• To submit and maintain their organizational and educational data• To benchmark their education content with other schools• An early version is already available in:
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
type	normal paper
email
last changed	2009/06/04 07:04

_id	caadria2008_57_session6a_472
id	caadria2008_57_session6a_472
authors	Prats, S. Lim, M.; S. Chase, S. Garner
year	2008
title	Sketching in Design: Formalising a Transformational Process
doi	https://doi.org/10.52842/conf.caadria.2008.472
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 472-478
summary	The process of sketching can support the sort of transformational thinking that is seen as essential for the interpretation and reinterpretation of ideas in innovative design (Suwa 2003). In this paper, the initial outputs and findings of an ongoing project called Design Synthesis and Shape Generation are described based on experimental investigations of the mechanics of sketching from practicing architects and industrial designers as they responded to a series of conceptual design tasks. Preliminary analyses of the experimental data suggest that the interactions of designers with their sketches can be formalised according to a finite number of generalised shape rules. These rules formalise the transformations and reinterpretation of shapes for example through deformation or restructuring.
keywords	Sketching; Exploration; Computer supported design; Shape rule
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	cf2003_m_024
id	cf2003_m_024
authors	SEGERS, Nicole S. and de VRIES, Bauke
year	2003
title	The Idea Space System - Words as Handles to a Comprehensive Data Structure
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 31-40
summary	The Idea Space System is a CAAD system that supports an architect in the early phase of the design process, by reducing fixation in the process and enhancing the ‘flow’ of work. Mostly in the field of CAAD research, the emphasis lies on sketching or modelling. However the architect uses multiple representations in developing the design. In this research the focus lies on the use of words. The Idea Space System captures all design data and then uses the words to provide the architect with new associations and relations between words (real time), which stimulate the generation of new ideas. Architecture students have used our first prototype of the Idea Space System in a small experiment. This gave us better insight in the ideas and relations made by the architect in the early phase of the design process and what kind of feedback preferred. Afterwards a study was done about the representation of the feedback. In this paper we focus on the textual input provided by the architecture students and the description of the Idea Space System, handling this textual input and providing the architecture students with the proper feedback.
keywords	conceptual, information modelling, design thinking, text
series	CAAD Futures
email
last changed	2003/11/22 07:23

_id	caadria2003_a7-3
id	caadria2003_a7-3
authors	Zhou, Q.
year	2003
title	From CAD to iAD - A Prototype Simulation of the Internet-based Steel Construction Consulting for Architects
doi	https://doi.org/10.52842/conf.caadria.2003.919
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 919-936
summary	Information technology has become so powerful and interactive that what is conventionally called CAD might evolve into iAD (Internet Aided Design). For Internet applications in the AEC (Architecture, Engineering and Construction) industry, most of the efforts and applications have been concentrated on project management and collaboration, while in the area of design and engineering consulting, limited progress has been made. Even with some of this success, contemporary development has not changed the nature of the fragmentation of the AEC industry. Based on previous research surveys (Zhou & Krawczyk 2001) of the development of Internet applications in the AEC industry and the proposal of a conceptual model of Internet-based engineering consulting in architecture, this research will apply these theories and concepts into a specified area of steel construction consulting for architects. The first phase of this research will define the content and scope of steel construction consulting and the potential Internet application. Second, a proposed solid working model is developed covering organizational structure, user network, services provided and technology. In the third phase (as this paper presented), a prototype simulation is used to apply the concepts and methodology in a preliminary design application to demonstrate how this Internet-based consulting model would work.
series	CAADRIA
last changed	2022/06/07 07:57

For more results click below: