Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 508

Reformat results as: short short into frame detailed detailed into frame

_id	acadia03_041
id	acadia03_041
authors	Lee, Ming-Chun and Do, Ellen Yi-Luen
year	2003
title	SpaceMaker - Creating Space by Sketching It
doi	https://doi.org/10.52842/conf.acadia.2003.311
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 311-323
summary	Creating space is the essence of architectural design. Architects actually work with three-dimensional (3-D) space, although two-dimensional (2-D) drawings are perhaps the most commonly used design medium. It is thus valuable to help architects truly see 3-D space, while making drawings in 2-D. In addition, architects usually use symbols in their drawings to identify architectural concepts. By recognizing the symbols, it is possible to identify architectural configurations of the design. This paper introduces a symbol-based modeling tool—SpaceMaker—that allows architects to make freehand floor plans and apply symbols to identify different functional spaces. SpaceMaker then converts those floor plans into 3-D models according to the symbols.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	avocaad_2003_09
id	avocaad_2003_09
authors	Alexander Asanowicz
year	2003
title	Form Follows Media - Experiences of Bialystok School of Architectural Composition
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper considers transition from physical modelling to digital methods of the creation of architectural forms. Every type of creation has constructed the proper means of expression and its own methodology. The main thesis of this paper is that a specific character of the composition activity of an architect is determined by the modelling methods. As the research on architectural modelling, the two methods of creating spatial architectural forms (cardboard model and computer model) have been compared. Research has been done on the basis of the same exercise for both media. The process of creation proceeded in the same way, too. As the start point students have found the inspiration. Each student presented photos of existing architectural objects and a text, which explained the reasons of the choice. Next steps were sketches of the idea and realisation of the model. The achieved results of creative activity fully confirm the thesis of the research.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2003_c3-4
id	caadria2003_c3-4
authors	Maneesatid, Preecha and Szalapaj, Peter
year	2003
title	The Role of CAD in Environmental Building Science
doi	https://doi.org/10.52842/conf.caadria.2003.487
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 487-502
summary	The fundamental requirement of all building design is the provision of shelter from the external climate and, if possible, the modification of environmental factors generated by this climate to create an internal environment suitable for human comfort. The environmental design strategies of modifying climate derive from the requirements of creating human comfort in buildings, using the elements of the natural climate which vary throughout the year depending upon the prevailing climatic conditions. Environmental Building Science (EBS) research and practice has investigated various techniques to increase architects' performance in environmental building design. These technical design options are also available to architects to take advantage of the external environment. Most environmental design techniques rely on convectional forms of passive environmental design, and building material and system. But it hardly begins to address the more complex demands of environmental building design issues in the buildings. Particularly, testing environmental design techniques against physical models requires much input data which is not available in the early design stages, and is time consuming to use. This forces architects to work with many design parameters that are not compatible with their activities. It is consequently difficult to observe the interrelation of design techniques with design development. The most important role of Computer Aided Design (CAD) is to integrate wider varieties of input data requirements, modelling with EBS properties, output representations with EBS knowledge and assistance tools for optimisation tasks in environmental design issues.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2003_c4-2
id	caadria2003_c4-2
authors	Wittkopf, Stephen K. and E-Jin, Foo
year	2003
title	Challenges of Using Image-Based Modeling Tool within the Architectural Design Process
doi	https://doi.org/10.52842/conf.caadria.2003.597
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 597-612
summary	Architects and planners will increasingly have to deal with developments in urban sites where existing context is a critical part of their design considerations. It is therefore important that architects can envision the potential of emerging technologies as means to assist architectural design in the changing face of our build environment. The objective of this paper is to examine the opportunities which image-based modeling (IM) can offer to the architectural design in a context -rich urban built-environment by providing better means of representation of the design context. By drawing relations from the available precedents and the research findings, the paper provides insights into how IM application can create stronger visual awareness of the context, in order to assist design within such condition. This paper shows that the reliability of the IM models in terms of geometric accuracy and rendering quality decreases as the physical scale of the subject increases. The best result is generated from modeling small objects in studio environment as compare to creating larger architectural objects in exterior conditions.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2003_a3-4
id	caadria2003_a3-4
authors	Wu, Yen-Liang
year	2003
title	A Digital Modeling Environment Creating Physical Characteristics
doi	https://doi.org/10.52842/conf.caadria.2003.385
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 385-396
summary	Computer media develop progressively day by day. In the process of designing architecture, the employment of digital model seems to become more significant while the traditional physical model have still been used. However, the physical model had some unique characteristics which digital one has not. And those characteristics were what we intended to discover and put into the digital modeling environment developed by us.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_033
id	acadia03_033
authors	Ceccato, Cristiano
year	2003
title	From Emergence of Form to the Forming of Logic
doi	https://doi.org/10.52842/conf.acadia.2003.254
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 254-255
summary	Driven by digital design tools and production methods, the interplay of theory and practice in architecture is converging on the notion of process. Process definition and process tools are now an essential part of design, design development, fabrication and construction. The word process itself can be interpreted in different ways, as being deterministic or non-deterministic. Computer programming can be understood as a design process and a structuring mechanism. Rather than making finite designs (products), architects are beginning to understand their roles as toolmakers, developing algorithmic processes that incorporate constraints and intents into software / procedures / programming. New methodologies such as parametric-associative design hierarchies are a clear example of semantic design structuring (a form of grammatical ordering); the creation of hierarchical parametric models can be understood as a form of visual programming. In a deterministic sense, it can be argued that if a process is correct and critical, then by definition so will be the product.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia03_010
id	acadia03_010
authors	Kilian, Axel
year	2003
title	Fabrication of Partially Double-Curved Surfaces out of Flat Sheet Material Through a 3D Puzzle Approach
doi	https://doi.org/10.52842/conf.acadia.2003.075
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 75-83
summary	The topic of this paper is the connection of digital modeling with generative programming and rapid prototyping, to produce physical sketch surface models. The physical surface models are assembled out of developable strips connected through a puzzle-like detail. The use of programming as a design approach allows the generation of connection details that corresponds to the rules of flat sheet rapid prototyping techniques of laser cutting and water jet cutting. With numerically controlled cutting, there is no need to keep the joint detail related to manually achievable forms or to apply a standardized dimension. This paper demonstrates the possibilities of programming to generate cutting geometries that adapt to the local surface properties. The larger perspective of the research approach is the question of how to formulate and capture design intention through programming. What influence does the use of generative modeling in combination with rapid prototyping have on the design language of physical objects?
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia03_005
id	acadia03_005
authors	Maher, Andrew and Burry, Mark
year	2003
title	The Parametric Bridge: Connecting Digital Design Techniques in Architecture And Engineering
doi	https://doi.org/10.52842/conf.acadia.2003.039
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 39-47
summary	New design opportunities that are facilitated by cross-disciplinary collaboration in both practice and research are available through the use of high level design software that simultaneously offers real time access to both analysis and design geometry in shared three-dimensional digital models. Here we present a collaborative research project between architects and structural engineers for the design of a pedestrian bridge, conceived to test current digital design processes in architectural and structural engineering practice with those in research through the use of models of parametrically defined associative geometry. In this project, the digital model’s architectural design geometry was constrained by the bridge’s fabrication methods and linked with its engineering analysis. Iterations of the design geometry were then optimised or ‘solved’ to produce variations according to the design parameters offered up for change. The shift of the professions from the plane to digital space exposes the possibilities of new design techniques with the exchange of design parameters potentially operating as a digital dialogue between the disciplines—a kind of digital version of Antoni Gaudi’s funicular hanging model—a metaphor of the digital space that has been developed for this project.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	avocaad_2003_11
id	avocaad_2003_11
authors	Michael Cumming
year	2003
title	The promise of peer-to-peer computing versus the utility of centralised data models in collaborative design
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Peer-to-peer (P2P), or distributed computing, involves having computers on a net¬work -peers- acting as both suppliers, as well as consumers of information. With recent developments, most notably the JXTA initiative by Sun Microsystems, such P2P technology will soon become quite easy to implement, in a standardised and secure fashion. P2P technology holds promise in the domain of collaborative design in that it allows design collaborators to exchange information in a manner that appears to have certain advantages over centralised systems, such as greater spontaneity, the ability to self-organize, better scalability, and the ability to handle transient resources in a more robust manner. However, it is not clear how this new technology can be applied to the information needs of collaborative design, in which centralised data models are usually seen as useful. This paper examines some of the positive and negative implications of this new technology in the context of collaborative design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	acadia03_031
id	acadia03_031
authors	Paolo Fiamma
year	2003
title	Architectural Design and Digital Paradigm: from Renaissance Models to Digital Architecture
doi	https://doi.org/10.52842/conf.acadia.2003.247
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 247-253
summary	Means of expression have always affected our ways of thinking. Designers, who have to interpret signs, languages, and evolution in order to translate into an organised “form” the recurring problems and values of mankind, have left thoughts, projects and wishes to the study of representational techniques. In this way, they have also disclosed a unique view of reality and at the same time a “way of being” towards the meaning of design itself. In the relationship between architecture and representational techniques, Brunelleschi said that “perspicere” was no longer just the science of optics, but also the science that contained the lines of research on geometry and shape that he was the first to exploit in design. Centuries later, in the axonometric representation advocated by De Stijl and intended for factories and industries, the object, shown in all its parts, easy to reconstruct even in the space to which it referred, revealed with extreme clarity the mass-production building and assembly materials and systems. Digital representational media make a great entrance in the heuristic process, invalidate all signs, and promote its quality. The result is an ever-changing, computerised architecture, dominated by curvilinear, wavy shapes that flow from a generative process made of the deformations, additions, and interference of different volumes.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	sigradi2003_095
id	sigradi2003_095
authors	Petric, Jelena and Maver, Tom
year	2003
title	Digital Prototyping in the Architectural Design Studio
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper describes the inter-related use of three digital prototyping technologies by undergraduate students in the Department of Architecture and Building Science at the University of Strathclyde. These are: virtual reality computer graphics (CG), rapid manufacture (RM) of physical scale models from digital data, and acquisition of digital data relating to the shape of a physical object by some form of laser scanning (LS). The paper describes two experiments - one relating to housing, the other to a transport museum - to determine how seamlessly, accurately and usefully the (student) architect can move from one technology to another in the course of design.
keywords	Computer graphics, rapid manufacture, laser scanning
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia03_028
id	acadia03_028
authors	Shih, Chien-Hung
year	2003
title	To Proceed Analysis of Dynamic Virtual Environment by Using Physical Model as a Protagonist
doi	https://doi.org/10.52842/conf.acadia.2003.219
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 219-225
summary	This paper intends to combine architecture with state-of-the-art software technologies and operational methods of other domains to free architectural rendering from the restrictions of cold, still graphics or unrealistic computer pictures. The author transforms physical models into digital models through industrial design software, and synthesizes these digital models into motion pictures of the environment via film production software. This way, a designer can effectively turn the ideas of his mind into rough handmade models, instead of spending enormous amounts of time building computer models, and viewers will be able to quickly grasp the conditions of the site through the motion pictures.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia03_009
id	acadia03_009
authors	Shih, Naai-Jung
year	2003
title	Digital Architecture - What Would 6000 Points Turn Out To Be?
doi	https://doi.org/10.52842/conf.acadia.2003.067
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 67-73
summary	This paper presents students’ fulfillment of an assignment that explored the concepts of digital architecture using rapid prototyping (RP) process. A point cloud was given to students, and different representational data were substantiated as real 3D physical models. The presence of RP models and the sequential illustration of working steps in their reports revealed that the control of shapes often differed from what students perceived in VR worlds. The results thus confirm that physical models are useful for visualization as well as in design pedagogy.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade03_269_43_achten
id	ecaade03_269_43_achten
authors	Achten, Henri and Joosen, Gijs
year	2003
title	The Digital Design Process - Reflections on a Single Design Case
doi	https://doi.org/10.52842/conf.ecaade.2003.269
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 269-274
summary	CAD tools are increasing their expressive and geometric power to enable a design process in which the computer model can be used throughout the whole design process for realizing the design. Such a process, in which other media such as physical scale models or drawings are no longer required by necessity to facilitate the design process, can be considered a digital design process. Rather than proposing that such a process is ideal – drawings and scale models should not be discarded – we feel that when taken as a starting point, the digital design process raises a number of new challenges to architectural design that deserve attention. These challenges concern the basic activities in design: exploration of the problem space, creating preliminary solutions, understanding consequences of design decisions, and so forth. In this paper we take the concrete design case of a graduation project that was developed from the start solely in CAD. We identify a number of key issues in that process such as continuous modeling, the model as design, continuous pliability, localized focus, and postponed decision. These issues not only have a technical, CAD-related aspect, but also are connected to architectural design. Most of these aspects are subject of contemporary debate in architectural design. On this basis, we can indicate where CAD is making a potential difference in architectural design.
keywords	Digital design, CAAD
series	eCAADe
email
more	http://www.ds.arch.tue.nl/General/Staff/henri
last changed	2022/06/07 07:54

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

For more results click below: