Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 568

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	heyhlighenijdc2003
id	HeyhlighenIJDC2003
authors	Heylighen, Ann and Segers, Nicole
year	2003
title	Look Who's Suggesting
source	International Journal of Design Computing, 2003, Volume 6
summary	During design architects do not only sketch, they combine different kinds of information and representations. The combination of text, image, sketch and/or draft can provoke new associations that keep the design process going. The sketchbook presented here enables architects to use all representations simultaneously, so as to fully exploit their cross-fertilisation. More importantly, it steadily makes suggestions for continuing development of design ideas. These suggestions can take the form of words that are semantically related to the users’ ideas, or of images showing how other architects have developed related ideas into built artefacts. To this end, the sketchbook captures all information the architect/user puts ‘on paper’ and forwards it to a design idea recorder/interpreter called Idea Space System (ISS). In trying to understand the user’s ideas, ISS places all elements captured into a gigantic network, as if part of the frame of reference is made explicit. In the network nodes are words, sketches or images, while links represent relations of various origins. The semantic relations that ISS identifies are shown to the user. At the same time, words are processed as search criteria in DYNAMO, a growing architectural case base, to detect and display design projects that exemplify related ideas. Through the explicit links between early ideas and concrete design cases, the sketchbook acts as a permanent source of inspiration, while stimulating both architects’ creativity and their awareness of the downstream implications of design ideas.
series	journal paper
email
more	http://www.arch.usyd.edu.au/kcdc/journal/vol6/
last changed	2004/03/25 17:51

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade03_199_196_gatermann
id	ecaade03_199_196_gatermann
authors	Gatermann, Harald and Czerner, Juergen
year	2003
title	Modular E-Learning-Environment for Architecture
doi	https://doi.org/10.52842/conf.ecaade.2003.199
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 199-202
summary	IMLAB (Interdisciplinary Modular Learning System for Architecture and Building Science) is a project, startet by three schools of architecture in Germany: a modular, digital and online-based system, which has the aim to collect and improve teaching elements from architectural schools around the world. The development of digital teaching materials at every single university is very expensive - so the idea is to motivate schools all over the world to contribute their teaching materials and teaching moduls. It could work like an architectural ""napster"". The initial development of this kind of teaching community was funded by the German Federal Ministry of Research as a research project. The momentary state of work is documentated on the following website: www.imlab.de. Unfortunately all the information is in German up to now - we will develop the english version as soon as possible. We do have interactive workshops and design-projects beetween different universities up to now (in Germany) and several contacts to international partners. We would like to use eCAADe 2003 as a platform for multiplying this idea and finding more partners from all over the World.
keywords	e-learning, modular, synchronous, asynchronous, knowledge-base
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	heylighen_ds2003
id	Heylighen DS2003
authors	Heylighen , Ann and Verstijnen, Ilse M.
year	2003
title	Close encounters of the architectural kind
source	Design Studies, Volume 24, Issue 4, 2003, pp. 313-326
summary	Throughout their career architects collect an extensive record of architectural cases, which they use as a source of inspiration and knowledge during design. Being novices, student architects do not yet have such a record. In order to compensate for this lack of knowledge, teachers in architecture engage their students into realistic yet simulated projects and introduce them to relevant architectural precedents for these projects. Within the realm of AI, case-based reasoning (CBR) stresses the importance of cases too. So far, however, applications that flow from CBR research have rarely found their way into architecture. The experiment that is reported in this article examines the conditions under which CBR technology can be useful in architectural education. The results show that in order for students to benefit from this technology, it should supply cases that are closely related to the project at hand. These results are consistent with psychological theories of knowledge representation in novices.
keywords	case-based reasoning; design education; analogical reasoning
series	journal paper
email
last changed	2004/03/25 17:57

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2206
id	2206
authors	Kvan, Thomas
year	2004
title	REASONS TO STOP TEACHING CAAD
source	Mao-Lin Chiu (ed), Digital design education, Garden City Publishing, Taipei 2003, ISBN 9867705203
summary	Computers are a problem. They are expensive, even if the prices have dropped dramatically and promise to continue dropping. They do not look after themselves but demand considerable attention – we have to hire computer specialists to ensure they talk to each other, staff are required to make sure software is installed and to fix things when it no longer works. Learning to use them is tedious; skills have to be developed to master several idiosyncratic software systems. The hardware and software regularly malfunction. It is faster to draw a line by hand than with software. Students already have enough trouble learning how to stop a window leaking or ensure a fire escape route will protect people in time of trouble, why make them learn all these other things. We should stop teaching CAAD. Although technological and economic issues are very real and not to be dismissed lightly, the real problems of teaching CAAD are not these. The real issues we need to address is how we teach and, behind that, why we teach. This paper explores the what and why.
keywords	pedagogy
series	other
type	normal paper
email
last changed	2004/09/27 07:10

_id	acadia03_041
id	acadia03_041
authors	Lee, Ming-Chun and Do, Ellen Yi-Luen
year	2003
title	SpaceMaker - Creating Space by Sketching It
doi	https://doi.org/10.52842/conf.acadia.2003.311
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 311-323
summary	Creating space is the essence of architectural design. Architects actually work with three-dimensional (3-D) space, although two-dimensional (2-D) drawings are perhaps the most commonly used design medium. It is thus valuable to help architects truly see 3-D space, while making drawings in 2-D. In addition, architects usually use symbols in their drawings to identify architectural concepts. By recognizing the symbols, it is possible to identify architectural configurations of the design. This paper introduces a symbol-based modeling tool—SpaceMaker—that allows architects to make freehand floor plans and apply symbols to identify different functional spaces. SpaceMaker then converts those floor plans into 3-D models according to the symbols.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	64c0
id	64c0
authors	Pektas, S T
year	2003
title	A FRAMEWORK FOR BUILDING DESIGN PROCESS MODELING WITH PARAMETER-BASED DESIGN STRUCTURE MATRICES
source	In C. J. Anumba (Ed.), Innovative Developments in Architecture, Engineering, and Construction. (pp. 25-31). Rotterdam: MillPress
summary	Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is utmost important. While the knowledge needed for building processes are distributed among the different participants from diverse disciplinary backgrounds, the product of their activities, i.e. the building itself, must be highly integrated. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Furthermore, most of the current process modeling tools in the AEC industry do not enable analyses of iteration in the process and they represent the process at high levels with very little information at lower levels. In order to resolve the issues mentioned above, this paper introduces the use of parameter-based dependency structure matrix as a process modeling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. A knowledge management framework for parameter-based DSM applications is proposed and the application of the framework is demonstrated through a real life building design problem.
keywords	Design Integration, Design Process Modeling, Information Flow, and Parameter-based Dependency Structure Matrix
series	other
type	normal paper
email
last changed	2005/12/01 15:52

_id	cf2003_m_026
id	cf2003_m_026
authors	WYELD, Theodor G.
year	2003
title	An Object Server System for 3D Digital Design Collaboration
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 235-248
summary	Moving through and between computer generated 3D objects we experience a 'virtual world'. Virtual Worlds have created a dream-like landscape. They also have facilitated a paradigm shift for architects working with CAD tools where they now desire to “design three-dimensional spaces in an immersed way” (Strehlke and Engeli 2001). Architects are already working in computer-moderated collaborative networked organisations. A 3D Virtual World offers a different kind of collaboration. To understand how architects might design in an 'immersed way', three experiments are described. The experiments attempt to investigate how participants experience the 3D spaces within which they collaborated. In particular, the last experiment makes use of 'shared objects' in the scene. The software chosen to create these Virtual Worlds was VRML and JAVA due to their flexibility and rapid prototyping. Where VRML differs from most CAD languages is in its openness. This paper describes an object sharing client-server architecture based on a simple multi-user system providing navigation in CosmoPlayer 2.11 ported through Netscape. The Object Server System allows multiple clients, as avatars, and objects to be manipulated in a 3D Virtual World. The system updates the transforms of the objects explicitly allowing their transform values to be shared across multiple browser sessions.
keywords	collaboration, multi-user, object sharing
series	CAAD Futures
last changed	2003/09/22 12:21

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	acadia03_002
id	acadia03_002
authors	Anders, Peter
year	2003
title	Four Degrees Of Freedom
doi	https://doi.org/10.52842/conf.acadia.2003.x.s7a
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 17
summary	Letting go is hard to do. Remember back to when, after months of trying, you let go of the handlebars of your bicycle and sailed down the street, effortless and assured. It was a freedom born of mastery, balance and technique. You had let go, but were in control. Technique extends to other devices as well and we are here to discuss architectural computation. Here too, as we will see, mastery is shown by letting go. These papers explore new degrees of freedom in design computation. Each is on a separate aspect of architecture, whether it be aesthetics, process, or structure. Two papers inquire into the entities of design and the processes by which they are manifested. They pose important questions. If we can affect the course of design going forward, are we free to change its past? By defining the characteristics of objects at the outset, are we through automation free to choose from a refined spectrum of outcomes? From the evidence of these papers, the answer to both questions is yes. Through the agency of parametric design we can affect the future and past of architectural processes and their products. Rather than being locked into rigid, linear decisions we are temporally free to choose, tweak and modify. Choice and chance play an important role in aesthetics as well. This has become emblematic of design trends as we have seen in recent years. One of our papers addresses the indeterminacy of particle systems in the design of a monument to the victims of 9/11. By letting go of the handlebars of the computer, the author has been freed to new, poetic forms and processes. Another paper opens urban design to its client community by use of a sophisticated web site. In the tradition of populist innovators like Charles Moore and Lucien Kroll, the authors have extended the design process beyond the office walls to the city itself. The designers, by loosening their grip on the project have made the effort democratic and participatory. Intriguingly, at the end of the paper, they note that this use of cyberspace opens the door to a non-physical architecture. Could architecture, then, let go its materialist biases as well? We hope to engage this and other questions shortly.We are pleased then, to share with you these insights and projects. Wassim and I hope that these presentations will be as liberating for you as they were for us.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	sigradi2003_043
id	sigradi2003_043
authors	Bianchi, N., Montelpare, A. and Soboleosky, L.
year	2003
title	El aprendizaje inicial del proceso proyectual (The initial learning of the design process)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The act of design using the graphic language is esential to the organization and determination of the process. Introducing digital tools modifies the design project research. Its application faces the traditional experience and encourages different demands conceptually and operatively. We wonder if the use of digital media, from the very beginning, is possible or pupils must have trainning in the use of conventional graphic in order to be meaningfull. Our proposition is to include digital technology from the beginnitng of the teaching process, in order to explore the potencial of each mode and promoving to learn the normative background.
keywords	Initial learning design, analog and digital modes
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2003_072
id	sigradi2003_072
authors	Braga, Gisele Pinna
year	2003
title	O modelo digital auxilia a compreensão do desenho arquitetônico ou o desenho arquitetônico auxilia a compreensão do modelo digital (The digital model assists the understanding of the architectural design or the architectural design assists the understanding of the digital models)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In order to design architecture projects, 1st grade architecture students have to understand the space and how to figure it out. To be succeeded in the design process it is necessary to develop their spatial abstraction capability. Each architectural representation tool can contribute for this development. This work shows the pedagogical experience applied to students of the first grade of architecture course at UNICENP, in Curitiba, Brazil, approaching the strategies of different subjects to increase the development of spatial skills using different architecture design tools.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia03_033
id	acadia03_033
authors	Ceccato, Cristiano
year	2003
title	From Emergence of Form to the Forming of Logic
doi	https://doi.org/10.52842/conf.acadia.2003.254
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 254-255
summary	Driven by digital design tools and production methods, the interplay of theory and practice in architecture is converging on the notion of process. Process definition and process tools are now an essential part of design, design development, fabrication and construction. The word process itself can be interpreted in different ways, as being deterministic or non-deterministic. Computer programming can be understood as a design process and a structuring mechanism. Rather than making finite designs (products), architects are beginning to understand their roles as toolmakers, developing algorithmic processes that incorporate constraints and intents into software / procedures / programming. New methodologies such as parametric-associative design hierarchies are a clear example of semantic design structuring (a form of grammatical ordering); the creation of hierarchical parametric models can be understood as a form of visual programming. In a deterministic sense, it can be argued that if a process is correct and critical, then by definition so will be the product.
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: