Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 18 of 18

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2003_020
id	sigradi2003_020
authors	Abarca, R., Díaz, S. and Moreno, S.
year	2003
title	Desarrollo de material informatico-educativo para la enseñanza de la geometría a estudiantes de diseño (Development of IT-based educational material for the teaching of geometry to students of design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper is born as an answer to the meaningful learning difficulties and academic performance in Spatial and Flat Geometry course on second year Design School at Universidad de las Americas University, Santiago de Chile. The problem is faced from the potentiality that digital environment gives us in representation, display options, shape and projection testing, analysis and non visual accounts to teach flat and spatial geometry within the receptors' codes and coherent with designer's own language.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia03_037
id	acadia03_037
authors	Anders, Peter
year	2003
title	Cynergies: Technologies that Hybridize Physical and Cyberspaces
doi	https://doi.org/10.52842/conf.acadia.2003.289
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 289-297
summary	This paper presents ways in which cybrids depend for their technology upon three existing models of architectural hybrid: display space, environmental computing, and augmented/mixed reality. Cybrids bring these techniques together into a synergistic whole that depends as much on the observer for its consistency as it does on its comprising technologies. This synergy is a product of corroborative behavior between different modes, which provide cybrid users with a coherent social/spatial experience. The paper notes cybrids’ similarity to theater, not only for their technological dependency, but also for the tacit yet vital role of the observer in their effect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2003_047
id	sigradi2003_047
authors	Baccaglio, S., Brebbia, V. Bueno, R., Lagorio, L., Noya, A., Salgado, M., Rucq, M. and Pons, A.
year	2003
title	Una Herramienta Alternativa Para La Comunicación Académica (An Alternative Tool for the Academic Communication)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The aim of this report is to develop a digital pattern easy to use, which will be a suitable tool to display images and texts for academic purposes. The proposal is done through the configuration of a html code page. Besides the study proposes to carry out a digital catalog in order to make easy the files and communication of graphic and photographic documentation. The case of some urban transformations in Rosario's riverside sets an example of its use and verifies its potential condition.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia03_044
id	acadia03_044
authors	Bermúdez, Julio and Foresti, Stefano
year	2003
title	Information Visualization
doi	https://doi.org/10.52842/conf.acadia.2003.x.p5s
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 346
summary	Digital visualization addresses representational challenges from within and without architecture. ‘Disciplinary’ digital visualization is used to explore, understand and communicate architectural information associated with the production of buildings. 3D modeling, rendering, animation and VR as well as the power of digital media to permit the seamless integration of various data types are unleashing completely new ways to display architecture. As digital power continues to increase and get cheaper, portability and wi-fi networks take root, and visualization work becomes even more main stream, we can expect growing changes in the way the design process is conducted, buildings are presented and documented, and the public and 3rd party’s demands from professional services. This demands a more conscious research/pedagogies aimed at developing new representation conventions.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	43f0
id	43f0
authors	Flynn, D., van Schaik, P., Blackman, T., Fencott, P.C., Hobbs, B., & Calderon, C.
year	2003
title	DEVELOPING A VIRTUAL REALITY-BASED METHODOLOGY FOR PEOPLE WITH DEMENTIA: A FEASIBILITY STUDY.
source	Journal of CyberPsychology and Behavior, Vol6, Number6, 2003.
summary	The aim of this study was to examine the feasibility of virtual reality (VR) technology for use by persons with dementia (PWD). Data were obtained directly from six PWD regarding their experiences with a virtual environment (VE) of a large outdoor park. A user-centered method was developed to assess: (a) presence; (b) user inputs; (c) display quality; (d) simulation fidelity; and (e) overall system usability. The extent to which PWD could perform four functional activities in the VE was also investigated (e.g., mailing a letter). In addition, physical and psychological well-being of PWD while interacting with the VE was assessed objectively by recording heart rate during the VR sessions and subjectively with discrete questionnaire items and real-time prompts. Symptom profiles associated with simulator sickness were assessed with an adapted version of the Simulator Sickness Questionnaire. The study found that PWD to some extent experienced presence; perceived that objects were realistic and moved naturally; generally felt in control of the interaction; and demonstrated little difficulty using a joystick for navigation. The study also demonstrated that VR is an appropriate medium for assessing functional behavior within the context of an ecologically valid VE. PWD did not experience any significant increase in symptoms associated with simulator sickness, or detriments to their psychological and physical well-being. These findings demonstrated that it is feasible to work in VEs with PWD.
keywords	Dementia, VR
series	journal paper
type	normal paper
email
last changed	2005/12/02 11:36

_id	heyhlighenijdc2003
id	HeyhlighenIJDC2003
authors	Heylighen, Ann and Segers, Nicole
year	2003
title	Look Who's Suggesting
source	International Journal of Design Computing, 2003, Volume 6
summary	During design architects do not only sketch, they combine different kinds of information and representations. The combination of text, image, sketch and/or draft can provoke new associations that keep the design process going. The sketchbook presented here enables architects to use all representations simultaneously, so as to fully exploit their cross-fertilisation. More importantly, it steadily makes suggestions for continuing development of design ideas. These suggestions can take the form of words that are semantically related to the users’ ideas, or of images showing how other architects have developed related ideas into built artefacts. To this end, the sketchbook captures all information the architect/user puts ‘on paper’ and forwards it to a design idea recorder/interpreter called Idea Space System (ISS). In trying to understand the user’s ideas, ISS places all elements captured into a gigantic network, as if part of the frame of reference is made explicit. In the network nodes are words, sketches or images, while links represent relations of various origins. The semantic relations that ISS identifies are shown to the user. At the same time, words are processed as search criteria in DYNAMO, a growing architectural case base, to detect and display design projects that exemplify related ideas. Through the explicit links between early ideas and concrete design cases, the sketchbook acts as a permanent source of inspiration, while stimulating both architects’ creativity and their awareness of the downstream implications of design ideas.
series	journal paper
email
more	http://www.arch.usyd.edu.au/kcdc/journal/vol6/
last changed	2004/03/25 17:51

_id	ijac20031108
id	ijac20031108
authors	Hirschberg, Urs
year	2003
title	Transparency In Information Architecture: Enabling Large Scale Creative Collaboration in Architectural Education over the Internet
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper is about networked collaboration in architectural education and about information architecture for networked collaborations. It presents results of a quantitative process analysis of two types of courses in Computer Aided Architectural Design that were taught using database-driven online environments. The main focus of the quantitative analysis is the performance of these online environments as information structures, designed to accommodate the presentation and the peer-to-peer exchange of design information for relatively large groups of between 60 and 150 participants. Using the database records to reconstruct the processes, three different quantitative analyses are described.Their results indicate that for these projects the web-environments were successful in enhancing peer-to-peer learning and that they promoted a more objective assessment of the submitted works. The study also looks at the effect that the environments themselves had on the process. Finally it draws some conclusions about these environments' information architecture: it presents tentative guidelines about how such environments must be designed to handle the dynamic display of design data, from many different authors, in a way that is transparent to the users.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2003_b6-1
id	caadria2003_b6-1
authors	Howe, A.S., Kang, P. and Nasari, Omid
year	2003
title	Digiosk Digital Design to Robotic Deployment in Two Months
doi	https://doi.org/10.52842/conf.caadria.2003.811
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 811-826
summary	In this paper, we discuss Kit-of-parts Theory and how it applies to the design, manufacture, and operation of a small robotic deployable demonstration structure called the Digiosk (Howe, 2001). "Kit-of-parts Theory" refers to the study and application of objectoriented building techniques, where building components are predesigned / pre-engineered / pre-fabricated for inclusion in joint-based (linear element), panel-based (planar element), module-based (solid element), and deployable (time element) construction systems. The Digiosk is an exposition display kiosk that was designed and manufactured digitally, and brought from concept to robotic functionality in a short period of time. Using kinematic mechanisms the cylinder opens up and deploys into a 2.7m cubical display booth complete with integral power and network connections. The kiosk was designed using a solid modeler, from which data was extracted to drive digital manufacturing processes. Owing to the well-developed understanding of Kit-of-parts Theory and the new "kinematic architecture" principles, the paperless process yielded a working prototype only eight weeks after initial conceptualization. The paper concludes with a discussion of how these concepts can be applied to large-scale projects and design processes.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2003_b7-3
id	caadria2003_b7-3
authors	Ma, Y.-P., Lee, C.-H. and Jeng, T.
year	2003
title	Inavigator: A Spatially-Aware Tangible Interface for Interactive 3D Visualization
doi	https://doi.org/10.52842/conf.caadria.2003.963
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 963-974
summary	The purpose of this work is to design a spatially-aware tangible interface for interactive 3D visualization. We explore an integrated platform whereby digital representations are integrated with physical artifacts. Our work provides a means to display separated perspective views of a design on multiple-projection physical planes. Users can directly interact with the physical planes to view digital information. By coupling physical artifacts with digital representations, the view of 3D information is mapped to physical space. Our work reduces the cognitive load on novice designers, and enhances the user's capability of understanding the relationships between multiple design representations.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ijac20031209
id	ijac20031209
authors	Otto, George; Kalisperis, Loukas N.; Gundrum, Jack; Muramoto, Katsuhiko; Burris, Gavin; Masters, Ray; Slobounov, Elena; Heilman, Jami; Agarwala, Vijay
year	2003
title	The VR-Desktop: an Accessible Approach to VR Environments in Teaching and Research
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	The VR-Desktop initiative is an effort to bring key benefits of projection-based virtual reality into the mainstream of teaching and research at the Pennsylvania State University, through the deployment of comparatively low cost and easy to use virtual reality and integrated multimedia display systems within a variety of contexts. Recent experiences with design and implementation of single- and multi-screen VR systems for teaching and research are described. The systems discussed employ low cost and readily available hardware components, familiar desktop computing environments, and open-source VR development toolkits. The approach is modular and easily adaptable to various applications in research or instruction.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ijac20031403
id	ijac20031403
authors	Schnabel, Marc A.; Kvan, Thomas
year	2003
title	Spatial Understanding in Immersive Virtual Environments
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	In this study, we examined the perception and understanding of spatial volumes within immersive and non-immersive virtual environments by comparison with representation using conventional media. We examined the relative effectiveness of these conditions in enabling the translation to a tangible representation, through a series of design experiments. Students experienced, assessed, and analysed spatial relationships of volumes and spaces and subsequently constructed real models of these spaces. The goal of our study is to identify how designers perceive space in Virtual Environments (VEs). We explore issues of quality, accuracy and understanding of reconstructing architectural space and forms. By comparison of the same spatial performance task undertaken within a Head Mounted Display, screen-based and real 2D environment, we are able to draw some conclusions about spatial understanding in immersive VE activity.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia04_046
id	acadia04_046
authors	Timberlake, James
year	2004
title	SmartWrap Pavilion
doi	https://doi.org/10.52842/conf.acadia.2004.046
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 46-49
summary	The combination of new materials and digital design has a transformative potential, providing building products and architecture tailored specifically to the clients’ needs and site requirements. This is the essence of the architecture of mass costumisation or personalised production. How can one demonstrate this physically when in essence the product is significantly ahead of current production capabilities? This was the dilemma faced by architects James Timberlake and Stephen Kieran of KieranTimberlake Associates, when asked to design a pavilion for the Cooper-Hewitt National Design Museum in the autumn of 2003. Their response is the SmartWrap Pavilion. The SmartWrap concept will deliver shelter, climate control, lighting, information display and power with a printed and layered polymer composite. The aluminium-framed pavilion is clad in a printed skin based on a combination of polyester and its derivative polyethylene terephthalate (PET), which was developed with DuPont. The pavilion was designed using a single project model, and all the aluminium extrusions of the frame were barcoded. This coding defined their structural and construction properties.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:56

_id	caadria2003_a7-1
id	caadria2003_a7-1
authors	Chantawit, D. and Hadikusumo, B.H.W.
year	2003
title	Integrated 4d Cad and Construction Safety Planning Information for a Better Safety Management
doi	https://doi.org/10.52842/conf.caadria.2003.891
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 891-904
summary	Safety is an important element of project successes. In the conventional project management, safety planning, as a function, is separated from other functions, such as planning/scheduling function. This separation creates difficulties for engineers to analyze what, when, why and where a safety measure is needed to prevent accidents in a construction activity. Another problem occurs due to the conventional practice of representing project designs using two-dimensional (2D) drawings. In this practice, a user (e.g. an engineer) has to convert the 2D drawings into three-dimensional (3D) mental pictures, and this is a tedious task. If only converting this 2D drawing is a tedious task, combining these 2D drawings with safety planning creates more difficult tasks. In order to address the problems, this paper discusses our research in integrating construction scheduling and safety planning in a 4D environment.
series	CAADRIA
last changed	2022/06/07 07:55

_id	ecaade03_000
id	ecaade03_000
authors	Dokonal, Wolfgang and Hirschberg, Urs (Eds.)
year	2003
title	Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2003
source	21th eCAADe Conference Proceedings [ISBN 0-9541183-1-6], Graz (Austria) 17-20 September 2003, 677 p.
summary	Digital Design is not only the title of the 21st eCAADe conference 2003 in Graz but also one of the main keywords in Architectural Education nowadays. Information Technology has managed to influence all fields of the “architectural process” and has developed straight from the calculation tools of the engineers over the CAD drafting boards of big architectural firms to every architectural professional and student. This process was incredibly quick in terms of the architectural chronology but very slow in terms of architectural education at universities (at least in Austria). Not very long ago it was sometimes forbidden to deliver CAD drawings for design projects at our faculty. In fact, the early experiments in using the computer in the design process quite often failed because of the restrictions of the available (and affordable) hard-and software. Today, even our first year students start some of their earliest design experiences quite naturally with the computer. However, there are still many questions to be answered and maybe some new questions to be asked in the relationship between architectural design and the computer. Architectural design is mainly a “game of imagination” and today computer tools start to enhance and support the architects visions after a longer period where they were often reduced by the limitations of the tools. Still, there are many different ways to design because every designer has a different approach towards architectural design and there is no such thing as “the perfect digital design tool” for everyone. We hope that this conference with all the different approaches documented in this book plays a major role in the discussion and development of all these aspects and brings us “one step further”.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	1404
id	1404
authors	Hosny, Samir Sadek
year	2003
title	BUIL-D-EX; A Knowledge-Based Expert System for the Diagnosis of Buildings Cracks
source	Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 38, No. 2, June 2003 - pp. 297-310
summary	Expert systems are computer systems developed to preserve the human expertise about specific domains in a well-structured form suitable for retrieval and manipulation by computers. They have been used in many fields of applications and proved to be beneficial. This paper addresses the role of Knowledge-based expert systems in building construction; particularly in the diagnostics and assessment of buildings' cracks. The paper presents BUIL-D-EX; a prototype for a Buildings’ Diagnostics Expert system intended to assist architects, structural engineers, contractors and even building owners in identifying and suggesting remedies to concrete and masonry surfaces' defects. The system identifies the kind of crack, states its most probable causes and its degree of danger, suggests a technical remedy and finally suggests several commercial names for materials to be used for curing the defect, and how to apply them. BUIL-D-EX offers complete explanations for all its questions to the users, as well as justifications for all its decisions and answers whenever needed.
keywords	Expert Systems, Diagnosis, Building Construction, Building Cracks, Backward chaining, Inference, Reasoning
series	journal paper
type	normal paper
email
last changed	2009/09/12 17:18

_id	acadia03_005
id	acadia03_005
authors	Maher, Andrew and Burry, Mark
year	2003
title	The Parametric Bridge: Connecting Digital Design Techniques in Architecture And Engineering
doi	https://doi.org/10.52842/conf.acadia.2003.039
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 39-47
summary	New design opportunities that are facilitated by cross-disciplinary collaboration in both practice and research are available through the use of high level design software that simultaneously offers real time access to both analysis and design geometry in shared three-dimensional digital models. Here we present a collaborative research project between architects and structural engineers for the design of a pedestrian bridge, conceived to test current digital design processes in architectural and structural engineering practice with those in research through the use of models of parametrically defined associative geometry. In this project, the digital model’s architectural design geometry was constrained by the bridge’s fabrication methods and linked with its engineering analysis. Iterations of the design geometry were then optimised or ‘solved’ to produce variations according to the design parameters offered up for change. The shift of the professions from the plane to digital space exposes the possibilities of new design techniques with the exchange of design parameters potentially operating as a digital dialogue between the disciplines—a kind of digital version of Antoni Gaudi’s funicular hanging model—a metaphor of the digital space that has been developed for this project.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	1f6d
authors	Mourshed, M. M., Kelliher, D., Keane, M.
year	2003
title	Integrating building energy simulation in the design process
source	IBPSA News, Vol. 13, No. 1, pp. 21-26.
summary	To significantly increase building energy performance, the use of building simulation software at the earliest has been emphasized. Inherent complexity in data representation, I/O (Input and Output) and Visualization of available software requires specialist knowledge to leverage the potentials offered. Early stages of design are characterized by unstructured and incomplete data which is insufficient as inputs to software based on detailed representations of the systems in the building. Existing simulation software, developed in research organizations are targeted to be used by building services engineers at detailed stages and does not suit the purposes of design community. This article attempts at identifying the reasons behind unpopularity of simulation software in the early stages of design and also argues that a new breed of decision support systems is needed for energy efficient building design.
keywords	ArDOT; Energy Simulation; Integration; Environmental Design; Design Process
series	other
email
last changed	2003/05/27 17:19

No more hits.