Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 378

Reformat results as: short short into frame detailed detailed into frame

_id	acadia03_013
id	acadia03_013
authors	Jabi, W., Goldman, G. and Johnson, B.
year	2003
title	REQUIREMENTS FOR AN EFFECTIVE DISTRIBUTED DESIGN REVIEW
doi	https://doi.org/10.52842/conf.acadia.2003.099
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 99-105
summary	With the wider availability of high-bandwidth communication networks and the maturity of commercial collaboration software, schools of architecture are experimenting with computer-aided distributed design reviews. A distributed design review enables geographically-distant participants to discuss a common design project using computer-supported collaborative technologies such as videoconferencing, voice over IP, and shared applications. While potentially beneficial to students, and attractive to teachers, there are a number of challenges facing the integration of synchronous distributed design reviews into the design studio by technically inexperienced faculty without significant technical support. This paper seeks to make it easier for faculty to make routine utilization of such reviews by examining our own experiences with a number of such reviews, in a variety of contexts, distilling out a set of guidelines for future reviews.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	cf2003_m_051
id	cf2003_m_051
authors	ZAMENOPOULOS, Theodore and ALEXIOU, Katerina
year	2003
title	Computer-Aided Creativity and Learning in Distributed Cooperative Human-Machine Networks
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 191-202
summary	In this paper we discuss designing abilities, such as creativity and learning, as abilities that emerge though interaction in cooperative human-machine networks. We concentrate in a design system that can exhibit and support creative behaviour using knowledge learnt through distributed human-machine interaction. In this context, conflict resolution and coordination is a main issue, as well as a main indicator for the creative and adaptive ability of the design system. More specifically, we are going to present a model of coordination developed using learning control and multi-agent systems methodologies and techniques. A prototype system is tested in a virtual collaborative design assignment for simple location and three-dimensional configuration problems.
keywords	collaboration, creativity, e-learning, human-machine networks
series	CAAD Futures
last changed	2003/09/22 12:21

_id	acadia03_022
id	acadia03_022
authors	Anders, Peter
year	2003
title	Towards Comprehensive Space: A context for the programming/design of cybrids
doi	https://doi.org/10.52842/conf.acadia.2003.161
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 161-171
summary	Cybrids have been presented as mixed realities: spatial, architectural compositions comprised of physical and cyberspaces (Anders 1997). In order to create a rigorous approach to the design of architectural cybrids, this paper offers a model for programming their spaces. Other than accepting cyberspaces as part of architecture’s domain, this approach is not radical. Indeed, many parts of program development resemble those of conventional practice. However, the proposition that cyberspaces should be integrated with material structures requires that their relationship be developed from the outset of a project. Hence, this paper provides a method for their integration from the project’s earliest stages, the establishment of its program. This study for an actual project, the Planetary Collegium, describes a distributed campus comprising buildings and cyberspaces in various locales across the globe. The programming for these cybrids merges them within a comprehensive space consisting not only of the physical and cyberspaces, but also in the cognitive spaces of its designers and users.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade03_029_203_kieferle
id	ecaade03_029_203_kieferle
authors	Kieferle, Joachim and Wössner, Uwe
year	2003
title	Combining Realities - Designing with Augmented and Virtual Reality
doi	https://doi.org/10.52842/conf.ecaade.2003.029
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 29-32
summary	Augmented Reality (AR), the layering of reality and virtuality, can be used as a tool in architecture in model scale as well as in 1:1 scale on site. By combining real architecture models with virtual representations like e.g. wind simulation an intensive understanding for impacts can be observed. Coupling AR with further virtual environments (AR and Virtual Reality) in one scenario makes AR a tangible interface for VR and on the other hand supports the group discussion of distributed teams.
keywords	Augmented Reality, Virtual Reality, Visualization, Interaction, Simulation
series	eCAADe
email
more	http://www.architektur.fh-wiesbaden.de
last changed	2022/06/07 07:52

_id	acadia03_047
id	acadia03_047
authors	Martens, B., Brown, A. and Turk, Z.
year	2003
title	Automated Classification of CAAD-related Publications: Conditions for Setting-Up a Keywording System
doi	https://doi.org/10.52842/conf.acadia.2003.365
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 365-371
summary	This paper deals with the CUMINCAD-repository (Cumulative Index on CAD), which was set up in 1998 and has served the CAAD-community since then as an important source of archived domain related information. CUMINCAD contains over 5,000 entries in the form of publications in the field of Computer Aided Architectural Design. The number has been growing steadily over the years. To date only advanced search mechanisms have been provided to access these works. This may work out well for a just-in-time location of a reference, but is inadequate for just in case browsing through the history of CAAD. For such applications, a hierarchical browsing interface, like one in Yahoo or DMOZ.org is envisioned. This paper describes how the keyword categories were defined and how a moderate, distributed effort in defining the categories will allow machine-identified classification of the entire data set. The aim of the paper is to contribute to building up a wide spread consensus on what the appropriate keyword categories in CAAD are, and what sub-topics should sit below the main keyword categories.
keywords	Web-based Bibliographic Database; Searchable Index; CAAD Research; Classification
series	ACADIA
email
last changed	2022/06/07 07:59

_id	avocaad_2003_11
id	avocaad_2003_11
authors	Michael Cumming
year	2003
title	The promise of peer-to-peer computing versus the utility of centralised data models in collaborative design
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Peer-to-peer (P2P), or distributed computing, involves having computers on a net¬work -peers- acting as both suppliers, as well as consumers of information. With recent developments, most notably the JXTA initiative by Sun Microsystems, such P2P technology will soon become quite easy to implement, in a standardised and secure fashion. P2P technology holds promise in the domain of collaborative design in that it allows design collaborators to exchange information in a manner that appears to have certain advantages over centralised systems, such as greater spontaneity, the ability to self-organize, better scalability, and the ability to handle transient resources in a more robust manner. However, it is not clear how this new technology can be applied to the information needs of collaborative design, in which centralised data models are usually seen as useful. This paper examines some of the positive and negative implications of this new technology in the context of collaborative design.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	64c0
id	64c0
authors	Pektas, S T
year	2003
title	A FRAMEWORK FOR BUILDING DESIGN PROCESS MODELING WITH PARAMETER-BASED DESIGN STRUCTURE MATRICES
source	In C. J. Anumba (Ed.), Innovative Developments in Architecture, Engineering, and Construction. (pp. 25-31). Rotterdam: MillPress
summary	Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is utmost important. While the knowledge needed for building processes are distributed among the different participants from diverse disciplinary backgrounds, the product of their activities, i.e. the building itself, must be highly integrated. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Furthermore, most of the current process modeling tools in the AEC industry do not enable analyses of iteration in the process and they represent the process at high levels with very little information at lower levels. In order to resolve the issues mentioned above, this paper introduces the use of parameter-based dependency structure matrix as a process modeling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. A knowledge management framework for parameter-based DSM applications is proposed and the application of the framework is demonstrated through a real life building design problem.
keywords	Design Integration, Design Process Modeling, Information Flow, and Parameter-based Dependency Structure Matrix
series	other
type	normal paper
email
last changed	2005/12/01 15:52

_id	cf2003_m_079
id	cf2003_m_079
authors	PETRIC, J., CONTI, G. and UCELLI, G.
year	2003
title	Designing within Virtual Worlds
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 213-224
summary	This paper celebrates the successful outcome of a trial of an innovative multi-platform distributed design decision support system in which the shared design environment exists within the virtual world. The outcome is the result of a sustained three-year research and development effort, within an internationally recognised research group. The project set itself a number of ambitious targets within the broad spectrum of distributed design decision support, viz: • A multi-platform environment: the trial demonstrates inter-operability of different machine platforms - from a home PC to an international standard Virtual Reality Centre. • A distributed environment: the trial demonstrates the high level of understanding amongst the design team separated by time and space. • An ability to propose, discuss and agree upon, design decision from within the virtual world. Hitherto, virtual environments were viewing galleries; designers had to leave them to effect design changes in a conventional CAD package. The trial described in the paper amply demonstrates the potential to design, collaboratively and, in distributed mode, from within the virtual world. The two ideas upon which the system (known as JCAD-VR) is built are: • That all the users present in the virtual world have to be able to share the same virtual environment in a "transparent fashion"; • The user interface, instead of the traditional menu/windows based layout, is part of the virtual world itself. Any element of the interface becomes an object belonging to the 3D world and therefore it is treated as any other object. Each element of the interface can then be moved or scaled according to the user’s needs. The entire project is based on client-server architecture where every user logs into a virtual world and starts sharing design tasks with other users. The authors propose to present a video which demonstrates the positive outcome of the trials to date. More importantly, perhaps, the authors will put the achievements of the R+D into the context of past aspirations and developments in the subject area and, most importantly of all, suggest how these modest achievements will impact on the next decade of increasingly rapid R+D.
keywords	collaboration, distributed design, interface, virtual environment
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	sigradi2003_013
id	sigradi2003_013
authors	Russel, Peter
year	2003
title	Understanding Virtual
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Since the introduction of terms like "cyberspace" and "virtual reality", the term "Virtual" has been attached to a range of projects including using computers to draw buildings, distributed studio projects and heavily technologically dependent interfaces for "sensing" digitally modeled environments. The only common aspect of these "virtual" projects is their use of computers. As a way to re-infuse meaning to the term Virtual, the paper describes a theoretical basis for understanding the meaning of being virtual (as opposed to being "Real, Actual" or "Possible") with special attention to the manipulation of ideas as is the case in designing architecture.
keywords	Virtual Reality; Design Theory; Virtual Systems
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2003_014
id	sigradi2003_014
authors	Russell, P., Jackson, M. and Dieckmann, A.
year	2003
title	Separated at Birth
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	While distributed or collaborative design studios have a long pedigree (Donath 1999), there seldom arises the chance to test the limits of the concepts implied by the idea of the physically separated design team. The indigenous differences of culture, schedules and language accentuate this. The authors entered into an experimental design exercise that would seek to explore the range of dualities, which are often encumbered by such studios owing to their very nature. As an additional catalyst in the experiment, a design topic was chosen which reflected the nature of the studio thereby creating a Gödelian knot of self-referentiality.
keywords	Virtual Design Studio; CSCW; Distributed Practice; Intensive Learning
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	caadria2003_a1-3
id	caadria2003_a1-3
authors	Shih, Sheng-Cheng
year	2003
title	A Web-Based Agent Framework for Collaborative Design-Build Communication
doi	https://doi.org/10.52842/conf.caadria.2003.055
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 55-68
summary	The Internet connects the globe as a whole and at the same time pushes the competition increasing dramatically. Multidiscipline and distributed collaborative design-build in architecture, engineering and construction (A/E/C) companies can gain foster competitive advantage, improved designs, and more effective management of construction facilities. However collaboration can often fail, since it involves different professions who often hold different goals and also one-off organizations also build obstacles to collaboration. This paper presents a web-based agent framework to support communication, to facilitate shared understanding amongst the participants and to inspire teamwork. This paper proposes a multi-agent social interaction framework as the communication model of design-build projects. The conceptual framework emp hasizes process-centric learning and the creation of group agreements within design-build collaborative activities, which help facilitate conflict migration. In addition, based upon web agent technology, this communication framework providing an intelligence distribution opportunity for the for the A/C/E industry to introduce a new and innovative paradigm of collaborative design.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	d22f
authors	Voss, A., Roederr, St. and Maerker, O.
year	2003
title	Supporting Communication Processes for Cooperative Planning and e-Government
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Abstract: As a reaction to societal, economic and technological changes, new forms of cooperation are applied in projects of urbanand regional development. We argue that this trend can significantly be amplified by the use of information and communicationtechnologies (ICT). Through ICT more persons can participate in a more focused, open, fairer and more transparent way. Complexinformation can be analyzed, the process is documented, reproducible and comparable. Methods and media can be combined in avery flexible way to design efficient and effective processes.To the extent that projects are stored in a knowledge base, knowledge management tools can exploit accumulating experience tocontinuously improve a methodology for cooperation in spatial development.With the introduction of ICT, existing cooperative methods in government and planning should not simply be copied to the newmedia without further modifications. Electronic techniques (synchronous or asynchronous, distributed or not, audio-, video or textbasedmedia) can be used for different traditional methods in different phases of the process, and they can be combined in completelynew ways, leading to new methods and workflows. Only if this potential of ICT is taken into account by restructuring the processitself, cooperative planning processes lead to informed high-quality decisions in less time.Our approach aims to explore the opportunities that new ICT offers for new cooperation methods in government and planning –beyond the extension of traditional methods to electronic communication media. It acknowledges the need for experimentation andan evaluation, not only concerning isolated methods but the combination of methods.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_075_05_kvan
id	ecaade03_075_05_kvan
authors	Wong, Wilson and Kvan, Thomas
year	2003
title	Agent support for monitoring collaborative design knowledge
doi	https://doi.org/10.52842/conf.ecaade.2003.075
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 75-82
summary	Design teams are typically distributed across many locations and communicate with multiple media. Computer tools have been developed to support and improve such communication. Agent support of design has been discussed in terms of the support of graphical and object based systems. Another aspect of design that is often discounted is the textual dimension. Discussions of media in architectural design typically revolve around graphical forms, be they digital or analogue. This emphasis on graphics overshadows the role of text in design; the interactions of designers requires broader support. In this paper, we consider role of text-agents in support of collaborative architectural design. Text is a common medium to record information in computer technology and has a role to play in an architectural design process. In collaborative environment, a shared understanding and preserved history are important for communication. Design knowledge is accumulated through textual databases, be they email or longer documents. In this way, just as graphics can be seen as a design aid, so too can text. This proof of concept implementation of an agent system demonstrates how collaborative design can benefit from agent support.
keywords	Collaboration, software agents, communication, text
series	eCAADe
email
more	http://arch.hku.hk/~tkvan
last changed	2022/06/07 07:57

_id	acadia03_014
id	acadia03_014
authors	Woo, J.-H., Clayton, M., Johnson, R. and Flores, B.
year	2003
title	Case Study of Tacit Knowledge Sharing in a Distributed Design Studio
doi	https://doi.org/10.52842/conf.acadia.2003.107
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 107-116
summary	This paper demonstrates the effects of experts’ tacit knowledge on improving architectural students’ design artifacts in a distributed design studio. In geographically distributed design environments, the Internet is an important medium by which architects can share tacit knowledge in the form of dialogue via online communication technologies, such as online chat and Instant Messaging (IM). In spring 2003, the National Aeronautics and Space Administration (NASA) and 8 schools conducted a collaborative design studio to develop a crew restraint system for space flights. Online chat software was used as a primary communication channel. Throughout the entire design studio, NASA professionals served as knowledge holders while undergraduate students participated as knowledge seekers. An interpretive content analysis and case study methodology were used in this study. We qualitatively observed the interactions between NASA and the students based upon two aspects: knowledge reflection and design improvement. Data were collected using document analysis of all knowledge sources and students’ design artifacts. The findings of this study indicate that the online chat system is useful in sharing tacit knowledge for the early part of design processes in a distributed design environment. Experts’ tacit knowledge appears to not only influence how students understand problems, but how they initiate conceptual design. This study provides empirical evidence regarding tacit knowledge sharing, and strengthens Schon’s (1983) claim about knowledge reflection in design studio. Furthermore, this study introduces architectural practitioners to the practical necessity of tacit knowledge sharing. This study is significant because its findings indicate the appropriate knowledge management strategy for architectural practitioners.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_047_70_maher
id	ecaade03_047_70_maher
authors	Maher, M.L., Liew, P.-S., Gu, N. and Ding, L.
year	2003
title	An Agent Approach to Supporting Collaborative Design in 3D Virtual Worlds
doi	https://doi.org/10.52842/conf.ecaade.2003.047
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 47-52
summary	3D Virtual worlds facilitate a level of communication and collaboration not readily available in conventional CAD systems. The integration of virtual worlds and CAD systems using a common data model can make a significant impact on synchronous collaboration and real time multi-user multi-disciplinary modification of building data. By using agents, the integration of 3D virtual worlds and CAD systems can go beyond that of passive data transfer. With sensors and effectors, each agent can interact with its environment by responding to changes in the CAD system or 3D virtual world, which can take the form of an update to the geometry, or as a recommendation to change non geometric information or to propagate changes to other parts of the design. The reasoning process for each agent can vary from a reflexive behaviour in which the agent responds directly to the sensor data to a reflective behaviour in which the agents reasons about its goals and alternatives before making a change to the environment. We demonstrate this approach using ArchiCAD and Active Worlds as the CAD system and the virtual world platform. An EDM database is used as the central repository for storing the representation of the relevant data model. A multi-agent system is developed to connect the virtual world to this database to allow active data sharing. This agent approach can be extended to the integration of other applications and data models.
keywords	Design Collaboration, Virtual World, Agent and CAD
series	eCAADe
email
more	http://www.arch.usyd.edu.au/~mary
last changed	2022/06/07 07:59

_id	acadia03_044
id	acadia03_044
authors	Bermúdez, Julio and Foresti, Stefano
year	2003
title	Information Visualization
doi	https://doi.org/10.52842/conf.acadia.2003.x.p5s
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 346
summary	Digital visualization addresses representational challenges from within and without architecture. ‘Disciplinary’ digital visualization is used to explore, understand and communicate architectural information associated with the production of buildings. 3D modeling, rendering, animation and VR as well as the power of digital media to permit the seamless integration of various data types are unleashing completely new ways to display architecture. As digital power continues to increase and get cheaper, portability and wi-fi networks take root, and visualization work becomes even more main stream, we can expect growing changes in the way the design process is conducted, buildings are presented and documented, and the public and 3rd party’s demands from professional services. This demands a more conscious research/pedagogies aimed at developing new representation conventions.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	6252
authors	Drewe, Paul
year	2003
title	The Relation Between the Internet Infrastructure and the Internet Industry
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The scene is set by a survey of new location factors for mobile investment in Europe, published by the European Commission in 1993. This leads to two questions the first of which concerns the exact definition of the Internet industry in order to avoid confusion. The definitional issue appears to be far from simple. The second question is about the Internet infrastructure. This infrastructure, although new and almost invisible, can nevertheless be mapped and measured with less ambiguity than the Internet industry. How to connect the two? How to establish the importance of the Internet infrastructure for the location of the Internet industry? Technological determinism and urban dissolution are debunked as myths. A conceptual innovation is called for: to conceive of the connection between infrastructure and industry as a match between networks. By way of conclusion, this match is discussed from the viewpoint of non-hub cities or regions.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_407_19_sterk
id	ecaade03_407_19_sterk
authors	d’Estrée Sterk, Tristan
year	2003
title	Building Upon Negroponte: A Hybridized Model of Control Suitable for Responsive Architecture
doi	https://doi.org/10.52842/conf.ecaade.2003.407
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 407-414
summary	Responsive architecture is commonly defined as a type of architecture that has the ability to alter its form in response to changing conditions. While this description is successful in capturing the gist of the topic, it does not provide us with the more detailed understandings required to build it. The knowledge required to build a truly responsive form of architecture is substantial, an understanding of architecture, robotics, artificial intelligence and structural engineering are all beneficial. The links that are required between each knowledge base to actuate and control the responses of this type of architecture further complicate matters – suggesting potential reasons for the ambivalence of architects towards deeply exploring to the topic or extending it beyond the aesthetic application of an event-based architecture. This paper will build a model of responsive architecture that explains one possible approach to the topic, emphasizing ways to build it and control it in the process.
keywords	Controlling responsive architecture, Controlling networks of response buildings
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

For more results click below: