Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	f59d
authors	Koelbl, R., Bruntsch, St. and Knoflacher, H.
year	2003
title	Perspective Vienna – A Comparison of Planning Scenarios and Real Development
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	With the suspension of national boarders in unions of nations, cities and their regions gain in significance for the economic, social and cultural development. This is particularly valid for Vienna, which lies close to the eastern boarder of the European Union, which should fall with the enlargement of EU in the near future. Of prominent importance is therefore to obtain a comprehensive understanding between proposed and defined aims for an urban development, the related measures and their extent ofimplementations and their actual or real effects. This paper attempts to give a strategic analysis of the Viennese urban and traffic development programs, from 1962, 1972, 1984 and 1994, on the one hand, and the data analysis of the statistical year books beginning from 1960 until 2000, on the other. The results show that adjustments have been made not only in response to certain trends, but also to a change of philosophy of urban development. It can be seen that certain assumptions of, for example, economic and transport measures can have the opposite outcome in relation to the intended objectives. Hence, one main question remains to beanswered: How should Vienna deal with the challenges ahead, to secure and foster a sustainable development under such circumstances on a long-term basis. In this respect, some measures are given, which should make it possible to overcome successfully these challenges.
series	other
email
last changed	2003/03/11 20:39

_id	sigradi2003_119
id	sigradi2003_119
authors	Bermudez, J., Foresti, S., Agutter, J., Westenskow, D., Syroid, N. Drews, F. Tashjian, E. and Adams, V.
year	2003
title	Metodología Interdisciplinaria para Diseñar Nuevas Arquitecturas de Representación de Datos (Interdisciplinaria Methodologies for the Design of a New Architectures of Data Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Data representation architecture can be defined as the organizational, functional, experiential, formal, and media-technological order defining the interaction between data, representation, and user. This paper presents an interdisciplinary methodology to develop such architectures in order to significantly improve real time decision making in complex data environments. We have reported in some aspects of this work elsewhere. In this occasion, we will describe our working methodology based on complete interdisciplinarity, the design process and evaluation protocols. We will show work done for Finance and Network Monitoring. Our long-term goal is to design a new generation of data representation architectures that is applicable to diverse fields.
keywords	Data representation; visualization; design, architecture, interdisciplinary
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ee5c
id	ee5c
authors	D Gunaratnam, T Degroff and JS Gero
year	2003
title	IMPROVING NEURAL NETWORK MODELS OF PHYSICAL SYSTEMS THROUGH DIMENSIONAL ANALYSIS
source	Journal of Applied Soft Computing 2(4): 283-296.
summary	The paper presents a technique for generating concise neural network models of physical systems. The neural network models are generated through a two-stage process. The first stage uses information embedded in the dimensions or units in which the data is represented. Dimensional analysis techniques are used initially to make this information explicit, and a limited search in the neural network architecture space is then conducted to determine dimensionless representations of variables/parameters that perform well for a given model complexity. The second stage uses information available in the numerical values of the data to search for high-level dimensionless variables/parameters, generated from simple combinations of dimensionless quantities generated in the first stage and which result in concise neural network models with improved performance characteristics. The search for these high-level dimensionless variables/parameters is conducted in an enhanced representation space using functional link networks with flat or near flat architectures. The use and effectiveness of the technique is demonstrated for three applications. The first is the design and analysis of reinforced concrete beams, which is representative of the class of problems associated with the design and analysis of composites. The second is the classical elastica problem, for predicting non-linear post-buckled behaviour of columns and the third, the analysis of a bent bar under a specified combination of loads.
keywords	neural networks, dimensional analysis
series	journal
type	normal paper
email
last changed	2004/04/10 01:57

_id	ijac20031303
id	ijac20031303
authors	Donath, Dirk; Richter, Katharina; Hansen, Stefan
year	2003
title	Internet based support for architectural planning processes
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	As building projects become increasingly more complex, the number of project participants grows as does their spatial distribution. An effective decentralised work process and co-operation is of increasing importance. The global computer network, the internet, has great potential and recent times have seen the development of a variety of techniques in this field. The project described here is based upon this approach and also takes it a step further. A specific analysis of the topic and the subsequent identification of potential approaches formed the basis for an architectural application that brings the architect in contact with other project participants using the internet as a powerful yet simple and easy to use medium.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2003_123
id	sigradi2003_123
authors	Egler, Tamara
year	2003
title	Redes tecno-sociais e ação coletiva (Techno-social nets and collective action)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This study intends to examine the possibilities given by the information technologies for the development of techno-social nets mediated by computers, which makes possible a new kind of collective, a net of individuals in continual communication, for the formation of new spaces of collective action.
keywords	space; network; comunication; colective action; social
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	4450
id	4450
authors	J Jupp and JS Gero
year	2003
title	TOWARDS COMPUTATIONAL ANALYSIS OF STYLE IN ARCHITECTURAL DESIGN
source	IJCAI03 Workshop on Computational Approaches to Style Analysis and Synthesis, S Argamon (ed), IJCAI, Acapulco, pp 1-10.
summary	This paper proposes a computational model of design that attempts to capture within a social context two important aspects of style: ‘content’ and ‘manner’. We present a characterisation of style for the artefact based on a framework that consists of information theoretic measures. We discuss the benefits the study of social networks offers a computational analysis of both aspects of style. It is our aim to bring style as ‘content’ and style as ‘manner’ together using this approach.
keywords	style, information theory
type	normal paper
email
last changed	2004/04/10 02:15

_id	acadia03_018
id	acadia03_018
authors	Kalay, Yehuda E. and Jeong, Yongwook
year	2003
title	Collaborative Design Process Simulation Game
doi	https://doi.org/10.52842/conf.acadia.2003.133
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 133-141
summary	Collaboration is an important aspect of the architect’s education. However, it is not amenable to the traditional project-based learning pedagogy that works so well for developing form-making skills. Being a process, rather than a product, it cannot be revealed by judging the results alone, which is often how form-making skills are taught and judged. Rather, the process of collaboration is only evident when the number of the participants exceeds a certain threshold, and when actions taken by other participants affect an individual’s on-going design decisions. The advent of on-line, multi-player simulation games provides an analogy and an opportunity to explore interactive collaborative design pedagogies. Their abstract nature helps focus attention on the core issues of the simulated phenomenon, while the playful nature of a game, as opposed to “work,” encourages immersion and role playing that contribute to the learning process. This paper describes an on-line game for simulating the design collaboration process. It espouses to simulate, exercise, and provide a feel for the social dimension of collaboration, by embedding mutual dependencies that encourage players to engage each other—in adversarial or collaborative manners—to accomplish their goals. Specifically, it is intended to help students understand what collaboration is, why it is necessary, and how it is done. The game is modeled after popular board games like Scrabble and Monopoly: players build “houses” made of colored cubes on a site shared with other players. Actions taken by one player immediately affect his/her neighbors. A carefully constructed set of rules awards or deducts points for every action taken by a player and by his/her neighbors. The rules were constructed in such a manner that players who collaborate (in a variety of ways) stand to gain more points than those who do not. The player with the most points “wins.”
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2003_c5-3
id	caadria2003_c5-3
authors	Kalay, Yehuda E. and Jeong, Yongwook
year	2003
title	Collaborative Design Simulation Game
doi	https://doi.org/10.52842/conf.caadria.2003.745
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 745-758
summary	Collaboration is an is an important aspect of the architect's education. However, it is not amenable to the traditional project-based learning pedagogy that works so well for developing form-making skills, because it can only be revealed when the number of participants exceed a certain threshold, and when actions made by others affect the individual's design decisions. The advent of on-line, multi-player games provides an opportunity to explore interactive collaborative design pedagogies. Their abstraction helps focus attention on the core issues of the simulated phenomenon, while the playful nature of a game, as opposed to 'work,' encourages immersion and role playing that contribute to the learning process. This paper describes an on-line game for simulating design collaboration. It espouses to simulate, exercise, and provide a feel for the social dimension of collaboration, by embedding mutual dependencies that encourage players to engage each other-in adversarial or collaborative manner-to accomplish their goals. Specifically, it is intended to help students understand what is collaboration, why it is necessary, and how it is done. The game is modeled after popular board games like Scrabble and Monopoly: players build 'houses' made of colored cubes on a site shared with other players.' A carefully constructed set of rules awards or deducts points for every action taken by a player or by his/her neighbors. The rules were constructed in such a manner that players who collaborate (in a variety of ways) stand to gain more points than those who do not. The player with the most points 'wins.'
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac20031407
id	ijac20031407
authors	Kalay, Yehuda E.; Jeong, Yongwook
year	2003
title	A Collaborative Design Simulation Game
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	Collaboration is an is an important aspect of the architect's education. However, it is not amenable to the traditional project-based learning pedagogy that works so well for developing form-making skills, because it can only be revealed when the number of participants exceed a certain threshold, and when actions made by others affect the individual's design decisions. The advent of on-line, multi-player games provides an opportunity to explore interactive collaborative design pedagogies. Their abstraction helps focus attention on the core issues of the simulated phenomenon, while the playful nature of a game, as opposed to 'work,' encourages immersion and role playing that contribute to the learning process. This paper describes an on-line game for simulating design collaboration. It espouses to simulate, exercise, and provide a feel for the social dimension of collaboration, by embedding mutual dependencies that encourage players to engage each other - in adversarial or collaborative manner - to accomplish their goals. Specifically, it is intended to help students understand what is collaboration, why it is necessary, and how it is done. The game is modeled after popular board games like Scrabble and Monopoly: players build 'houses' made of colored cubes on a site shared with other players.' A carefully constructed set of rules awards or deducts points for every action taken by a player or by his/her neighbors. The rules were constructed in such a manner that players who collaborate (in a variety of ways) stand to gain more points than those who do not. The player with the most points 'wins.'
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade03_653_144_koutamanis
id	ecaade03_653_144_koutamanis
authors	Koutamanis, Alexander and Steijns, Yolanda
year	2003
title	Types and precedents in design guidance
doi	https://doi.org/10.52842/conf.ecaade.2003.653
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 653-658
summary	In recent years Dutch secondary education has been undergoing a fundamental change due to the introduction of new didactic approaches which relate strongly to ongoing social and technological developments. This affects existing school buildings, the majority of which is quite conventional in spatial terms and is characterized by limited flexibility and transformability. Consequently, most schools require extensive modifications in their spatial and building structure. The requirements underlying these modifications are not stable. Many schools have become interested in experimental ideas that may require inevitably further changes in the buildings. The paper considers the continuous transformation of Dutch school buildings with respect to their typology: by correlating new design briefs to building types rather than their instances we arrive at general guidelines that can be easily adapted to specific cases. To achieve this, the types are analysed with respect to geometry, topology and zoning. The results of the analysis describe the affordances of each type in terms of general flexibility, transformability and adaptability, as well as in relation to generic briefs. They also provide an explanation of the historical evolution of the types and the means for relating primary characteristics to local configurations, thereby allowing the accurate description of hybrid instances. The descriptions and analysis of buildings are organized into a polyhierarchical multilevel database that supports typological abstraction and offers several starting points (at various abstraction levels) for matching a new brief to an existing building. This enriches the development of the brief or a design solution with explicit, specific information derived from concrete precedents with known form, structure, behaviour and performance.
keywords	Typology, precedence, case-based design, briefing, design information systems
series	eCAADe
email
more	http://www.re-h.nl/transformaties/
last changed	2022/06/07 07:51

_id	caadria2003_b4-1
id	caadria2003_b4-1
authors	Kuo, Chung-Jen
year	2003
title	Spatial Analysis of Chinese Garden Designs with Machine Learning
doi	https://doi.org/10.52842/conf.caadria.2003.541
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 541-552
summary	This research intends to propose a scheme for analyzing Chinese Garden Design by incorporating spatial theory, data mining, concept of object, and network-like data structure. Design elements of Chinese garden are placed in a network according to the existing gardens according to spatial theory. Collected networks are then divided into pair of elements connected by their relationship and stored in a database. Later, data mining is applied to attain patterns from the node-and-relationship pairs. Meanwhile, the elements of the same level can be classified and data grouping can be done by the implementation itself. Thru this research, we can gain insight upon the spatial information and relationship between elements of Chinese garden designs. The result is a set of more concise and structural descriptions, which reveals the rhythm behind the Chinese garden design and can be a great pedagogical aid.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	2d9f
authors	Lalovic, Ksenija and Djukanovic, Zoran
year	2003
title	Possibilities of applying the E-government management concept in Serbian cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Recent urban transformations worldwide consequentially lead to the numerous environmental problems that have to be solved bycomplex structure of social interest groups which have to be included in that process. This demands initiated requisitioning andmodification of concepts and methodologies of planning and managing urban development. At this moment there are differentmodels used in world wide practice, but main bases of new methods and techniques are the same. Leaving the idea of possibility ofconstituting the universal urban planning model lead to very productive results in developing the disciplinary methodologies. Processof transformation of traditional comprehensive urban planning model to integrated procedural pluralistic model (based on sustainabledevelopment principles) is something that can be underlined as a main characteristic of disciplinary development. The questions ofdecision making mechanisms and plans implementation are put in axes of conceptual and methodological considerations. Urbanplanning loses the classic form of making the multi level comprehensive urban plans with exact spatial and time horizon. It means, ingeneral that planning and managing of urban development is aiming to be realistic, decentralized, strategic and problem oriented,arbitrary, not instructive, but understood as a efficient and effective process.Operational support to the this kind of approach are Decision Support IT tools, such as GIS - Geographical Information Systems orES -Expert Systems. Usability of IT tools is based on their capability to perform fast and complicated processing of spatial data andon their flexibility towards specific real problems which are to be solved. In order to use maximum of capabilities of these tools inpractice problem solving it is necessary to adjust their structure and usage to the: - actual conditions of socioeconomic of the contextin which urban development planning and management is performed, - practical demands that managing of urban development has tofore fill, - all participants in urban management process, - institutional mechanisms and procedures.
series	other
email
last changed	2003/03/11 20:39

_id	mourshedp503final
id	mourshedp503final
authors	Monjur M Mourshed, Denis Kelliher, Marcus Keane
year	2003
title	ArDOT: A tool to optimise environmental design of buildings
source	Building Simulation 2003 (Eighth IBPSA Conference). Eindhoven, Netherlands
summary	Environmental design of buildings involves ‘finding the optimum’ solution satisfying predefined objective(s) (e.g., reduction in operating/capital cost, maximisation of daylighting etc.). A number of computer based simulation models exist to assist professionals in finding this optimum through building performance assessment. Contemporary practices involving building simulation require enormous effort to prepare input, extract output, and visualize data, which restricts designers from realizing the full potentials offered. In most cases, rules of thumb are applied and experienced guesses are made; simulation software is used only to validate the assumptions, which do not necessarily lead to the intended optimum. Moreover, these tools have been developed as simulation engines, which is inadequate to visualize the compounded and interdependent effect of a large number of design variables. The authors believe that to realize the potential offered by building simulation software, a new breed of DBSs (Decision Based Systems) is needed coupling existing simulation engines with formal optimisation methods through neutral data standards (BPM – building product models) for seamless integration. This paper first elaborates on the previous attempts at solving integration issues related to the design process and simulation; also attempts at finding the limitations. Secondly, formulation of design problems as optimisation has been discussed with reference to the different stages of design. Thirdly, for effective integration of activities among stakeholders and processes, the use of client/ server oriented building product model has been proposed to overcome the limitations of file-based prototypes. Analysis and discussions based on the above aspects form as justification for ArDOT, an Architectural Design Optimisation Tool under development at IRUSE, National University of Ireland, Cork. Combining all three aspects into one makes ArDOT unique, which is essentially an enhanced decision making tool for the design of energy efficient buildings.
keywords	ArDOT, Architectural Design Optimisation, Building Energy Simulation, EnergyPlus
series	other
email
last changed	2003/08/27 11:57

_id	ecaade03_165_201_oxman
id	ecaade03_165_201_oxman
authors	Oxman, Rivka
year	2003
title	Being There: Architectural Metaphors in the Design of Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.2003.165
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 165-168
summary	The paper reports on a research program to define the issues and strategies involved in the design of virtual architecture. Issues and categories of virtual architecture are identified and classified. An approach to the design of virtual place is derived from a large body of emerging literature as well as from the analysis of case-studies. We demonstrate and discuss how paradigms of physical design may be applied to support the needs of design for cyber-place. We attempt to define intrinsically digital possibilities for interface design that are not based upon a direct analogy to physical space. The findings in the form of alternative development possibilities and design guidelines may provide a guide to the field of virtual architecture, to its definition, design issues, and potential strategies.
keywords	Cyberspace, cyber-place, virtual architecture
series	eCAADe
email
more	http://www.technion.ac.il/~oxman
last changed	2022/06/07 08:00

For more results click below: