Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade03_607_140_mpapavasiliou
id	ecaade03_607_140_mpapavasiliou
authors	Papavasiliou, Mattheos
year	2003
title	Digital space and ephemeral visuals as determinants of contemporary design: A Survey of Projects of Architectural Students in CAAD
doi	https://doi.org/10.52842/conf.ecaade.2003.607
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 607-611
summary	Outside of views produced deliberately for the design of architecture, there exists a large body of images; visuals of no materialized spaces, constructed only on paper or in pixels in popular cultural media – editorial illustration, comic strips and books, cinema, television, advertising and web imagery. All the aforementioned visuals, fragments of architecture are within our everyday life and more important influence strong spatial paradigms for students of architecture. The proposed presentation is about the work within a university Computer Aided Architectural Design studio where students asked to investigate the ephemeral environments that surround their everyday life and translate them into architectural intentions. This paper argues that the digitally mediated design of young students of architecture incorporates the ubiquity of contemporary life-style; reflects through student design proposals the new orientations of contemporary architecture and finally revises the integration of the CAAD studio with the ‘traditional’ studios of design within the school of Architecture.
keywords	CAAD and Design Studio Teaching
series	eCAADe
email
more	http://www.design-clinic.com/m.papavasiliou/
last changed	2022/06/07 08:00

_id	ecaade03_199_196_gatermann
id	ecaade03_199_196_gatermann
authors	Gatermann, Harald and Czerner, Juergen
year	2003
title	Modular E-Learning-Environment for Architecture
doi	https://doi.org/10.52842/conf.ecaade.2003.199
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 199-202
summary	IMLAB (Interdisciplinary Modular Learning System for Architecture and Building Science) is a project, startet by three schools of architecture in Germany: a modular, digital and online-based system, which has the aim to collect and improve teaching elements from architectural schools around the world. The development of digital teaching materials at every single university is very expensive - so the idea is to motivate schools all over the world to contribute their teaching materials and teaching moduls. It could work like an architectural ""napster"". The initial development of this kind of teaching community was funded by the German Federal Ministry of Research as a research project. The momentary state of work is documentated on the following website: www.imlab.de. Unfortunately all the information is in German up to now - we will develop the english version as soon as possible. We do have interactive workshops and design-projects beetween different universities up to now (in Germany) and several contacts to international partners. We would like to use eCAADe 2003 as a platform for multiplying this idea and finding more partners from all over the World.
keywords	e-learning, modular, synchronous, asynchronous, knowledge-base
series	eCAADe
email
last changed	2022/06/07 07:51

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	ijac20031407
id	ijac20031407
authors	Kalay, Yehuda E.; Jeong, Yongwook
year	2003
title	A Collaborative Design Simulation Game
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	Collaboration is an is an important aspect of the architect's education. However, it is not amenable to the traditional project-based learning pedagogy that works so well for developing form-making skills, because it can only be revealed when the number of participants exceed a certain threshold, and when actions made by others affect the individual's design decisions. The advent of on-line, multi-player games provides an opportunity to explore interactive collaborative design pedagogies. Their abstraction helps focus attention on the core issues of the simulated phenomenon, while the playful nature of a game, as opposed to 'work,' encourages immersion and role playing that contribute to the learning process. This paper describes an on-line game for simulating design collaboration. It espouses to simulate, exercise, and provide a feel for the social dimension of collaboration, by embedding mutual dependencies that encourage players to engage each other - in adversarial or collaborative manner - to accomplish their goals. Specifically, it is intended to help students understand what is collaboration, why it is necessary, and how it is done. The game is modeled after popular board games like Scrabble and Monopoly: players build 'houses' made of colored cubes on a site shared with other players.' A carefully constructed set of rules awards or deducts points for every action taken by a player or by his/her neighbors. The rules were constructed in such a manner that players who collaborate (in a variety of ways) stand to gain more points than those who do not. The player with the most points 'wins.'
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	4c01
authors	Laranjeira, Teresa
year	2003
title	The S. Pedro da Cova Community Knowledge Centre, a local example of empowerment through technology
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	S. Pedro da Cova (Gondomar), located ten kilometres from the city centre of Porto (Portugal), is considerate a depressed territory, with a large spectrum of social, economic and urban problems, but also with local positive aspects capable to reach the different development opportunities.In the ambit of the regeneration process for this area, the local authority draw a strategy based in the empowerment of the citizens, where the Information Communication Technologies (ICT’s) assumed a major role. With this purpose, it was intended to build a Community Technology Centre for the disfavoured children. From the building construction till the first activities, it is our conviction that to break the differences between the have and the have not’s it will be very important to conciliate the new technologies and the local characteristics. The children will be the active agents in the dissemination of the project through the development of the different activities, sensitising the families to adopt a healthy life and announce situations of risk, for example. To validate the project will be created an permanent observatory that propose a moment of reflection and auto-valuation about the evolution of the different activities, thechanges to do, and the identification of new problems and the redefinition of new methodologies. The aim of the article is not only to show the positive aspects, indeed significant, but also to bring into discussion some questions; in order to understand the possibility of defining an empowerment strategy based in the ICT’s. How to conciliate the individualperspectives of the future into a common objective? How to show to all community that information and knowledge are fundamentalto build a more liveable and equity neighbourhood? How to transfer the results to a larger strategy for the entire city? And, at theend, how to explain that people is the most important "infrastructure" to build a better future?
keywords	Social Exclusion; Informal Urban Structure; Empowerment; Spaces of Knowledge
series	other
email
last changed	2003/03/11 20:39

_id	ecaade03_237_51_zone
id	ecaade03_237_51_zone
authors	Lee, Y.Z. Lim, C.K. and Liu, Y.T.
year	2003
title	Multiple digital media in realizing various urban spaces: Project 2050 Taiwan
doi	https://doi.org/10.52842/conf.ecaade.2003.237
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 237-246
summary	In Taiwan, it is a common phenomenon that landscape, urban spaces, and buildings are not considered as a whole by governments at all levels and private clients. More terribly, the government has never proposed any urban statement for the future. The Minister strongly therefore proposes this statement: 2050 vision Taiwan, aim to design the public spaces for the life of Taiwan in the year 2050. The Council for Culture Affairs plans to spend two years to cover 100 locations and invite 20 design teams to provide new vision of the places. Our design team, AleppoZONE first conducts the initial stage of this project that includes three areas of Taiwan: Taipei as the capital of Taiwan is expected to become a better place reflecting new and old space combination. Hsinchu is planned to explore the prototype for a digital city where digital technology is wellinstalled in the city plaza and public buildings. In the island of Pen-Hu, the ecology and high-tech transportation are equally considered to shape Pen-Hu as an island with nature. In the process, design team successfully synthesizes digital models and dynamic films into virtual and physical coexisting environmental animations by using multiple digital media in realizing the 2050 vision cities. The aim of this research is to give a throughout introduction of this project.
keywords	Digital media; urban spaces; representation
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade03_059_29_russel
id	ecaade03_059_29_russel
authors	Russell, P., Stachelhaus, T. and Elger, D.
year	2003
title	CSNCW: Computer Supported Non-Cooperative Work Barriers to Successful Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.2003.059
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 59-66
summary	The paper describes a design studio jointly undertaken by four Universities. With respect given to the groundbreaking work carried out by [Wojtowicz and Butelski (1998)] and [Donath et al 1999] and some of the problems described therein, the majority of the Studio partners had all had positive, if not exemplary experiences with co-operative studio projects carried out over the internet. The positive experience and development of concepts have been well documented in numerous publications over the last 5 years. A platform developed by one of the partners for this type of collaboration is in its third generation and has had well over 1000 students from 12 different universities in over 40 Projects. With this amount of experience, the four partners entered into the joint studio project with high expectations and little fear of failure. This experimental aspect of the studio, combined with the “well trodden” path of previous virtual design studios, lent an air of exploration to an otherwise well-worn format. Everything looked good, or so we thought. This is not to say that previous experiments were without tribulations, but the problems encountered earlier were usually spread over the studio partners and thus, the levels and distribution of frustration were more or less balanced. This raised a (theoretically) well-founded expectation of success. In execution, it was quite the opposite. In this case, the difficulties tended to be concentrated towards one or two of the partners. The partners spoke the same language, but came from different sets of goals, and hence, interpreted the agreements to suit their goals. This was not done maliciously, however the results were devastating to the project and most importantly, the student groups. The differing pedagogical methods of the various institutes played a strong role in steering the design critique at each school. Alongside these difficulties, the flexibility (or lack thereof) of each university’s calendar as well as national and university level holidays led to additional problems in coordination. And of course, (as if this was all not enough), the technical infrastructure, local capabilities and willingness to tackle technological problems were heterogeneous (to put it lightly).
keywords	CSCW: Virtual Design Studio; Mistakes in Pedagogy
series	eCAADe
email
more	http://caad.arch.rwth-aachen.de
last changed	2022/06/07 07:56

_id	sigradi2003_023
id	sigradi2003_023
authors	Saez, J., Saez, A. and Gómez, G.A.
year	2003
title	Tamaño importa r punto (The size is important to the point)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Our proposal consists of showing how a PIXEL (a small part of a whole) can have a life of its own when it is taken out of its enviroment. This pixel, alone, is nothing, since it depends on others and a context to actually be something (a figure, etc.). Even though we initially emphasized that the pixel could very well be the main character of a play (which we still believe is true) we also wish to point out that today`s subject is to try to go above and below all studies, technology and even science, to try to find the answer in the most basic facts. The PIXEL now teaches us that "it" is the most noble single element that a digital artist can find. Most certainly, this issue will not add anything to science, and it might not change theories or the world itself; furthermore, we probably will not show anything that is not already known and no intelligent discussion will come up regarding the relevance or irrelevance of the pixel isolated from its context. Still, it is important to remark that the PIXEL, the smallest single creature that I know, has been the issue of many, many discussions and quire a few hours of work.
keywords	Big things, Little things
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	acadia05_254
id	acadia05_254
authors	Sheil, Bob and Leung, Chris
year	2005
title	‘Kielder Probes’ – bespoke tools for an indeterminate design process
doi	https://doi.org/10.52842/conf.acadia.2005.254
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 254-259
summary	Sixteen (makers) are a group of practicing architects, academics, designers and makers who assemble when key questions surrounding design, fabrication, use and adaptability in architecture emerge. Initially, the group was formed out of a motivation to engage as designers with the physical and tactile aspects of production without a dependency upon drawing. Now, in the post digital age, the age of digital fabrication, boundaries between drawing and making, between the designer and the maker, have dissolved. Consequently sixteen(makers) work is now engaged with questions of knowledge transfer, expertise, and innovation where modes of investigation are equally embedded within in the analogue and the digital world. This article relates to our latest ongoing work which is due for completion in 2005/06. The work has been developed as a specific response to the award of an architectural residency by the Art and Architecture Partnership at Kielder Park, Northumbria, England. From the outset, it has not been a requirement of the residency that an outcome is identified early on. In fact, as I write, the outcome remains open. Presented with an extraordinary site and coinciding with a time of rapid change the work has begun by exploring a design process that is adaptable, indeterminate, and informed by site conditions. In October 2003, sixteen(makers) were awarded an architecture residency by The Art and Architecture Programme at Kielder (AAPK) of Northumbria, UK. This organization is well known for commissioning works such as the ‘Belvedere’ by Softroom and the ‘Skyspace’ by James Turrell. Coordinated by Peter Sharp, AAPK consists of a number of large public bodies, including The Forestry Commission, Northumbrian Water and Tyndale District Council. Together they manage a land area of 62,000 ha’s centred on the UK’s largest reservoir and surrounded on all sides by one of Europe’s largest managed forests.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
doi	https://doi.org/10.52842/conf.ecaade.2003.587
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2003_005
id	sigradi2003_005
authors	Barros, D.R., Mandagarán, M., Susta, C. and Nigro, P.
year	2003
title	Hipermedios y no linealidad (Hypermedia and non-linearity)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The following is the preliminary presentation of a study being carried out at the CEAC FAUD UNMdP Center, registered within the research project 15/B101, on hypermedia readings of urban fragments by non-expert users. This work aims at contributing to the definition of an analysis methodology applicable to hypermedia, Web site and CD rom, about design and architecture topics. It is based on the model of analysis by Aarseth, enlarged for hypermedia. Its purpose is to recognize and describe the features, recurrencies, saturations and differences which characterize them.
keywords	Hypermedia, design, analysis methodology
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2003_072
id	sigradi2003_072
authors	Braga, Gisele Pinna
year	2003
title	O modelo digital auxilia a compreensão do desenho arquitetônico ou o desenho arquitetônico auxilia a compreensão do modelo digital (The digital model assists the understanding of the architectural design or the architectural design assists the understanding of the digital models)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In order to design architecture projects, 1st grade architecture students have to understand the space and how to figure it out. To be succeeded in the design process it is necessary to develop their spatial abstraction capability. Each architectural representation tool can contribute for this development. This work shows the pedagogical experience applied to students of the first grade of architecture course at UNICENP, in Curitiba, Brazil, approaching the strategies of different subjects to increase the development of spatial skills using different architecture design tools.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ijac20031204
id	ijac20031204
authors	de Vries, Bauke; Achten, Henri; Orzechowski, Maciej; Tan, Amy; Segers, Nicole; Tabak, Vincent; Jessurun, Joran; Coomans, Marc
year	2003
title	The Tangible Interface: Experiments as an Integral Part of a Research Strategy
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	The Human-Computer interface is crucial to good design support tools. It has to be non-interruptive and non-distracting, yet allow the architect to interact with the computer software. The physical reality of the interface, such as the shape and manipulability of devices like the mouse, keyboard, joystick, or data-glove, has to be mapped on actions and commands in the software. Already the current user interfaces are felt to be inadequate for a good support of design, and the functionality of design tools is growing, requiring even more and new physical interface devices. In this paper, we present research on new tangible interfaces for architectural design support. In particular, we focus on the research methodological question how to investigate such devices.The research strategy is introduced and discussed, after which concrete implementations of this strategy are shown. Based on this work, we conclude that the combination of interface and the context of its use in terms of design method and user needs form crucial aspects for such research and cannot be considered separately.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_000
id	ecaade03_000
authors	Dokonal, Wolfgang and Hirschberg, Urs (Eds.)
year	2003
title	Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2003
source	21th eCAADe Conference Proceedings [ISBN 0-9541183-1-6], Graz (Austria) 17-20 September 2003, 677 p.
summary	Digital Design is not only the title of the 21st eCAADe conference 2003 in Graz but also one of the main keywords in Architectural Education nowadays. Information Technology has managed to influence all fields of the “architectural process” and has developed straight from the calculation tools of the engineers over the CAD drafting boards of big architectural firms to every architectural professional and student. This process was incredibly quick in terms of the architectural chronology but very slow in terms of architectural education at universities (at least in Austria). Not very long ago it was sometimes forbidden to deliver CAD drawings for design projects at our faculty. In fact, the early experiments in using the computer in the design process quite often failed because of the restrictions of the available (and affordable) hard-and software. Today, even our first year students start some of their earliest design experiences quite naturally with the computer. However, there are still many questions to be answered and maybe some new questions to be asked in the relationship between architectural design and the computer. Architectural design is mainly a “game of imagination” and today computer tools start to enhance and support the architects visions after a longer period where they were often reduced by the limitations of the tools. Still, there are many different ways to design because every designer has a different approach towards architectural design and there is no such thing as “the perfect digital design tool” for everyone. We hope that this conference with all the different approaches documented in this book plays a major role in the discussion and development of all these aspects and brings us “one step further”.
series	eCAADe
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

For more results click below: