Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	6648
authors	Issa, Rajaa
year	2003
title	Cellular Texture Generator for Architectural Models
source	University of Texas at Arlington, Department of Computer Science and Engineering
summary	Cellular materials are used extensively in architectural settings. These materials usually have well defined geometry such as brick, stone and tiles. Patterns created with cellular materials are mostly the product of an intuitive design process that goes through cycles of synthesis and reflection until reaching final solution. Therefore interactivity is critical to intuitive designs. This paper presents a system that enables interactive creation of 3D cellular textures. It recognizes critical design areas that can have special design consideration such as edges. The system makes use of existing graphic engines and provides an intuitive interface to create patterns interactively. Rendering time is also considered through defining multiple levels of details for cells so it looks convincing in different scales. The paper presents results with an implementation of cellular texture generation system. It also shows some examples of brick walls generated with this implementation.
series	thesis:MSc
email
last changed	2003/04/25 07:20

_id	caadria2003_c4-1
id	caadria2003_c4-1
authors	Santos, Eduardo T. and Derani, Luis A.
year	2003
title	An Immersive Virtual Reality System for Interior and Lighting Design
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 593-596
doi	https://doi.org/10.52842/conf.caadria.2003.593
summary	We are developing an immersive virtual reality system for interior and lighting design where, inside a CAVE(r), one can change at will the color, texture and finishing of all elements in the simulated environment (walls, floor, furniture and decoration) as well as position, type, color and intensity of all light sources. Although the rendering algorithm used in the system is the ray tracing, preliminary results show we are able to achieve almost real time performance. The system is intended to both help architects to better communicate their design ideas to clients through an advanced visualization tool and also speed up the interior and lighting design processes.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2003_119
id	sigradi2003_119
authors	Bermudez, J., Foresti, S., Agutter, J., Westenskow, D., Syroid, N. Drews, F. Tashjian, E. and Adams, V.
year	2003
title	Metodología Interdisciplinaria para Diseñar Nuevas Arquitecturas de Representación de Datos (Interdisciplinaria Methodologies for the Design of a New Architectures of Data Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Data representation architecture can be defined as the organizational, functional, experiential, formal, and media-technological order defining the interaction between data, representation, and user. This paper presents an interdisciplinary methodology to develop such architectures in order to significantly improve real time decision making in complex data environments. We have reported in some aspects of this work elsewhere. In this occasion, we will describe our working methodology based on complete interdisciplinarity, the design process and evaluation protocols. We will show work done for Finance and Network Monitoring. Our long-term goal is to design a new generation of data representation architectures that is applicable to diverse fields.
keywords	Data representation; visualization; design, architecture, interdisciplinary
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2003_m_001
id	cf2003_m_001
authors	CHEVRIER, Christine and PERRIN, Jean Pierre
year	2003
title	ModLum - Illumination Project Aided Design Tool
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 361-370
summary	Illumination phenomena simulation is important for architectural project design and communication: simulation tools must assist efficiently the designer; results have to be reliable and realistic for the decision-makers. Indeed, it is very difficult, for a nonspecialist to imagine the result of an illumination from the light designer plans. Experience shows that the success of a photo-realistic simulation relies essentially on the choice of the light source characteristics and their correct positioning in the scene. This paper first presents the specificities of illumination projects (very large geometrical data bases enlightened by a large amount of light sources) and the difficulties of their set-up. Light arrangement requires tricky compositions, judicious choices and accurate studies. Currently there is no specific modeller for the handling of light sources as they are considered in radiosity software. Then we present the interactive tool we have developed, named ModLum, in order to set up light sources in a 3D architectural model in order to save time during the design step and simplify the source handling. ModLum specifications and principles are presented. Finally, an application is presented: the illumination project of two cloisters in Quito (Ecuador, South America).
keywords	architecture, lighting, simulation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	43f0
id	43f0
authors	Flynn, D., van Schaik, P., Blackman, T., Fencott, P.C., Hobbs, B., & Calderon, C.
year	2003
title	DEVELOPING A VIRTUAL REALITY-BASED METHODOLOGY FOR PEOPLE WITH DEMENTIA: A FEASIBILITY STUDY.
source	Journal of CyberPsychology and Behavior, Vol6, Number6, 2003.
summary	The aim of this study was to examine the feasibility of virtual reality (VR) technology for use by persons with dementia (PWD). Data were obtained directly from six PWD regarding their experiences with a virtual environment (VE) of a large outdoor park. A user-centered method was developed to assess: (a) presence; (b) user inputs; (c) display quality; (d) simulation fidelity; and (e) overall system usability. The extent to which PWD could perform four functional activities in the VE was also investigated (e.g., mailing a letter). In addition, physical and psychological well-being of PWD while interacting with the VE was assessed objectively by recording heart rate during the VR sessions and subjectively with discrete questionnaire items and real-time prompts. Symptom profiles associated with simulator sickness were assessed with an adapted version of the Simulator Sickness Questionnaire. The study found that PWD to some extent experienced presence; perceived that objects were realistic and moved naturally; generally felt in control of the interaction; and demonstrated little difficulty using a joystick for navigation. The study also demonstrated that VR is an appropriate medium for assessing functional behavior within the context of an ecologically valid VE. PWD did not experience any significant increase in symptoms associated with simulator sickness, or detriments to their psychological and physical well-being. These findings demonstrated that it is feasible to work in VEs with PWD.
keywords	Dementia, VR
series	journal paper
type	normal paper
email
last changed	2005/12/02 11:36

_id	7655
authors	Okeil, Ahmad and El Araby, Mostafa
year	2003
title	Realism vs. Reality in Digital Reconstruction of Cities
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The digital reconstruction of existing cities using virtual reality techniques is being increasingly used. For consultants, municipalities and planning departments these models provide decision support through visual simulations (El Araby, 2001). For academia they provide a new tool for teaching students urban design and planning (Okeil, 2001). For authorities they provide a tool for promoting the city on the world wide web trying to attract more businesses and tourists to it. The built environment is very rich in detail. It does not only consist of open spaces surrounded by abstract buildings but it also includes many smaller objects such as street furniture, traffic signs, street lights, different types of vegetation and shop signs for example. All surfaces in the built environment have unique properties describing color, texture and opacity. The built environmentis dynamic and our perception is affected by factors such as pedestrian movement, traffic, environmental factors such as wind, noise and shadows. The built environment is also shaped by the accumulation of changes caused by many influences through time. All these factors make the reconstruction of the built environment a very complex task. This paper tries to answer the question: how realistic the reconstructed models of urban areas can be. It sees “Realism“ as a variable floating between three types of realties. The reality of the physical environment which we are trying to represent. The reality of the digital environment which will host the digitally reconstructed city. And the reality of the working environment which deals with the problem of limitation of resources needed to digitally reconstruct the city. A case study of building a 3D computer model of an urban area in the United Arab Emirates demonstrates that new time-saving techniques for data acquisition can enhance realism by meetingbudget limitations and time limitations.
keywords	Virtual Reality; Photo Realism; Texture Maps; 3D Modeling; Urban Design
series	other
email
last changed	2003/03/11 20:39

_id	caadria2003_b1-2
id	caadria2003_b1-2
authors	Chakraborty, Somen
year	2003
title	Automated Generation of Residential Roomlayout within a Constrained Covered Area
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 85-100
doi	https://doi.org/10.52842/conf.caadria.2003.085
summary	A significant quantum of all buildings constructed in modern times is designed for residential purpose. A tremendous amount of money is being spent every year for construction of residential buildings. Therefore, optimization of design becomes very important. In a country like India most people in urban area live in houses having constrained area. A significant part of residential units comes under mass housing either as high-rise building blocks or as plotted developments. In any of such schemes there are large number of housing units for a group of families of whom general characteristics are known but characteristics of individual families are not known at the time of designing. This situation is, however, suitable for scientific investigation and analysis based on statistical surveys. Broadly speaking, this paper suggests approach to deal with this situation of finding optimum layout of rooms of a housing unit for any target group of families when the covered area is so constrained that freedom of using different criteria like aesthetics, structural systems, materials and methods of construction in varieties of ways is drastically reduced. In such constrained area for housing units rooms are generally found rectangular within overall rectangular outline of each unit. Method shown here is valid under this restriction. It is also assumed that number of rooms will be restricted to such number that exhaustive search for design is practically possible within a reasonable time with present day capabilities of normally available PCs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2003_054
id	sigradi2003_054
authors	Manes, Sergio
year	2003
title	La generación de espacios complejos a partir de leyes simples como estimulante de la imaginación tridimensional (The generation of complex spaces from simple laws as a means for stimulating traditional imagination)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This report uses an exercise of design exploration, and its subsequent evolution, in order to show the important growth and development achieved with a researching application by mean of analogical media, adding the new technology of the digital media. The present work shows the evolution of alternates design exercises, used for a long time as a way of teaching in the field of design by researchers teams of this area.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	autcons0926580503000529
id	autconS0926580503000529
authors	Maver, T.; Petric, J.
year	2003
title	Sustainability: real and/or virtual?
source	Automation in Construction, 12(6), November 2003, pp. 641–648
summary	The starting point for this paper is the identification of the four necessary and sufficient conditions which a building should exhibit to be judged to be sustainable; fitness-for-purpose, cost effectiveness, environmental friendliness, and cultural significance. The contribution which the current generation of CAD tools is making to the complex human activity of designing sustainable buildings is then discussed under the headings of widening the search for solutions, integrating the decision-making process, improving design insights, differentiating objective/subjective issues and photorealistic visualization. The paper then describes developments in the next generation of IT tools, based on virtual reality, which will allow multiple designers, working in distributed locations and on different computer platforms, to design from within the virtual world.
keywords	Sustainability; Virtual reality; Computer-aided design; Virtual environments
series	journal paper
type	normal paper
email
last changed	2013/09/20 19:05

_id	acadia03_053
id	acadia03_053
authors	More, G., Padgham, L., Mathieson, I. and Burry, M.
year	2003
title	Multidimensional Presentation Environments with IntegratedIntelligent Agents
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 421-425
doi	https://doi.org/10.52842/conf.acadia.2003.421
summary	A Multidimensional Presentation Environment (MPE) is defined here as a digital environment containing spatially located data that can be navigated by a presenter. Given an array of data types and the potential infinity of the associated datascapes, there is an opportunity to develop systems that assist the presenter in the navigation and analysis of complex information scenarios. This research reports on the utilisation of intelligentagent based software for a better understanding of spatial information representation within the MPE. This is achieved by utilising intelligent agent software to aid the presenter in the searching, retrieving, and articulation of datasets, and the application of such technologies in the generation of time based 3D graphical and audio presentations.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	cf2003_m_024
id	cf2003_m_024
authors	SEGERS, Nicole S. and de VRIES, Bauke
year	2003
title	The Idea Space System - Words as Handles to a Comprehensive Data Structure
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 31-40
summary	The Idea Space System is a CAAD system that supports an architect in the early phase of the design process, by reducing fixation in the process and enhancing the ‘flow’ of work. Mostly in the field of CAAD research, the emphasis lies on sketching or modelling. However the architect uses multiple representations in developing the design. In this research the focus lies on the use of words. The Idea Space System captures all design data and then uses the words to provide the architect with new associations and relations between words (real time), which stimulate the generation of new ideas. Architecture students have used our first prototype of the Idea Space System in a small experiment. This gave us better insight in the ideas and relations made by the architect in the early phase of the design process and what kind of feedback preferred. Afterwards a study was done about the representation of the feedback. In this paper we focus on the textual input provided by the architecture students and the description of the Idea Space System, handling this textual input and providing the architecture students with the proper feedback.
keywords	conceptual, information modelling, design thinking, text
series	CAAD Futures
email
last changed	2003/11/22 07:23

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
doi	https://doi.org/10.52842/conf.ecaade.2003.587
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	c5c5
id	c5c5
authors	Calderon, C., Cavazza M. and Diaz, D.
year	2003
title	A NEW APPROACH TO VIRTUAL DESIGN FOR SPATIAL CONFIGURATION PROBLEMS,
source	7th IEEE International Information Visualisation Conference, London, UK, 16-17 July 2003. http://www.graphicslink.demon.co.uk/IV03/
summary	In this paper, we present a new framework for the use of Virtual Reality (VR) in engineering design for configuration applications. Traditional VR systems support the visual exploration of a design solution but do not assist the user in exploring alternative solutions based on domain knowledge. Extending previous work in the area of Intelligent Virtual Environment, we propose an intelligent configuration system based on constraint logic programming (CLP), integrated in a real-time 3D graphic environment. This type of integration facilitates the expression of design knowledge in the VE and enables the user to interactively solve and/or refine a spatial configuration problem. In the system described in this paper, the user can visually explore configurations, but his interaction with objects of the configuration problem triggers new cycles of constraint propagation from the modified configuration to produce a new compatible solution.
keywords	Virtual Reality, Virtual Design
series	other
type	normal paper
email
last changed	2005/12/02 11:31

_id	caadria2003_b4-2
id	caadria2003_b4-2
authors	Choi, Jin Won and Park, Jae Wan
year	2003
title	Developing a Building Design Compiler that Frequently evaluates Building Design Performance within the Design Process
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 553-566
doi	https://doi.org/10.52842/conf.caadria.2003.553
summary	This paper demonstrates an experience in the development of a design performance evaluation system that can frequently evaluate building design performance within the design process in a real-time manner. The evaluation system, that we call "design compiler," is composed of several modules such as a front-end component-based CAD engine, a knowledge base, and a set of design agents. The notion of the design compiler is quite similar to a compiler for computer programming such as a C compiler. While a computer programmer compiles a set of programming codes to check compiling errors during the implementation of a software system, an architectural designer can 'compile' his/her intermediate design product to evaluate design errors during the design process. The compilation can be done immediately at any level or any time during the design process in a real-time manner. We expect that this compiling process will dramatically increase design feedbacks, and thus result in a better design product. Further research issues that have been identified at the end of the research include increasing the modeling capability, extending to multi-story building representation, developing various design agents, exploring better ways to request and manage design knowledge, and supporting design collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	cf2003_m_097
id	cf2003_m_097
authors	FRÖST, Peter
year	2003
title	A Real Time 3D Environment for Collaborative Design
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 203-212
summary	By setting up collaborative design processes in architecture it is possible to considerably improve the integration of customer needs and ideas into the programming phase of a building project. Our design process includes active collaboration between customers, users and other stakeholders as well as the use of virtual environments in conceptual design. The output from the process is treated as visualised input to the architectural programming. The work presented focuses on developing digital tools to support this collaborative design dialogue. We have developed an extremely “easy to use” digital modelling tool called “ForeSite Designer”. The tool enables the users to build layouts of prefabricated components on a building site in 2D. This 2D layout can then instantly be exported to a lit-up real time 3D environment in the computer game “Half-Life.” ForeSite Designer has been used in a several design events with different settings. This paper presents the tool and one project where it was utilized. The results show that ForeSite Designer can promote dialogue and collaborative design work among the participants. We have also found that it is important how the virtual environment and its components are visually designed in order to support the dialogue and collaborative design work.
keywords	collaboration, customer, real time, virtual environment
series	CAAD Futures
last changed	2003/09/22 12:21

_id	ijac20031406
id	ijac20031406
authors	Fukuda, Tomohiro; Nagahama, Ryuichiro; Kaga, Atsuko; Sasada, Tsuyoshi
year	2003
title	Collaboration Support System for City Plans or Community Designs Based on VR/CG Technology
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	This paper reports on a collaboration support system for city plans or community designs based on virtual reality (VR) or computer graphics (CG) technology. It reports on an extension to an ongoing research programme, and in particular it introduces the developments of portable VR equipment, and an expression method using CG to enable the realistic viewing of night scenes, and application to real projects.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2004_101
id	sigradi2004_101
authors	Guillermo Vásquez de Velasco de la Puente
year	2004
title	En la aplicación de pantallas interactivas de plasma en el taller de diseño [The Application of Interactive Plasma Screens in the Design Studio]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper elaborates on the use of electronic pin-ups in real-time local reviews making use of larger format interactive plasma screens. The paper briefly explains the technical aspects of an actual implementation in the College of Architecture at Texas A&M University. The main focus of the paper is placed on the use of a 61. interactive plasma screen in a graduate design studio during the second semester of 2003 and the benefits that such an implementation has reported. The narrative explains how the use of an interactive plasma screen for informal as well as formal reviews is not only saving printing resources but it is also having a very positive impact on how we conduct design reviews.
series	SIGRADI
email
last changed	2016/03/10 09:53

For more results click below: