Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 595

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20031402
id	ijac20031402
authors	Caldas, Luisa G.; Norford, Leslie K.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms: Integrating Conflicting Design Objectives in Low-Energy Architecture
source	International Journal of Architectural Computing vol. 1 - no. 4
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	caadria2003_b5-2
id	caadria2003_b5-2
authors	Caldas, Luisa G.
year	2003
title	Shape Generation Using Pareto Genetic Algorithms Integrating Conflicting Design Objectives in Low-Energy Architecture
doi	https://doi.org/10.52842/conf.caadria.2003.681
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 681-694
summary	The Generative Design System [GDS] presented in this paper was developed to assist designers in researching low-energy architecture solutions. The GDS has the capability to evolve architectural forms that are energy-efficient, while complying to design intentions expressed by the architect, and responding to conflicting objectives. To achieve this evolutionary development, the system integrates a search and optimization method [Genetic Algorithm], a building energy simulation software [DOE2.1E], and Pareto multicriteria optimization techniques. The GDS adaptively generates populations of alternative solutions, from an initial schematic layout and a set of rules and constraints designed by the architect to encode design intentions. The two conflicting objective functions considered in this paper are maximizing daylighting use, and minimizing energy consumption for conditioning the building. The GDS generated an uniformly sampled, continuous Pareto front, from which six points were visualized in terms of the proposed architectural solutions.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20031203
id	ijac20031203
authors	Heylighen, Ann; Neuckermans, Herman
year	2003
title	(Learning from Experience)? Promises, Problems and Side-effects of Case-Based Reasoning in Architectural Design
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	Learning from experience is the essence of Case-Based Reasoning (CBR). Because architects are said to learn design by experience, CBR seemed to hold great promises for their field, which inspired, in the 1990s, the development of various Case-Based Design (CBD) tools. Learning from the experience of developing and using these tools is the objective of this paper. On the one hand, the original expectations seem far from being accomplished today. Reasons for this limited success can be found at three different levels: the cognitive model underlying CBR, the implementation of this model into concrete CBD tools, and the context in which these tools are to be used. On the other hand, CBR research seems to have caused some interesting side effects, such as an increased interest in creativity and copyright, and a re-discovery of the key role that cases play in architectural design.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	c7b8
authors	Nitsche, Michael and Roudavski, Stanislav (with Penz, François and Thomas, Maureen)
year	2003
title	Drama and Context in Real-Time Virtual Environments: Use of Pre-Scripted Events as a Part of an Interactive Spatial Mediation Framework
source	TIDSE ’03 Technologies for Interactive Digital Storytelling and Entertainment, S.Goebel, N.Braun, U.Spierling, J.Dechau, H.Diener (eds.) Darmstadt, Germany, 24-26 March 2003. Fraunhofer IRB Verlag, Stuttgart, ISBN 3-8167-6276-X, pp. 296-310
summary	We suggest that the dramatically engaging mediation of an experience of place should be built in as a fundamental capability of a compelling and meaningful virtual environment (VE). Our main objective is to develop flexible interactive techniques that supply VE’s with a coherent context and make the resulting ‘virtual place’ available to the user in a dramatically engaging way. To support the concept of narrative expressive space, we propose a three-layer multi-purpose spatial mediation framework that utilizes an interactive narrative structure to coordinate stylized dramatic camera work, lighting, effects and sound. We then describe the use of pre-scripted events as a layer in this framework and explain the inherent benefits and problems, using a single-user prototype environment as illustration. The work offers guidelines for the design of VE’s to all fields that combine narrativity and spatiality, such as interactive entertainment, education and architecture.
series	other
email
more	http://www.arct.cam.ac.uk/cumis/
last changed	2003/04/17 18:57

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_272
id	acadia11_272
authors	Dimcic, Milos; Knippers, Jan
year	2011
title	Free-form Grid Shell Design Based on Genetic Algorithms
doi	https://doi.org/10.52842/conf.acadia.2011.272
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 272-277
summary	In the 21st century, as free-form design grows in popularity, grid shells are becoming a universal structural solution, enabling the conflation of structure and skin (façade) into one single element (Kolarevic 2003). This paper presents some of the results of a comprehensive research project focused on the automated design and optimization of grid structures over some predefined free form shape, with the goal of generating a stable and statically efficient structure. It shows that by combining design and FEM software in an iterative, Genetic Algorithms-based optimization process, stress and deformation in grid shell structures can be significantly reduced, material can be saved and stability enhanced.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	2006_458
id	2006_458
authors	Laskari, Iro
year	2006
title	Automatic production of paths within audiovisual “narrative space” by making use of genetic algorithms
doi	https://doi.org/10.52842/conf.ecaade.2006.458
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 458-461
summary	This paper documents the theoretical aspect of a research project that deals with the application of an artificial life (AL) approach to engraving coherent paths within the narrative space of video fragments. These paths, which are constituted by the succession of short video segments, represent the best way to juxtapose isolated elements in the overall narrative landscape. In this case the notion of space is being used in a metaphorical way. Once this has been clarified, the concept of “narrative space” is used as a metaphorical representation of a database comprising all the fragmented/autonomous narrations that are being used. Therefore, the creation of an “intelligent” system that will be able to automatically create cinematographic narration is being examined. This project in particular investigates the possibility and the consequences of producing an autonomous cinematographic narration system, in which meaning results from a kind of hypermontage (Hakola, http://www.kromaproductions.net/HYPERMONTAGE.htm: Jan 2003) conditioned by genetic algorithms. A different type of spatial experience emerges when the video fragments used are automatically “put together” by the system. Video as a medium could be considered as representing crystallized shortcuts within physical reality. Since video fragments constitute the database, different elements of constructed space are parts of the same ensemble. From the composition of such fragments, there emerge new paths within the same spatial context and certain spatial experiences are formulated which are different from the ones experienced by actors during the shootings.
keywords	Non - linear narrative; cinematic language; Artificial Life
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	745f
id	745f
authors	Bauni Hamid; Devin Defriza
year	2003
title	A Preliminary Model of Community-based Integrated Information System for Urban Spatial Development
source	Proceeding of the 3rd China Urban Housing Conference, July 3-5 2003, Center for Housing Innovations, Chinese University of Hong Kong, ISBN 962-8272-26-8, pp. 417-424
summary	This paper describes a research on building Integrated Information System for Urban Spatial Development. The objective of the research phase discussed in this paper is to define a prototype of information system that basically facilitates information communication among involved participants in an urban spatial development planning. The system is designed by putting stress on local community. Their spatial perception and the availability of GIS technology in local context become constraints in building the system. Internet becomes the main alternative for information dissemination for this phase. This is also supported by the use of web-based GIS as framework of information system. Through few socialization sessions, the proposed model has indicated a prospected alternative to be seamless communication media among participants. To support an easy-access for local people in using this information system a mechanism of information access has been proposed in the form of local information center.
keywords	information system, digital model, urban development, community, participation
series	other
type	paper session
email
last changed	2007/02/04 06:15

_id	ecaade03_397_180_bialas
id	ecaade03_397_180_bialas
authors	Bialas, Z., Glinkowska, A., Kepczynska-Walczak, A., Szrajber, R. and Urbaniak, M.
year	2003
title	The ICT as a Driving Force in The Field of Archaeological Research
doi	https://doi.org/10.52842/conf.ecaade.2003.397
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 397-402
summary	The paper is a contribution to the domain of computer tools for archaeological excavations and research. The present project described in this paper has been undertaken in close co-operation of specialists from two universities including archaeologists and architects from the CAAD unit. The project objective is to assess the suitability of new media offering an alternative to the traditional methods in archaeological practice.
keywords	Innovation; Research, Education & Practice; Integration of ICT withinarchaeological research
series	eCAADe
email
more	http://www.arch.p.lodz.pl
last changed	2022/06/07 07:52

_id	9b4d
authors	Boerner, Wolfgang
year	2003
title	The “Franziszeische Kataster” (land register) – Only a historial Map?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Franz I. of Austria that the legislative and technical hindrances were cleared away in order to commence with big changes. One cantruly say that it was due to his land tax patent from the 23rd of December 1817 that he founded the main land register of Austria andof the whole empire. The basic ideas of this patent are still valid today.This land register, named after it’s originator, was also said to be a “stabile” land register because the net profit rate, which wascrucial for the rating of taxation, was to be stabilized without giving consideration to higher productivity or diligence except to casesin which the fertility of the earth was destroyed by natural phenomenon.The land register was developed for the city of Vienna in the years 1819 to 1824. This land register of Vienna was scanned and digitized by the Urban Archaeology of Vienna. Since the launching of the “Kulturgüterkataster (Cultural Heritage Cadastre)“ in 1996, the individual municipal departments of the City of Vienna have developed a massive body of know-how regarding the various fields of interest. In particular, the inventoryingand evaluation of architectural objects as implemented by the City of Vienna could be easily adapted to other EU cities. It has alreadybeen suggested to initiate corresponding EU projects or participate in such.The long-time objective is an Internet portal. Based on the applications and competence developed in Vienna, the cultural assets of European metropolises could be digitised to present them in a novel forum. Lovers of culture, historians and urban planners would thus dispose of an instrument that renders urbanistic research much more efficient. Here, the “Franziszeischer Kataster“ could play a key role. Especially in the candidate countries in Eastern and South-eastern Europe, land surveying to this day would be unthinkable without this land register. A digital version of the register, could provide enormous support to the surveyor’s offices in the new Member States.
series	other
email
last changed	2003/11/21 15:16

_id	acadia21_100
id	acadia21_100
authors	Ghandi, Mona; Ismail, Mohamed; Blaisdell, Marcus
year	2021
title	Parasympathy
doi	https://doi.org/10.52842/conf.acadia.2021.100
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 100-109.
summary	Parasympathy is an interactive spatial experience operating as an extension of visitors’ minds. By integrating Artificial Intelligence (AI), wearable technologies, affective computing (Picard 1995; Picard 2003), and neuroscience, this project blurs the lines between the physical, digital, and biological spheres and empowers users’ brains to solicit positive changes from their spaces based on their real-time biophysical reactions and emotions. The objective is to deploy these technologies in support of the wellbeing of the community especially when related to social matters such as inclusion and social justice in our built environment. Consequently, this project places the users’ emotions at the very center of its space by performing real-time responses to the emotional state of the individuals within the space.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade03_579_06_heylighen
id	ecaade03_579_06_heylighen
authors	Heylighen, A., Ryckewaert, M. and Neuckermans, H.
year	2003
title	Yet another paper about integration?
doi	https://doi.org/10.52842/conf.ecaade.2003.579
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 579-582
summary	Confronted with the changing educational landscape, our architecture program faces the need for integration: integration of CAAD-related subjects into the curriculum, but above all integration of the curriculum as such. This inspired the idea to view ICT as an ally in tuning various courses to each other by what unites them all: the concrete architectural project. Within the scope of a two-year pilot project, we examined whether and how the use of ICT could improve the integration between a exemplary course, seminar and design studio. Despite evident links between the three, students and teachers used to consider these as separate entities. Without ignoring the individual character of each, the pilot project aimed at initiating a process of synergetic and cumulative knowledge development, whereby ICT played various roles. Across the board, the objective to stimulate a synergy among different components in the curriculum has been partially realized. Questions arise, however, as to who will take care of the extra tasks brought about by the use and maintenance of ICT after the project has ended.
keywords	Design Pedagogies
series	eCAADe
email
more	http://www.asro.kuleuven.ac.be
last changed	2022/06/07 07:50

_id	ijac20031108
id	ijac20031108
authors	Hirschberg, Urs
year	2003
title	Transparency In Information Architecture: Enabling Large Scale Creative Collaboration in Architectural Education over the Internet
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper is about networked collaboration in architectural education and about information architecture for networked collaborations. It presents results of a quantitative process analysis of two types of courses in Computer Aided Architectural Design that were taught using database-driven online environments. The main focus of the quantitative analysis is the performance of these online environments as information structures, designed to accommodate the presentation and the peer-to-peer exchange of design information for relatively large groups of between 60 and 150 participants. Using the database records to reconstruct the processes, three different quantitative analyses are described.Their results indicate that for these projects the web-environments were successful in enhancing peer-to-peer learning and that they promoted a more objective assessment of the submitted works. The study also looks at the effect that the environments themselves had on the process. Finally it draws some conclusions about these environments' information architecture: it presents tentative guidelines about how such environments must be designed to handle the dynamic display of design data, from many different authors, in a way that is transparent to the users.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ijac20031301
id	ijac20031301
authors	Levy, Adrian J.
year	2003
title	Real and Virtual Spaces Generated By Music
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	The main objective of this research work is to explore a new digital design process. This new method for the creation of spaces (referred to as Data Representation Architecture) entails the choice of any element from the everyday world, and the creation, by means of a digital a process, of either a real or a virtual space. In this particular case, the real element is music. Various melodies, some of them famous and some of them new or specially composed for the project, materialize their basic information and generate novel spaces. For each musical composition, many instruments were played, and the sound of each of them was then materialized in the final space. This is how alternative design processes are born, and a completely new architecture defined. In order to accomplish this research work, it was necessary to combine knowledge from different fields; namely, architecture, music, mathematics and computer science.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ecaade03_351_165_modeen
id	ecaade03_351_165_modeen
authors	Modeen, Thomas
year	2003
title	CADCAMing: The Use of Rapid Prototyping for the Conceptualization and Fabrication of Architecture
doi	https://doi.org/10.52842/conf.ecaade.2003.351
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 351-361
summary	The objective of the study is to suggest a methodology for fabricating designs, through the use of Rapid Prototyping, that are innate to this mode of production. It endeavors to do so by involving a more inclusive sensory spectrum as an essential ingredient in the conceptualization and realization of a design
keywords	Architecture; Design; Rapid Prototyping, Senses, Avaterial
series	eCAADe
email
last changed	2022/06/07 07:58

_id	mourshedp503final
id	mourshedp503final
authors	Monjur M Mourshed, Denis Kelliher, Marcus Keane
year	2003
title	ArDOT: A tool to optimise environmental design of buildings
source	Building Simulation 2003 (Eighth IBPSA Conference). Eindhoven, Netherlands
summary	Environmental design of buildings involves ‘finding the optimum’ solution satisfying predefined objective(s) (e.g., reduction in operating/capital cost, maximisation of daylighting etc.). A number of computer based simulation models exist to assist professionals in finding this optimum through building performance assessment. Contemporary practices involving building simulation require enormous effort to prepare input, extract output, and visualize data, which restricts designers from realizing the full potentials offered. In most cases, rules of thumb are applied and experienced guesses are made; simulation software is used only to validate the assumptions, which do not necessarily lead to the intended optimum. Moreover, these tools have been developed as simulation engines, which is inadequate to visualize the compounded and interdependent effect of a large number of design variables. The authors believe that to realize the potential offered by building simulation software, a new breed of DBSs (Decision Based Systems) is needed coupling existing simulation engines with formal optimisation methods through neutral data standards (BPM – building product models) for seamless integration. This paper first elaborates on the previous attempts at solving integration issues related to the design process and simulation; also attempts at finding the limitations. Secondly, formulation of design problems as optimisation has been discussed with reference to the different stages of design. Thirdly, for effective integration of activities among stakeholders and processes, the use of client/ server oriented building product model has been proposed to overcome the limitations of file-based prototypes. Analysis and discussions based on the above aspects form as justification for ArDOT, an Architectural Design Optimisation Tool under development at IRUSE, National University of Ireland, Cork. Combining all three aspects into one makes ArDOT unique, which is essentially an enhanced decision making tool for the design of energy efficient buildings.
keywords	ArDOT, Architectural Design Optimisation, Building Energy Simulation, EnergyPlus
series	other
email
last changed	2003/08/27 11:57

_id	1373
authors	Pfaffenbichler, Paul C. and Emberger, Günter
year	2003
title	Are European cities becoming similar?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	The paper discusses city specific development patterns to overcome todays transport problems. The results are based on recent andongoing research activities at TUW-IVV and ITS. At previous CORP-conferences, we presented the basics and the development of aplanning support tool to find optimal policy packages in urban transport and land use (Emberger, 1998), (Pfaffenbichler, Emberger, 2001). The core of this planning support tool is a dynamic land use and transport interaction model. This model, which we refer to as Sketch Planning Model (SPM), is embedded into an appraisal and optimisation framework. The SPM and this framework were developed in the recently finished European Union funded research project PROSPECTS1. Case studies with this planning supporttool were performed within PROSPECTS for the cities Edinburgh, Helsinki, Madrid, Oslo, Stockholm and Vienna. These cities are principally comparable in regards of their status (capitals and major business and education centres), but different in their size, population density, transport system etc. A set of policy instruments like public transport improvements, car traffic restrictions, and infrastructure provision was available to formulate strategies to reduce negative impacts of transport and to increase welfare. The overall objective was a sustainable development of the city. Although the instruments and the goals are similar in all investigatedcites, different solutions were adequate. The solutions vary in regard of spatial implementation, implementation time and level of implementation. The paper will highlight some reasons for the different development paths of the cities. As well the comparison of the do nothing scenario as the comparison of the most feasible policy strategies shows that European cities are different, need different solutions for their problems and will stay different in the future.
series	other
email
last changed	2003/03/11 20:39

For more results click below: