Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	c53f
authors	Dorau, U., Sanopoulos, A. and Schrenk, M.
year	2003
title	Erfahrungen und Erfolge bei der Umsetzung von RAPIS - Raum- und Projektinformationssystem für die Vienna Region [Experience and Results with the RAPS-System for the Viennese Region]
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	In shortest terms: RAPIS is a metadatabase on spatial information in the “Vienna Region”. More interesting then this simple fact is the way how theproject was implemented and what the effects on regional development are.RAPIS is the acronym for “Regional Planning and Project Information System for the Vienna Region” and was implemented as the Austrian part of the Interreg IIc Project IM-PLAN (Implementation of models for co-operative planning in metropolitan regions). The aim was to create aninformation platform for planning relevant information for the whole region, integrating existing data sources from federal and state administrationas well as private companies. RAPIS enables an overview of the available spatial datasets in the "Vienna Region " and focuses on the following questions: Which datasets relevant for planning and development are available within the region? Who can use these datasets under which conditions? Which plans and projects do exist for the region? In addition also metainformation on the most important international data sources was collected as well as information to projects and plans with regional and trans-regional impacts. During the implementation great importance was given to communication and sensitisation for the importance the topic: geo-informationinfrastructre as a key ressource for spatial development and regional co-operation. It showed up that Austria and the "Vienna Region" have a very good initial position and excellent databases on national, state, local and international level. However, it seems that almost everything exists already but hardly anybody knows about it ... – potential users do not know what data and information already exists and how to get and use it. Intensive communication, information and permanent discussion of the topic „(Geo-) Information“ within the „planners community“ carried the topic into the public and strengthened the consciousness for the importance of information-infrastructure for regional co-operation.
series	other
email
last changed	2003/03/11 20:39

_id	ijac20031108
id	ijac20031108
authors	Hirschberg, Urs
year	2003
title	Transparency In Information Architecture: Enabling Large Scale Creative Collaboration in Architectural Education over the Internet
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	This paper is about networked collaboration in architectural education and about information architecture for networked collaborations. It presents results of a quantitative process analysis of two types of courses in Computer Aided Architectural Design that were taught using database-driven online environments. The main focus of the quantitative analysis is the performance of these online environments as information structures, designed to accommodate the presentation and the peer-to-peer exchange of design information for relatively large groups of between 60 and 150 participants. Using the database records to reconstruct the processes, three different quantitative analyses are described.Their results indicate that for these projects the web-environments were successful in enhancing peer-to-peer learning and that they promoted a more objective assessment of the submitted works. The study also looks at the effect that the environments themselves had on the process. Finally it draws some conclusions about these environments' information architecture: it presents tentative guidelines about how such environments must be designed to handle the dynamic display of design data, from many different authors, in a way that is transparent to the users.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	1404
id	1404
authors	Hosny, Samir Sadek
year	2003
title	BUIL-D-EX; A Knowledge-Based Expert System for the Diagnosis of Buildings Cracks
source	Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 38, No. 2, June 2003 - pp. 297-310
summary	Expert systems are computer systems developed to preserve the human expertise about specific domains in a well-structured form suitable for retrieval and manipulation by computers. They have been used in many fields of applications and proved to be beneficial. This paper addresses the role of Knowledge-based expert systems in building construction; particularly in the diagnostics and assessment of buildings' cracks. The paper presents BUIL-D-EX; a prototype for a Buildings’ Diagnostics Expert system intended to assist architects, structural engineers, contractors and even building owners in identifying and suggesting remedies to concrete and masonry surfaces' defects. The system identifies the kind of crack, states its most probable causes and its degree of danger, suggests a technical remedy and finally suggests several commercial names for materials to be used for curing the defect, and how to apply them. BUIL-D-EX offers complete explanations for all its questions to the users, as well as justifications for all its decisions and answers whenever needed.
keywords	Expert Systems, Diagnosis, Building Construction, Building Cracks, Backward chaining, Inference, Reasoning
series	journal paper
type	normal paper
email
last changed	2009/09/12 17:18

_id	ecaade03_627_98_bailey
id	ecaade03_627_98_bailey
authors	Bailey, Rohan
year	2003
title	The Student, The Master and The Computer
doi	https://doi.org/10.52842/conf.ecaade.2003.627
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 627-630
summary	Architectural education has often been criticised for producing students that seem to lack the practical knowledge needed to create architecture that is fit for purpose, safe and a delight to users. Unfortunately, owing to the complexities of society, technology, practice and academia, design teachers are struggling to balance the teaching of basic practical concerns for making architecture with teaching students how to think critically and abstractly. This paper suggests a resolution that places the computer at the center of the relationship between student and tutor. It suggests a digital teaching tool that detects and interprets the marks students make when sketching. The digital design coach then presents the student with related issues allowing a comprehensive reading of the digital sketch. The student, more aware of the issues involved, engages in more intelligent and wellinformed dialogue with tutor.
keywords	Digital Sketching; Design Education; Design Computing
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f8f7
id	f8f7
authors	Bhzad Sidawi
year	2003
title	The pattern of Internet use for information management by architectural practices in the UK
source	Cardiff University, Welsh School of Architecture Cardiff, UK
summary	In recent history, architects have experienced problems related to the use and management of new innovations. The Internet presents one such challenge. It offers considerable expansion in types of communication and sources of business information and connects people and businesses around the globe. As is argued in this research, these services could play a positive role in architectural practice. This research examines the use of the Internet by architectural practices in UK in order to reveal how aware they are of the opportunities it presents, the extent to which they are taking advantage of them, and the problems they are experiencing. A field study was conducted of two types of practices: RIBA private practices and local authority practices. A number of research tools were used to inspect how these practices are using the Internet to manage various types of information that used and produced in the practice, namely: the acquisition of web information, the exchange of the practice’s information through the web and the presentation of the practice’s information on the web. Explanations for the results were sought by correlating variables from the questionnaire study, using simple statistical tests. The field study shows that many Internet services are unpopular among architects, and that practices have problems in adopting and using the technology. The pace at which the Internet is being absorbed and accepted by practices is slow. The study suggests that possible causes are: the little knowledge of users’ about IT, the poor resources of the practice, and old or imperfect Internet installations and the absence of the Internet support to the architect’s activities. The research argues that there are a number of links between these negative factors which make the practice unable to utilize the Internet and to manage the practice’s information through the Internet. To break these links, the research suggests that practices should adopt a specific management strategy to promote more utilization of Internet services in the office and to manage information. Practices need to make certain changes to the way they manage the Internet and work with it, if they plan to integrate the Internet more successfully into their practice. The research discusses techniques for improving practice management which would help practices to digest Internet technology and to use it more effectively in the practice.
keywords	Internet, Architectural practices, Information management, Communications
series	thesis:PhD
type	normal paper
email
last changed	2006/11/03 23:29

_id	ea0f
authors	El Araby, Mostafa and Okiel, Ahmed
year	2003
title	The Use of Virtual Reality in Urban Design: Enhancing the Image of Al-Ain City, UAE
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	This study aims at exploring the rapid growth of the use of Virtual Reality techniques in the field of Urban Design with application to the Al-Ain City. Currently, Virtual Reality and Virtual Environments are the most growing fields of information technology and have a great media attention. There is evidence to suggest that the use of such technology will enhance conceivable image of any proposed project at any urban setting for users, designers and clients. Therefore, city officials and administrators (clients) and the public (users) can reach better decisions regarding proposed projects within their towns and cities. Because of the limited time and resources, this study examines the visual quality of Downtown Al Ain, UAE, specifically, the Khalifa street (major shopping street). A basic VRmodel to the street was constructed. Modifications to the basic model were made to examine how changes in buildings’ heights and street vegetation affect the visual quality of the street. Results of this study showed that urban visualization is proving to be a valuable tool for designers and planners. Increasing the heights of buildings in the mid-street and on the edges, along with enforcing distinctive architectural styles for the proposed buildings will enhance the overall quality of the street. Furthermore, decreasing the intensity of current vegetation and tree heights will increase the imaginable quality of the street. Nevertheless, the built of a comprehend VR model needs more time, resources and facilities that were not available to this study. This model, if completed, tothe whole downtown area can be used both to identify existing problems and to quickly evaluate alternative solutions to those problems.
series	other
email
last changed	2003/03/11 20:39

_id	cf2003_m_005
id	cf2003_m_005
authors	FISCHER, T., BURRY, M. and FRAZER, J.
year	2003
title	How to Plant a Subway System
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 403-412
summary	We speculate on a possible CAAD future that deploys and extends paradigms of natural growth and cellular development to an extent that would allow the planting and growth of man-made structures. This approach is based on the translation and expression of digital data structures into artificial physical form and the building of structures by decentral means. In such a scenario, generative and evolutionary architecture could seamlessly blend into building construction. As a discussion of as yet unavailable future technologies and methodologies the proposed remains at a “sketchy” level and must largely limit itself to preliminary and speculative considerations. In order to restrain the scope of this paper to the area of building design and construction, we focus on subway development and discuss possible cellular approaches to this particular field emphasizing aspects of functional aesthetics. We encourage the reader to take this example as a point of departure only, to generalise our explanations and to apply them to other building types. We support our discussion with findings made in software simulations of humandesigned cellular growth processes.
keywords	cellular, evolutionary, morphogenesis, subway
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	cf2003_m_097
id	cf2003_m_097
authors	FRÖST, Peter
year	2003
title	A Real Time 3D Environment for Collaborative Design
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 203-212
summary	By setting up collaborative design processes in architecture it is possible to considerably improve the integration of customer needs and ideas into the programming phase of a building project. Our design process includes active collaboration between customers, users and other stakeholders as well as the use of virtual environments in conceptual design. The output from the process is treated as visualised input to the architectural programming. The work presented focuses on developing digital tools to support this collaborative design dialogue. We have developed an extremely “easy to use” digital modelling tool called “ForeSite Designer”. The tool enables the users to build layouts of prefabricated components on a building site in 2D. This 2D layout can then instantly be exported to a lit-up real time 3D environment in the computer game “Half-Life.” ForeSite Designer has been used in a several design events with different settings. This paper presents the tool and one project where it was utilized. The results show that ForeSite Designer can promote dialogue and collaborative design work among the participants. We have also found that it is important how the virtual environment and its components are visually designed in order to support the dialogue and collaborative design work.
keywords	collaboration, customer, real time, virtual environment
series	CAAD Futures
last changed	2003/09/22 12:21

_id	heyhlighenijdc2003
id	HeyhlighenIJDC2003
authors	Heylighen, Ann and Segers, Nicole
year	2003
title	Look Who's Suggesting
source	International Journal of Design Computing, 2003, Volume 6
summary	During design architects do not only sketch, they combine different kinds of information and representations. The combination of text, image, sketch and/or draft can provoke new associations that keep the design process going. The sketchbook presented here enables architects to use all representations simultaneously, so as to fully exploit their cross-fertilisation. More importantly, it steadily makes suggestions for continuing development of design ideas. These suggestions can take the form of words that are semantically related to the users’ ideas, or of images showing how other architects have developed related ideas into built artefacts. To this end, the sketchbook captures all information the architect/user puts ‘on paper’ and forwards it to a design idea recorder/interpreter called Idea Space System (ISS). In trying to understand the user’s ideas, ISS places all elements captured into a gigantic network, as if part of the frame of reference is made explicit. In the network nodes are words, sketches or images, while links represent relations of various origins. The semantic relations that ISS identifies are shown to the user. At the same time, words are processed as search criteria in DYNAMO, a growing architectural case base, to detect and display design projects that exemplify related ideas. Through the explicit links between early ideas and concrete design cases, the sketchbook acts as a permanent source of inspiration, while stimulating both architects’ creativity and their awareness of the downstream implications of design ideas.
series	journal paper
email
more	http://www.arch.usyd.edu.au/kcdc/journal/vol6/
last changed	2004/03/25 17:51

_id	acadia03_001
id	acadia03_001
authors	Jabi, Wassim
year	2003
title	Digital Design
doi	https://doi.org/10.52842/conf.acadia.2003.x.a7r
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 16
summary	Describing design as a sequence of steps cannot convey the complexity of social interactions that it embodies. Design is not merely a process, but a co-evolution of efforts and events in various places and times—both synchronous and asynchronous. Designers share their values, effort and expertise within design settings via artifacts that further the design process. Increasingly, these design settings in academia, research, and professional practice combine physical and virtual modalities such as immersion, projection, and a range of interaction technologies. Peter Anders has described such spaces as cybrids: hybrids that integrate virtual and physical space. In these settings, designers use overlapping physical and virtual artifacts and tools to arrive at a co-operative design resolution. Within collaborative design, these artifacts take on an additional role. As embodiments of design ideas and actions, they become media for communication. Donald Schon asserts that design should be considered a form of making, rather than primarily a form of problem solving, information processing or research. Indeed the line separating creation from design is becoming increasingly blurred. For the design artifact itself may become a part of the design proposal—its virtual presence incorporated within a cybrid structure or object. We may in the future see a proliferation of cybrid settings that support collaborative, digital design. The technologies for this already exist in collaborative tools, networked computing, scanning and immersive media. However, it will take a creative vision to see how these disparate tools and devices can integrate within the ideal design setting.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade2014_147
id	ecaade2014_147
authors	James Charlton and Markus Brune
year	2014
title	Towards a dynamic evacuation system: developing methodologies to simulate the evacuation capabilities of subway stations in response to a terrorist attack with CBRNE weapons
doi	https://doi.org/10.52842/conf.ecaade.2014.1.109
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 109-118
summary	Events in recent times have highlighted the vulnerability of underground public transportation to possible terrorist attacks. A key question therefore is how an evacuation can be accomplished from underground stations safely. The strategy “go up and take the nearest exit to the surface” might not be the best response. Evidence from the Daegu subway station fire in 2003, investigated by Tsujimoto (2003) and Jeon and Hong (2009) establish that smoke or toxic airborne substances from a terrorist attack tend to use the same direct routes used by the fleeing passengers and as result significant injuries or fatalities can occur. This study proposes the concept of a dynamic evacuation system which would guide subway users along safe routes. To test how this system may operate, the study discussed combines measurements from tracer gas experiments with climate measurements to establish how toxic agents spread in subway stations under certain conditions and combines these results with those from pedestrian simulations applied to calculate evacuation times for possible escape routes. By integrating the resulting dataset from these methods, an evidence base of how a dynamic evacuation system may work can start to form.
wos	WOS:000361384700010
keywords	Pedestrian simulation, subway climatology; cbrne; subway evacuation; tracer gas experiments
series	eCAADe
email
last changed	2022/06/07 07:52

_id	4c01
authors	Laranjeira, Teresa
year	2003
title	The S. Pedro da Cova Community Knowledge Centre, a local example of empowerment through technology
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	S. Pedro da Cova (Gondomar), located ten kilometres from the city centre of Porto (Portugal), is considerate a depressed territory, with a large spectrum of social, economic and urban problems, but also with local positive aspects capable to reach the different development opportunities.In the ambit of the regeneration process for this area, the local authority draw a strategy based in the empowerment of the citizens, where the Information Communication Technologies (ICT’s) assumed a major role. With this purpose, it was intended to build a Community Technology Centre for the disfavoured children. From the building construction till the first activities, it is our conviction that to break the differences between the have and the have not’s it will be very important to conciliate the new technologies and the local characteristics. The children will be the active agents in the dissemination of the project through the development of the different activities, sensitising the families to adopt a healthy life and announce situations of risk, for example. To validate the project will be created an permanent observatory that propose a moment of reflection and auto-valuation about the evolution of the different activities, thechanges to do, and the identification of new problems and the redefinition of new methodologies. The aim of the article is not only to show the positive aspects, indeed significant, but also to bring into discussion some questions; in order to understand the possibility of defining an empowerment strategy based in the ICT’s. How to conciliate the individualperspectives of the future into a common objective? How to show to all community that information and knowledge are fundamentalto build a more liveable and equity neighbourhood? How to transfer the results to a larger strategy for the entire city? And, at theend, how to explain that people is the most important "infrastructure" to build a better future?
keywords	Social Exclusion; Informal Urban Structure; Empowerment; Spaces of Knowledge
series	other
email
last changed	2003/03/11 20:39

_id	cf2003_m_079
id	cf2003_m_079
authors	PETRIC, J., CONTI, G. and UCELLI, G.
year	2003
title	Designing within Virtual Worlds
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 213-224
summary	This paper celebrates the successful outcome of a trial of an innovative multi-platform distributed design decision support system in which the shared design environment exists within the virtual world. The outcome is the result of a sustained three-year research and development effort, within an internationally recognised research group. The project set itself a number of ambitious targets within the broad spectrum of distributed design decision support, viz: • A multi-platform environment: the trial demonstrates inter-operability of different machine platforms - from a home PC to an international standard Virtual Reality Centre. • A distributed environment: the trial demonstrates the high level of understanding amongst the design team separated by time and space. • An ability to propose, discuss and agree upon, design decision from within the virtual world. Hitherto, virtual environments were viewing galleries; designers had to leave them to effect design changes in a conventional CAD package. The trial described in the paper amply demonstrates the potential to design, collaboratively and, in distributed mode, from within the virtual world. The two ideas upon which the system (known as JCAD-VR) is built are: • That all the users present in the virtual world have to be able to share the same virtual environment in a "transparent fashion"; • The user interface, instead of the traditional menu/windows based layout, is part of the virtual world itself. Any element of the interface becomes an object belonging to the 3D world and therefore it is treated as any other object. Each element of the interface can then be moved or scaled according to the user’s needs. The entire project is based on client-server architecture where every user logs into a virtual world and starts sharing design tasks with other users. The authors propose to present a video which demonstrates the positive outcome of the trials to date. More importantly, perhaps, the authors will put the achievements of the R+D into the context of past aspirations and developments in the subject area and, most importantly of all, suggest how these modest achievements will impact on the next decade of increasingly rapid R+D.
keywords	collaboration, distributed design, interface, virtual environment
series	CAAD Futures
email
last changed	2003/09/22 12:21

_id	acadia03_025
id	acadia03_025
authors	Serriano, Pierluigi
year	2003
title	Form Follows Software
doi	https://doi.org/10.52842/conf.acadia.2003.185
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 185-205
summary	Software selection affects design outcome. Computer applications externalize in their graphical interface and in their internal logic a set of assumptions about how objects are constructed and space is represented. Accessibility of tools is in direct correlation with their rate of use. Depending on how user-friendly particular functions are, their use will appear with higher frequency than those foreign to the technological frames of the user groups for which software is designed. As each software is geared towards the needs of specific communities, it replicates in digital fashion those disciplinary practices already present in the analog world. However, modeling results are bracketed at its inception the very moment a particular 3D package is chosen from a diverse array of digital offerings. If the application adopted is designed to appeal to the computer animation industry, the modeling results will bear the imprint of those organic qualities: buildings will appear character-like. Since computer programs have built-in slant meant to aid disciplinary specific users, they yield families of designs with formal commonalities. Unquestionably, proficiency of software use also broadens inventiveness of design. Nevertheless some applications make particular transformations harder to achieve, and as a result will be likely to exclude those modeling options from architects’ imaginary world.
keywords	modeling options, built-in slants, form-making, technology of orders.
series	ACADIA
last changed	2022/06/07 07:57

_id	acadia03_037
id	acadia03_037
authors	Anders, Peter
year	2003
title	Cynergies: Technologies that Hybridize Physical and Cyberspaces
doi	https://doi.org/10.52842/conf.acadia.2003.289
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 289-297
summary	This paper presents ways in which cybrids depend for their technology upon three existing models of architectural hybrid: display space, environmental computing, and augmented/mixed reality. Cybrids bring these techniques together into a synergistic whole that depends as much on the observer for its consistency as it does on its comprising technologies. This synergy is a product of corroborative behavior between different modes, which provide cybrid users with a coherent social/spatial experience. The paper notes cybrids’ similarity to theater, not only for their technological dependency, but also for the tacit yet vital role of the observer in their effect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2003_004
id	sigradi2003_004
authors	Barros, Diana Rodríguez
year	2003
title	Hipermedios, metanodos y lógicas de cierre (Hypermedia, metanodes and logic of closure)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The present work is a contribution for the construction of a theorical perspective on the presence of metanodes and closing strategies in hypermedia readings about architecture and design. It particularly aims at describing, explaining and predicting these phenomena in relation to the positive attitudes they generate in processess of meaning construction and cognitive overflow. The results obtained are expected to help in producing guidelines and implications to be considered when systematizing the analysis and design of hypermedia on architecture and the city. It is part of the studies being currently carried out at the CEAC Center about hypermedia readings of urban fragments by non-expert users. (Project 15/B1001)
keywords	Hypermedia, design, metanodes, closing strategies
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia21_100
id	acadia21_100
authors	Ghandi, Mona; Ismail, Mohamed; Blaisdell, Marcus
year	2021
title	Parasympathy
doi	https://doi.org/10.52842/conf.acadia.2021.100
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 100-109.
summary	Parasympathy is an interactive spatial experience operating as an extension of visitors’ minds. By integrating Artificial Intelligence (AI), wearable technologies, affective computing (Picard 1995; Picard 2003), and neuroscience, this project blurs the lines between the physical, digital, and biological spheres and empowers users’ brains to solicit positive changes from their spaces based on their real-time biophysical reactions and emotions. The objective is to deploy these technologies in support of the wellbeing of the community especially when related to social matters such as inclusion and social justice in our built environment. Consequently, this project places the users’ emotions at the very center of its space by performing real-time responses to the emotional state of the individuals within the space.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	heylighenieee2003
id	HeylighenIEEE2003
authors	Heylighen, A., Neuckermans, H. and Morisse, P.
year	2003
title	What You See is What You Get
source	IEEE Multimedia, July-Sept 2003, Vol. 10, No. 3, pp. 48-56
summary	As the amount of visual information stored on electronic media grows, the need for appropriate access mechanisms becomes more critical. Information system developers in fields as varied as agriculture, medicine, and security must not only create systems to represent, store, and process visual content, but also re-examine the indexing procedure and conceive interfaces that make visual information easily accessible. Architectural design, a field overrun by myriad case libraries, manifests this challenge. Cases – specific designs from the past – are a significant source of knowledge in the architectural design field. Using current information technologies, researchers in this field have created a variety of multimedia case collections, storing them on CD-ROM, local networks, and the Internet. Several tools for accessing case collections exist; however most rely on verbal descriptions to index cases. For the collections to support architects during design, cases should not only be represented visually, but should also be accessible through a visual medium. We’ve developed a working prototype of a visual indexing and access mechanism that uses visual keys – small pictogram-like icons expressing an architectural feature. Users can consult an online case base using these keys or create new keys to label and link cases. A pilot study, in which student and professional architects used and evaluated the prototype, supports the need for such a mechanism.
series	journal paper
email
last changed	2004/03/25 17:55

_id	caadria2003_a5-2
id	caadria2003_a5-2
authors	Kang, J.H., Park, J. G. and Lho, B.-Ch.
year	2003
title	XML-Based Interactive 3D Campus Map
doi	https://doi.org/10.52842/conf.caadria.2003.631
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 631-640
summary	This paper presents the development of a prototype XMLbased 3D campus map using the 3D VML library. Many universities in the U.S. use two-dimensional (2D) raster image to provide the campus map along with additional building information on their Web site. Research shows that three-dimensional (3D) expression of the 3D objects helps human beings understand the spatial relationship between the objects. Some universities use 3D campus maps to help visitors more intuitively access the building information. However, these 3D campus maps are usually created using raster images. The users cannot change the view point in the 3D campus map for better understanding of the arrangement of the campus. If the users can navigate around in the 3D campus map, they may be able to locate the building of their interest more intuitively. This paper introduces emerging Web technologies that deliver 3D vector graphics on the Web browser over the internet, and the algorithm of the prototype XML-based 3D campus map. Some advantages of using VML in delivering the interactive 3D campus map are also discussed.
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: