Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2004_110
id	sigradi2004_110
authors	Eliane Schlemmer; Luciana Backes; Aline Andrioli; Carine Barcellos Duarte
year	2004
title	Awsinos: Construção de um mundo virtual [Awsinos: Construction of a Virtual World]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The course Alternatives of Design is part of an integral viewpoint that aims to prepare architects from the Master Studies Department in Computing in Architecture (LUZ), in two ways: first, by expanding their perspective about potentialities of using new digital technologies in architecture, and second, by qualifying them to apply this acquired theoretical knowledge in their professional environment. The objectives of this paper are to describe the program of this course and to show products (2003), from the introductory to the final presentation of Virtual Museums of Interactive Sculptures, orientated and supervised both at site and at a distance through the Internet. As a result of this experience, a sample was obtained of virtual museums. design and modelling that illustrates what could be understood as virtual architecture with high degree of interaction, looking for the evolution, motivation and teamwork to incorporate virtual reality non-inmersive technologies in this new architectonic approach.
keywords	VRML, virtual museums, interactive sculptures, alternatives of design
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	e962
authors	Hesina, Gerd and Tobler, Robert F.
year	2003
title	Secure and Fast Urban Visualization
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Due to the rising interest in urban visualization, a number of issues have emerged that need to be solved for practical application. The most prominent of these issues are: visualization performance and security. Visualization speed concerns the usability of urban visualization. In order to make urban visualization practical, it is necessary to completely hide all latency of loading data. Here we will demonstrate techniques like multi-threading, different rendering methods and level-of-detail that our platform uses to maintain interactive frame-rates in the face of the large amounts of data that are common in urban visualization environments. The secondissue, securing the geometry and image information contained in an urban model is of eminent importance for the owner of the data. We will point out a number of techniques that have been incorporated in our viewing platform in order to maintain a high level of data security: data compression and encryption, obfuscation of access keys, compression and encryption of executables. While perfect security is an unattainable goal, the multi-staged approach of security in our system significantly raises the cost of illegally obtaining access to the geometry or image data. By demonstrating solutions for both issues our framework serves as a viable platform for urban visualization.
series	other
email
last changed	2003/03/11 20:39

_id	caadria2003_c5-1
id	caadria2003_c5-1
authors	Hoon, M. , Jabi, W. and Goldman, G.
year	2003
title	Immersion, Interaction, and Collaboration In Architectural Design Using Gaming Engines
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 721-738
doi	https://doi.org/10.52842/conf.caadria.2003.721
summary	"This paper investigates the role of gaming engines in the architectural design process through the introduction of features such as immersion, interaction and collaboration. While traditional 3D modelling and visualization systems such as 3D Studio MAX and form?Z offer increasingly convincing visual simulations, gaming engines are approaching the visual realism of such systems and are offering additional interactive features that are usually available only in more expensive immersive virtual reality systems . Additionally, the capability to have multiple individuals inhabit and navigate the space offers unique opportunities for collaboration as well as the investigation of human behaviour. Participants with internet access can be invited to access a shared virtual environment. Collaboration among users can be further enhanced by combining immersive navigation with peer-to-peer instant messaging and/or adding a voice channel. This paper analyzes these issues through research summary and the creation and user testing of a prototype based on a publicly available gaming engine. Through a series of assignments within an academic course, students in the school of architecture were asked to iteratively use and test this prototype for the collaborative exploration of designed environments. Students made their environments available for others to navigate in real-time and offer comments. A final design review was conducted in which critics were asked to enter the designed environment, explore it at will and interact with the student as well as others present in the same virtual space. This paper will illustrate some of the student projects and describe the immersive,"
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	6648
authors	Issa, Rajaa
year	2003
title	Cellular Texture Generator for Architectural Models
source	University of Texas at Arlington, Department of Computer Science and Engineering
summary	Cellular materials are used extensively in architectural settings. These materials usually have well defined geometry such as brick, stone and tiles. Patterns created with cellular materials are mostly the product of an intuitive design process that goes through cycles of synthesis and reflection until reaching final solution. Therefore interactivity is critical to intuitive designs. This paper presents a system that enables interactive creation of 3D cellular textures. It recognizes critical design areas that can have special design consideration such as edges. The system makes use of existing graphic engines and provides an intuitive interface to create patterns interactively. Rendering time is also considered through defining multiple levels of details for cells so it looks convincing in different scales. The paper presents results with an implementation of cellular texture generation system. It also shows some examples of brick walls generated with this implementation.
series	thesis:MSc
email
last changed	2003/04/25 07:20

_id	acadia03_037
id	acadia03_037
authors	Anders, Peter
year	2003
title	Cynergies: Technologies that Hybridize Physical and Cyberspaces
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 289-297
doi	https://doi.org/10.52842/conf.acadia.2003.289
summary	This paper presents ways in which cybrids depend for their technology upon three existing models of architectural hybrid: display space, environmental computing, and augmented/mixed reality. Cybrids bring these techniques together into a synergistic whole that depends as much on the observer for its consistency as it does on its comprising technologies. This synergy is a product of corroborative behavior between different modes, which provide cybrid users with a coherent social/spatial experience. The paper notes cybrids’ similarity to theater, not only for their technological dependency, but also for the tacit yet vital role of the observer in their effect.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade03_433_208_froehlich
id	ecaade03_433_208_froehlich
authors	Fröhlich, C., Hirschberg, U., Frühwirth, M. and Wondra, W.
year	2003
title	no_LAb__in_feld - Is common- ground a word or just a sound? (Lou Reed, 1989)
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 433-436
doi	https://doi.org/10.52842/conf.ecaade.2003.433
summary	This paper describes the concept and the current state of development of a new laboratory for digital experimentation in architectural education and research. The novel forms of collaboration and learning for which it is intended and the quick pace of innovation in digital technology on which it depends both require an appropriately flexible spatial and technological framework. And it requires a particular mindset. The no_LAb__in_feld is not just another laboratory. It is a place, a community, a high-tech construction site, a permanent work in progress. It is the prototype of a next generation design studio.
keywords	Design studio education: creative collaboration; digital playground; hybridinteractive installations; augmented reality
series	eCAADe
email
more	http://ikg.tugraz.at/
last changed	2022/06/07 07:50

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	acadia03_031
id	acadia03_031
authors	Paolo Fiamma
year	2003
title	Architectural Design and Digital Paradigm: from Renaissance Models to Digital Architecture
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 247-253
doi	https://doi.org/10.52842/conf.acadia.2003.247
summary	Means of expression have always affected our ways of thinking. Designers, who have to interpret signs, languages, and evolution in order to translate into an organised “form” the recurring problems and values of mankind, have left thoughts, projects and wishes to the study of representational techniques. In this way, they have also disclosed a unique view of reality and at the same time a “way of being” towards the meaning of design itself. In the relationship between architecture and representational techniques, Brunelleschi said that “perspicere” was no longer just the science of optics, but also the science that contained the lines of research on geometry and shape that he was the first to exploit in design. Centuries later, in the axonometric representation advocated by De Stijl and intended for factories and industries, the object, shown in all its parts, easy to reconstruct even in the space to which it referred, revealed with extreme clarity the mass-production building and assembly materials and systems. Digital representational media make a great entrance in the heuristic process, invalidate all signs, and promote its quality. The result is an ever-changing, computerised architecture, dominated by curvilinear, wavy shapes that flow from a generative process made of the deformations, additions, and interference of different volumes.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2003_090
id	sigradi2003_090
authors	Espina, Jane
year	2003
title	Ciudades Tradicionales Vs. Ciudades Digitales (Traditional Cities Vs Digital Cities)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This work presents the creation of a Documentary City which has 3D models of buildings and actualized urban spaces, related to a systematic information and hypermediatical, through the use of a Data Base as a digital tool for the construction of a Data Bank, which will be part of the Digital City of Maracaibo and it could be requested on a physical approach or distance way using digital technologies. The virtual reconstruction and documented part of the history of the city and the records of buildings in different historical growing moments of Maracaibo City, since its foundation until now, will permit recover part of the lost memories of the city. This research will constitute a unpublished experience in Venezuela and belong to the Hypermediatical Model of Maracaibo City of the Institute of Architectonical Research of the Faculty of Architecture and Design in the Universidad del Zulia.
keywords	Data base, tridimensional models, multimedia, digital city, urban spaces.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade03_369_112_akgun
id	ecaade03_369_112_akgun
authors	Akgun, Yenal
year	2003
title	An Interactive Database (HizmO) for Reconstructing Lost Modernist Izmir:
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 369-372
doi	https://doi.org/10.52842/conf.ecaade.2003.369
summary	The research project in progress in the School of Architecture at the Izmir Institute of Technology includes documentation and reconstruction (by 3D modeling in electronic media) of damaged and lost early modern buildings in the Izmir region. The research aims to analyze the differences between Izmir modern buildings and Universal Modern Style, and preserve information on architectural heritage for future generations. The project is at the phase of developing an interactive web-based historical database (HizmO) that includes data (information, images, technical drawings, VRML models) and visualization of the findings. This database aims to be a pioneer in Mediterranean Region for exhibition of relations between traditional architecture (especially Mediterranean locality) and modernism, and organization of a network and off-campus learning activity for Mediterranean architecture that serve as a guide for students, researchers and architects. This paper aims at introducing this research and discussing the application of the database “HizmO,” its aims and potential effects on education in architectural history.
keywords	E-learning, educational database, architectural history, VRML
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2003_a4-1
id	caadria2003_a4-1
authors	Chen, Jia-Yih Joy and Jeng, Taysheng
year	2003
title	Exploring Digital City With Physical Interactions
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 505-512
doi	https://doi.org/10.52842/conf.caadria.2003.505
summary	The purpose of this work is to develop needed interaction techniques for understanding the context of a digital city. In this paper, we present a framework in terms of three perspectives: information representation, physical interactions and media space design. We implement tangible media for physical interactions, allowing users to explore a digital city with respect to different positions in time-space in an interactive and intuitive manner. The time-space representation is mapped to physical media space. Our work is demonstrated in a digital 3D museum project for Tainan city in Taiwan.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade03_195_52_delic
id	ecaade03_195_52_delic
authors	Delic, Alenka and Kincl, Branko
year	2003
title	Architecture of the virtual in housing
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 195-198
doi	https://doi.org/10.52842/conf.ecaade.2003.195
summary	Information and communication technologies (ICT) have brought about a revolution in architecture and urban planning; they are transforming learning and practice and presenting new challenges in our understanding of space, place and society. An entirely new world of architectural expression and experiment is opening up to us. At Faculty of Architecture in Zagreb a new optional course, Virtuality in Housing Architecture, has been proposed and is being taught for the first time. Subjects cover a wide area of use of ICT in housing architecture: research into the role of the computer in architecture as a creative discipline; encouragement of new challenges to the concept of the role of digital media in housing architecture through research of digital concepts such as computerization, information, electronic media, virtuality and cyberspace; themes related to development of intelligent environment and spaces, interactive buildings, virtual reality and cyberspace as directions of development. In our work we try to implement the method of e-learning, teamwork, communication and design through the Internet. Through experimental projects and research of new housing concepts, students create a basis for discussions on theoretical and practical solutions for the housing of the future, create new ways of presentation and open new fields of research. We shall here present the experience from our work.
keywords	ICT, housing, virtuality, teamwork, e-learning
series	eCAADe
email
more	http://kdvlab6.arhitekt.hr
last changed	2022/06/07 07:55

_id	acadia03_045
id	acadia03_045
authors	Hoon, Michael and Kehoe, Michael
year	2003
title	Enhancing Architectural Communication with Gaming Engines
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 349-355
doi	https://doi.org/10.52842/conf.acadia.2003.349
summary	This paper makes a case for exploring the feasibility of utilizing the advanced graphics and sound systems of contemporary gaming engines to promote architecturally relevant work. Gaming engines, while developed largely for the PC entertainment industry, have vast potential for application in architecture. This paper will explore the depth of this potential and will outline work demonstrating the advantages and the limitations of this technology. The supporting research and observations examine the technology and reveal its potential usefulness as an instructional or depictive authoring tool. Game engines were selected that had appropriate graphical prowess, but were customizable as to allow the removal of game-specific features (to create a “professional” user interface). Projects were authored that expressed complex building details using the engine for visual depiction. The details, which included constructional components, structural assemblies, or simple design nuances, were modeled with 3D geometry and realistically textured and lighted. The game engine allowed one user or many remote simultaneous users in the virtual environment to interactively explore the presentation in real time. Scripts were developed to encourage end-users to interactively disassemble or reassemble building components as desired. Audile and/or text-based information regarding the assembly sequence were provided by exploiting the game interface features. Furthermore, interactive object scaling was provided to facilitate analysis of component relationships.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	ijac20031202
id	ijac20031202
authors	Jeng, Taysheng; Lee, Chia-Hsun
year	2003
title	Tangible Design Media: Toward An Interactive CAD Platform
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	This paper presents an interactive CAD platform that uses a tangible user interface to visualize and modify 3D geometry through manipulation of physical artifacts.The tangible user interface attempts to move away from the commonly used non-intuitive desktop CAD environment to a 3D CAD environment that more accurately mimics traditional desktop drawing and pin-up situations. An important goal is to reduce the apparent complexity of CAD user interfaces and reduce the cognitive load on designers. Opportunities for extending tangible design media toward an interactive CAD platform are discussed.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2003_m_096
id	cf2003_m_096
authors	KOCATURK, T., VELTKAMP, M. and TUNCER, B.
year	2003
title	Exploration of Interrelationships between Digital Design and Production Processes of Free-form Complex Surfaces in a Web-Based Database
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 445-454
summary	The intention of this paper is to examine the mutual influences of initial architectural, structural and digital manufacturing related decisions on the evolution of free-form structures. A survey on current applications will be presented to lay the foundation for the examination of new production techniques and structural concerns for the computer generated expressive forms. Finally, the paper will describe an interactive web-based database project which aims to establish a grammar on the mutual influences of architectural, structural and production related features of free-forms. Based on the built examples of blob structures, the database serves as a catalogue of possibilities related to form, and facilitate assessment of the impact of the early choices on the free-form building design and development.
keywords	conceptual, free-form, web-based database
series	CAAD Futures
email
last changed	2004/01/15 11:41

_id	sigradi2003_025
id	sigradi2003_025
authors	Montagu, Arturo F.
year	2003
title	Desarrollo de un Espacio Urbano de Comunicación Dinámico e Interactivo (Development of an Urban Space of Dynamic and Interactive Comunication)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In the last years some central urban places of the city of Buenos Aires has been transformed into a dynamic space of human interaction due to all kind of massive demonstrations that could be from artistic parades to massive protest against the economic policy. The Mayo Square and the Mayo Avenue are the main places for this demonstrations. The paper is concern with various digital techniques that could improve the communication among the different groups.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

For more results click below: