Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 575

Reformat results as: short short into frame detailed detailed into frame

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	acadia03_015
id	acadia03_015
authors	Bernhardt, Matthew and Blostein, Beth
year	2003
title	APPROPRIATE LEVELS OF ACCESS: AN EMPIRICAL STUDY ON THE AVAILABILITY OF COMPUTERS IN STUDIO
doi	https://doi.org/10.52842/conf.acadia.2003.119
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 119-127
summary	One of the most significant technological challenges facing architecture schools today is how to provide an appropriate level of access to computing resources. As the computer has become a significant tool in the study and practice of architecture, students need to have access to that tool in order to further their studies. But in facing this question of access, what is “appropriate”? Is there such a thing as too much access? Is 1:1 access—a computer for every student—the minimum level of access that schools and students should accept? Or is there a point beyond which more resources just means more waste; computers sitting idle and unused, or students using the computer for unproductive ends? These questions were the subject of an experimental series of studios in the spring of 2002, wherein three studios were given varying numbers of computers for a term. The use of these computers was then tracked, and compared with previous terms. In tandem, the quality of work produced by these three studios was compared. While additional experiments are most likely needed to draw firm conclusions, the results of this experiment seem to support defining “an appropriate level of access” at less than 1:1.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	f8f7
id	f8f7
authors	Bhzad Sidawi
year	2003
title	The pattern of Internet use for information management by architectural practices in the UK
source	Cardiff University, Welsh School of Architecture Cardiff, UK
summary	In recent history, architects have experienced problems related to the use and management of new innovations. The Internet presents one such challenge. It offers considerable expansion in types of communication and sources of business information and connects people and businesses around the globe. As is argued in this research, these services could play a positive role in architectural practice. This research examines the use of the Internet by architectural practices in UK in order to reveal how aware they are of the opportunities it presents, the extent to which they are taking advantage of them, and the problems they are experiencing. A field study was conducted of two types of practices: RIBA private practices and local authority practices. A number of research tools were used to inspect how these practices are using the Internet to manage various types of information that used and produced in the practice, namely: the acquisition of web information, the exchange of the practice’s information through the web and the presentation of the practice’s information on the web. Explanations for the results were sought by correlating variables from the questionnaire study, using simple statistical tests. The field study shows that many Internet services are unpopular among architects, and that practices have problems in adopting and using the technology. The pace at which the Internet is being absorbed and accepted by practices is slow. The study suggests that possible causes are: the little knowledge of users’ about IT, the poor resources of the practice, and old or imperfect Internet installations and the absence of the Internet support to the architect’s activities. The research argues that there are a number of links between these negative factors which make the practice unable to utilize the Internet and to manage the practice’s information through the Internet. To break these links, the research suggests that practices should adopt a specific management strategy to promote more utilization of Internet services in the office and to manage information. Practices need to make certain changes to the way they manage the Internet and work with it, if they plan to integrate the Internet more successfully into their practice. The research discusses techniques for improving practice management which would help practices to digest Internet technology and to use it more effectively in the practice.
keywords	Internet, Architectural practices, Information management, Communications
series	thesis:PhD
type	normal paper
email
last changed	2006/11/03 23:29

_id	caadria2003_a1-1
id	caadria2003_a1-1
authors	Burrow, A., Burry, J., More, G., Tengono, Y. and Burry, M.
year	2003
title	Visual and Sonic Communication Representations to Support Design Interaction
doi	https://doi.org/10.52842/conf.caadria.2003.029
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 29-42
summary	Interaction between collaborating parties exerts strong and surprising forces on the design process and thus its outcomes. Hence, there is much to be gained by investigating the nature of these communications. By definition, an organisation establishes clear protocols to realise effective communication, and does so in response to business needs. In contrast, creative endeavours must often harness loose teams of specialised individuals, working in different contexts, disciplines, and language bases, and relying on nonformalised yet highly selective exchanges of information. It is therefore a considerable challenge to comprehend and improve these processes. One approach is to exploit the discrete information contained within digital communications to produce models of these complex conditions. This paper reports preliminary work to identify the components of an email visualisation system. The goal is to apprehend developing structures, providing the collective with the capacity for reflection.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade03_501_141_cumming
id	ecaade03_501_141_cumming
authors	Cumming, Michael
year	2003
title	Distributed and Constructed Knowledge in Design Education
doi	https://doi.org/10.52842/conf.ecaade.2003.501
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 501-504
summary	One aspect of design education to impart design information and theory, which from the students’ viewpoint may appear to be a static body of knowledge. This knowledge is imparted to them by parties with expertise in particular topics. This type of information could be called ‘received knowledge’: teachers teach it and students receive it. There is also a ‘constructive’ aspect to design education, in which students are expected to build their own personal knowledge bases, and to present a progression of design proposals that build from this personal knowledge. This kind of knowledge is much more difficult to share with others because it relies on require personal interpretation. If teachers and their students are considered to form a ‘knowledge hierarchy’, in which those at the top know more about a particular topic than those further down the hierarchy, then centralized information and knowledge systems appear appropriate. However, in design education, students can sometimes know more specialized knowledge about certain design situations than their teachers, and can also learn and construct things of value from their fellow students. In such situations, decentralized or peer-to-peer technologies become more attractive. This paper discussed some philosophical and technical aspects to the centralizing and sharing of design knowledge, with respect to emerging peer-topeer (P2P) communication technologies.
keywords	Knowledge hierarchies; knowledge decentralization; constructivism
series	eCAADe
email
last changed	2022/06/07 07:56

_id	6915
authors	Dorninger, Peter
year	2003
title	XML Technologies and Geodata
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Photogrammetry and Remote Sensing are very important methods for acquisition of geodata. During the previous decade, severalrevolutionary changes occurred in this area. Until the appearance of automated image analysis tools, it was necessary to measureselected points in the images given. At that time, it was much faster and even cheaper to get images of real world objects compared tothe time and money consuming process of manual analyses. So one tried to minimize this effort by measuring only characteristicpoints such as edges, break-lines, peaks and valleys and, for sure, a grid with a given grid step which was selected to meet the efforts.Lots of information in the images was neglected.Digital point matching algorithms and airborne laser scanning provide many new possibilities. The only restriction on spatialresolution is the one of the used sensors. Given a more precise image sensor, the matching algorithm will be able to match moresurface points; given a higher frequency laser scanner, more points can be measured of the same area. And those sensors get moreand more precise every day. Besides, those techniques allow for fast repetition which is necessary to create time series as a basis for4D modeling! However, this fact is accompanied by several problems concerning the capability of available computers. Some years ago, as the first ideas of 3D city models arose, it was very difficult to acquire the necessary data. Today the new sensors and methods have thenecessary capability, but we are not able to handle the available datasets efficiently, because of shortcomings in the past. In a time ofworld wide data exchange through the internet and global datasets, it is necessary to have efficient methods and algorithms tomanage the available data. There is a need for international, vendor independent data exchange and management standards that haveto be accepted and supported by the industry. This article is going to present several methods of data encoding using standardized data formats based on eXtensible Markup Language (XML). After an introduction to this kind of data encoding, two derived applications for management, storage and presentation of geodata are described. As XML data is written in text format, the datasets have the ability to become rather long.Therefore some promising methods to reduce the amount of data are introduced afterwards. XML documents are mainly used fordata exchange between databases. Therefore the capabilities of commonly used database systems for storage of geodata are describedin the end and current implementation results of the Institute of Photogrammetry and Remote Sensing (I.P.F.) are presented.
series	other
email
last changed	2003/03/11 20:39

_id	ea0f
authors	El Araby, Mostafa and Okiel, Ahmed
year	2003
title	The Use of Virtual Reality in Urban Design: Enhancing the Image of Al-Ain City, UAE
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	This study aims at exploring the rapid growth of the use of Virtual Reality techniques in the field of Urban Design with application to the Al-Ain City. Currently, Virtual Reality and Virtual Environments are the most growing fields of information technology and have a great media attention. There is evidence to suggest that the use of such technology will enhance conceivable image of any proposed project at any urban setting for users, designers and clients. Therefore, city officials and administrators (clients) and the public (users) can reach better decisions regarding proposed projects within their towns and cities. Because of the limited time and resources, this study examines the visual quality of Downtown Al Ain, UAE, specifically, the Khalifa street (major shopping street). A basic VRmodel to the street was constructed. Modifications to the basic model were made to examine how changes in buildings’ heights and street vegetation affect the visual quality of the street. Results of this study showed that urban visualization is proving to be a valuable tool for designers and planners. Increasing the heights of buildings in the mid-street and on the edges, along with enforcing distinctive architectural styles for the proposed buildings will enhance the overall quality of the street. Furthermore, decreasing the intensity of current vegetation and tree heights will increase the imaginable quality of the street. Nevertheless, the built of a comprehend VR model needs more time, resources and facilities that were not available to this study. This model, if completed, tothe whole downtown area can be used both to identify existing problems and to quickly evaluate alternative solutions to those problems.
series	other
email
last changed	2003/03/11 20:39

_id	avocaad_2003_01
id	avocaad_2003_01
authors	Jack Breen
year	2003
title	VISTA VERSA – Critical Considerations on the Evolvement of Designerly Attitudes, Instruments and Networks in Design Driven Studies
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Keynote Paper - We are all involved in design.Besides being the (sub)conscious recipients of all sorts of design driven activities, we are professionally concerned with products of design and acts of designing, either as practitioners or as academics, in some cases as both… As someone who was trained as a designer, drifted into design teaching and presently attempts to combine composition research with design practice, I feel there is a need to bridge the cultural gap between design and design research. I intend to put forward the case for more designerly approaches in the study of design. In this context I would like to discuss perspectives for design driven studies by considering the following ensemble of aspects:- the matter of shifting attitudes to design in a scientific context; - the necessity of expanding the scope of instruments of design in relation to methods and insights. - the furthering of opportunities for networks aimed at bringing out and communicating findings concerning different aspects of design.It is on the topic of interaction, between the targeted creativity of designing on the one hand and the open minded search for relevant knowledge, insights and applications on the other, that I would like to dwell. Furthermore, I hope to provoke some thoughts – and hopefully responses – concerning the roles of computer based applications in such studies. What kinds of impulses have computer technologies offered, should they perhaps have offered and indeed might they still be able to offer in this field? I would like to by take a critical look back and try to turn things around, towards a possible view forward…
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade03_615_54_kheng
id	ecaade03_615_54_kheng
authors	Lim, Chor-Kheng
year	2003
title	Is a pen-based system just another pen or more than a pen?
doi	https://doi.org/10.52842/conf.ecaade.2003.615
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 615-622
summary	Freehand sketch is the most critical stage in the design process. The importance of the freehand sketch is in its ability to freely represent various projections of ambiguous drawing using a convenience tool, pen-and-paper. Recently, pen-based system which developed attempted to use pen as an input device, allowing sketches to be freely drawn on computers. However, as far as the various drawing projections, such as diagram, symbol, plan, elevation, section, perspective, etc., how are they interrelated to a designer’s cognitive behavior? Different media have different abilities to represent projections. What’s the difference of design cognitive behavior between conventional pen-and paper and pen-based system in view of both using a pen as a design medium? This research proceeds a think-aloud protocol analysis to present an analysis and discussion. Research results show that there is a relationship of gradual embodiment, mutually complementary, going from a whole to being dissected into sections between the different projections. Moreover, pen-based system is more than a pen, it allows designer to inspect a 3-D view during the sketching stage. This gives the designer more opportunities during the sketching stage to conduct the design thinking process based on the ambiguous 2-D projections and the more concrete 3-D images, as well as more opportunities for visual feedback
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia03_053
id	acadia03_053
authors	More, G., Padgham, L., Mathieson, I. and Burry, M.
year	2003
title	Multidimensional Presentation Environments with IntegratedIntelligent Agents
doi	https://doi.org/10.52842/conf.acadia.2003.421
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 421-425
summary	A Multidimensional Presentation Environment (MPE) is defined here as a digital environment containing spatially located data that can be navigated by a presenter. Given an array of data types and the potential infinity of the associated datascapes, there is an opportunity to develop systems that assist the presenter in the navigation and analysis of complex information scenarios. This research reports on the utilisation of intelligentagent based software for a better understanding of spatial information representation within the MPE. This is achieved by utilising intelligent agent software to aid the presenter in the searching, retrieving, and articulation of datasets, and the application of such technologies in the generation of time based 3D graphical and audio presentations.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ecaade03_607_140_mpapavasiliou
id	ecaade03_607_140_mpapavasiliou
authors	Papavasiliou, Mattheos
year	2003
title	Digital space and ephemeral visuals as determinants of contemporary design: A Survey of Projects of Architectural Students in CAAD
doi	https://doi.org/10.52842/conf.ecaade.2003.607
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 607-611
summary	Outside of views produced deliberately for the design of architecture, there exists a large body of images; visuals of no materialized spaces, constructed only on paper or in pixels in popular cultural media – editorial illustration, comic strips and books, cinema, television, advertising and web imagery. All the aforementioned visuals, fragments of architecture are within our everyday life and more important influence strong spatial paradigms for students of architecture. The proposed presentation is about the work within a university Computer Aided Architectural Design studio where students asked to investigate the ephemeral environments that surround their everyday life and translate them into architectural intentions. This paper argues that the digitally mediated design of young students of architecture incorporates the ubiquity of contemporary life-style; reflects through student design proposals the new orientations of contemporary architecture and finally revises the integration of the CAAD studio with the ‘traditional’ studios of design within the school of Architecture.
keywords	CAAD and Design Studio Teaching
series	eCAADe
email
more	http://www.design-clinic.com/m.papavasiliou/
last changed	2022/06/07 08:00

_id	ecaade03_301_36_rafi
id	ecaade03_301_36_rafi
authors	Rafi, Ahmad M. E. and Jabar, Mohd. Fazidin
year	2003
title	FCM: An Automated Flood Crisis Management System
doi	https://doi.org/10.52842/conf.ecaade.2003.301
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 301-304
summary	This research presents our progress of the second phase of City Administration System (CAS) (Rafi and Fazidin, 2001). It covers the terrain generation of Kuala Lumpur’s Central Business District about 30km x 30km at 1 meter resolution using the latest stereoscopic satellite data and survey data from Mapping Department of Malaysia’s Ministry of Science, Technology and Environment. CAS will be designed to have three main functions, namely: Flood Crisis Management (FCM), Architectural and Town Planning Management, and City Services and Administration. At a 1meter resolution, CAS will be able to predict, manage and visualise flash and major floods within the city with a very high degree of accuracy. It has been identified for CAS that there is a need to share information through collaborative environment in a more centralised manner that allows collective decisions, facilitates continuous updates, communicates effectively and permits the sharing of experiences and ideas.
keywords	CAS; FCM; collaborative environment; sensor
series	eCAADe
email
more	http://www.mmu.edu.my
last changed	2022/06/07 08:00

_id	acadia03_032
id	acadia03_032
authors	Senagala, Mahesh
year	2003
title	Digital Theory
doi	https://doi.org/10.52842/conf.acadia.2003.x.u6f
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 254
summary	The computer has gone from being an isolated box to become part of a gigantic digital network of networks that shapes our collective future. The way and pace at which we connect, communicate, memorize, imagine and control the flows of valuable information have changed forever. There are at least six digital phenomena that directly affect the architectural world: miniaturization (of all that can be shrunk), ubiquity (being everywhere, global), realtime (communing globally in realtime, which is 1/10th of a second), noospherization (networking every-thing), virtuality (all that is solid melts into knowledge), and anamnesia (inability to forget). Temporal contiguity and temporal connectivity have taken precedence over spatial and geographical contiguity. The strands that animate our life today emanate from spatially distant but temporally contiguous/connected places. These phenomena have squeezed, stretched, restructured, reconfigured, and redistributed most major human institutions. Consequently, the built world’s role, importance and nature have changed. Architecture as traditionally understood has become more marginalized than before. Many practices, however, have been repositioning themselves to take advantage of the new opportunities beyond the bounds of traditional architectural practice. Design, practice, fabrication and construction are increasingly becoming networked affairs. The new measures of architecture are connectivity and speed. The architecture of a new world needs to recognize these transformations and think differently.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	steino-thesis
id	steino-thesis
authors	Steinø, Nicolai
year	2003
title	Vision, Plan and Reality
source	Aarhus: Aarhus School of Architecture, PhD Thesis
summary	How come, that there is often a gap between what is considered good urban design and the built reality of the urban environment? This is the question which the thesis aims to investigate. It has often been stated that urban development can no longer be controlled, and the reason for this has been ascribed, among other things, to the power of the market, postmodern pluralism, or simply to the increased complexity of society. Yet, to decline on the capacity of urban design to guide urban development on such accounts, is to give up on urban design altogether. Rather, if urban design is incapable of achieving what it is aiming at, something must be wrong with it. Thus, the basic argument of the thesis is, that the answer to this question must be sought within urban design itself, rather than within the context in which it operates. In order to approach the research question, the thesis is organized as a twofold investigation, consisting of both an empirical study of the practice of urban design – in the form of a detailed case study of two urban development histories – and a study of the theoretical foundations for this practice. As urban design is regarded as an interdisciplinary activity, the theoretical study is organized as a threefold investigation of urban design theory, planning theory, as well as urban theory. As urban design in practice must consider what the built environment should be like as well as how it is developed, it must include normative as well as procedural considerations. Thus, the issues of normativity and process are central to the understanding of urban design. These issues therefore constitute the foci of both the empirical and the theoretical study.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	cf2003_m_006
id	cf2003_m_006
authors	ACHTEN, Henri and JESSURUN, Joran
year	2003
title	Learning From Mah Jong - Towards a Multi-Agent System that can Recognize Graphic Units
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 115-124
summary	Sketching is a major means of exploiting the first conceptual developments in architectural design. If we want to support the architect in the ideas-developing phase of design, then we need to understand the conventions of depiction and encoding in drawings. The theory of graphic units provides an extended list of such conventions that are widely used. We propose that a multi-agent system for recognition of graphic units in drawings is fruitful: agents can specialize in graphic units, a multi-agent system can deal with ambiguity through negotiation and conflict resolution, and multi-agent systems function in dynamically changing environments. We first make a multi-agent system that can do something simpler: playing Mah Jong solitary. The Mah Jong solitary system shares the following important features with a multi-agent system that can recognize graphic units: (1) specialized agents for moves; (2) negotiation between agents to establish the best move; (3) dynamically changing environment; and (4) search activity in more advanced strategies. The paper presents the theoretical basis of graphic units and multi-agents systems. The multi-agent framework and its implementation is presented. Various levels of game play are distinguished, and these are correlated to the multi-agent system. The paper shows how the findings form the basis for graphic unit recognition.
keywords	artificial intelligence, games, graphic units, agents
series	CAAD Futures
email
last changed	2003/11/22 16:39

_id	ascaad2004_paper12
id	ascaad2004_paper12
authors	Al-Qawasmi, Jamal
year	2004
title	Reflections on e-Design: The e-Studio Experience
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	The influence of digital media and information technology on architectural design education and practice is increasingly evident. The practice and learning of architecture is increasingly aided by and dependant on digital media. Digital technologies not only provide new production methods, but also expand our abilities to create, explore, manipulate and compose space. In contemporary design education, there is a continuous demand to deliver new skills in digital media and to rethink architectural design education in the light of the new developments in digital technology. During the academic years 2001-2003, I had the chance to lead the efforts to promote an effective use of digital media for design education at Department of Architecture, Jordan University of Science and Technology (JUST). Architectural curriculum at JUST dedicated much time for teaching computing skills. However, in this curriculum, digital media was taught in the form of "software use" education. In this context, digital media is perceived and used mainly as a presentation tool. Furthermore, Computer Aided Architectural Design and architectural design are taught in separate courses without interactions between the two.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
doi	https://doi.org/10.52842/conf.caadria.2003.323
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: