Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	avocaad_2003_04
id	avocaad_2003_04
authors	Rob van Helvoort
year	2003
title	Mecano - when CAAD meets ICT
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	For some years ICT (Information and Communication Technology) has been worldwide a hot topic and, especially in the European academic environment, a very fashionable word. No matter where the road would lead to, almost any ICT related project was welcomed as the next step towards a brand new and even better system of education. In the meantime CAAD (Computer Aided Architectural Design) plays a role of utmost importance during a range of stages in the design process or building project.In this situation a research project is set up to develop an educational environment where CAAD meets ICT. The first application was turned down as the proposed (ICT) technology wasn’t available, according to committee judging. After proving them wrong, the second application was more successful. Even though the project was set up for local values, education in CAAD and related topics in Belgium, it was situated in a networked (internet) world.After running the project for a period of two years a list of pros and cons can be made up. Moreover, both local and on a global scale, ideas have changed.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	caadria2003_b4-2
id	caadria2003_b4-2
authors	Choi, Jin Won and Park, Jae Wan
year	2003
title	Developing a Building Design Compiler that Frequently evaluates Building Design Performance within the Design Process
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 553-566
doi	https://doi.org/10.52842/conf.caadria.2003.553
summary	This paper demonstrates an experience in the development of a design performance evaluation system that can frequently evaluate building design performance within the design process in a real-time manner. The evaluation system, that we call "design compiler," is composed of several modules such as a front-end component-based CAD engine, a knowledge base, and a set of design agents. The notion of the design compiler is quite similar to a compiler for computer programming such as a C compiler. While a computer programmer compiles a set of programming codes to check compiling errors during the implementation of a software system, an architectural designer can 'compile' his/her intermediate design product to evaluate design errors during the design process. The compilation can be done immediately at any level or any time during the design process in a real-time manner. We expect that this compiling process will dramatically increase design feedbacks, and thus result in a better design product. Further research issues that have been identified at the end of the research include increasing the modeling capability, extending to multi-story building representation, developing various design agents, exploring better ways to request and manage design knowledge, and supporting design collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	fd5c
id	fd5c
authors	Derix C and Simon C
year	2003
title	Morphogenetic CA: 69’ 40’ 33 north
source	Proceedings of the Generative Arts conference, Milan, 2003
summary	We would like to present some recent work using cellular automata and agent modelling for the generative design of building configurations. The cellular automata is based on a 3d terrain model of a site (taken from the recent Europan competition) which is encoded with both topological and economic data, and agents that are light sensitive and which reconfigure the developing architecture by checking overshadowing and spatial occupation. The emergent pattern of development therefore results from an understanding of the programmatic and the spatial parameters of the task, and is intimately related to the site and its peculiarities.
keywords	urban planning, cellular automata, agent modelling, solar performance, hierarchical massing
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 21:37

_id	ecaade03_199_196_gatermann
id	ecaade03_199_196_gatermann
authors	Gatermann, Harald and Czerner, Juergen
year	2003
title	Modular E-Learning-Environment for Architecture
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 199-202
doi	https://doi.org/10.52842/conf.ecaade.2003.199
summary	IMLAB (Interdisciplinary Modular Learning System for Architecture and Building Science) is a project, startet by three schools of architecture in Germany: a modular, digital and online-based system, which has the aim to collect and improve teaching elements from architectural schools around the world. The development of digital teaching materials at every single university is very expensive - so the idea is to motivate schools all over the world to contribute their teaching materials and teaching moduls. It could work like an architectural ""napster"". The initial development of this kind of teaching community was funded by the German Federal Ministry of Research as a research project. The momentary state of work is documentated on the following website: www.imlab.de. Unfortunately all the information is in German up to now - we will develop the english version as soon as possible. We do have interactive workshops and design-projects beetween different universities up to now (in Germany) and several contacts to international partners. We would like to use eCAADe 2003 as a platform for multiplying this idea and finding more partners from all over the World.
keywords	e-learning, modular, synchronous, asynchronous, knowledge-base
series	eCAADe
email
last changed	2022/06/07 07:51

_id	4c01
authors	Laranjeira, Teresa
year	2003
title	The S. Pedro da Cova Community Knowledge Centre, a local example of empowerment through technology
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	S. Pedro da Cova (Gondomar), located ten kilometres from the city centre of Porto (Portugal), is considerate a depressed territory, with a large spectrum of social, economic and urban problems, but also with local positive aspects capable to reach the different development opportunities.In the ambit of the regeneration process for this area, the local authority draw a strategy based in the empowerment of the citizens, where the Information Communication Technologies (ICT’s) assumed a major role. With this purpose, it was intended to build a Community Technology Centre for the disfavoured children. From the building construction till the first activities, it is our conviction that to break the differences between the have and the have not’s it will be very important to conciliate the new technologies and the local characteristics. The children will be the active agents in the dissemination of the project through the development of the different activities, sensitising the families to adopt a healthy life and announce situations of risk, for example. To validate the project will be created an permanent observatory that propose a moment of reflection and auto-valuation about the evolution of the different activities, thechanges to do, and the identification of new problems and the redefinition of new methodologies. The aim of the article is not only to show the positive aspects, indeed significant, but also to bring into discussion some questions; in order to understand the possibility of defining an empowerment strategy based in the ICT’s. How to conciliate the individualperspectives of the future into a common objective? How to show to all community that information and knowledge are fundamentalto build a more liveable and equity neighbourhood? How to transfer the results to a larger strategy for the entire city? And, at theend, how to explain that people is the most important "infrastructure" to build a better future?
keywords	Social Exclusion; Informal Urban Structure; Empowerment; Spaces of Knowledge
series	other
email
last changed	2003/03/11 20:39

_id	caadria2003_c1-1
id	caadria2003_c1-1
authors	Tsou, J.-Y., Chow, B. and Lam, S.
year	2003
title	Integrating Scientific Visualization into the Architectural Curriculum for Teaching Environmental Technology and Building Performance
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 133-144
doi	https://doi.org/10.52842/conf.caadria.2003.133
summary	The research team completed a three-year project funded by the Teaching Development Grant (TDG), which aims to explore, develop, and support a long-term strategy to apply scientific visualization to teach the core architectural curriculum in environmental technology and building performance design. An interinstitutional collaboration was formed to draw on the knowledge and experience of colleagues in related disciplines to develop innovative teaching pedagogy and resources. The project has made a great impact in improving the teaching and learning environment in our department. In the concerned area, and in this paper, we would like to discuss the methodology and computational environment developed and highlight the findings in the following areas: Contribute to the development of curriculum of Technics studio, New curriculum on performance-based design and planning, Collaboration with other design schools and professional institutions, and Evaluation method for the project development.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia03_039
id	acadia03_039
authors	Clayton, Mark J.
year	2003
title	Connecting Digital Tools
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 299
doi	https://doi.org/10.52842/conf.acadia.2003.x.p0b
summary	A decade ago, Bill Mitchell wrote “Chroniclers of our era may one day write ‘What was computer-aided design?’ To them, it will just be design.” Because of the proliferation of digital tools for design, we are rapidly forgetting that there was ever design before computing. Ask an undergraduate student to describe the design process. There is a good chance that the student will mention using CAD and 3D modeling. Ask a contractor how to practice the profession of building.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	19ea
authors	Dallhammer, Erich
year	2003
title	The IKEA Factor - Driving elements of the development of shopping centresat the edges of European metropolitan regions
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	A house and a garden in the suburb, a car for each adult and a TV set with minidish. On weekdays mum and dad work, the children go to school or kindergarten. On Saturdays (or Sundays) the family goes shopping to the shopping centre, where they buy what they need, have a cheap meal and can see a film or just pass the time. That seems to be the way of life for a typical middle class family in the so-called western world, or at least what sitcoms, comics, adverts and films make people believe what it normally should be. That propagated way of living strongly influences people’s and especially consumers’ behavioural patterns and consequently spatialdevelopments, which are the present challenges for urban and regional planners.
series	other
email
last changed	2003/03/11 20:39

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ecaade03_433_208_froehlich
id	ecaade03_433_208_froehlich
authors	Fröhlich, C., Hirschberg, U., Frühwirth, M. and Wondra, W.
year	2003
title	no_LAb__in_feld - Is common- ground a word or just a sound? (Lou Reed, 1989)
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 433-436
doi	https://doi.org/10.52842/conf.ecaade.2003.433
summary	This paper describes the concept and the current state of development of a new laboratory for digital experimentation in architectural education and research. The novel forms of collaboration and learning for which it is intended and the quick pace of innovation in digital technology on which it depends both require an appropriately flexible spatial and technological framework. And it requires a particular mindset. The no_LAb__in_feld is not just another laboratory. It is a place, a community, a high-tech construction site, a permanent work in progress. It is the prototype of a next generation design studio.
keywords	Design studio education: creative collaboration; digital playground; hybridinteractive installations; augmented reality
series	eCAADe
email
more	http://ikg.tugraz.at/
last changed	2022/06/07 07:50

_id	diss_2003
id	diss_2003
authors	Gorczyca, Adam
year	2003
title	Interaction of the design methods and the contemporary computer techniques
source	Faculty of Architecture, Warsaw University of Technology
summary	The thesis researches a bilateral relations between computer techniques and methods of architectural design. It represents a holistic attitude because of a multithread analysis in the field of the theory of design, a new hard- and software used by architects, and a design practice. Thesis: Contemporary computer science development at the end of the twentieth century pushed architects to use hard- and software as tools, which became an active support (more than just CAAD). It enabled to widen the scope of a form-properties research and a generation of solutions impossible to achieve before, by using traditional methods and tools. This situation leads to new, unpredictable possibilities of architectural research and design. Objectives: 1. Definition of the latest trends in computer technologies applied in architectural offices. 2. Presentation of some practical consequencies of application of those technologies in design and construction. 3. Separation of new design methods caused by use of digital tools. 4. A simplified taxonomy of the methods above, with characteristic features. 5. A research in practical application of digital tools in Polish and foreign offices, as well as at the WUT Faculty of Architecture. The subject of the work: The thesis constitutes of five chapters. The first chapter is an introduction, where the range of work is presented in the context of place, time and the research made. The following chapters research three aspects of CAAD: (1) hardware and software, (2) new definition of architecture, which is a result of application of the digital tools, (3) practical problems connected with the use of computer techniques. The second chapter describes the new technologies in use –Virtual Reality (incl. VRD, CAVE’s, Data Gloves, motion-capture), Rapid prototyping (incl. holographic printers, 3D scanners, routers, milling-machines), new types of interfaces (e.g. xWorlds, InfoSpace, Flock of birds), etc. The third chapter is a theoretical one. It presents three types of changes in design methods, which can be classified, judging by results, in architecture of: (a) in-formation (b) de-formation and (c) cyberspace. All the mentioned applications of a digital technology cause redefinition of the range of the architects’ profession. The fourth chapter is concentrated on the application and utilization of technology. It is a detailed analysis of chosen buildings (characteristic examples) and design methods used by some avant-garde and well-known practitioners and visioners of architecture (Eisenman, Gehry, Spuybroek, etc.). It also presents statistics, where the influence of digital tools on the way of working (efficiency, productivity, use of tools) is expressed numerically. A synthesis summarizes the relation between architects and the new digital tools in some aspects: hard- and software, social changes, ergonomics, methodics, linguistic/symbolic and architectural. The mentioned ranges of interaction constitute the proof of the thesis.
series	thesis:PhD
email
last changed	2003/09/17 18:20

_id	acadia03_047
id	acadia03_047
authors	Martens, B., Brown, A. and Turk, Z.
year	2003
title	Automated Classification of CAAD-related Publications: Conditions for Setting-Up a Keywording System
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 365-371
doi	https://doi.org/10.52842/conf.acadia.2003.365
summary	This paper deals with the CUMINCAD-repository (Cumulative Index on CAD), which was set up in 1998 and has served the CAAD-community since then as an important source of archived domain related information. CUMINCAD contains over 5,000 entries in the form of publications in the field of Computer Aided Architectural Design. The number has been growing steadily over the years. To date only advanced search mechanisms have been provided to access these works. This may work out well for a just-in-time location of a reference, but is inadequate for just in case browsing through the history of CAAD. For such applications, a hierarchical browsing interface, like one in Yahoo or DMOZ.org is envisioned. This paper describes how the keyword categories were defined and how a moderate, distributed effort in defining the categories will allow machine-identified classification of the entire data set. The aim of the paper is to contribute to building up a wide spread consensus on what the appropriate keyword categories in CAAD are, and what sub-topics should sit below the main keyword categories.
keywords	Web-based Bibliographic Database; Searchable Index; CAAD Research; Classification
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia03_031
id	acadia03_031
authors	Paolo Fiamma
year	2003
title	Architectural Design and Digital Paradigm: from Renaissance Models to Digital Architecture
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 247-253
doi	https://doi.org/10.52842/conf.acadia.2003.247
summary	Means of expression have always affected our ways of thinking. Designers, who have to interpret signs, languages, and evolution in order to translate into an organised “form” the recurring problems and values of mankind, have left thoughts, projects and wishes to the study of representational techniques. In this way, they have also disclosed a unique view of reality and at the same time a “way of being” towards the meaning of design itself. In the relationship between architecture and representational techniques, Brunelleschi said that “perspicere” was no longer just the science of optics, but also the science that contained the lines of research on geometry and shape that he was the first to exploit in design. Centuries later, in the axonometric representation advocated by De Stijl and intended for factories and industries, the object, shown in all its parts, easy to reconstruct even in the space to which it referred, revealed with extreme clarity the mass-production building and assembly materials and systems. Digital representational media make a great entrance in the heuristic process, invalidate all signs, and promote its quality. The result is an ever-changing, computerised architecture, dominated by curvilinear, wavy shapes that flow from a generative process made of the deformations, additions, and interference of different volumes.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	caadria2003_a2-4
id	caadria2003_a2-4
authors	Seichter, Hartmut
year	2003
title	Sketchand+ a Collaborative Augmented Reality Sketching Application
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 209-222
doi	https://doi.org/10.52842/conf.caadria.2003.209
summary	The sketch is the embodiment of the architectural discussion. It incorporates rapidness and fuzziness and as this it is an object of interpretation. The interesting thing there is the question, if the usage of VR/AR already in the early phases of a design can have an impact for the quality of a design-process. Examples like VRAM (Regenbrecht et al., 2000) or TAP (Seichter et al., 2000) showed that there is a huge potential for research. The sketch as one of the parts of an early design is tightly coupled with cognitive aspects and communication. Pictured by a sketch is just a snapshot of what have to be discussed in the ensuing design procedure. The intention behind this work is an exploration about a medium which is not yet adapted to the digital world (Myers et al., 2000) and it can be easily be described with the words of Harald Innis: Mankind constantly being caught in his own traps: language and systems, developed and most difficult to break down. (Innis, 1951)
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade03_075_05_kvan
id	ecaade03_075_05_kvan
authors	Wong, Wilson and Kvan, Thomas
year	2003
title	Agent support for monitoring collaborative design knowledge
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 75-82
doi	https://doi.org/10.52842/conf.ecaade.2003.075
summary	Design teams are typically distributed across many locations and communicate with multiple media. Computer tools have been developed to support and improve such communication. Agent support of design has been discussed in terms of the support of graphical and object based systems. Another aspect of design that is often discounted is the textual dimension. Discussions of media in architectural design typically revolve around graphical forms, be they digital or analogue. This emphasis on graphics overshadows the role of text in design; the interactions of designers requires broader support. In this paper, we consider role of text-agents in support of collaborative architectural design. Text is a common medium to record information in computer technology and has a role to play in an architectural design process. In collaborative environment, a shared understanding and preserved history are important for communication. Design knowledge is accumulated through textual databases, be they email or longer documents. In this way, just as graphics can be seen as a design aid, so too can text. This proof of concept implementation of an agent system demonstrates how collaborative design can benefit from agent support.
keywords	Collaboration, software agents, communication, text
series	eCAADe
email
more	http://arch.hku.hk/~tkvan
last changed	2022/06/07 07:57

_id	avocaad_2003_05
id	avocaad_2003_05
authors	Alexander Koutamanis
year	2003
title	Autonomous mechanisms in architectural design systems
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The development of architectural design systems that describe fully the form, structure and behaviour of a design relies heavily on the incorporation of intelligence in the representations, analyses, transformations and transactions used by the computer. Traditionally such intelligence takes either of two forms. The first is a methodical framework that guides actions supported by the design system (usually in a top-down fashion). The second is local, intelligence mechanisms that resolve discrete, relatively well-defined subproblems (often with limited if any user intervention). Local intelligent mechanisms offer the means for adaptability and transformability in architectural design systems, including the localization of global tendencies. This refers both to the digital design technologies and to the historical, cultural and contextual modifications of design styles and approaches.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

For more results click below: