Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 29

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2003_01
id	avocaad_2003_01
authors	Jack Breen
year	2003
title	VISTA VERSA – Critical Considerations on the Evolvement of Designerly Attitudes, Instruments and Networks in Design Driven Studies
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Keynote Paper - We are all involved in design.Besides being the (sub)conscious recipients of all sorts of design driven activities, we are professionally concerned with products of design and acts of designing, either as practitioners or as academics, in some cases as both… As someone who was trained as a designer, drifted into design teaching and presently attempts to combine composition research with design practice, I feel there is a need to bridge the cultural gap between design and design research. I intend to put forward the case for more designerly approaches in the study of design. In this context I would like to discuss perspectives for design driven studies by considering the following ensemble of aspects:- the matter of shifting attitudes to design in a scientific context; - the necessity of expanding the scope of instruments of design in relation to methods and insights. - the furthering of opportunities for networks aimed at bringing out and communicating findings concerning different aspects of design.It is on the topic of interaction, between the targeted creativity of designing on the one hand and the open minded search for relevant knowledge, insights and applications on the other, that I would like to dwell. Furthermore, I hope to provoke some thoughts – and hopefully responses – concerning the roles of computer based applications in such studies. What kinds of impulses have computer technologies offered, should they perhaps have offered and indeed might they still be able to offer in this field? I would like to by take a critical look back and try to turn things around, towards a possible view forward…
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	572a
id	572a
authors	Mao-Lin Chiu (ed.)
year	2003
title	CAAD TALKS 2: DIMENSIONS OF DESIGN COMPUTATION
source	Taipei, Taiwan, Garden City Publishing Ltd.
summary	This is the second book of a serial of CAAD Talks publication. In this volume, 17 articles in regarding with the studies in design computation and cognition are compiled. The review of CAAD pioneer work such as H. A. Simon, W. Mitchell, T. Sasada, U. Flemming, J. Gero, O. Akin, G. Schmitt., M. Gross, etc.
keywords	Design computation, CAAD research
type	keynote paper
email
last changed	2004/04/10 12:11

_id	545c
id	545c
authors	Mao-Lin Chiu (ed.)
year	2003
title	CAAD TALKS 3: DIGITAL DESIGN EDUCATION
source	Taipei, Taiwan, Garden City Publishing Ltd.
summary	This is the third book of a serial of CAAD Talks publication. In this volume, 9 articles in regarding with digital design education are compiled as a complementary issue of CAAD Futures 2003 conference. Prof. Gerhard Schmitt's keynote lecture "Architects of the 21st century" is included.
keywords	Digital Design, Design Education
type	keynote paper
email
last changed	2004/04/10 12:01

_id	69db
id	69db
authors	Mao-Lin Chiu (ed.)
year	2003
title	CAAD TALKS 1: PROSPECTS OF DIGITAL ARCHITECTURE
source	Taipei, Taiwan, Garden City Publishing Ltd.
summary	This is the first book of a serial of CAAD Talks publication. In this volume, 15 articles in regarding with digital design and architecture are compiled. The design projects of Frank Gehry, UN Studio, G. Lynn, N. Denari, etc. are included.
keywords	Digital design, digital architecture
type	keynote paper
email
last changed	2004/04/10 12:16

_id	caadria2003_k-1
id	caadria2003_k-1
authors	Patummanon, Tipsuda
year	2003
title	Architecture of A49 - Architecture of Khun Nithi Sathapitanonda [Keynote]
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 5-11
doi	https://doi.org/10.52842/conf.caadria.2003.005
summary	I approach a bridge, an escape from the hard concrete floor of Bangkok, and happen to eavesdrop on the silent call of an elephant herd marching into my perception. It now appears in a forest behind the window of a large wall. The forest spreads deeper and deeper beyond the limit of a brick and concrete surface. The wall transforms into the mysterious rain forest of Thailand - robust, complex and healthy. A beam of friendly sunlight penetrates the air of an open well and greets the floor of the forest, it enters to enlighten all of its inhabitants' hearts. ... As I am immersed in the forest, I hear the chimes of its quietness and come face to face with the herd of elephants, marching into the middle of the place. ... All of the elephants in fact are made of wood, however their skin transcends the form of a hard wooden object for it is now transformed into the breathing skin of real elephants - the mothers of the forest. Wherever is felt the breath of the mother of the forest the place flourishes as a healthy world for all life. Here, I can hear the sonority of the quietness upon a visit to the office of A49, the office of Khun Nithi Sathapitanonda.
series	CAADRIA
last changed	2022/06/07 07:59

_id	caadria2003_k-2
id	caadria2003_k-2
authors	Suwansawat, Suchatvee
year	2003
title	The Challenging Subway Project in Bangkok - New Hope of Thais in Solving Traffic Problem [Keynote]
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 13-24
doi	https://doi.org/10.52842/conf.caadria.2003.013
summary	This paper describes the overall delivery of the Chaloem Ratchamongkhon Line, the first subway project in Bangkok as a challenging tunneling project in an urban environment. Eight pressure balance shields were employed under two major civil works contracts (North and South sections) to drive approximately 20 kilometers of twin-tunnel underneath congested area. As a international well known project, multinational workforces exca vated tunnels for the large subway system intended to carry a half million people daily over several lines through the central city in order to minimize traffic jam. Tunnel problem includes many existing structures along the tunnel route as well as flooding, ground subsidence, and fire problems.
series	CAADRIA
last changed	2022/06/07 07:56

_id	sigradi2003_000
id	sigradi2003_000
authors	Carmena, Sonia and Utgés, Raúl (eds.)
year	2003
title	SiGradi2003
source	Proceedings of the 7th Iberoamerican Congress of Digital Graphics Graphics / ISBN 987-9459-51-2] Rosario (Argentina) 5-7 november 2003, 411 p.
summary	The conference topic "Digital Culture & Difference" encourages creative and critical inquiries about the idea of measuring differences within and between culture manifestations of digital age towards new information for knowledge completion. Submitted work may address this topic or other significant aspect of Digital Media. Type of Work Categories: 1- Completed work; 2- Work in-progress; 3- Graphic or visual works (posters). Areas of Inquiry: Design; Architecture, Cinematography; Arts; etc. Focus: Professional applications; Academic experiences; Scientific research; Theory, epistemology, philosophy; Project, design, communication; Environment, preservation, sustainability; Technology, tools, media; etc.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2003_042
id	sigradi2003_042
authors	Carvalho, Silvana and Corso, Gilberto
year	2003
title	Áreas Livres para Ocupação Urbana em Salvador (Free areas for urban occuoation in Salvador)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This work has as main objective to show that Geoprocessing technologies can increase the Urban Planning actions, being a great help to the professionals that work daily with urban space data. For that it was looked for to develop a work methodology, using those technologies, to identify Free Areas for Urban Occupation in Salvador city. The resulting maps of this work intend to be study object for understanding urban space of Salvador and how the city can address its growth and development.
series	SIGRADI
last changed	2016/03/10 09:48

_id	caadria2003_a7-1
id	caadria2003_a7-1
authors	Chantawit, D. and Hadikusumo, B.H.W.
year	2003
title	Integrated 4d Cad and Construction Safety Planning Information for a Better Safety Management
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 891-904
doi	https://doi.org/10.52842/conf.caadria.2003.891
summary	Safety is an important element of project successes. In the conventional project management, safety planning, as a function, is separated from other functions, such as planning/scheduling function. This separation creates difficulties for engineers to analyze what, when, why and where a safety measure is needed to prevent accidents in a construction activity. Another problem occurs due to the conventional practice of representing project designs using two-dimensional (2D) drawings. In this practice, a user (e.g. an engineer) has to convert the 2D drawings into three-dimensional (3D) mental pictures, and this is a tedious task. If only converting this 2D drawing is a tedious task, combining these 2D drawings with safety planning creates more difficult tasks. In order to address the problems, this paper discusses our research in integrating construction scheduling and safety planning in a 4D environment.
series	CAADRIA
last changed	2022/06/07 07:55

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	acadia03_011
id	acadia03_011
authors	d’Estrée Sterk, Tristan
year	2003
title	Using Actuated Tensegrity Structures to Produce a Responsive Architecture
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 85-93
doi	https://doi.org/10.52842/conf.acadia.2003.085
summary	The major theoretical roots of responsive architecture lie within the work of Nicholas Negroponte, and its most inspiring realization, to date, is found in the work of dECOi Architects. The work of NOX, and Diller & Scofidio provide two other built examples of responsive architectures. Each of these works is impressive within its own right. However, all of them have their shortcomings, suggesting that several possibilities for alternative visions still exist. While Negroponte’s work identifies the characteristics of a responsive architecture, it does not propose a model that is suitable for implementation. On the other hand, the work of dECOi architects does not address the technical needs of a building envelope designed for real world conditions of weather and structural load. Diller & Scofidio’s work, also does not have a functional envelope, and NOX’s work lacks physical responsiveness, favoring a palate of virtual responses instead.This paper, after examining the four specific precedents of Negroponte, dECOi, Diller & Scofidio, and NOX, will examine how a fifth precedent—that of Buckminster Fuller’s model of tensegrity structures—may be applied. The paper will propose that by actuating a tensegrity structure a responsive architectural envelope that addresses real world weather and structural loading conditions becomes feasible.
series	ACADIA
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	caadria2003_a6-2
id	caadria2003_a6-2
authors	Embi, M. Hamid, M. and Rafi, A.
year	2003
title	Learning Basic Principles of Fire Regulations An Experimental Teaching and Learning Tool
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 771-786
doi	https://doi.org/10.52842/conf.caadria.2003.771
summary	The study on integrating fire regulations into the design process is described through several study and analysis. However not all of them address the real issue of which fire regulation are difficult to be considered at the early stage of the design process. There are few factors on which fire regulation was not being considered at the early stage of the design. Two strong factors are the complexity of the regulations and the lack of knowledge among architects about fire regulations. Therefore fire requirements are always considered towards the end of the design process. This paper intends to address about the issue of difficulties in fire regulations and how we think these can be solve. We also design a system that can be used either by students or architects to understand the principles of the regulations and its applications in the design process. Finally a prototype system is demonstrated on how we envisage the system that can be used to help architects integrate fire regulations at the early stage of design process.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2003_026
id	sigradi2003_026
authors	Flanagan, Robert
year	2003
title	Persistence of Perception: Encoding Reality
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	"Liquid architecture makes liquid cities, cities that change at the shift of value, where visitors with different backgrounds see different landmarks, where neighborhoods vary with ideas held in common, and evolve as the ideas mature or dissolve." In 1991, Marcos Novak in 'Liquid Architectures in Cyberspace' projected a future of individual and blended realities of things perceived and perceived things - a place of "fertile dreams". In the cathedral, "The dream and making were one." In the present he concludes, "Curiously the practice of architecture has become increasingly disengaged from those dreams." This paper addresses inherent limitations in today's digital technology that restrict its ability to participate in the future design of the "fertile dream." It does not address the technology required, but the requirements of the technology.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
doi	https://doi.org/10.52842/conf.ecaade.2004.024
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	caadria2003_a6-1
id	caadria2003_a6-1
authors	Hu, Catherine and Fox, Michael A.
year	2003
title	Starting From The Micro A Pedagogical Approach to Designing Responsive Architecture
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 761-770
doi	https://doi.org/10.52842/conf.caadria.2003.761
summary	The paper outlines a pedagogical approach whereby a number of technology-intensive skills can be quickly learned to a level of useful practicality through a series of discrete, yet cumulative explorations with the design goal of creating intelligently responsive architectural systems. The emerging area of responsive architecture serves as a practical means for inventing entirely new ways of developing spaces, and the designing and building environments that address dynamic, flexible and constantly changing needs. Responsive architecture is defined here as spaces and objects that can physically re-configure themselves to meet changing needs. The central issues explored are human and environmental interaction and behaviors, embedded computational infrastructures, kinetic and mechanical systems and physical control mechanisms. Being both multidisciplinary and technology-intensive in nature, architects need to be equipped with at least a base foundational knowledge in a number of domains in order to be able to develop the skills necessary to explore, conceive, and design such systems. The teaching methods were carried out with a group of undergraduate design students who had no previous experience in mechanical engineering, electronics, programming, or kinetic design with the goal of creating a responsive kinetic system that can demonstrate physical interactive behaviors on an applicable architectural scale. We found the approach to be extremely successful in terms of psychologically demystifying
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20031305
id	ijac20031305
authors	Kos, José R.
year	2003
title	3D models of urban icons: tracing Benjamin and Koolhaas
source	International Journal of Architectural Computing vol. 1 - no. 3
summary	Walter Benjamin and Rem Koolhaas developed two significant investigations, which explored the culture of Paris and New York through the analysis of their architectural artifacts. Their research projects successfully construct, from a few meaningful components of the built environment, an understanding of the overall city and its society. The objective of this paper is to address the similarities between the research carried out at the Federal University of Rio de Janeiro and the work of these two acclaimed writers. Our group aims to select urban icons, from different moments and areas in Rio de Janeiro, to be studied in order to understand the city evolution in the 20th Century. The distinguished Ministry of Education building is the investigation's prototype, analyzed thorough several 3D models and other digital techniques. We conclude that a thorough study of Benjamin's and Koolhaas' work should be considered a primary support for the interrogation of our own investigation.
series	journal
type	normal paper
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2206
id	2206
authors	Kvan, Thomas
year	2004
title	REASONS TO STOP TEACHING CAAD
source	Mao-Lin Chiu (ed), Digital design education, Garden City Publishing, Taipei 2003, ISBN 9867705203
summary	Computers are a problem. They are expensive, even if the prices have dropped dramatically and promise to continue dropping. They do not look after themselves but demand considerable attention – we have to hire computer specialists to ensure they talk to each other, staff are required to make sure software is installed and to fix things when it no longer works. Learning to use them is tedious; skills have to be developed to master several idiosyncratic software systems. The hardware and software regularly malfunction. It is faster to draw a line by hand than with software. Students already have enough trouble learning how to stop a window leaking or ensure a fire escape route will protect people in time of trouble, why make them learn all these other things. We should stop teaching CAAD. Although technological and economic issues are very real and not to be dismissed lightly, the real problems of teaching CAAD are not these. The real issues we need to address is how we teach and, behind that, why we teach. This paper explores the what and why.
keywords	pedagogy
series	other
type	normal paper
email
last changed	2004/09/27 07:10

_id	caadria2003_c3-4
id	caadria2003_c3-4
authors	Maneesatid, Preecha and Szalapaj, Peter
year	2003
title	The Role of CAD in Environmental Building Science
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 487-502
doi	https://doi.org/10.52842/conf.caadria.2003.487
summary	The fundamental requirement of all building design is the provision of shelter from the external climate and, if possible, the modification of environmental factors generated by this climate to create an internal environment suitable for human comfort. The environmental design strategies of modifying climate derive from the requirements of creating human comfort in buildings, using the elements of the natural climate which vary throughout the year depending upon the prevailing climatic conditions. Environmental Building Science (EBS) research and practice has investigated various techniques to increase architects' performance in environmental building design. These technical design options are also available to architects to take advantage of the external environment. Most environmental design techniques rely on convectional forms of passive environmental design, and building material and system. But it hardly begins to address the more complex demands of environmental building design issues in the buildings. Particularly, testing environmental design techniques against physical models requires much input data which is not available in the early design stages, and is time consuming to use. This forces architects to work with many design parameters that are not compatible with their activities. It is consequently difficult to observe the interrelation of design techniques with design development. The most important role of Computer Aided Design (CAD) is to integrate wider varieties of input data requirements, modelling with EBS properties, output representations with EBS knowledge and assistance tools for optimisation tasks in environmental design issues.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	2004_292
id	2004_292
authors	Modeen, Thomas
year	2004
title	Using Solid Freeform Fabrication for the Conceptualization and Corporeal Actualization of Architecture
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 292-301
doi	https://doi.org/10.52842/conf.ecaade.2004.292
summary	This paper forms an update to the paper presented ar eCAADe 2003, in Graz. It is a summary of a project which aim is to suggest an alternate methodology for utilizing additive Solid Freeform Fabrication (more commonly known as Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive SFF production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Whereas the paper in Graz introduced the conceptual foundations and the taxonomy of the project, the aim in this years paper is to present some of the realized designs and discuss, in brief, how what has been learnt could be furthered as the project proceeds. The three designs described in more detail in the paper, all catalyzed by a specific sensory notion, would have been very difficult, if not impossible, to fabricate by any other means than additive Solid Freeform Fabrication.
keywords	Architecture, Design, Solid Freefrom Fabrication, Senses
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

For more results click below: