Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 598

Reformat results as: short short into frame detailed detailed into frame

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	sigradi2003_094
id	sigradi2003_094
authors	Bessone, M., Mantovani, G. and Schanz, J.
year	2003
title	Multimedia y diseño arquitectónico diferente (Multimedia and different architectural design)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Hearing and touch may be incorporated into visual representation systems that historically covered creative process, now helped by multimedia. During 2002-2003 we developed an experimental design studio that challenged participants to design architecture from words (using their spelling, pronunciation, location, etc.) and through an inquiry based on the "concept of inwardness". Evoking a word from the association of images and texts as well as seizing its potential tactile and hearing dimensions completed what was a very interactive design process. Such process was utilized to generate images and ideas geared to design/make an "installation" to be displayed at art events.
keywords	Architecture, Design, Word, Image, Sound
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade03_397_180_bialas
id	ecaade03_397_180_bialas
authors	Bialas, Z., Glinkowska, A., Kepczynska-Walczak, A., Szrajber, R. and Urbaniak, M.
year	2003
title	The ICT as a Driving Force in The Field of Archaeological Research
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 397-402
doi	https://doi.org/10.52842/conf.ecaade.2003.397
summary	The paper is a contribution to the domain of computer tools for archaeological excavations and research. The present project described in this paper has been undertaken in close co-operation of specialists from two universities including archaeologists and architects from the CAAD unit. The project objective is to assess the suitability of new media offering an alternative to the traditional methods in archaeological practice.
keywords	Innovation; Research, Education & Practice; Integration of ICT withinarchaeological research
series	eCAADe
email
more	http://www.arch.p.lodz.pl
last changed	2022/06/07 07:52

_id	sigradi2003_012
id	sigradi2003_012
authors	Cabello, D., López, L. and López, M.
year	2003
title	Acido Surtido. Veintiocho miradas en formato editorial (Assorted Acid. Twenty eight views in publishing format)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Acido Surtido is a wide-ranging editorial project free of charge. Whose purpose is to create a place where visual thinking meets and juxtapose at random. Its active principles arise from the chaotic combination, in a 64 x 94 cm sheet of paper, of twenty eight graphic works developed in an independent and parallel way by an equal number of itinerant authors, and based on a frame topic from which plenty of visual ideas are launched. Through this "cadavre exquis" strategy, Acido Surtido calls on the reader's ability to re-elaborate and develop new interpretations, even new for those originally proposed by the authors. Acido Surtido is an offset printed centrefold, with an impression of 2000 copies.
keywords	Miradas, yuxtaposición, editorial.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	c5c5
id	c5c5
authors	Calderon, C., Cavazza M. and Diaz, D.
year	2003
title	A NEW APPROACH TO VIRTUAL DESIGN FOR SPATIAL CONFIGURATION PROBLEMS,
source	7th IEEE International Information Visualisation Conference, London, UK, 16-17 July 2003. http://www.graphicslink.demon.co.uk/IV03/
summary	In this paper, we present a new framework for the use of Virtual Reality (VR) in engineering design for configuration applications. Traditional VR systems support the visual exploration of a design solution but do not assist the user in exploring alternative solutions based on domain knowledge. Extending previous work in the area of Intelligent Virtual Environment, we propose an intelligent configuration system based on constraint logic programming (CLP), integrated in a real-time 3D graphic environment. This type of integration facilitates the expression of design knowledge in the VE and enables the user to interactively solve and/or refine a spatial configuration problem. In the system described in this paper, the user can visually explore configurations, but his interaction with objects of the configuration problem triggers new cycles of constraint propagation from the modified configuration to produce a new compatible solution.
keywords	Virtual Reality, Virtual Design
series	other
type	normal paper
email
last changed	2005/12/02 11:31

_id	sigradi2003_029
id	sigradi2003_029
authors	Castillo, M.R., Follonier, M.A., Vitale, M. and Kakisu, C.A.
year	2003
title	El Laboratorio de la imagen. Un agenciamiento performativo y enunciativo (The Laboratory of the image. A performance-based and declarative solution)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The laboratory is a practice that is characterized to allow the work transdiscipline where put on in action the contributions of each field epistemológico that are developed in the investigation project "Morphogénesis and Transformation of the Design in the Urban Atmosphere". The development that we will present in this congress, will show as the field of the digital intersects with other fields discipline in the different stages of the work that we deploy in the Laboratory from two positions: those of the students and those of the educational ones. We will expose in perspective a practice that takes the image like possibility.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	ecaade03_501_141_cumming
id	ecaade03_501_141_cumming
authors	Cumming, Michael
year	2003
title	Distributed and Constructed Knowledge in Design Education
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 501-504
doi	https://doi.org/10.52842/conf.ecaade.2003.501
summary	One aspect of design education to impart design information and theory, which from the students’ viewpoint may appear to be a static body of knowledge. This knowledge is imparted to them by parties with expertise in particular topics. This type of information could be called ‘received knowledge’: teachers teach it and students receive it. There is also a ‘constructive’ aspect to design education, in which students are expected to build their own personal knowledge bases, and to present a progression of design proposals that build from this personal knowledge. This kind of knowledge is much more difficult to share with others because it relies on require personal interpretation. If teachers and their students are considered to form a ‘knowledge hierarchy’, in which those at the top know more about a particular topic than those further down the hierarchy, then centralized information and knowledge systems appear appropriate. However, in design education, students can sometimes know more specialized knowledge about certain design situations than their teachers, and can also learn and construct things of value from their fellow students. In such situations, decentralized or peer-to-peer technologies become more attractive. This paper discussed some philosophical and technical aspects to the centralizing and sharing of design knowledge, with respect to emerging peer-topeer (P2P) communication technologies.
keywords	Knowledge hierarchies; knowledge decentralization; constructivism
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2003_107
id	sigradi2003_107
authors	da Silva Pereira, M., Couri Fabião, A., dos Reis, M.H. and Fonseca Nascimento, E.
year	2003
title	1931 Arte e Revolução: Lúcio Costa e a Reforma da Escola de Belas Artes (1931 Art and Revolution: Lúcio Costa and the School of Fine Arts)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The cd-rom 1931 Art and Revolution: Lucio Costa and the School of Fine Arts has been produced from newspaper excerpts published between November 1930 and October 1931, registering Lúcio Costa's term as director of the ENBA, the national school of Fine Arts, and the social-cultural context at the time. The transfer of the collected information to digital media aims to spread the knowledge of the selected events, making it possible for researchers to study the subject anywhere. This project represents a segment of the effort of our group, whose wider objective is to generate material and knowledge associated with the intellectual history of Brazilian architecture and urbanism, from the 19th and 20th centuries.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	c53f
authors	Dorau, U., Sanopoulos, A. and Schrenk, M.
year	2003
title	Erfahrungen und Erfolge bei der Umsetzung von RAPIS - Raum- und Projektinformationssystem für die Vienna Region [Experience and Results with the RAPS-System for the Viennese Region]
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	In shortest terms: RAPIS is a metadatabase on spatial information in the “Vienna Region”. More interesting then this simple fact is the way how theproject was implemented and what the effects on regional development are.RAPIS is the acronym for “Regional Planning and Project Information System for the Vienna Region” and was implemented as the Austrian part of the Interreg IIc Project IM-PLAN (Implementation of models for co-operative planning in metropolitan regions). The aim was to create aninformation platform for planning relevant information for the whole region, integrating existing data sources from federal and state administrationas well as private companies. RAPIS enables an overview of the available spatial datasets in the "Vienna Region " and focuses on the following questions: Which datasets relevant for planning and development are available within the region? Who can use these datasets under which conditions? Which plans and projects do exist for the region? In addition also metainformation on the most important international data sources was collected as well as information to projects and plans with regional and trans-regional impacts. During the implementation great importance was given to communication and sensitisation for the importance the topic: geo-informationinfrastructre as a key ressource for spatial development and regional co-operation. It showed up that Austria and the "Vienna Region" have a very good initial position and excellent databases on national, state, local and international level. However, it seems that almost everything exists already but hardly anybody knows about it ... – potential users do not know what data and information already exists and how to get and use it. Intensive communication, information and permanent discussion of the topic „(Geo-) Information“ within the „planners community“ carried the topic into the public and strengthened the consciousness for the importance of information-infrastructure for regional co-operation.
series	other
email
last changed	2003/03/11 20:39

_id	sigradi2003_056
id	sigradi2003_056
authors	Fabião, Aline Couri and Amim, Rodrigo Rosa
year	2003
title	Diagnóstico Digital Grande Méier (Digital diagnosis of the "Great Meier")
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The cd-rom Grande Méier - Digital Diagnosis was created to organize the information obtained from visits to the local studied in disciplines of the course of Architecture and Urbanism at the Federal University of Brazil. Whe made the visits using a digital8 video camera, trying to collect different kinds of information, from interviews to objects found in the streets. The cd-rom is a way to put together different kinds of information: the local material and the statistic graphics. We hope to bring new ideas to the concept of diagnostic products.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade03_017_136_franz
id	ecaade03_017_136_franz
authors	Franz, G., Von der Heyde, M. and Bülthoff, H.H.
year	2003
title	An empirical approach to the experience of architectural space in VR - Exploring relations between features and affective appraisals of rectangular interiors
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.2003.017
summary	While it is well known that the built environment influences our emotional state, it is often difficult to attribute these experiences to particular properties. In fact, a systematic investigation of the relation between physical structure and emotional experience of architecture has not yet been done. Now virtual reality simulations facilitate a completely controlled variation of spatial properties and thus allow to empirically evaluate architectural hypothesises. The aim of the presented study was to investigate which factors from a component-based description of rooms significantly correlate with cardinal dimensions of experience. In a perceptual experiment experiental qualities of 16 virtual vacant rectangular interiors were rated in eight principal categories by 16 participants using the semantic differential scaling technique. The scenes were generated by a custom made graphics tool that also automatically generated the component-based scene descriptions. The data analysis revealed several interesting correlations between scene features and rated experience: For example, a preference for ratios near to the golden section could be observed for spatial proportions, which are not directly perceivable. Altogether, a set of five independent factors (openness, two room proportions, room area and balustradeheight) appeared to be effective for widely describing the observed variance of the averaged attributed experiental qualities. Our combination of realistic virtual reality simulations and psychophysical data raising methods proved to be effective for basic architectural research. It allowed us to demonstrate quantitative relations between physical properties from a component-based description of architectural space and its emotional experience.
keywords	Experiental Qualities; Psychophysics; Correlation Analysis; Virtual Reality
series	eCAADe
email
more	http://www.kyb.tuebingen.mpg.de/~gf
last changed	2022/06/07 07:50

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	heylighen_ds2003
id	Heylighen DS2003
authors	Heylighen , Ann and Verstijnen, Ilse M.
year	2003
title	Close encounters of the architectural kind
source	Design Studies, Volume 24, Issue 4, 2003, pp. 313-326
summary	Throughout their career architects collect an extensive record of architectural cases, which they use as a source of inspiration and knowledge during design. Being novices, student architects do not yet have such a record. In order to compensate for this lack of knowledge, teachers in architecture engage their students into realistic yet simulated projects and introduce them to relevant architectural precedents for these projects. Within the realm of AI, case-based reasoning (CBR) stresses the importance of cases too. So far, however, applications that flow from CBR research have rarely found their way into architecture. The experiment that is reported in this article examines the conditions under which CBR technology can be useful in architectural education. The results show that in order for students to benefit from this technology, it should supply cases that are closely related to the project at hand. These results are consistent with psychological theories of knowledge representation in novices.
keywords	case-based reasoning; design education; analogical reasoning
series	journal paper
email
last changed	2004/03/25 17:57

_id	acadia03_052
id	acadia03_052
authors	Juyal, M., Kensek, K. and Knowles, R.
year	2003
title	SolCAD: 3D Spatial Design Tool Tool to Generate Solar Envelope
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 411-419
doi	https://doi.org/10.52842/conf.acadia.2003.411
summary	In this research the concept of Solar Envelope has been used to develop a 3D Spatial Design Tool tool, SolCAD, for generating an envelope over a given site based on various design parameters. The solar envelope can be imagined as a container, whose boundaries are derived from the sun’s relative motion. Buildings within this container will not overshadow their surroundings during critical periods of solar access for passive and low-energy architecture. The solar envelope is a space-time construct. Its spatial limits are defined by the parameters of land parcel size, shape, orientation, topography and latitude. It also depends on the time or the period of the time for which it is designed. Its time limits are defined by the hours of each day and the season for which solar access is provided to the land parcel (Knowles 1981). This tool intends to generate an envelope over a site of any shape, size and orientation and for different boundary and height conditions of shadow lines. It is suitable for initial stages of building design process to determine the shape of the building even before the design has been conceptualized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ecaade03_493_81_walczak
id	ecaade03_493_81_walczak
authors	Kepczynska-Walczak, Anetta and Walczak, Bartosz M.
year	2003
title	The Integration of IT within the Early Stage of Architectural Conservation Design A pedagogical experience
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 493-500
doi	https://doi.org/10.52842/conf.ecaade.2003.493
summary	This paper attempts to analyse the results of the multidisciplinary project focused on the holistic approach to education in the field of architectural history and conservation with an extensive use of computer technology. The skills trained usually separately within autonomous courses were brought together to form a “task force” project addressed to the students from two universities in different countries. The increased role of architectural design within a historical context and the need for the corresponding changes in the undergraduate course curricula is also stressed. What is more, the experiment revealed to be an interesting method of exploitation of the power of the computer as a design tool and, what is more, as a design stimulator in the early stage of the architectural design process. In this way the paper contributes also to the discussion on integration of IT within design studio.
keywords	Pedagogical strategy; CAAD curriculum; digital design education; integrationof IT within design process
series	eCAADe
email
more	http://www.arch.p.lodz.pl
last changed	2022/06/07 07:52

_id	sigradi2003_018
id	sigradi2003_018
authors	Kommonen, L.D. and Salgado, M.
year	2003
title	Interface design and usability testing in the digital facsimile of map of mexico 1550
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	This paper describes the usability test carried out as a part of the interface design to further develop the Digital Facsimile of Map of Mexico 1550. The working method used brought insights regarding the social and individual subjective experience involved in navigating an interactive piece. It also defined the guidelines for the design of a second version of the Digital Facsimile presented from May of 2003 at the Gropius Bau Museum in, Berlin, Germany. The Digital Facsimile of Map of Mexico 1550 is a work in progress of Systems of Representation research group in Media Lab (See: http://cipher.uiah.fi/Systems_of_representation). The Facsimile is being designed by Lily Díaz-Kommonen, Janne Pietarila, and Mariana Salgado.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade03_047_70_maher
id	ecaade03_047_70_maher
authors	Maher, M.L., Liew, P.-S., Gu, N. and Ding, L.
year	2003
title	An Agent Approach to Supporting Collaborative Design in 3D Virtual Worlds
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 47-52
doi	https://doi.org/10.52842/conf.ecaade.2003.047
summary	3D Virtual worlds facilitate a level of communication and collaboration not readily available in conventional CAD systems. The integration of virtual worlds and CAD systems using a common data model can make a significant impact on synchronous collaboration and real time multi-user multi-disciplinary modification of building data. By using agents, the integration of 3D virtual worlds and CAD systems can go beyond that of passive data transfer. With sensors and effectors, each agent can interact with its environment by responding to changes in the CAD system or 3D virtual world, which can take the form of an update to the geometry, or as a recommendation to change non geometric information or to propagate changes to other parts of the design. The reasoning process for each agent can vary from a reflexive behaviour in which the agent responds directly to the sensor data to a reflective behaviour in which the agents reasons about its goals and alternatives before making a change to the environment. We demonstrate this approach using ArchiCAD and Active Worlds as the CAD system and the virtual world platform. An EDM database is used as the central repository for storing the representation of the relevant data model. A multi-agent system is developed to connect the virtual world to this database to allow active data sharing. This agent approach can be extended to the integration of other applications and data models.
keywords	Design Collaboration, Virtual World, Agent and CAD
series	eCAADe
email
more	http://www.arch.usyd.edu.au/~mary
last changed	2022/06/07 07:59

_id	sigradi2004_151
id	sigradi2004_151
authors	María Estela Sánchez Cavazos
year	2004
title	La gráfica digital dentro del proceso de diseño caso: Talleres de arquitectura de la u.a.a. [Digital Graphics in the Design Process. Case: the U.A.A. Architectural Studio]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This work is developing at the moment, tries to find elements that allow arm to a frame of reference for a doctoral thesis that studies the processes of architectonic design and the transformations that this one within the factories of education with the introduction of the digital representation undergoes. It is a study that it initiates in the 2003 with an applied cuasi-experiment to students of the masters in architecture of the Independent University of Nuevo León (Monterrey, México), (work presented/displayed in the forum SIGraDi 2003). Taking into account the results obtained in that one first work it was decided not to take part and to force the student to work with a specific type of tool (digital or traditional), but to leave them chose the work tool freely, observing his photographic process by means of video-recordings, registries and personal interviews with the purpose of explaining because of his processes. The registries were taken in the Factory from semestral Architectonic Design 5°, of the Independent University of Aguascalientes (Mexico).
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: