Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 47

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2003_c3-4
id	caadria2003_c3-4
authors	Maneesatid, Preecha and Szalapaj, Peter
year	2003
title	The Role of CAD in Environmental Building Science
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 487-502
doi	https://doi.org/10.52842/conf.caadria.2003.487
summary	The fundamental requirement of all building design is the provision of shelter from the external climate and, if possible, the modification of environmental factors generated by this climate to create an internal environment suitable for human comfort. The environmental design strategies of modifying climate derive from the requirements of creating human comfort in buildings, using the elements of the natural climate which vary throughout the year depending upon the prevailing climatic conditions. Environmental Building Science (EBS) research and practice has investigated various techniques to increase architects' performance in environmental building design. These technical design options are also available to architects to take advantage of the external environment. Most environmental design techniques rely on convectional forms of passive environmental design, and building material and system. But it hardly begins to address the more complex demands of environmental building design issues in the buildings. Particularly, testing environmental design techniques against physical models requires much input data which is not available in the early design stages, and is time consuming to use. This forces architects to work with many design parameters that are not compatible with their activities. It is consequently difficult to observe the interrelation of design techniques with design development. The most important role of Computer Aided Design (CAD) is to integrate wider varieties of input data requirements, modelling with EBS properties, output representations with EBS knowledge and assistance tools for optimisation tasks in environmental design issues.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	avocaad_2003_09
id	avocaad_2003_09
authors	Alexander Asanowicz
year	2003
title	Form Follows Media - Experiences of Bialystok School of Architectural Composition
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	This paper considers transition from physical modelling to digital methods of the creation of architectural forms. Every type of creation has constructed the proper means of expression and its own methodology. The main thesis of this paper is that a specific character of the composition activity of an architect is determined by the modelling methods. As the research on architectural modelling, the two methods of creating spatial architectural forms (cardboard model and computer model) have been compared. Research has been done on the basis of the same exercise for both media. The process of creation proceeded in the same way, too. As the start point students have found the inspiration. Each student presented photos of existing architectural objects and a text, which explained the reasons of the choice. Next steps were sketches of the idea and realisation of the model. The achieved results of creative activity fully confirm the thesis of the research.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	avocaad_2003_06
id	avocaad_2003_06
authors	Arturo F. Montagu and Juan Pablo Cieri
year	2003
title	Urbamedia - Development of an urban database of fragments of some Argentinian and Latin-American cities using digital technology
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	The proposal of "Urbamedia" is to undertake the development of 3D virtual and interactive models of historical areas of Latin-American cities. The selected zone is the "Mayo Avenue" including the "Mayo Square", an historical place of the city of Buenos Aires, Argentina; this project is financed by the National Agency of Scientific and Technological Development of Argentina and the University of Buenos Aires.We are presenting the first experimental model of the "Mayo Square" that has been developed at ABACUS, Department of Architecture & Building Aids Computer Unit, University of Strathclyde UK. combined with a system analysis of urban activities using the “Atlas.ti” CAQDAS software.This particular use of the “Atlas.ti” software is under experimental applications to this type of urban analysis procedures; allowed us the possibility to analysed a set of activities by means of graph theory as result of a series of interviews to the people working in the area. We are also looking to include historical areas of three cities: Mar del Plata, Rosario and Santa Fe (Argentina) and eventually other cities from Latin América as Rio de Janeiro and Habana.Due that ABACUS has a strong experience in city modelling plus the powerful software and hardware used there, we must develop a VRML customized menu to be adapted to our low cost PC equipment. The 3D model will be used mainly in urban design simulation procedures and the idea is to extend to other type of simulations of the environmental parameters.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	ecaade03_587_34_asanowicz
id	ecaade03_587_34_asanowicz
authors	Asanowicz, Alexander
year	2003
title	Architectural Composition in Digital Space
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 587-590
doi	https://doi.org/10.52842/conf.ecaade.2003.587
summary	In this paper the possibilities of using the computers at course of architectural compositions are considered. As the start point of the new teaching method of architectural composition we used the course of tradition architectural composition, elaborated at our Faculty. The course of Digital Architectural Composition was finished in 2002. The main goal of using the new digital media for modelling architectural forms was checking the new possibilities of form creation. Traditionally, searching of forms at the conceptual design stage is performed by using sketches, drawings and physical models. Our new method showed that is possible to do the same thing using the computerbased 3D modelling, experiencing no physical limitations of the 'real' substance. At the same time, at the early design stages, when formal value is sought, computer modelling can be done almost intuitively. In ours work we try to find a creative way of using computer - transforming the tool into medium. The attention was paid on exploring the possibilities characteristic for computers and not available with traditional methods of modelling. Architect’s tradition tools are effectively replaced by a computer, which create a new way of doing things.
keywords	Architectural composition, computer modelling, method of teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c35c
authors	Bender, Oliver
year	2003
title	The Geographical Alpine Information System “Galpis” in the Raumalp Project. Outlay and Output
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	RAUMALP, an interdisciplinary research project of the Austrian Academy of Sciences, shall examine problem areas of spatial development on community level in the Austrian alpine region. The aim is the investigation of scientific basics for political decision finding, especially for the regional-specific realisation of the Alpine Convention. All ascertained information shall be included in “GALPIS”, a comprehensive Alpine Space Information System. GALPIS based on ESRI ArcGIS and MS Access software works with data from different sources, like ISIS, the electronic data base of Statistic Austria, and original data and maps gathered and elaborated by the working groups of RAUMALP. This also includes ecological raster data. Dealing with administrative units, „real“ space and raster space, RAUMALP will integrate the different space levels mostly to administrative spatial units representing the existing 1145 communities of the RAUMALP study area. This will be realised by overlay of grids, types of land use and communitypolygons. Major task of GALPIS is a conversion of former communal data (p. e. 1451 communities in 1951) that should represent the recent administrative boundaries. By this way it is possible to make thematic and time-integrative analyses of community data. GIS modelling of the six case studies is more complex. The conceptual model has to integrate several vector and raster layers such as land plots (“Digitale Katastralmappe”), types of land use (“Land Use and Land Cover Austria” by M. Seger) and biodiversity. P. e., the working group settlement is using a logical data model based on the entity “building” with the attributes “construction”,“function”, etc.
series	other
email
last changed	2003/11/21 15:16

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	cf2003_m_016
id	cf2003_m_016
authors	CHEN, Hong-Sheng and LIN, Feng-Tyan
year	2003
title	A Simulation Study on Public Building's Staircase Fault Tolerance
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 393-402
summary	This paper applies the concept of fault tolerance to staircase layout plan. Fire or smoke may cause some staircases in a building inaccessible. We argue that architects should assess the result from the possible fault of vertical routes. The capability of tolerating staircase faults depends on space usage, arrangement, and pedestrian attributes. In this study, a mathematical model is constructed. For analysing pedestrian's movement in interior space, we employ Monte Carol simulation and Agent-Based Modelling method in a CAAD environment. It helps us to visualise the dynamic process of agent's evacuation process, and to test the problem of possible staircase faults. Finally, a case study brings some important discoveries.
keywords	agents, fault tolerance, simulation
series	CAAD Futures
last changed	2003/09/22 12:21

_id	cf_2003_000
id	cf_2003_000
authors	Chiu, M.-L., Tsou, J.-Y., Kvan, Th., Morozumi, M. and Jeng, T.-S. (Eds.)
year	2003
title	Digital Design - Research and Practice
source	Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1 / Tainan (Taiwan) 13–15 October 2003, 464 p.
summary	The use of computers in the design of the built environment has reached a watershed. From peripheral devices in the design process, they have in recent years come to take centre stage. An illustration is immediately at hand. Just as the entries to the competition for the Chicago Tribune Tower in 1922 defined the state-of-the-art at the beginning of the twentieth century, we have a similar marker at the end of the century, the competition in 2002 to replace the World Trade Centre towers in Lower Manhattan offered us a range of architectural solutions that exemplified the state-of-the-art eighty years later, setting forth not only architectural statements but also illustrating clearly the importance of computers in the design of the built environment. In these entries of 2002, we can see that computers have not only become essential to the communication of design but in the investigation and generation of structure, form and composition. The papers in this book are the current state-of-the-art in computer-aided design as it stands in 2003. It is the tenth in a series sponsored by the CAAD Futures Foundation, compiled from papers presented at the biennial CAAD Futures Conferences. As a series, the publications have charted the steady progress in developing the theoretical and practical foundations for applications in design practice. This volume continues in that tradition; thus, this book is entitled Digital Design: Research and Practice. The papers are grouped into three major categories, reflecting thrusts of research and practice, namely: Data and information: its organisation, handling and access, including agents; Virtual worlds: their creation, application and interfaces; and Analysis and creation of form and fabric. The editors received 121 abstracts after the initial call for contributions. From these, 61 abstracts were selected for development into complete papers for further review. From these submissions, 39 papers were chosen for inclusion in this publication. These papers show that the field has evolved from theoretical and development concerns to questions of practice in the decade during which this conference has showcased leading work. Questions of theoretical nature remain as the boundaries of our field expand. As design projects have grasped the potentials of computer-aided design, so have they challenged the capabilities of the tools. Papers here address questions in geometric representation and manipulation (Chiu and Chiu; Kocaturk, Veltkamp and Tuncer), topics that may have been considered to be solved. As design practice becomes increasingly knowledge based, better ways of managing, manipulating and accessing the complex wealth of design information becomes more pressing, demanding continuing research in issues such as modelling (Yang; Wang; Zreik et al), data retrieval and querying (Hwang and Choi; Stouffs and Cumming; Zreik, Stouffs, Tuncer, Ozsariyildiz and Beheshti), new modes of perceiving data (Segers; Tan). Tools are needed to manage, mine and create information for creative work, such as agents (Liew and Gero; Smith; Caneparo and Robiglio; Ding et al) or to support design processes (Smith; Chase). Systems for the support and development of designs continue (Gero; Achten and Jessurun). As progress is made on some fronts, such as user interfaces, attention is again turned to previously research areas such as lighting (Jung, Gross and Do; Ng et al; Wittkopf; Chevier; Glaser, Do and Tai) or services (Garcia; Chen and Lin). In recent years the growth of connectivity has led to a rapid growth in collaborative experience and understanding of the opportunities and issues continues to mature (Jabi; Dave; Zamenopoulos and Alexiou). Increasing interest is given to implications in practice and education (Dave; Oxman; Caneparo, Grassi and Giretti). Topics new to this conference are in the area of design to production or manufacture (Fischer, Burry and Frazer; Shih). Three additional invited papers (Rekimoto; Liu; Kalay) provide clear indication that there is still room to develop new spatial concepts and computer augmented environments for design. In conclusion, we note that these papers represent a good record of the current state of the evolving research in the field of digital design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/
last changed	2003/09/22 12:21

_id	fd5c
id	fd5c
authors	Derix C and Simon C
year	2003
title	Morphogenetic CA: 69’ 40’ 33 north
source	Proceedings of the Generative Arts conference, Milan, 2003
summary	We would like to present some recent work using cellular automata and agent modelling for the generative design of building configurations. The cellular automata is based on a 3d terrain model of a site (taken from the recent Europan competition) which is encoded with both topological and economic data, and agents that are light sensitive and which reconfigure the developing architecture by checking overshadowing and spatial occupation. The emergent pattern of development therefore results from an understanding of the programmatic and the spatial parameters of the task, and is intimately related to the site and its peculiarities.
keywords	urban planning, cellular automata, agent modelling, solar performance, hierarchical massing
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 21:37

_id	acadia03_006
id	acadia03_006
authors	Dobson, Adrian and Lancaric, Peter
year	2003
title	VIRTUreALITY Digital Urban Modelling as a Community Design Form
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 49-53
doi	https://doi.org/10.52842/conf.acadia.2003.049
summary	This paper describes a practice-led research project that investigates the application of digital modelling and communication technologies in urban and architectural design. The project is being carried out by our team with the collaboration of the architecture and planning departments at local borough council and local community participation. The main methodology for the project revolves around the evolution of an interactive three-dimensional digital urban model, which incorporates a variety of visual, graphic and numeric data. This digital model is utilised within a web site to help facilitate a participatory approach to the physical and social regeneration of an inner urban zone, in terms of both the built environment and the attempted creation of a virtual community.
series	ACADIA
last changed	2022/06/07 07:55

_id	ecaade03_083_03_dobson
id	ecaade03_083_03_dobson
authors	Dobson, Adrian and Lancaric, Peter
year	2003
title	From Virtuality to Reality - Collaborative Digital Design in the Urban Environment
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 83-87
doi	https://doi.org/10.52842/conf.ecaade.2003.083
summary	This paper describes work in progress on a collaborative project being undertaken by the Department of Art and Design at the University of Luton with the architecture and planning departments at Luton Borough Council and community participation. Focussing on the Plaiters Lea urban zone in Luton, the project uses a three-dimensional digital urban model of the townscape, as a collaborative design and communication tool for urban regeneration. The proposals being developed include elements of architectural and urban design, landscape design and public art. The philosophical motivation for the project is that of the community architecture and arts movements, in which a wide constituency of stakeholders is involved in the evolution of design proposals. The digital model is the key feature of a world-wide-web site that facilitates the exchange of design data between the participants. Digital modelling work has been used for undergraduate CAD skills development, and students are contributing design proposals as part of their studio work. Hence the project also has a pedagogic component.
series	eCAADe
email
more	http://www.luton.ac.uk
last changed	2022/06/07 07:55

_id	sigradi2004_110
id	sigradi2004_110
authors	Eliane Schlemmer; Luciana Backes; Aline Andrioli; Carine Barcellos Duarte
year	2004
title	Awsinos: Construção de um mundo virtual [Awsinos: Construction of a Virtual World]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The course Alternatives of Design is part of an integral viewpoint that aims to prepare architects from the Master Studies Department in Computing in Architecture (LUZ), in two ways: first, by expanding their perspective about potentialities of using new digital technologies in architecture, and second, by qualifying them to apply this acquired theoretical knowledge in their professional environment. The objectives of this paper are to describe the program of this course and to show products (2003), from the introductory to the final presentation of Virtual Museums of Interactive Sculptures, orientated and supervised both at site and at a distance through the Internet. As a result of this experience, a sample was obtained of virtual museums. design and modelling that illustrates what could be understood as virtual architecture with high degree of interaction, looking for the evolution, motivation and teamwork to incorporate virtual reality non-inmersive technologies in this new architectonic approach.
keywords	VRML, virtual museums, interactive sculptures, alternatives of design
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade03_541_131_fiamma
id	ecaade03_541_131_fiamma
authors	Fiamma, Paolo
year	2003
title	Object oriented Thinking for Technical Architecture Modelling
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 541-546
doi	https://doi.org/10.52842/conf.ecaade.2003.541
summary	Today it is increasingly important to focus the efforts of research on thinking about the great innovation introduced by digital 3D modelling in the housing sector, not only in the merits but also in the methods of the designing conception. Thinking of an object-orientated constructive 3D model does not only mean to represent it, but to conceive it, by generating it within an existing although virtual space. This encourages one to focus not only on the formal and compositive side, but also on the technical and technological side of the future building, whose constructive components are brought in, arranged and above all connected within the virtual building, as will happen in the practice of building, according to the building rules.
keywords	Virtual Architecture, 3D Model, Object Oriented, Project Thinking
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade03_381_134_fischer
id	ecaade03_381_134_fischer
authors	Fischer, Michal
year	2003
title	Digital Czech Cubism
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 381-386
doi	https://doi.org/10.52842/conf.ecaade.2003.381
summary	Cubism is one of the great phenomena of Czech architecture and the use of digital technology opens up a new aspect of its significance. Digital models of both realised and unrealised buildings are becoming an important aid for research into the history of architecture and the teaching of this subject. The very process of the creation of the models enables deeper understanding of the principles of Cubist architecture.
keywords	3D modelling; Virtual architecture; history research
series	eCAADe
email
more	http://web.cvut.cz/fa/u516/
last changed	2022/06/07 07:50

_id	cf2003_m_066
id	cf2003_m_066
authors	Frank Li-Jan WANG
year	2003
title	Development of a New CIS/2 (CIMsteel Integration Standards) Model Viewer
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 83-92
summary	The purpose of developing a CIS/2 data viewer is not only to facilitate software developers to visualise exported CIS/2 files and to validate geometric correctness, but also to provide non-3D-model-based CIS/2 applications with an interface for geometric visualisation and complex 3D-spatial computation. The GT CIS/2 Model viewer enhances the functionality of existing data viewers and proposes a new visualisation method for a CIS/2 model.
keywords	ACIS, CIS/2, EXPRESS, HOOPS, STEP, solid modelling
series	CAAD Futures
last changed	2003/09/22 12:21

_id	cf2003_m_097
id	cf2003_m_097
authors	FRÖST, Peter
year	2003
title	A Real Time 3D Environment for Collaborative Design
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 203-212
summary	By setting up collaborative design processes in architecture it is possible to considerably improve the integration of customer needs and ideas into the programming phase of a building project. Our design process includes active collaboration between customers, users and other stakeholders as well as the use of virtual environments in conceptual design. The output from the process is treated as visualised input to the architectural programming. The work presented focuses on developing digital tools to support this collaborative design dialogue. We have developed an extremely “easy to use” digital modelling tool called “ForeSite Designer”. The tool enables the users to build layouts of prefabricated components on a building site in 2D. This 2D layout can then instantly be exported to a lit-up real time 3D environment in the computer game “Half-Life.” ForeSite Designer has been used in a several design events with different settings. This paper presents the tool and one project where it was utilized. The results show that ForeSite Designer can promote dialogue and collaborative design work among the participants. We have also found that it is important how the virtual environment and its components are visually designed in order to support the dialogue and collaborative design work.
keywords	collaboration, customer, real time, virtual environment
series	CAAD Futures
last changed	2003/09/22 12:21

_id	cf2003_m_060
id	cf2003_m_060
authors	GLASER, D., VOUNG, J., XIAO, L., TAI, B., UBBELOHDE M.S., CANNY, J. and DO, E. Y.-L.
year	2003
title	LightSketch - A Sketch-Modelling Program for Lighting Analysis
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 371-382
summary	This paper presents a flexible, yet powerful lighting analysis tool, LightSketch. LightSketch is a sketch-based modelling program for lighting analysis. It allows the user to draw both architectural and lighting related symbols which are converted into a 3D model for lighting visualisation. It is motivated by examining the strengths and limitations of current lighting design practices. Its use is illustrated with design scenarios.
keywords	sketch, lighting, simulation
series	CAAD Futures
email
last changed	2004/10/04 07:49

_id	ecaade03_265_31_ham
id	ecaade03_265_31_ham
authors	Ham, Jeremy J.
year	2003
title	The Computer as a Tectonic Design Tool: Comparisons between Virtual and Actual Construction
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 265-268
doi	https://doi.org/10.52842/conf.ecaade.2003.265
summary	The potential of the computer as a tectonic design tool is explored in comparison to scaled physical models, drawings and real-scale modelling (actual construction). Analysis of media use is undertaken in a case study of a range of design projects of differing emphases in relation to student perceptions and assessment. Relationships are drawn between representational media actual construction to inform a discussion of effective and authentic means of teaching tectonics within the design studio.
keywords	Tectonics, 3D CAD, real-scale modelling
series	eCAADe
email
more	http:/www.ab.deakin.edu.au/online
last changed	2022/06/07 07:50

_id	avocaad_2003_18
id	avocaad_2003_18
authors	Henri Achten, Jos van Leeuwen and Sverker Fridqvist
year	2003
title	Communicating Concepts for Shared Understanding: A Multi-Agent Approach
source	LOCAL VALUES in a NETWORKED DESIGN WORLD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Stellingwerff, Martijn and Verbeke, Johan (Eds.), (2004) DUP Science - Delft University Press, ISBN 90-407-2507-1.
summary	Capturing and sharing design concepts is necessary if we want to support the design process by means of Information & Communication Technology (ICT). Standardized concepts are important for support at the end of the design process when designs need to conform to set standards and norms, and in order to enable communication, but are less useful in the early design stages. We propose an approach that takes into account a more developmental attitude that will be better suited for design support and the sharing of design concepts. In this approach, design concepts are formalised by means of a technology called concept modelling. Capturing and exchange of concepts are based on a multi-agent approach. The whole of concepts that are used in a domain or for a design task can be considered a design ontology. In this paper we outline the motivations for the research, outline the basic approach in the research work, and identify the major challenges and research problems that need to be tackled.
keywords	Architecture, Local values, Globalisation, Computer Aided Architectural Design
series	AVOCAAD
email
last changed	2006/01/16 21:38

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
doi	https://doi.org/10.52842/conf.ecaade.2004.024
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: